hostapd: package wpad-mesh and wpa_supplicant-mesh variants

These new variants include support for mesh mode and SAE crypto.
They always depend on openssl as EC operations are not provided by
the internal crypto implementation.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45047

3 files changed, 453 insertions, 11 deletions

diff --git a/package/network/services/hostapd/Config.in b/package/network/services/hostapd/Config.in
index b39be38fd0..65125a36df 100644
--- a/package/network/services/hostapd/Config.in
+++ b/package/network/services/hostapd/Config.in
@@ -1,7 +1,7 @@
 # wpa_supplicant config
 config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
 	bool "Disable timestamp check"
-	depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
+	depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini || PACAKGE_wpad-mesh
 	default n
 	help
 	  This disables the timestamp check for certificates in wpa_supplicant
@@ -10,10 +10,11 @@ config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
 choice
 	prompt "Choose TLS provider"
 	default WPA_SUPPLICANT_INTERNAL
-	depends on PACKAGE_wpa-supplicant || PACKAGE_wpad
+	depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpad || PACKAGE_wpad-mesh
 
 config WPA_SUPPLICANT_INTERNAL
 	bool "internal"
+	depends on PACKAGE_wpa-supplicant || PACKAGE_wpad
 
 config WPA_SUPPLICANT_OPENSSL
 	bool "openssl"
@@ -23,7 +24,7 @@ endchoice
 
 config WPA_RFKILL_SUPPORT
 	bool "Add rfkill support"
-	depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
+	depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini || PACKAGE_wpad-mesh
 	default n
 
 config WPA_MSG_MIN_PRIORITY
diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile
index 3b45324493..b9a705143f 100644
--- a/package/network/services/hostapd/Makefile
+++ b/package/network/services/hostapd/Makefile
@@ -1,4 +1,3 @@
-#
 # Copyright (C) 2006-2014 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
@@ -48,6 +47,10 @@ ifeq ($(LOCAL_TYPE),supplicant)
 		CONFIG_WPA_SUPPLICANT_INTERNAL \
 		CONFIG_WPA_SUPPLICANT_OPENSSL
   endif
+  ifeq ($(LOCAL_VARIANT),mesh)
+    PKG_CONFIG_DEPENDS += \
+		CONFIG_WPA_SUPPLICANT_OPENSSL
+  endif
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -74,6 +77,10 @@ ifneq ($(LOCAL_TYPE),hostapd)
       TARGET_LDFLAGS += -lcrypto -lssl
     endif
   endif
+  ifeq ($(LOCAL_VARIANT),mesh)
+    DRIVER_MAKEOPTS += CONFIG_TLS=openssl
+    TARGET_LDFLAGS += -lcrypto -lssl
+  endif
   ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
     TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK
   endif
@@ -103,7 +110,7 @@ define Package/hostapd
 $(call Package/hostapd/Default)
   TITLE+= (full)
   VARIANT:=full
-  CONFLICTS:=wpad wpad-mini
+  CONFLICTS:=wpad wpad-mini wpad-mesh
 endef
 
 define Package/hostapd/description
@@ -115,7 +122,7 @@ define Package/hostapd-mini
 $(call Package/hostapd/Default)
   TITLE+= (WPA-PSK only)
   VARIANT:=mini
-  CONFLICTS:=wpad wpad-mini
+  CONFLICTS:=wpad wpad-mini wpad-mesh
 endef
 
 define Package/hostapd-mini/description
@@ -125,7 +132,7 @@ endef
 define Package/hostapd-utils
   $(call Package/hostapd/Default)
   TITLE+= (utils)
-  DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini
+  DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mesh||PACKAGE_wpad-mini
 endef
 
 define Package/hostapd-utils/description
@@ -163,13 +170,25 @@ define Package/wpad-mini/description
  This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
 endef
 
