diff options
author | John Crispin <john@openwrt.org> | 2014-06-02 13:10:53 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2014-06-02 13:10:53 +0000 |
commit | 520fe28adffbebf377525bf9ff5cef21e70f85b5 (patch) | |
tree | 2814f9ae755fae06e0303935ac3af4328e2427d5 /package/network/utils/iwinfo/src/api/nl80211.h | |
parent | f3aa8a8cf41ac4df18a2409f6595a3ddc866de7b (diff) | |
download | upstream-520fe28adffbebf377525bf9ff5cef21e70f85b5.tar.gz upstream-520fe28adffbebf377525bf9ff5cef21e70f85b5.tar.bz2 upstream-520fe28adffbebf377525bf9ff5cef21e70f85b5.zip |
iwinfo: update nl80211 api to the latest one
modified version of http://patchwork.openwrt.org/patch/4533/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40954
Diffstat (limited to 'package/network/utils/iwinfo/src/api/nl80211.h')
-rw-r--r-- | package/network/utils/iwinfo/src/api/nl80211.h | 1618 |
1 files changed, 1478 insertions, 140 deletions
diff --git a/package/network/utils/iwinfo/src/api/nl80211.h b/package/network/utils/iwinfo/src/api/nl80211.h index d73dcb8e81..e9b09077cf 100644 --- a/package/network/utils/iwinfo/src/api/nl80211.h +++ b/package/network/utils/iwinfo/src/api/nl80211.h @@ -27,6 +27,8 @@ #include <linux/types.h> +#define NL80211_GENL_NAME "nl80211" + /** * DOC: Station handling * @@ -36,7 +38,21 @@ * The station is still assumed to belong to the AP interface it was added * to. * - * TODO: need more info? + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types */ /** @@ -110,6 +126,31 @@ */ /** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -118,8 +159,9 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the + * attributes determining the channel width; this is used for setting + * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL @@ -156,21 +198,26 @@ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * - * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a - * %NL80222_CMD_NEW_BEACON message) - * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface - * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. - * Following attributes are provided for drivers that generate full Beacon - * and Probe Response frames internally: %NL80211_ATTR_SSID, + * @NL80211_CMD_GET_BEACON: (not used) + * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL + * attributes. For drivers that generate the beacon and probe responses + * internally, the following attributes must be provided: %NL80211_ATTR_IE, + * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters + * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that + * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, + * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, - * %NL80211_ATTR_IE_ASSOC_RESP. - * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, - * parameters are like for %NL80211_CMD_SET_BEACON. - * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP * * @NL80211_CMD_GET_STATION: Get station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. @@ -256,8 +303,9 @@ * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan * results available. * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has @@ -273,6 +321,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -363,10 +417,25 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration + * in driver is used and if period value is 0, bg scan will be disabled. + * This attribute is ignored if driver does not support roam scan. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be * determined by the STATUS_CODE attribute. @@ -386,8 +455,7 @@ * a response while being associated to an AP on another channel. * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. + * frequency for the operation. * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the @@ -425,17 +493,19 @@ * as an event indicating reception of a frame that was not processed in * kernel code, but is for us (i.e., which may need to be processed in a * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -447,6 +517,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -454,8 +528,8 @@ * command is used as an event to indicate the that a trigger level was * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -480,9 +554,11 @@ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a * beacon or probe response from a compatible mesh peer. This is only * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from * reoccurring, the userspace authentication daemon may want to create the * new station with the AUTHENTICATED flag unset and maybe change it later * depending on the authentication result. @@ -494,6 +570,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -507,7 +589,20 @@ * of PMKSA caching dandidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). - * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The + * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be + * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as + * 802.11 management frames, while TDLS action codes (802.11-2012 + * 8.5.13.1) will be encapsulated and sent as data frames. The currently + * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES + * and the currently supported TDLS actions codes are given in + * &enum ieee80211_tdls_actioncode. * * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP * (or GO) interface (i.e. hostapd) to ask for unexpected frames to @@ -541,6 +636,92 @@ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether * No Acknowledgement Policy should be applied. * + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. + * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with + * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the + * P2P Device can be used for P2P