iw: update to version 4.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46534

3 files changed, 94 insertions, 668 deletions

diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 03a3d38c66..afa55064e5 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,672 +1,100 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -25,10 +25,30 @@
+@@ -1761,6 +1761,9 @@ enum nl80211_commands {
+  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+  *      is operating in an indoor environment.
   *
-  */
- 
-+/*
-+ * This header file defines the userspace API to the wireless stack. Please
-+ * be careful not to break things - i.e. don't move anything around or so
-+ * unless you can demonstrate that it breaks neither API nor ABI.
-+ *
-+ * Additions to the API should be accompanied by actual implementations in
-+ * an upstream driver, so that example implementations exist in case there
-+ * are ever concerns about the precise semantics of the API or changes are
-+ * needed, and to ensure that code for dead (no longer implemented) API
-+ * can actually be identified and removed.
-+ * Nonetheless, semantics should also be documented carefully in this file.
-+ */
-+
- #include <linux/types.h>
- 
- #define NL80211_GENL_NAME "nl80211"
- 
-+#define NL80211_MULTICAST_GROUP_CONFIG		"config"
-+#define NL80211_MULTICAST_GROUP_SCAN		"scan"
-+#define NL80211_MULTICAST_GROUP_REG		"regulatory"
-+#define NL80211_MULTICAST_GROUP_MLME		"mlme"
-+#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
-+#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
-+
- /**
-  * DOC: Station handling
-  *
-@@ -173,8 +193,8 @@
-  *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
-  *
-  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
-- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
-- *	on an %NL80211_ATTR_IFINDEX is supported.
-+ *	either a dump request for all interfaces or a specific get with a
-+ *	single %NL80211_ATTR_IFINDEX is supported.
-  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
-  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
-  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
-@@ -227,7 +247,11 @@
-  *	the interface identified by %NL80211_ATTR_IFINDEX.
-  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
-  *	or, if no MAC address given, all stations, on the interface identified
-- *	by %NL80211_ATTR_IFINDEX.
-+ *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
-+ *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
-+ *	of disconnection indication should be sent to the station
-+ *	(Deauthentication or Disassociation frame and reason code for that
-+ *	frame).
-  *
-  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
-  * 	destination %NL80211_ATTR_MAC on the interface identified by
-@@ -248,7 +272,18 @@
-  *	%NL80211_ATTR_IFINDEX.
-  *
-  * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
-- * 	regulatory domain.
-+ *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
-+ *	has a private regulatory domain, it will be returned. Otherwise, the
-+ *	global regdomain will be returned.
-+ *	A device will have a private regulatory domain if it uses the
-+ *	regulatory_hint() API. Even when a private regdomain is used the channel
-+ *	information will still be mended according to further hints from
-+ *	the regulatory core to help with compliance. A dump version of this API
-+ *	is now available which will returns the global regdomain as well as
-+ *	all private regdomains of present wiphys (for those that have it).
-+ *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
-+ *	its private regdomain is the only valid one for it. The regulatory
-+ *	core is not used to help with compliance in this case.
-  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
-  *	after being queried by the kernel. CRDA replies by sending a regulatory
-  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
-@@ -302,7 +337,9 @@
-  *	if passed, define which channels should be scanned; if not
-  *	passed, all channels allowed for the current regulatory domain
-  *	are used.  Extra IEs can also be passed from the userspace by
-- *	using the %NL80211_ATTR_IE attribute.
-+ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
-+ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
-+ *	is supplied.
-  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
-  *	scheduled scan is not running. The caller may assume that as soon
-  *	as the call returns, it is safe to start a new scheduled scan again.
-@@ -639,7 +676,18 @@
-  * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
-  *	independently of the userspace SME, send this event indicating
-  *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
-- *	attributes determining channel width.
-+ *	attributes determining channel width.  This indication may also be
-+ *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA
-+ *	from the remote AP) is completed;
-+ *
-+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
-+ *	has been started on an interface, regardless of the initiator
-+ *	(ie. whether it was requested from a remote device or
