diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2020-09-01 14:23:44 +0200 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2020-09-06 20:30:51 +0200 |
commit | b71433f42dc6b011599c4925a5663af77224761f (patch) | |
tree | 7708911dff333c8c324d5d42b8dc32602e9869ff /package/network/utils/iw/patches/001-nl80211_h_sync.patch | |
parent | 103225b4127dbcc7747b4fb8d4f4d7e2c89ed67a (diff) | |
download | upstream-b71433f42dc6b011599c4925a5663af77224761f.tar.gz upstream-b71433f42dc6b011599c4925a5663af77224761f.tar.bz2 upstream-b71433f42dc6b011599c4925a5663af77224761f.zip |
iw: Update to version 5.8
The ipk sizes for mips_24Kc change like this:
old:
iw_5.4-1_mips_24kc.ipk 35.767
iw-full_5.4-1_mips_24kc.ipk 68.423
new:
iw_5.8-1_mips_24kc.ipk 36.883
iw-full_5.8-1_mips_24kc.ipk 71.992
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'package/network/utils/iw/patches/001-nl80211_h_sync.patch')
-rw-r--r-- | package/network/utils/iw/patches/001-nl80211_h_sync.patch | 687 |
1 files changed, 6 insertions, 681 deletions
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index d935a1dc3e..4b462d3f20 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,696 +1,21 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -11,7 +11,7 @@ - * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> - * Copyright 2008 Colin McCabe <colin@cozybit.com> - * Copyright 2015-2017 Intel Deutschland GmbH -- * Copyright (C) 2018-2019 Intel Corporation -+ * Copyright (C) 2018-2020 Intel Corporation +@@ -2515,6 +2515,9 @@ enum nl80211_commands { + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -249,6 +249,45 @@ - */ - - /** -+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs -+ * -+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they -+ * support offloading VLAN functionality in a manner where the driver exposes a -+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs -+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet -+ * case. Frames received from stations that are not assigned to any VLAN are -+ * delivered on the main netdev and frames to such stations can be sent through -+ * that main netdev. -+ * -+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and -+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using -+ * %NL80211_ATTR_VLAN_ID. -+ */ -+ -+/** -+ * DOC: TID configuration -+ * -+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG -+ * attribute given in wiphy capabilities. -+ * -+ * The necessary configuration parameters are mentioned in -+ * &enum nl80211_tid_config_attr and it will be passed to the -+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. -+ * -+ * If the configuration needs to be applied for specific peer then the MAC -+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the -+ * configuration will be applied for all the connected peers in the vif except -+ * any peers that have peer specific configuration for the TID by default; if -+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values -+ * will be overwritten. -+ * -+ * All this configuration is valid only for STA's current connection -+ * i.e. the configuration will be reset to default when the STA connects back -+ * after disconnection/roaming, and this configuration will be cleared when -+ * the interface goes down. -+ */ -+ -+/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors -@@ -257,13 +296,14 @@ - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, -- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the -- * attributes determining the channel width; this is used for setting -- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, -- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, -- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. -- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL -- * instead, the support here is for backward compatibility only. -+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the -+ * channel width; this is used for setting monitor mode channel), -+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, -+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or -+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, -+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward -+ * compatibility only. - * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request - * or rename notification. Has attributes %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. -@@ -312,7 +352,8 @@ - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, - * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. - * The channel to use can be set on the interface or be given using the -- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. -+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the -+ * attributes determining channel width. - * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP - * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface - * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP -@@ -497,11 +538,12 @@ - * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and - * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify - * the SSID (mainly for association, but is included in authentication -- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used -- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE -- * is used to specify the authentication type. %NL80211_ATTR_IE is used to -- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) -- * to be added to the frame. -+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the -+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the -+ * authentication type. %NL80211_ATTR_IE is used to define IEs -+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added -+ * to the frame. - * When used as an event, this reports reception of an Authentication - * frame in station and IBSS modes when the local MLME processed the - * frame, i.e., it was for the local STA and was received in correct -@@ -556,8 +598,9 @@ - * requests to connect to a specified network but without separating - * auth and assoc steps. For this, you need to specify the SSID in a - * %NL80211_ATTR_SSID attribute, and can optionally specify the association -- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, -- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, -+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, -+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, - * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and -@@ -571,6 +614,14 @@ - * set of BSSID,frequency parameters is used (i.e., either the enforcing - * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict - * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). -+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if -+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is -+ * included, these IEs through %NL80211_ATTR_IE are specified by the user -+ * space based on the best possible