+define Package/wpad-mesh
+$(call Package/wpad/Default)
+  TITLE+= (with 802.11s mesh and SAE support)
+  DEPENDS:=$(DRV_DEPENDS) +libubus +libopenssl +@CONFIG_WPA_SUPPLICANT_OPENSSL
+  CONFLICTS:=@WPA_SUPPLICANT_INTERNAL
+  VARIANT:=wpad-mesh
+endef
+
+define Package/wpad-mesh/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
+endef
+
 define Package/wpa-supplicant
   SECTION:=net
   CATEGORY:=Network
   TITLE:=WPA Supplicant
   URL:=http://hostap.epitest.fi/wpa_supplicant/
   DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl
-  CONFLICTS:=wpad wpad-mini
+  CONFLICTS:=wpad wpad-mini wpad-mesh
   VARIANT:=supplicant-full
 endef
 
@@ -185,7 +204,7 @@ define Package/wpa-supplicant-p2p
   $(Package/wpa-supplicant)
   TITLE:=WPA Supplicant (with Wi-Fi P2P support)
   DEPENDS:=$(DRV_DEPENDS)
-  CONFLICTS:=wpad wpad-mini
+  CONFLICTS:=wpad wpad-mini wpad-mesh
   VARIANT:=supplicant-p2p
 endef
 
@@ -193,11 +212,23 @@ define Package/wpa-supplicant-p2p/Description
   WPA Supplicant (with Wi-Fi P2P support)
 endef
 
+define Package/wpa-supplicant-mesh
+  $(Package/wpa-supplicant)
+  TITLE:=WPA Supplicant (with 802.11s and SAE)
+  DEPENDS:=$(DRV_DEPENDS)
+  CONFLICTS:=wpad wpad-mesh wpad-mesh
+  VARIANT:=supplicant-mesh
+endef
+
+define Package/wpa-supplicant-mesh/Description
+  WPA Supplicant (variant with 802.11s and SAE support)
+endef
+
 define Package/wpa-supplicant-mini
   $(Package/wpa-supplicant)
   TITLE:=WPA Supplicant (minimal version)
   DEPENDS:=$(DRV_DEPENDS)
-  CONFLICTS:=wpad wpad-mini
+  CONFLICTS:=wpad wpad-mini wpad-mesh
   VARIANT:=supplicant-mini
 endef
 
@@ -208,7 +239,7 @@ endef
 define Package/wpa-cli
   SECTION:=net
   CATEGORY:=Network
-  DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpa-supplicant-p2p||PACKAGE_wpad-mini||PACKAGE_wpad
+  DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpa-supplicant-p2p||PACKAGE_wpad-mini||PACKAGE_wpad||PACKAGE_wpad-mesh
   TITLE:=WPA Supplicant command line interface
 endef
 
@@ -372,6 +403,7 @@ define Package/wpad/install
 	$(LN) wpad $(1)/usr/sbin/wpa_supplicant
 endef
 Package/wpad-mini/install = $(Package/wpad/install)
+Package/wpad-mesh/install = $(Package/wpad/install)
 
 define Package/wpa-supplicant/install
 	$(call Install/supplicant,$(1))
@@ -397,8 +429,10 @@ endif
 $(eval $(call BuildPackage,hostapd))
 $(eval $(call BuildPackage,hostapd-mini))
 $(eval $(call BuildPackage,wpad))
+$(eval $(call BuildPackage,wpad-mesh))
 $(eval $(call BuildPackage,wpad-mini))
 $(eval $(call BuildPackage,wpa-supplicant))
+$(eval $(call BuildPackage,wpa-supplicant-mesh))
 $(eval $(call BuildPackage,wpa-supplicant-mini))
 $(eval $(call BuildPackage,wpa-supplicant-p2p))
 $(eval $(call BuildPackage,wpa-cli))
diff --git a/package/network/services/hostapd/files/wpa_supplicant-mesh.config b/package/network/services/hostapd/files/wpa_supplicant-mesh.config
new file mode 100644
index 0000000000..36e29088c4
--- /dev/null
+++ b/package/network/services/hostapd/files/wpa_supplicant-mesh.config
@@ -0,0 +1,407 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#	-I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+CONFIG_NO_RANDOM_POOL=y
+NEED_80211_COMMON=y
+
+CONFIG_IBSS_RSN=y
+
+CONFIG_MESH=y
+CONFIG_SAE=y
+CONFIG_AP=y