-+ *	initiated on our own).  It indicates that
-+ *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
-+ *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
-+ *	decide to react to this indication by requesting other
-+ *	interfaces to change channel as well.
-  *
-  * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
-  *	its %NL80211_ATTR_WDEV identifier. It must have been created with
-@@ -738,6 +786,31 @@
-  *	before removing a station entry entirely, or before disassociating
-  *	or similar, cleanup will happen in the driver/device in this case.
-  *
-+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
-+ *	destination %NL80211_ATTR_MAC on the interface identified by
-+ *	%NL80211_ATTR_IFINDEX.
-+ *
-+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
-+ *	bandwidth of a channel must be given.
-+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
-+ *	network is determined by the network interface.
-+ *
-+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
-+ *	identified by the %NL80211_ATTR_MAC parameter. A target channel is
-+ *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
-+ *	channel width/type. The target operating class is given via
-+ *	%NL80211_ATTR_OPER_CLASS.
-+ *	The driver is responsible for continually initiating channel-switching
-+ *	operations and returning to the base channel for communication with the
-+ *	AP.
-+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
-+ *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
-+ *	when this command completes.
-+ *
-+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
-+ *	as an event to indicate changes for devices with wiphy-specific regdom
-+ *	management.
-+ *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-  */
-@@ -912,6 +985,18 @@ enum nl80211_commands {
- 	NL80211_CMD_ADD_TX_TS,
- 	NL80211_CMD_DEL_TX_TS,
- 
-+	NL80211_CMD_GET_MPP,
-+
-+	NL80211_CMD_JOIN_OCB,
-+	NL80211_CMD_LEAVE_OCB,
-+
-+	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
-+
-+	NL80211_CMD_TDLS_CHANNEL_SWITCH,
-+	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
-+
-+	NL80211_CMD_WIPHY_REG_CHANGE,
-+
- 	/* add new commands above here */
- 
- 	/* used to define NL80211_CMD_MAX below */
-@@ -1606,9 +1691,16 @@ enum nl80211_commands {
-  * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
-  *	As specified in the &enum nl80211_tdls_peer_capability.
-  *
-- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
-+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
-  *	creation then the new interface will be owned by the netlink socket
-- *	that created it and will be destroyed when the socket is closed
-+ *	that created it and will be destroyed when the socket is closed.
-+ *	If set during scheduled scan start then the new scan req will be
-+ *	owned by the netlink socket that created it and the scheduled scan will
-+ *	be stopped when the socket is closed.
-+ *	If set during configuration of regulatory indoor operation then the
-+ *	regulatory indoor configuration would be owned by the netlink socket
-+ *	that configured the indoor setting, and the indoor operation would be
-+ *	cleared when the socket is closed.
-  *
-  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
-  *	the TDLS link initiator.
-@@ -1638,6 +1730,40 @@ enum nl80211_commands {
-  * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
-  *	&enum nl80211_smps_mode.
-  *
-+ * @NL80211_ATTR_OPER_CLASS: operating class
-+ *
-+ * @NL80211_ATTR_MAC_MASK: MAC address mask
-+ *
-+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
-+ *	is self-managing its regulatory information and any regulatory domain
-+ *	obtained from it is coming from the device's wiphy and not the global
-+ *	cfg80211 regdomain.
-+ *
-+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
-+ *	array. The feature flags are identified by their bit index (see &enum
-+ *	nl80211_ext_feature_index). The bit index is ordered starting at the
-+ *	least-significant bit of the first byte in the array, ie. bit index 0
-+ *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
-+ *	of byte 3 (u8 array).
-+ *
-+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
-+ *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
-+ *	may return a survey entry without a channel indicating global radio
-+ *	statistics (only some values are valid and make sense.)
-+ *	For devices that don't return such an entry even then, the information
-+ *	should be contained in the result as the sum of the respective counters
-+ *	over all channels.
-+ *
-+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
-+ *	WoWLAN net-detect scan) is started, u32 in seconds.
-+
-+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
-+ *      is operating in an indoor environment.
-+ *
 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
 + *	transmit power to stay within regulatory limits. u32, dBi.
 + *
-+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-  */
-@@ -1973,7 +2099,7 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_TDLS_PEER_CAPABILITY,
+@@ -2130,6 +2133,8 @@ enum nl80211_attrs {
  
--	NL80211_ATTR_IFACE_SOCKET_OWNER,
-+	NL80211_ATTR_SOCKET_OWNER,
+ 	NL80211_ATTR_REG_INDOOR,
  
- 	NL80211_ATTR_CSA_C_OFFSETS_TX,
- 	NL80211_ATTR_MAX_CSA_COUNTERS,
-@@ -1990,15 +2116,35 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_SMPS_MODE,
- 
-+	NL80211_ATTR_OPER_CLASS,
-+
-+	NL80211_ATTR_MAC_MASK,
-+
-+	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
-+
-+	NL80211_ATTR_EXT_FEATURES,
-+
-+	NL80211_ATTR_SURVEY_RADIO_STATS,
-+
-+	NL80211_ATTR_NETNS_FD,
-+
-+	NL80211_ATTR_SCHED_SCAN_DELAY,
-+
-+	NL80211_ATTR_REG_INDOOR,
-+
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
-+	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
- 	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
- };
- 
- /* source-level API compatibility */
- #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
- #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
- 
- /*
-  * Allow user space programs to use #ifdef on new attributes by defining them
-@@ -2028,7 +2174,7 @@ enum nl80211_attrs {
- 
- #define NL80211_MAX_SUPP_RATES			32
- #define NL80211_MAX_SUPP_HT_RATES		77
--#define NL80211_MAX_SUPP_REG_RULES		32
-+#define NL80211_MAX_SUPP_REG_RULES		64
- #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
-@@ -2064,6 +2210,8 @@ enum nl80211_attrs {
-  *	and therefore can't be created in the normal ways, use the
-  *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
-  *	commands to create and destroy one
-+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
-+ *	This mode corresponds to the MIB variable dot11OCBActivated=true
-  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
-  * @NUM_NL80211_IFTYPES: number of defined interface types
-  *
-@@ -2083,6 +2231,7 @@ enum nl80211_iftype {
- 	NL80211_IFTYPE_P2P_CLIENT,
- 	NL80211_IFTYPE_P2P_GO,
- 	NL80211_IFTYPE_P2P_DEVICE,
-+	NL80211_IFTYPE_OCB,
- 
- 	/* keep last */
- 	NUM_NL80211_IFTYPES,
-@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update {
-  * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
-  * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
-  * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
-- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
-+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
-+ *	same as 160 for purposes of the bitrates
-  * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
-+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
-+ *	a legacy rate and will be reported as the actual bitrate, i.e.
-+ *	half the base (20 MHz) rate
-+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
-+ *	a legacy rate and will be reported as the actual bitrate, i.e.
-+ *	a quarter of the base (20 MHz) rate
-  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
-  */
- enum nl80211_rate_info {
-@@ -2181,6 +2337,8 @@ enum nl80211_rate_info {
- 	NL80211_RATE_INFO_80_MHZ_WIDTH,
- 	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
- 	NL80211_RATE_INFO_160_MHZ_WIDTH,
-+	NL80211_RATE_INFO_10_MHZ_WIDTH,
-+	NL80211_RATE_INFO_5_MHZ_WIDTH,
- 
- 	/* keep last */
- 	__NL80211_RATE_INFO_AFTER_LAST,
-@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param {
-  *
-  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
-  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
-- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
-- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
-- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
-- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
-+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
-+ *	(u32, from this station)
-+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
-+ *	(u32, to this station)
-+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
-+ *	(u64, from this station)
-+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
-+ *	(u64, to this station)
-  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
-  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
-  * 	containing info as possible, see &enum nl80211_rate_info
-- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
-- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
-- *	station)
-- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
-- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
-+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
-+ *	(u32, from this station)
-+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
-+ *	(u32, to this station)
-+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
-+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
-+ *	(u32, to this station)
-  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
-  * @NL80211_STA_INFO_LLID: the station's mesh LLID
-  * @NL80211_STA_INFO_PLID: the station's mesh PLID
-@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param {
-  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
-  * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
-  *	802.11 header (u32, kbps)
-+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
-+ *	(u64)
-+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
-+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
-+ *	for beacons only (u8, dBm)
-+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
-+ *	This is a nested attribute where each the inner attribute number is the
-+ *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
-+ *	each one of those is again nested with &enum nl80211_tid_stats
-+ *	attributes carrying the actual values.
-  * @__NL80211_STA_INFO_AFTER_LAST: internal
-  * @NL80211_STA_INFO_MAX: highest possible station info attribute
+@@ -2620,16 +2625,17 @@ enum nl80211_band_attr {
+  *	an indoor surroundings, i.e., it is connected to AC power (and not
+  *	through portable DC inverters) or is under the control of a master
+  *	that is acting as an AP and is connected to AC power.
+- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
++ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
+  *	channel if it's connected concurrently to a BSS on the same channel on
+  *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+- *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+- *	channel that has the GO_CONCURRENT attribute set can be done when there
+- *	is a clear assessment that the device is operating under the guidance of
+- *	an authorized master, i.e., setting up a GO while the device is also
+- *	connected to an AP with DFS and radar detection on the UNII band (it is
+- *	up to user-space, i.e., wpa_supplicant to perform the required
+- *	verifications)
++ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
++ *	off-channel on a channel that has the IR_CONCURRENT attribute set can be
++ *	done when there is a clear assessment that the device is operating under
++ *	the guidance of an authorized master, i.e., setting up a GO or TDLS
++ *	off-channel while the device is also connected to an AP with DFS and
++ *	radar detection on the UNII band (it is up to user-space, i.e.,
++ *	wpa_supplicant to perform the required verifications). Using this
++ *	attribute for IR is disallowed for master interfaces (IBSS, AP).
+  * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
+  *	on this channel in current regulatory domain.
+  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+@@ -2641,7 +2647,7 @@ enum nl80211_band_attr {
+  * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+  * for more information on the FCC description of the relaxations allowed
+  * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
++ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
   */
-@@ -2292,6 +2466,10 @@ enum nl80211_sta_info {
- 	NL80211_STA_INFO_CHAIN_SIGNAL,
- 	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
- 	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
-+	NL80211_STA_INFO_RX_DROP_MISC,
-+	NL80211_STA_INFO_BEACON_RX,
-+	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
-+	NL80211_STA_INFO_TID_STATS,
- 
- 	/* keep last */
- 	__NL80211_STA_INFO_AFTER_LAST,
-@@ -2299,6 +2477,31 @@ enum nl80211_sta_info {
- };
+ enum nl80211_frequency_attr {
+ 	__NL80211_FREQUENCY_ATTR_INVALID,
+@@ -2659,7 +2665,7 @@ enum nl80211_frequency_attr {
+ 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
+ 	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ 	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+-	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
++	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
+ 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
+ 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
+ 
+@@ -2672,6 +2678,8 @@ enum nl80211_frequency_attr {
+ #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
+ #define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
+ #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
++#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
++					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  
  /**
-+ * enum nl80211_tid_stats - per TID statistics attributes
-+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
-+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
-+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
-+ *	attempted to transmit; u64)
-+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
-+ *	transmitted MSDUs (not counting the first attempt; u64)
-+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
-+ *	MSDUs (u64)
-+ * @NUM_NL80211_TID_STATS: number of attributes here
-+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
-+ */
-+enum nl80211_tid_stats {
-+	__NL80211_TID_STATS_INVALID,
-+	NL80211_TID_STATS_RX_MSDU,
-+	NL80211_TID_STATS_TX_MSDU,
-+	NL80211_TID_STATS_TX_MSDU_RETRIES,
-+	NL80211_TID_STATS_TX_MSDU_FAILED,
-+
-+	/* keep last */
-+	NUM_NL80211_TID_STATS,
-+	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
-+};
-+
-+/**
-  * enum nl80211_mpath_flags - nl80211 mesh path flags
-  *
-  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
-@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr {
+  * enum nl80211_bitrate_attr - bitrate attributes
+@@ -2830,7 +2838,7 @@ enum nl80211_sched_scan_match_attr {
   * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
   *	base on contiguous rules and wider channels will be allowed to cross
   *	multiple contiguous/overlapping frequency ranges.
-+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
-+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
-+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
-+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
-+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
-  */
- enum nl80211_reg_rule_flags {
- 	NL80211_RRF_NO_OFDM		= 1<<0,
-@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags {
+- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
++ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+  * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
+  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
+  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
+@@ -2847,7 +2855,7 @@ enum nl80211_reg_rule_flags {
  	NL80211_RRF_NO_IR		= 1<<7,
  	__NL80211_RRF_NO_IBSS		= 1<<8,
  	NL80211_RRF_AUTO_BW		= 1<<11,
-+	NL80211_RRF_GO_CONCURRENT	= 1<<12,
-+	NL80211_RRF_NO_HT40MINUS	= 1<<13,
-+	NL80211_RRF_NO_HT40PLUS		= 1<<14,
-+	NL80211_RRF_NO_80MHZ		= 1<<15,
-+	NL80211_RRF_NO_160MHZ		= 1<<16,
- };
- 
- #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR
+-	NL80211_RRF_GO_CONCURRENT	= 1<<12,
++	NL80211_RRF_IR_CONCURRENT	= 1<<12,
+ 	NL80211_RRF_NO_HT40MINUS	= 1<<13,
+ 	NL80211_RRF_NO_HT40PLUS		= 1<<14,
+ 	NL80211_RRF_NO_80MHZ		= 1<<15,
+@@ -2859,6 +2867,7 @@ enum nl80211_reg_rule_flags {
  #define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
-+#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
-+					 NL80211_RRF_NO_HT40PLUS)
+ #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
+ 					 NL80211_RRF_NO_HT40PLUS)
++#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
  
  /* For backport compatibility with older userspace */
  #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
-@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type {
-  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
-  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
-  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
-- *	spent on this channel
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
-+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
-+ *	was turned on (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
-  *	channel was sensed busy (either due to activity or energy detect)
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
-+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
-  *	channel was sensed busy
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
-- *	receiving data
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
-- *	transmitting data
-+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
-+ *	receiving data (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
-+ *	transmitting data (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
-+ *	(on this channel or globally)
-  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
-  *	currently defined
-  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -2719,17 +2936,25 @@ enum nl80211_survey_info {
- 	NL80211_SURVEY_INFO_FREQUENCY,
- 	NL80211_SURVEY_INFO_NOISE,
- 	NL80211_SURVEY_INFO_IN_USE,
--	NL80211_SURVEY_INFO_CHANNEL_TIME,
--	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
--	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
--	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
--	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-+	NL80211_SURVEY_INFO_TIME,
-+	NL80211_SURVEY_INFO_TIME_BUSY,
-+	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
-+	NL80211_SURVEY_INFO_TIME_RX,
-+	NL80211_SURVEY_INFO_TIME_TX,
-+	NL80211_SURVEY_INFO_TIME_SCAN,
- 
- 	/* keep last */
- 	__NL80211_SURVEY_INFO_AFTER_LAST,
- 	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
- };
- 
-+/* keep old names for compatibility */
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
-+
- /**
-  * enum nl80211_mntr_flags - monitor configuration flags
-  *
-@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode {
-  *
-  * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
-  *	established peering with for longer than this time (in seconds), then
-- *	remove it from the STA's list of peers.  Default is 30 minutes.
-+ *	remove it from the STA's list of peers. You may set this to 0 to disable
-+ *	the removal of the STA. Default is 30 minutes.
-  *
-  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
-  */
-@@ -3166,6 +3392,9 @@ enum nl80211_bss {
- /**
-  * enum nl80211_bss_status - BSS "status"
-  * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
-+ *	Note that this is no longer used since cfg80211 no longer
-+ *	keeps track of whether or not authentication was done with
-+ *	a given BSS.
-  * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
-  * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
-  *
-@@ -3379,6 +3608,8 @@ enum nl80211_ps_state {
-  *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
-  *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
-  *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
-+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
-+ *	loss event
-  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
-  * @NL80211_ATTR_CQM_MAX: highest key attribute
-  */
-@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm {
- 	NL80211_ATTR_CQM_TXE_RATE,
- 	NL80211_ATTR_CQM_TXE_PKTS,
- 	NL80211_ATTR_CQM_TXE_INTVL,
-+	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
- 
- 	/* keep last */
- 	__NL80211_ATTR_CQM_AFTER_LAST,
-@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm {
-  *      configured threshold
-  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
-  *      configured threshold
-- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
-- *	(Note that deauth/disassoc will still follow if the AP is not
-- *	available. This event might get used as roaming event, etc.)
-+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
-  */
- enum nl80211_cqm_rssi_threshold_event {
- 	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support {
-  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
-  *	the chip into a special state -- works best with chips that have
-  *	support for low-power operation already (flag)
-+ *	Note that this mode is incompatible with all of the others, if
-+ *	any others are even supported by the device.
-  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
-  *	is detected is implementation-specific (flag)
-  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
-@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support {
-  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
-  *	the TCP connection ran out of tokens to use for data to send to the
-  *	service
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
-+ *	is detected.  This is a nested attribute that contains the
-+ *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
-+ *	specifies how the scan is performed (e.g. the interval, the
-+ *	channels to scan and the initial delay) as well as the scan
-+ *	results that will trigger a wake (i.e. the matchsets).  This
-+ *	attribute is also sent in a response to
-+ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
-+ *	supported by the driver (u32).
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
-+ *	containing an array with information about what triggered the
-+ *	wake up.  If no elements are present in the array, it means
-+ *	that the information is not available.  If more than one
-+ *	element is present, it means that more than one match
-+ *	occurred.
-+ *	Each element in the array is a nested attribute that contains
-+ *	one optional %NL80211_ATTR_SSID attribute and one optional
-+ *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
-+ *	these attributes must be present.  If
-+ *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
-+ *	frequency, it means that the match occurred in more than one
-+ *	channel.
-  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
-  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
-  *
-@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers {
- 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
- 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
- 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
-+	NL80211_WOWLAN_TRIG_NET_DETECT,
-+	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
- 
- 	/* keep last */
- 	NUM_NL80211_WOWLAN_TRIG,
-@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features {
-  *	multiplexing powersave, ie. can turn off all but one chain
-  *	and then wake the rest up as required after, for example,
-  *	rts/cts handshake.
-+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
-+ *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
-+ *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
-+ *	needs to be able to handle Block-Ack agreements and other things.
-+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
-+ *	the vif's MAC address upon creation.
-+ *	See 'macaddr' field in the vif_params (cfg80211.h).
-+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
-+ *	operating as a TDLS peer.
-+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
-+ *	random MAC address during scan (if the device is unassociated); the
-+ *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
-+ *	address mask/value will be used.
-+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
-+ *	using a random MAC address for every scan iteration during scheduled
-+ *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
-+ *	be set for scheduled scan and the MAC address mask/value will be used.
-+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
-+ *	random MAC address for every scan iteration during "net detect", i.e.
-+ *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
-+ *	be set for scheduled scan and the MAC address mask/value will be used.
-  */
- enum nl80211_feature_flags {
- 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags {
- 	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
- 	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
- 	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
-+	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
-+	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
-+	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
-+	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
-+	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
-+	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1 << 31,
-+};
-+
-+/**
-+ * enum nl80211_ext_feature_index - bit index of extended features.
-+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
-+ *
-+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
-+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
-+ */
-+enum nl80211_ext_feature_index {
-+	NL80211_EXT_FEATURE_VHT_IBSS,
-+
-+	/* add new features before the definition below */
-+	NUM_NL80211_EXT_FEATURES,
-+	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
- };
- 
- /**
-@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason {
-  *	dangerous because will destroy stations performance as a lot of frames
-  *	will be lost while scanning off-channel, therefore it must be used only
-  *	when really needed
-+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
-+ *	for scheduled scan: a different one for every scan iteration). When the
-+ *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
-+ *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
-+ *	the masked bits will be preserved from the MAC address and the remainder
-+ *	randomised. If the attributes are not given full randomisation (46 bits,
-+ *	locally administered 1, multicast 0) is assumed.
-+ *	This flag must not be requested when the feature isn't supported, check
-+ *	the nl80211 feature flags for the device.
-  */
- enum nl80211_scan_flags {
- 	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
- 	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
- 	NL80211_SCAN_FLAG_AP				= 1<<2,
-+	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
- };
- 
- /**
diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch
index cf6a3fa221..8de3df2e5a 100644
--- a/package/network/utils/iw/patches/120-antenna_gain.patch
+++ b/package/network/utils/iw/patches/120-antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/phy.c
 +++ b/phy.c
-@@ -495,3 +495,31 @@ COMMAND(set, antenna, "<bitmap> | all | 
+@@ -532,3 +532,31 @@ COMMAND(set, antenna, "<bitmap> | all |
  	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
  	"Set a bitmap of allowed antennas to use for TX and RX.\n"
  	"The driver may reject antenna configurations it cannot support.");
diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch
index 882cf89f8d..0204f0b032 100644
--- a/package/network/utils/iw/patches/200-reduce_size.patch
+++ b/package/network/utils/iw/patches/200-reduce_size.patch
@@ -1,19 +1,17 @@
 --- a/Makefile
 +++ b/Makefile
-@@ -15,8 +15,8 @@ CFLAGS += -Wall -Wundef -Wstrict-prototy
- OBJS = iw.o genl.o event.o info.o phy.o \
- 	interface.o ibss.o station.o survey.o util.o \
- 	mesh.o mpath.o scan.o reg.o version.o \
--	reason.o status.o connect.o link.o offch.o ps.o cqm.o \
--	bitrate.o wowlan.o coalesce.o roc.o p2p.o
-+	reason.o status.o connect.o link.o ps.o \
-+	bitrate.o
+@@ -16,7 +16,7 @@ OBJS = iw.o genl.o event.o info.o phy.o
+ 	interface.o ibss.o station.o survey.o util.o ocb.o \
+ 	mesh.o mpath.o mpp.o scan.o reg.o version.o \
+ 	reason.o status.o connect.o link.o offch.o ps.o cqm.o \
+-	bitrate.o wowlan.o coalesce.o roc.o p2p.o vendor.o
++	bitrate.o vendor.o
  OBJS += sections.o
  
  OBJS-$(HWSIM) += hwsim.o
 --- a/info.c
 +++ b/info.c
-@@ -207,6 +207,7 @@ next:
+@@ -219,6 +219,7 @@ next:
  				}
  			}
  
@@ -21,7 +19,7 @@
  			if (tb_band[NL80211_BAND_ATTR_RATES]) {
  			printf("\t\tBitrates (non-HT):\n");
  			nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
-@@ -223,6 +224,7 @@ next:
+@@ -235,6 +236,7 @@ next:
  				printf("\n");
  			}
  			}
@@ -29,7 +27,7 @@
  		}
  	}
  
-@@ -273,6 +275,7 @@ next:
+@@ -291,6 +293,7 @@ next:
  		printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
  	}
  
@@ -37,7 +35,7 @@
  	if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
  		int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
  		int i;
-@@ -284,6 +287,7 @@ next:
+@@ -302,6 +305,7 @@ next:
  					cipher_name(ciphers[i]));
  		}
  	}
@@ -45,7 +43,7 @@
  
  	if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
  	    tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
-@@ -303,11 +307,13 @@ next:
+@@ -321,11 +325,13 @@ next:
  			printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
  	}
  
@@ -59,7 +57,7 @@
  
  	if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
  		struct nlattr *nl_combi;
-@@ -404,6 +410,7 @@ broken_combination:
+@@ -422,6 +428,7 @@ broken_combination:
  			printf("\tinterface combinations are not supported\n");
  	}
  
@@ -67,7 +65,7 @@
  	if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
  		printf("\tSupported commands:\n");
  		nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
-@@ -496,6 +503,7 @@ broken_combination:
+@@ -518,6 +525,7 @@ broken_combination:
  				printf("\t\t * wake up on TCP connection\n");
  		}
  	}
@@ -75,7 +73,7 @@
  
  	if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
  		printf("\tDevice supports roaming.\n");
-@@ -532,6 +540,7 @@ broken_combination:
+@@ -554,6 +562,7 @@ broken_combination:
  		}
  	}
  
@@ -83,15 +81,15 @@
  	if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
  		unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
  
-@@ -584,6 +593,7 @@ broken_combination:
- 		if (features & NL80211_FEATURE_DYNAMIC_SMPS)
- 			printf("\tDevice supports dynamic SMPS\n");
+@@ -612,6 +621,7 @@ broken_combination:
+ 		if (features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH)
+ 			printf("\tDevice supports TDLS channel switching\n");
  	}
 +#endif
  
- 	if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
- 		printf("\tDevice supports T-DLS.\n");
-@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+ 	if (tb_msg[NL80211_ATTR_EXT_FEATURES]) {
+ 		struct nlattr *tb = tb_msg[NL80211_ATTR_EXT_FEATURES];
+@@ -669,6 +679,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
  	 "List all wireless devices and their capabilities.");
  TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
  
@@ -99,7 +97,7 @@
  static int handle_commands(struct nl80211_state *state,
  			   struct nl_cb *cb, struct nl_msg *msg,
  			   int argc, char **argv, enum id_input id)
-@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021
+@@ -681,6 +692,7 @@ static int handle_commands(struct nl8021
  }
  TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
  	 "list all known commands and their decimal & hex value");