BSS selected. Thus, if the driver ends -+ * up selecting a different BSS, it can modify these IEs accordingly (e.g. -+ * userspace asks the driver to perform PMKSA caching with BSS1 and the -+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE -+ * has to get updated with the apt PMKID). - * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within - * the ESS in case the device is already associated and an association with - * a different BSS is desired. -@@ -640,6 +691,10 @@ - * four bytes for vendor frames including the OUI. The registration - * cannot be dropped, but is removed automatically when the netlink - * socket is closed. Multiple registrations can be made. -+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if -+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which -+ * case the registration can also be modified to include/exclude the -+ * flag, rather than requiring unregistration to change it. - * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for - * backward compatibility - * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This -@@ -739,7 +794,7 @@ - * various triggers. These triggers can be configured through this - * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For - * more background information, see -- * http://wireless.kernel.org/en/users/Documentation/WoWLAN. -+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. - * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification - * from the driver reporting the wakeup reason. In this case, the - * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason -@@ -1101,6 +1156,20 @@ - * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame - * content. The frame is ethernet data. - * -+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration -+ * is passed using %NL80211_ATTR_TID_CONFIG attribute. -+ * -+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon -+ * frame. This event is used to indicate that a received Beacon frame was -+ * dropped because it did not include a valid MME MIC while beacon -+ * protection was enabled (BIGTK configured in station mode). -+ * -+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control -+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. -+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME -+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included -+ * if the recipient acknowledged the frame. -+ * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -@@ -1325,6 +1394,12 @@ enum nl80211_commands { - - NL80211_CMD_PROBE_MESH_LINK, - -+ NL80211_CMD_SET_TID_CONFIG, -+ -+ NL80211_CMD_UNPROT_BEACON, -+ -+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -1370,7 +1445,8 @@ enum nl80211_commands { - * of &enum nl80211_chan_width, describing the channel width. See the - * documentation of the enum for more information. - * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the -- * channel, used for anything but 20 MHz bandwidth -+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the -+ * operating channel center frequency. - * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the - * channel, used only for 80+80 MHz bandwidth - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ -@@ -1580,7 +1656,8 @@ enum nl80211_commands { - * flag is included, then control port frames are sent over NL80211 instead - * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is - * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER -- * flag. -+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth -+ * frames are not forwared over the control port. - * - * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. - * We recommend using nested, driver-specific attributes within this. -@@ -2373,6 +2450,64 @@ enum nl80211_commands { - * the allowed channel bandwidth configurations. (u8 attribute) - * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. - * -+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key -+ * (u16). -+ * -+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. -+ * -+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry -+ * using attributes from &enum nl80211_iftype_akm_attributes. This -+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating -+ * supported AKM suites capability per interface. AKMs advertised in -+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not -+ * advertised for a specific interface type. -+ * -+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a -+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes; -+ * on output (in wiphy attributes) it contains only the feature sub- -+ * attributes. -+ * -+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control -+ * port in order to forward/receive them as ordinary data frames. -+ * -+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, -+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). -+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA. -+ * Drivers that trigger roaming need to know the lifetime of the -+ * configured PMKSA for triggering the full vs. PMKSA caching based -+ * authentication. This timeout helps authentication methods like SAE, -+ * where PMK gets updated only by going through a full (new SAE) -+ * authentication instead of getting updated during an association for EAP -+ * authentication. No new full authentication within the PMK expiry shall -+ * result in a disassociation at the end of the lifetime. -+ * -+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in -+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME -+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional -+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the -+ * driver to trigger a full authentication roam (without PMKSA caching) -+ * after the reauthentication threshold time, but before the PMK lifetime -+ * has expired. -+ * -+ * Authentication methods like SAE need to be able to generate a new PMKSA -+ * entry without having to force a disconnection after the PMK timeout. If -+ * no roaming occurs between the reauth threshold and PMK expiration, -+ * disassociation is still forced. -+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the -+ * %NL80211_CMD_REGISTER_FRAME command, see the description there. -+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated -+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with -+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. -+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the -+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. -+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies -+ * -+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from -+ * association request when used with NL80211_CMD_NEW_STATION). -+ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2835,6 +2970,28 @@ enum nl80211_attrs { - NL80211_ATTR_WIPHY_EDMG_CHANNELS, - NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, +@@ -2997,6 +3000,8 @@ enum nl80211_attrs { + + NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ NL80211_ATTR_VLAN_ID, -+ -+ NL80211_ATTR_HE_BSS_COLOR, -+ -+ NL80211_ATTR_IFTYPE_AKM_SUITES, -+ -+ NL80211_ATTR_TID_CONFIG, -+ -+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, -+ -+ NL80211_ATTR_PMK_LIFETIME, -+ NL80211_ATTR_PMK_REAUTH_THRESHOLD, -+ -+ NL80211_ATTR_RECEIVE_MULTICAST, -+ NL80211_ATTR_WIPHY_FREQ_OFFSET, -+ NL80211_ATTR_CENTER_FREQ1_OFFSET, -+ NL80211_ATTR_SCAN_FREQ_KHZ, -+ -+ NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info { - * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined -+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), -+ * given for all 6 GHz band channels - * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use - */ - enum nl80211_band_iftype_attr { -@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr { - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, -+ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, - - /* keep last */ - __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, -@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule { - * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. - * This is a nested attribute that contains the wmm limitation per AC. - * (see &enum nl80211_wmm_rule) -+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel -+ * in current regulatory domain. -+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use -@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr { - NL80211_FREQUENCY_ATTR_NO_20MHZ, - NL80211_FREQUENCY_ATTR_NO_10MHZ, - NL80211_FREQUENCY_ATTR_WMM, -+ NL80211_FREQUENCY_ATTR_NO_HE, -+ NL80211_FREQUENCY_ATTR_OFFSET, - - /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr { - * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation - * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed - * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed -+ * @NL80211_RRF_NO_HE: HE operation not allowed - */ - enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, -@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, -+ NL80211_RRF_NO_HE = 1<<17, - }; - - #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width { - * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. - * Contains a nested array of signal strength attributes (u8, dBm), - * using the nesting index as the antenna number. -+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -@@ -4375,6 +4543,7 @@ enum nl80211_bss { - NL80211_BSS_PARENT_TSF, - NL80211_BSS_PARENT_BSSID, - NL80211_BSS_CHAIN_SIGNAL, -+ NL80211_BSS_FREQUENCY_OFFSET, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, -@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types { - * See &enum nl80211_key_default_types. - * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. - * Defaults to @NL80211_KEY_RX_TX. -+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key - * - * @__NL80211_KEY_AFTER_LAST: internal - * @NL80211_KEY_MAX: highest key attribute -@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes { - NL80211_KEY_TYPE, - NL80211_KEY_DEFAULT_TYPES, - NL80211_KEY_MODE, -+ NL80211_KEY_DEFAULT_BEACON, - - /* keep last */ - __NL80211_KEY_AFTER_LAST, -@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting { - }; - - /** -+ * enum nl80211_tid_config - TID config state -+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID -+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID -+ */ -+enum nl80211_tid_config { -+ NL80211_TID_CONFIG_ENABLE, -+ NL80211_TID_CONFIG_DISABLE, -+}; -+ -+/* enum nl80211_tx_rate_setting - TX rate configuration type -+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate -+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter -+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter -+ */ -+enum nl80211_tx_rate_setting { -+ NL80211_TX_RATE_AUTOMATIC, -+ NL80211_TX_RATE_LIMITED, -+ NL80211_TX_RATE_FIXED, -+}; -+ -+/* enum nl80211_tid_config_attr - TID specific configuration. -+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values -+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported -+ * for per-vif configuration; doesn't list the ones that are generic -+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). -+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but -+ * per peer instead. -+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates -+ * that the new configuration overrides all previous peer -+ * configurations, otherwise previous peer specific configurations -+ * should be left untouched. -+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) -+ * Its type is u16. -+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. -+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. -+ * Its type is u8. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs -+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using -+ * the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful -+ * to notfiy the driver that what type of txrate should be used -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using -+ * the values form &nl80211_tx_rate_setting. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied -+ * with the parameters passed through %NL80211_ATTR_TX_RATES. -+ * configuration is applied to the data frame for the tid to that connected -+ * station. -+ */ -+enum nl80211_tid_config_attr { -+ __NL80211_TID_CONFIG_ATTR_INVALID, -+ NL80211_TID_CONFIG_ATTR_PAD, -+ NL80211_TID_CONFIG_ATTR_VIF_SUPP, -+ NL80211_TID_CONFIG_ATTR_PEER_SUPP, -+ NL80211_TID_CONFIG_ATTR_OVERRIDE, -+ NL80211_TID_CONFIG_ATTR_TIDS, -+ NL80211_TID_CONFIG_ATTR_NOACK, -+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT, -+ NL80211_TID_CONFIG_ATTR_RETRY_LONG, -+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, -+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, -+ NL80211_TID_CONFIG_ATTR_TX_RATE, -+ -+ /* keep last */ -+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST, -+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 -+}; -+ -+/** - * enum nl80211_packet_pattern_attr - packet pattern attribute - * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has -@@ -5144,6 +5401,8 @@ enum plink_actions { - - #define NL80211_KCK_LEN 16 - #define NL80211_KEK_LEN 16 -+#define NL80211_KCK_EXT_LEN 24 -+#define NL80211_KEK_EXT_LEN 32 - #define NL80211_REPLAY_CTR_LEN 8 - - /** -@@ -5152,6 +5411,7 @@ enum plink_actions { - * @NL80211_REKEY_DATA_KEK: key encryption key (binary) - * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) - * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) -+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) - * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) - * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) - */ -@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data { - NL80211_REKEY_DATA_KEK, - NL80211_REKEY_DATA_KCK, - NL80211_REKEY_DATA_REPLAY_CTR, -+ NL80211_REKEY_DATA_AKM, - - /* keep last */ - NUM_NL80211_REKEY_DATA, -@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags { - * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in - * station mode (SAE password is passed as part of the connect command). - * -+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev -+ * with VLAN tagged frames and separate VLAN-specific netdevs added using -+ * vconfig similarly to the Ethernet case. -+ * -+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) -+ * feature, which prevents bufferbloat by using the expected transmission -+ * time to limit the amount of data buffered in the hardware. -+ * -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection -+ * and can receive key configuration for BIGTK using key indexes 6 and 7. -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon -+ * protection as a client only and cannot transmit protected beacons. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the -+ * forwarding of preauth frames over the control port. They are then -+ * handled as ordinary data frames. -+ * -+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames -+ * -+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations -+ * in IBSS mode, essentially by dropping their state. -+ * -+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations -+ * are possible for multicast frames and those will be reported properly. -+ * -+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and -+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to -+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be -+ * included in the scan request. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver -+ * can report tx status for control port over nl80211 tx operations. -+ * - * @NUM_NL80211_EXT_FEATURES: number of extended features. - * @MAX_NL80211_EXT_FEATURES: highest extended feature index. - */ -@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index { - NL80211_EXT_FEATURE_EXT_KEY_ID, - NL80211_EXT_FEATURE_STA_TX_PWR, - NL80211_EXT_FEATURE_SAE_OFFLOAD, -+ NL80211_EXT_FEATURE_VLAN_OFFLOAD, -+ NL80211_EXT_FEATURE_AQL, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION, -+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, -+ NL80211_EXT_FEATURE_PROTECTED_TWT, -+ NL80211_EXT_FEATURE_DEL_IBSS_STA, -+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, -+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, -+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, - - /* add new features before the definition below */ - NUM_NL80211_EXT_FEATURES, -@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason { - * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to - * only have supported rates and no additional capabilities (unless - * added by userspace explicitly.) -+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with -+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means -+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - */ - enum nl80211_scan_flags { - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, -@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags { - NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, - NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, - NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, -+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, - }; - - /** -@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats { - * @NL80211_PREAMBLE_HT: HT preamble - * @NL80211_PREAMBLE_VHT: VHT preamble - * @NL80211_PREAMBLE_DMG: DMG preamble -+ * @NL80211_PREAMBLE_HE: HE preamble - */ - enum nl80211_preamble { - NL80211_PREAMBLE_LEGACY, - NL80211_PREAMBLE_HT, - NL80211_PREAMBLE_VHT, - NL80211_PREAMBLE_DMG, -+ NL80211_PREAMBLE_HE, - }; - - /** -@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs { - * is valid) - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating - * the maximum FTMs per burst (if not present anything is valid) -+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if -+ * trigger based ranging measurement is supported -+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating -+ * if non trigger based ranging measurement is supported - * - * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number -@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa { - NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, -+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_CAPA_ATTR, -@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa { - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data - * (flag) -+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging -+ * measurement (flag). -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. -+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based -+ * ranging measurement (flag) -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. - * - * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal - * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number -@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req { - NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, -+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_REQ_ATTR, -@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes { - NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, - }; - -+/** -+ * enum nl80211_bss_color_attributes - BSS Color attributes -+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid -+ * -+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. -+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. -+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. -+ * -+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal -+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. -+ */ -+enum nl80211_bss_color_attributes { -+ __NL80211_HE_BSS_COLOR_ATTR_INVALID, -+ -+ NL80211_HE_BSS_COLOR_ATTR_COLOR, -+ NL80211_HE_BSS_COLOR_ATTR_DISABLED, -+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL, -+ -+ /* keep last */ -+ __NL80211_HE_BSS_COLOR_ATTR_LAST, -+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, -+}; -+ -+/** -+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes -+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid -+ * -+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag -+ * attribute for each interface type that supports AKM suites specified in -+ * %NL80211_IFTYPE_AKM_ATTR_SUITES -+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported -+ * AKM suites for the specified interface types. -+ * -+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal -+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. -+ */ -+enum nl80211_iftype_akm_attributes { -+ __NL80211_IFTYPE_AKM_ATTR_INVALID, -+ -+ NL80211_IFTYPE_AKM_ATTR_IFTYPES, -+ NL80211_IFTYPE_AKM_ATTR_SUITES, -+ -+ /* keep last */ -+ __NL80211_IFTYPE_AKM_ATTR_LAST, -+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, -+}; - - #endif /* __LINUX_NL80211_H */ |