operations, e.g. remain-on-channel and + * public action frame TX. + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. + * + * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to + * notify userspace that AP has rejected the connection request from a + * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON + * is used for this. + * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * + * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running + * a critical protocol that needs more reliability in the connection to + * complete. + * + * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can + * return back to normal. + * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * + * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified + * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in + * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in + * %NL80211_ATTR_VENDOR_DATA. + * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is + * used in the wiphy data as a nested attribute containing descriptions + * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. + * This may also be sent as an event with the same attributes. + * + * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. + * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If + * that attribute is not included, QoS mapping is disabled. Since this + * QoS mapping is relevant for IP packets, it is only valid during an + * association. This is cleared on disassociation and AP restart. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -565,8 +746,10 @@ enum nl80211_commands { NL80211_CMD_GET_BEACON, NL80211_CMD_SET_BEACON, - NL80211_CMD_NEW_BEACON, - NL80211_CMD_DEL_BEACON, + NL80211_CMD_START_AP, + NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, + NL80211_CMD_STOP_AP, + NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, NL80211_CMD_GET_STATION, NL80211_CMD_SET_STATION, @@ -680,6 +863,36 @@ enum nl80211_commands { NL80211_CMD_SET_NOACK_MAP, + NL80211_CMD_CH_SWITCH_NOTIFY, + + NL80211_CMD_START_P2P_DEVICE, + NL80211_CMD_STOP_P2P_DEVICE, + + NL80211_CMD_CONN_FAILED, + + NL80211_CMD_SET_MCAST_RATE, + + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + + NL80211_CMD_GET_PROTOCOL_FEATURES, + + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + + NL80211_CMD_CRIT_PROTOCOL_START, + NL80211_CMD_CRIT_PROTOCOL_STOP, + + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + + NL80211_CMD_CHANNEL_SWITCH, + + NL80211_CMD_VENDOR, + + NL80211_CMD_SET_QOS_MAP, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -716,14 +929,26 @@ enum nl80211_commands { * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is * less than or equal to the RTS threshold; allowed range: 1..255; * dot11ShortRetryLimit; u8 @@ -743,6 +968,9 @@ enum nl80211_commands { * @NL80211_ATTR_IFNAME: network interface name * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * * @NL80211_ATTR_MAC: MAC address (various uses) * * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of @@ -753,6 +981,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -777,7 +1012,8 @@ enum nl80211_commands { * consisting of a nested array. * * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path * info given for %NL80211_CMD_GET_MPATH, nested attribute described at @@ -792,7 +1028,7 @@ enum nl80211_commands { * to query the CRDA to retrieve one regulatory domain. This attribute can * also be used by userspace to query the kernel for the currently set * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11d country information element to identify a country. + * IEEE-802.11 country information element to identify a country. * Users can also simply ask the wireless core to set regulatory domain * to a specific alpha2. * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory @@ -880,7 +1116,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. @@ -988,6 +1224,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1045,7 +1283,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1058,10 +1296,10 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver * allows auth frames in a mesh to be passed to userspace for processing via * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. * * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy * capabilities, the supported WoWLAN triggers @@ -1069,10 +1307,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1099,7 +1337,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1166,7 +1404,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -1193,6 +1430,170 @@ enum nl80211_commands { * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of * up to 16 TIDs. * + * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be + * used by the drivers which has MLME in firmware and does not have support + * to report per station tx/rx activity to free up the staion entry from + * the list. This needs to be used when the driver advertises the + * capability to timeout the stations. + * + * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); + * this attribute is (depending on the driver capabilities) added to + * received frames indicated with %NL80211_CMD_FRAME. + * + * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds + * or 0 to disable background scan. + * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * + * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected + * the connection request from a station. nl80211_connect_failed_reason + * enum has different reasons of connection failure. + * + * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts + * with the Authentication transaction sequence number field. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * + * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased + * reliability, see &enum nl80211_crit_proto_id (u16). + * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which + * the connection should have increased reliability (u16). + * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel + * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel + * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * + * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. + * + * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported + * supported operating classes. + * + * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space + * controls DFS operation in IBSS mode. If the flag is included in + * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS + * channels and reports radar events to userspace. Userspace is required + * to react to radar events, e.g. initiate a channel switch or leave the + * IBSS network. + * + * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports + * 5 MHz channel bandwidth. + * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports + * 10 MHz channel bandwidth. + * + * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode + * Notification Element based on association request when used with + * %NL80211_CMD_NEW_STATION; u8 attribute. + * + * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if + * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) + * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command + * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this + * attribute is also used for vendor command feature advertisement + * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy + * info, containing a nested array of possible events + * + * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This + * data is in the format defined for the payload of the QoS Map Set element + * in IEEE Std 802.11-2012, 8.4.2.97. + * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1438,6 +1839,103 @@ enum nl80211_attrs { NL80211_ATTR_NOACK_MAP, + NL80211_ATTR_INACTIVITY_TIMEOUT, + + NL80211_ATTR_RX_SIGNAL_DBM, + + NL80211_ATTR_BG_SCAN_PERIOD, + + NL80211_ATTR_WDEV, + + NL80211_ATTR_USER_REG_HINT_TYPE, + + NL80211_ATTR_CONN_FAILED_REASON, + + NL80211_ATTR_SAE_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + + NL80211_ATTR_CRIT_PROT_ID, + NL80211_ATTR_MAX_CRIT_PROT_DURATION, + + NL80211_ATTR_PEER_AID, + + NL80211_ATTR_COALESCE_RULE, + + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + + NL80211_ATTR_STA_SUPPORTED_CHANNELS, + + NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, + + NL80211_ATTR_HANDLE_DFS, + + NL80211_ATTR_SUPPORT_5_MHZ, + NL80211_ATTR_SUPPORT_10_MHZ, + + NL80211_ATTR_OPMODE_NOTIF, + + NL80211_ATTR_VENDOR_ID, + NL80211_ATTR_VENDOR_SUBCMD, + NL80211_ATTR_VENDOR_DATA, + NL80211_ATTR_VENDOR_EVENTS, + + NL80211_ATTR_QOS_MAP, + + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + + NL80211_ATTR_TDLS_PEER_CAPABILITY, + + NL80211_ATTR_IFACE_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1481,10 +1979,18 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + +#define NL80211_CQM_TXE_MAX_INTVL 1800 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1500,6 +2006,10 @@ enum nl80211_attrs { * @NL80211_IFTYPE_MESH_POINT: mesh point * @NL80211_IFTYPE_P2P_CLIENT: P2P client * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -1518,6 +2028,7 @@ enum nl80211_iftype { NL80211_IFTYPE_MESH_POINT, NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, /* keep last */ NUM_NL80211_IFTYPES, @@ -1542,6 +2053,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1553,12 +2067,15 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 }; +#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER + /** * struct nl80211_sta_flag_update - station flags mask/set * @mask: mask of station flags to set @@ -1576,13 +2093,26 @@ struct nl80211_sta_flag_update { * * These attribute types are used with %NL80211_STA_INFO_TXRATE * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. * * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -1591,6 +2121,12 @@ enum nl80211_rate_info { NL80211_RATE_INFO_MCS, NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -1637,6 +2173,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1657,8 +2195,17 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1682,8 +2229,15 @@ enum nl80211_sta_info { NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1753,6 +2307,9 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -1766,6 +2323,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_HT_AMPDU_FACTOR, NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -1779,26 +2339,76 @@ enum nl80211_band_attr { * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. - * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is - * permitted on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted - * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a + * channel that has the GO_CONCURRENT attribute set can be done when there + * is a clear assessment that the device is operating under the guidance of + * an authorized master, i.e., setting up a GO while the device is also + * connected to an AP with DFS and radar detection on the UNII band (it is + * up to user-space, i.e., wpa_supplicant to perform the required + * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, NL80211_FREQUENCY_ATTR_FREQ, NL80211_FREQUENCY_ATTR_DISABLED, - NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, - NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_NO_IR, + __NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -1806,6 +2416,9 @@ enum nl80211_frequency_attr { }; #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER +#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR /** * enum nl80211_bitrate_attr - bitrate attributes @@ -1886,12 +2499,14 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -1907,6 +2522,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, NL80211_ATTR_POWER_RULE_MAX_EIRP, + NL80211_ATTR_DFS_CAC_TIME, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 @@ -1916,7 +2533,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -1924,7 +2549,8 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1932,6 +2558,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * @@ -1942,8 +2571,12 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_DFS: DFS support is required to be used * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links - * @NL80211_RRF_PASSIVE_SCAN: passive scan is required - * @NL80211_RRF_NO_IBSS: no IBSS is allowed + * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, + * this includes probe requests or modes of operation that require + * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -1953,17 +2586,25 @@ enum nl80211_reg_rule_flags { NL80211_RRF_DFS = 1<<4, NL80211_RRF_PTP_ONLY = 1<<5, NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_PASSIVE_SCAN = 1<<7, - NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, }; +#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR + +/* For backport compatibility with older userspace */ +#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) + /** * enum nl80211_dfs_regions - regulatory DFS regions * * @NL80211_DFS_UNSET: Country has no DFS master region specified - * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC - * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI - * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec + * @NL80211_DFS_FCC: Country follows DFS master rules from FCC + * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI + * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec */ enum nl80211_dfs_regions { NL80211_DFS_UNSET = 0, @@ -1973,6 +2614,29 @@ enum nl80211_dfs_regions { }; /** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, +}; + +/** * enum nl80211_survey_info - survey information * * These attribute types are used with %NL80211_ATTR_SURVEY_INFO @@ -2025,6 +2689,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. * * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag @@ -2036,6 +2702,7 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_CONTROL, NL80211_MNTR_FLAG_OTHER_BSS, NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, /* keep last */ __NL80211_MNTR_FLAG_AFTER_LAST, @@ -2043,6 +2710,34 @@ enum nl80211_mntr_flags { }; /** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** * enum nl80211_meshconf_params - mesh configuration parameters * * Mesh configuration parameters. These can be changed while the mesh is @@ -2051,69 +2746,102 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) + * + * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the + * threshold for average signal strength of candidate station to establish + * a peer link. + * + * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) + * + * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. Default is 30 minutes. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2137,6 +2865,15 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_GATE_ANNOUNCEMENTS, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, NL80211_MESHCONF_FORWARDING, + NL80211_MESHCONF_RSSI_THRESHOLD, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, + NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2152,30 +2889,44 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ enum nl80211_mesh_setup_params { @@ -2185,6 +2936,9 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_IE, NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, + NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2194,7 +2948,7 @@ enum nl80211_mesh_setup_params { /** * enum nl80211_txq_attr - TX queue parameter attributes * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved - * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning * disabled * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form @@ -2207,7 +2961,7 @@ enum nl80211_mesh_setup_params { */ enum nl80211_txq_attr { __NL80211_TXQ_ATTR_INVALID, - NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_AC, NL80211_TXQ_ATTR_TXOP, NL80211_TXQ_ATTR_CWMIN, NL80211_TXQ_ATTR_CWMAX, @@ -2218,13 +2972,30 @@ enum nl80211_txq_attr { NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 }; -enum nl80211_txq_q { - NL80211_TXQ_Q_VO, - NL80211_TXQ_Q_VI, - NL80211_TXQ_Q_BE, - NL80211_TXQ_Q_BK +enum nl80211_ac { + NL80211_AC_VO, + NL80211_AC_VI, + NL80211_AC_BE, + NL80211_AC_BK, + NL80211_NUM_ACS }; +/* backward compat */ +#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC +#define NL80211_TXQ_Q_VO NL80211_AC_VO +#define NL80211_TXQ_Q_VI NL80211_AC_VI +#define NL80211_TXQ_Q_BE NL80211_AC_BE +#define NL80211_TXQ_Q_BK NL80211_AC_BK + +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, @@ -2233,6 +3004,51 @@ enum nl80211_channel_type { }; /** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, +}; + +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, +}; + +/** * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid @@ -2256,6 +3072,8 @@ enum nl80211_channel_type { * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -2272,6 +3090,7 @@ enum nl80211_bss { NL80211_BSS_STATUS, NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -2300,6 +3119,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -2311,6 +3131,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -2410,31 +3231,60 @@ enum nl80211_key_attributes { * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with * 1 = 500 kbps) but without the IE length restriction (at most * %NL80211_MAX_SUPP_RATES in a single array). - * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection + * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection * in an array of MCS numbers. + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ enum nl80211_tx_rate_attributes { __NL80211_TXRATE_INVALID, NL80211_TXRATE_LEGACY, - NL80211_TXRATE_MCS, + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, /* keep last */ __NL80211_TXRATE_AFTER_LAST, NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 }; +#define NL80211_TXRATE_MCS NL80211_TXRATE_HT +#define NL80211_VHT_NSS_MAX 8 + +/** + * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; +}; + +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) */ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, @@ -2452,6 +3302,17 @@ enum nl80211_ps_state { * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -2461,6 +3322,9 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_RSSI_HYST, NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, @@ -2473,10 +3337,14 @@ enum nl80211_attr_cqm { * configured threshold * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. + * (Note that deauth/disassoc will still follow if the AP is not + * available. This event might get used as roaming event, etc.) */ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, }; @@ -2493,49 +3361,65 @@ enum nl80211_tx_power_setting { }; /** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have * a bit for each byte in the pattern. The lowest-order bit corresponds * to the first byte of the pattern, but the bytes of the pattern are * in a little-endian-like format, i.e. the 9th byte of the pattern * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, + + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, }; /** - * struct nl80211_wowlan_pattern_support - pattern support information + * struct nl80211_pattern_support - packet pattern support information * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. */ -struct nl80211_wowlan_pattern_support { +struct nl80211_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + /** * enum nl80211_wowlan_triggers - WoWLAN trigger definitions * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes @@ -2549,12 +3433,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. + * carrying a &struct nl80211_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2565,8 +3454,36 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2579,6 +3496,14 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -2586,6 +3511,165 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that @@ -2621,6 +3705,10 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -2653,6 +3741,8 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -2692,6 +3782,23 @@ enum nl80211_plink_state { MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }; +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 #define NL80211_REPLAY_CTR_LEN 8 @@ -2804,10 +3911,72 @@ enum nl80211_ap_sme_features { * TX status to the socket error queue when requested with the * socket option. * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up + * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only + * here to reserve the value for API/ABI compatibility) + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. */ enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, }; /** @@ -2831,4 +4000,173 @@ enum nl80211_probe_resp_offload_support_attr { NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, }; +/** + * enum nl80211_connect_failed_reason - connection request failed reasons + * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be + * handled by the AP is reached. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. + */ +enum nl80211_connect_failed_reason { + NL80211_CONN_FAIL_MAX_CLIENTS, + NL80211_CONN_FAIL_BLOCKED_CLIENT, +}; + +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, +}; + +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @NL80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + +/** + * enum enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + +/** + * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers + * + * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. + * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. + * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. + * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. + * @NUM_NL80211_CRIT_PROTO: must be kept last. + */ +enum nl80211_crit_proto_id { + NL80211_CRIT_PROTO_UNSPEC, + NL80211_CRIT_PROTO_DHCP, + NL80211_CRIT_PROTO_EAPOL, + NL80211_CRIT_PROTO_APIPA, + /* add other protocols before this one */ + NUM_NL80211_CRIT_PROTO +}; + +/* maximum duration for critical protocol measures */ +#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ + +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, +}; + +/* + * If this flag is unset, the lower 24 bits are an OUI, if set + * a Linux nl80211 vendor ID is used (no such IDs are allocated + * yet, so that's not valid so far) + */ +#define NL80211_VENDOR_ID_IS_LINUX 0x80000000 + +/** + * struct nl80211_vendor_cmd_info - vendor command data + * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the + * value is a 24-bit OUI; if it is set then a separately allocated ID + * may be used, but no such IDs are allocated yet. New IDs should be + * added to this file when needed. + * @subcmd: sub-command ID for the command + */ +struct nl80211_vendor_cmd_info { + __u32 vendor_id; + __u32 subcmd; +}; + +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ |