iptables: remove obsolete files

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45494

16 files changed, 0 insertions, 454 deletions

diff --git a/package/network/utils/iptables/files/l7/aim.pat b/package/network/utils/iptables/files/l7/aim.pat
deleted file mode 100644
index 5c43930fd3..0000000000
--- a/package/network/utils/iptables/files/l7/aim.pat
+++ /dev/null
@@ -1,28 +0,0 @@
-# AIM - AOL instant messenger (OSCAR and TOC)
-# Pattern attributes: good slow notsofast
-# Protocol groups: chat proprietary
-# Wiki: http://www.protocolinfo.org/wiki/AIM
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 5190
-#
-# This may also match ICQ traffic.
-# 
-# This pattern has been tested and is believed to work well.
-
-aim
-# See http://gridley.res.carleton.edu/~straitm/final (and various other places)
-# The first bit matches OSCAR signon and data commands, but not sure what
-# \x03\x0b matches, but it works apparently.
-# The next three bits match various parts of the TOC signon process.
-# The third one is the magic number "*", then 0x01 for "signon", then up to four
-# bytes ("up to" because l7-filter strips out nulls) which contain a sequence
-# number (2 bytes) the data length (2 more) and 3 nulls (which don't count), 
-# then 0x01 for the version number (not sure if there ever has been another 
-# version)
-# The fourth one is a command string, followed by some stuff, then the
-# beginning of the "roasted" password
-
-# This pattern is too slow!
-
-^(\*[\x01\x02].*\x03\x0b|\*\x01.?.?.?.?\x01)|flapon|toc_signon.*0x
diff --git a/package/network/utils/iptables/files/l7/bittorrent.pat b/package/network/utils/iptables/files/l7/bittorrent.pat
deleted file mode 100644
index 4a3ba88d58..0000000000
--- a/package/network/utils/iptables/files/l7/bittorrent.pat
+++ /dev/null
@@ -1,25 +0,0 @@
-# Bittorrent - P2P filesharing / publishing tool - http://www.bittorrent.com
-# Pattern attributes: good slow594 notsofast undermatch
-# Protocol groups: p2p open_source
-# Wiki: http://www.protocolinfo.org/wiki/Bittorrent
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# This pattern has been tested and is believed to work well.
-# It will, however, not work on bittorrent streams that are encrypted, since
-# it's impossible to match (well) encrypted data.
-
-bittorrent
-
-# Does not attempt to match the HTTP download of the tracker
-# 0x13 is the length of "bittorrent protocol"
-# Second two bits match UDP wierdness
-# Next bit matches something Azureus does
-# Ditto on the next bit.  Could also match on "user-agent: azureus", but that's in the next
-# packet and perhaps this will match multiple clients.
-# bitcomet-specific strings contributed by liangjun.
-
-# This is not a valid GNU basic regular expression (but that's ok).
-^(\x13bittorrent protocol|azver\x01$|get /scrape\?info_hash=get /announce\?info_hash=|get /client/bitcomet/|GET /data\?fid=)|d1:ad2:id20:|\x08'7P\)[RP]
-
-# This pattern is "fast", but won't catch as much
-#^(\x13bittorrent protocol|azver\x01$|get /scrape\?info_hash=)
diff --git a/package/network/utils/iptables/files/l7/edonkey.pat b/package/network/utils/iptables/files/l7/edonkey.pat
deleted file mode 100644
index 75807f8ebb..0000000000
--- a/package/network/utils/iptables/files/l7/edonkey.pat
+++ /dev/null
@@ -1,37 +0,0 @@
-# eDonkey2000 - P2P filesharing - http://edonkey2000.com and others
-# Pattern attributes: good veryfast fast overmatch
-# Protocol groups: p2p
-# Wiki: http://www.protocolinfo.org/wiki/EDonkey
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Tested recently (April/May 2006) with eMule 0.47a and eDonkey2000 1.4
-# and a long time ago with something else. 
-# 
-# In addition to matching what you might expect, this matches much of
-# what eMule does when you tell it to only connect to the KAD network. 
-# I don't quite know what to make of this.
-
-# Thanks to Matt Skidmore <fox AT woozle.org>
-
-edonkey
-
-# http://gd.tuwien.ac.at/opsys/linux/sf/p/pdonkey/eDonkey-protocol-0.6
-#
-# In addition to \xe3, \xc5 and \xd4, I see a lot of \xe5.
-# As of April 2006, I also see some \xe4.
-#
-# God this is a mess.  What an irritating protocol.  
-# This will match about 2% of streams with random data in them!
-# (But fortunately much fewer than 2% of streams that are other protocols.
-# You can test this with the data in ../testing/)
-
-^[\xc5\xd4\xe3-\xe5].?.?.?.?([\x01\x02\x05\x14\x15\x16\x18\x19\x1a\x1b\x1c\x20\x21\x32\x33\x34\x35\x36\x38\x40\x41\x42\x43\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f\x50\x51\x52\x53\x54\x55\x56\x57\x58[\x60\x81\x82\x90\x91\x93\x96\x97\x98\x99\x9a\x9b\x9c\x9e\xa0\xa1\xa2\xa3\xa4]|\x59................?[ -~]|\x96....$)
-
-# matches everything and too much 
-# ^(\xe3|\xc5|\xd4)
-
-# ipp2p essentially uses "\xe3....\x47", which doesn't seem at all right to me.
-
-# bandwidtharbitrator uses 
-# e0.*@.*6[a-z].*p$|e0.*@.*[a-z]6[a-z].*p0$|e.*@.*[0-9]6.*p$|emule|edonkey
-# no comments to explain what all the mush is, of course...
diff --git a/package/network/utils/iptables/files/l7/fasttrack.pat b/package/network/utils/iptables/files/l7/fasttrack.pat
deleted file mode 100644
index 6ed8ff1d13..0000000000
--- a/package/network/utils/iptables/files/l7/fasttrack.pat
+++ /dev/null
@@ -1,23 +0,0 @@
-# FastTrack - P2P filesharing (Kazaa, Morpheus, iMesh, Grokster, etc)
-# Pattern attributes: good slow notsofast
-# Protocol groups: p2p
-# Wiki: http://www.protocolinfo.org/wiki/Fasttrack
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Tested with Kazaa Lite Resurrection 0.0.7.6F
-#
-# This appears to match the download connections well, but not the search
-# connections (I think they are encrypted :-( ).
-
-fasttrack
-# while this is a valid http request, this will be caught because
-# the http pattern matches the response (and therefore the next packet)
-# Even so, it's best to put this match earlier in the chain.
-# http://cvs.berlios.de/cgi-bin/viewcvs.cgi/gift-fasttrack/giFT-FastTrack/PROTOCOL?rev=HEAD&content-type=text/vnd.viewcvs-markup
-
-# This pattern is kinda slow, but not too bad.
-^get (/.download/[ -~]*|/.supernode[ -~]|/.status[ -~]|/.network[ -~]*|/.files|/.hash=[0-9a-f]*/[ -~]*) http/1.1|user-agent: kazaa|x-kazaa(-username|-network|-ip|-supernodeip|-xferid|-xferuid|tag)|^give [0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]?[0-9]?[0-9]?
-
-# This isn't much faster:
-#^get (/.download/.*|/.supernode.|/.status.|/.network.*|/.files|/.hash=[0-9a-f]*/.*) http/1.1|user-agent: kazaa|x-kazaa(-username|-network|-ip|-supernodeip|-xferid|-xferuid|tag)|^give [0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]?[0-9]?[0-9]?
-
diff --git a/package/network/utils/iptables/files/l7/ftp.pat b/package/network/utils/iptables/files/l7/ftp.pat
deleted file mode 100644
index 44d97c467b..0000000000
--- a/package/network/utils/iptables/files/l7/ftp.pat
+++ /dev/null
@@ -1,46 +0,0 @@
-# FTP - File Transfer Protocol - RFC 959
-# Pattern attributes: great notsofast fast
-# Protocol groups: document_retrieval ietf_internet_standard
-# Wiki: http://protocolinfo.org/wiki/FTP
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 21.  Note that the data stream is on a dynamically
-# assigned port, which means that you will need the FTP connection 
-# tracking module in your kernel to usefully match FTP data transfers.
-# 
-# This pattern is well tested.
-#
-# Handles the first two things a server should say:
-#
-# First, the server says it's ready by sending "220".  Most servers say 
-# something after 220, even though they don't have to, and it usually 
-# includes the string "ftp" (l7-filter is case insensitive). This 
-# includes proftpd, vsftpd, wuftpd, warftpd, pureftpd, Bulletproof FTP 
-# Server, and whatever ftp.microsoft.com uses.  Almost all servers use only 
-# ASCII printable characters between the "220" and the "FTP", but non-English
-# ones might use others.
-# 
-# The next thing the server sends is a 331.  All the above servers also 
-# send something including "password" after this code.  By default, we 
-# do not match on this because it takes another packet and is more work 
-# for regexec.
-
-ftp
-# by default, we allow only ASCII
-^220[\x09-\x0d -~]*ftp
-
-# This covers UTF-8 as well 
-#^220[\x09-\x0d -~\x80-\xfd]*ftp
-
-# This allows any characters and is about 4x faster than either of the above 
-# (which are about the same as each other)
-#^220.*ftp
-
-# This is much slower
-#^220[\x09-\x0d -~]*ftp|331[\x09-\x0d -~]*password
-
-# This pattern is more precise, but takes longer to match. (3 packets vs. 1)
-#^220[\x09-\x0d -~]*\x0d\x0aUSER[\x09-\x0d -~]*\x0d\x0a331
-
-# same as above, but slightly less precise and only takes 2 packets.
-#^220[\x09-\x0d -~]*\x0d\x0aUSER[\x09-\x0d -~]*\x0d\x0a
diff --git a/package/network/utils/iptables/files/l7/gnutella.pat b/package/network/utils/iptables/files/l7/gnutella.pat
deleted file mode 100644
index 770ed43b36..0000000000
--- a/package/network/utils/iptables/files/l7/gnutella.pat
+++ /dev/null
@@ -1,34 +0,0 @@
-# Gnutella - P2P filesharing
-# Pattern attributes: good notsofast notsofast
-# Protocol groups: p2p open_source
-# Wiki: http://www.protocolinfo.org/wiki/Gnutella
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# This should match both Gnutella and "Gnutella2" ("Mike's protocol")
-# 
-# Various clients use this protocol including Mactella, Shareaza,
-# GTK-gnutella, Gnucleus, Gnotella, LimeWire, iMesh and BearShare.
-# 
-# This is tested with gtk-gnutella and Shareaza.
-
-# http://www.gnutella2.com/tiki-index.php?page=UDP%20Transceiver
-# http://rfc-gnutella.sf.net/
-# http://www.gnutella2.com/tiki-index.php?page=Gnutella2%20Specification
-# http://en.wikipedia.org/wiki/Shareaza
-
-gnutella
-
-# The first part matches UDP messages - All start with "GND", then have
-# a flag byte which is either \x00, \x01 or \x02, then two sequence bytes
-# that can be anything, then a fragment number, which must start at 1.
-# The rest matches TCP first client message or first server message (in case 
-# we can't see client messages).  Some parts of this are empirical rather than 
-# document based.  Assumes version is between 0.0 and 2.9. (usually is
-# 0.4 or 0.6).  I'm guessing at many of the user-agents.
-# The last bit is emprical and probably only matches Limewire.
-^(gnd[\x01\x02]?.?.?\x01|gnutella connect/[012]\.[0-9]\x0d\x0a|get /uri-res/n2r\?urn:sha1:|get /.*user-agent: (gtk-gnutella|bearshare|mactella|gnucleus|gnotella|limewire|imesh)|get /.*content-type: application/x-gnutella-packets|giv [0-9]*:[0-9a-f]*/|queue [0-9a-f]* [1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?:[1-9][0-9]?[0-9]?[0-9]?|gnutella.*content-type: application/x-gnutella|...................?lime)
-
-# Needlessly precise, at the expense of time
-#^(gnd[\x01\x02]?.?.?\x01|gnutella connect/[012]\.[0-9]\x0d\x0a|get /uri-res/n2r\?urn:sha1:|get /[\x09-\x0d -~]*user-agent: (gtk-gnutella|bearshare|mactella|gnucleus|gnotella|limewire|imesh)|get /[\x09-\x0d -~]*content-type: application/x-gnutella-packets|giv [0-9]*:[0-9a-f]*/|queue [0-9a-f]* [1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?:[1-9][0-9]?[0-9]?[0-9]?|gnutella[\x09-\x0d -~]*content-type: application/x-gnutella|..................lime)
-
-
diff --git a/package/network/utils/iptables/files/l7/http.pat b/package/network/utils/iptables/files/l7/http.pat
deleted file mode 100644
index 5122310d2f..0000000000
--- a/package/network/utils/iptables/files/l7/http.pat
+++ /dev/null
@@ -1,28 +0,0 @@
-# HTTP - HyperText Transfer Protocol - RFC 2616
-# Pattern attributes: great slow notsofast superset
-# Protocol groups: document_retrieval ietf_draft_standard
-# Wiki: http://protocolinfo.org/wiki/HTTP
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 80
-#
-# This pattern has been tested and is believed to work well.
-#
-# this intentionally catches the response from the server rather than
-# the request so that other protocols which use http (like kazaa) can be
-# caught based on specific http requests regardless of the ordering of
-# filters... also matches posts
-
-# Sites that serve really long cookies may break this by pushing the
-# server response too far away from the beginning of the connection. To
-# fix this, increase the kernel's data buffer length.
-
-http
-# Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF (rfc 2616)
-# As specified in rfc 2616 a status code is preceeded and followed by a
-# space. 
-http/(0\.9|1\.0|1\.1) [1-5][0-9][0-9] [\x09-\x0d -~]*(connection:|content-type:|content-length:|date:)|post [\x09-\x0d -~]* http/[01]\.[019]
-# A slightly faster version that might be good enough:
-#http/(0\.9|1\.0|1\.1) [1-5][0-9][0-9]|post [\x09-\x0d -~]* http/[01]\.[019]
-# old pattern(s):
-#(http[\x09-\x0d -~]*(200 ok|302 |304 )[\x09-\x0d -~]*(connection:|content-type:|content-length:))|^(post [\x09-\x0d -~]* http/)
diff --git a/package/network/utils/iptables/files/l7/ident.pat b/package/network/utils/iptables/files/l7/ident.pat
deleted file mode 100644
index 3205e5e696..0000000000
--- a/package/network/utils/iptables/files/l7/ident.pat
+++ /dev/null
@@ -1,15 +0,0 @@
-# Ident - Identification Protocol - RFC 1413
-# Pattern attributes: good fast fast
-# Protocol groups: networking ietf_proposed_standard
-# Wiki: http://www.protocolinfo.org/wiki/Ident
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 113
-#
-# This pattern is believed to work.
-
-ident
-# "number , numberCRLF" possibly without the CR and/or LF.
-# ^$ is appropriate because the first packet should never have anything
-# else in it.
-^[1-9][0-9]?[0-9]?[0-9]?[0-9]?[\x09-\x0d]*,[\x09-\x0d]*[1-9][0-9]?[0-9]?[0-9]?[0-9]?(\x0d\x0a|[\x0d\x0a])?$
diff --git a/package/network/utils/iptables/files/l7/irc.pat b/package/network/utils/iptables/files/l7/irc.pat
deleted file mode 100644
index e25360cafb..0000000000
--- a/package/network/utils/iptables/files/l7/irc.pat
+++ /dev/null
@@ -1,20 +0,0 @@
-# IRC - Internet Relay Chat - RFC 1459
-# Pattern attributes: great veryfast fast
-# Protocol groups: chat ietf_proposed_standard
-# Wiki: http://www.protocolinfo.org/wiki/IRC
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 6666 or 6667
-# Note that chat traffic runs on these ports, but IRC-DCC traffic (which
-# can use much more bandwidth) uses a dynamically assigned port, so you 
-# must have the IRC connection tracking module in your kernel to classify
-# this.
-#
-# This pattern has been tested and is believed to work well.
-
-irc
-# First thing that happens is that the client sends NICK and USER, in 
-# either order.  This allows MIRC color codes (\x02-\x0d instead of
-# \x09-\x0d).
-^(nick[\x09-\x0d -~]*user[\x09-\x0d -~]*:|user[\x09-\x0d -~]*:[\x02-\x0d -~]*nick[\x09-\x0d -~]*\x0d\x0a)
-
diff --git a/package/network/utils/iptables/files/l7/jabber.pat b/package/network/utils/iptables/files/l7/jabber.pat
deleted file mode 100644
index 7c328905ee..0000000000
--- a/package/network/utils/iptables/files/l7/jabber.pat
+++ /dev/null
@@ -1,24 +0,0 @@
-# Jabber (XMPP) - open instant messenger protocol - RFC 3920 - http://jabber.org
-# Pattern attributes: good notsofast notsofast
-# Protocol groups: chat ietf_proposed_standard
-# Wiki: http://www.protocolinfo.org/wiki/Jabber
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# This pattern has been tested with Gaim and Gabber.  It is only tested 
-# with non-SSL mode Jabber with no proxies.
-
-# Thanks to Jan Hudec for some improvements.
-
-# Jabber seems to take a long time to set up a connection.  I'm
-# connecting with Gabber 0.8.8 to 12jabber.org and the first 8 packets
-# is this:
-# <stream:stream to='12jabber.com' xmlns='jabber:client'
-# xmlns:stream='http://etherx.jabber.org/streams'><?xml
-# version='1.0'?><stream:stream
-# xmlns:stream='http://etherx.jabber.org/streams' id='3f73e951'
-# xmlns='jabber:client' from='12jabber.com'>
-#
-# No mention of my username or password yet, you'll note.
-
-jabber
-<stream:stream[\x09-\x0d ][ -~]*[\x09-\x0d ]xmlns=['"]jabber
diff --git a/package/network/utils/iptables/files/l7/msnmessenger.pat b/package/network/utils/iptables/files/l7/msnmessenger.pat
deleted file mode 100644
index 11dfc10be2..0000000000
--- a/package/network/utils/iptables/files/l7/msnmessenger.pat
+++ /dev/null
@@ -1,28 +0,0 @@
-# MSN Messenger - Microsoft Network chat client
-# Pattern attributes: good slow notsofast
-# Protocol groups: chat proprietary
-# Wiki: http://www.protocolinfo.org/wiki/MSN_Messenger
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually uses TCP port 1863
-# http://www.hypothetic.org/docs/msn/index.php
-# http://msnpiki.msnfanatic.com/
-#
-# This pattern has been tested and is believed to work well.
-
-msnmessenger
-
-# First branch: login
-#   ver: allow versions up to 99.
-#   I've never seen a cvr other than cvr0.  Maybe this will be trouble later?
-#   Can't anchor at the beginning because sometimes this is encapsulated in
-#   HTTP.  But either way, the first packet ends like this.
-# Second/Third branches: accepting/sending a message
-#   I will assume that these can also be encapsulated in HTTP, although I have
-#   not checked.  Example of each direction:
-#   ANS 1 quadong@hotmail.com 1139803431.29427 17522047
-#   USR 1 quadong@hotmail.com 530423708.968145.366138
-
-# Branches are written entirely separately for better performance.
-ver [0-9]+ msnp[1-9][0-9]? [\x09-\x0d -~]*cvr0\x0d\x0a$|usr 1 [!-~]+ [0-9. ]+\x0d\x0a$|ans 1 [!-~]+ [0-9. ]+\x0d\x0a$
-
diff --git a/package/network/utils/iptables/files/l7/ntp.pat b/package/network/utils/iptables/files/l7/ntp.pat
deleted file mode 100644
index 760cfdbe59..0000000000
--- a/package/network/utils/iptables/files/l7/ntp.pat
+++ /dev/null
@@ -1,17 +0,0 @@
-# (S)NTP - (Simple) Network Time Protocol - RFCs 1305 and 2030
-# Pattern attributes: good fast fast overmatch 
-# Protocol groups: time_synchronization ietf_draft_standard
-# Wiki: http://www.protocolinfo.org/wiki/NTP
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# This pattern is tested and is believed to work.
-
-# client|server
-# Requires the server's timestamp to be in the present or future (of 2005).
-# Tested with ntpdate on Linux.
-# Assumes version 2, 3 or 4.
-
-# Note that ntp packets are always 48 bytes, so you should match on that too.
-
-ntp
-^([\x13\x1b\x23\xd3\xdb\xe3]|[\x14\x1c$].......?.?.?.?.?.?.?.?.?[\xc6-\xff])
diff --git a/package/network/utils/iptables/files/l7/pop3.pat b/package/network/utils/iptables/files/l7/pop3.pat
deleted file mode 100644
index 3ae4c147bb..0000000000
--- a/package/network/utils/iptables/files/l7/pop3.pat
+++ /dev/null
@@ -1,50 +0,0 @@
-# POP3 - Post Office Protocol version 3 (popular e-mail protocol) - RFC 1939
-# Pattern attributes: great veryfast fast
-# Protocol groups: mail ietf_internet_standard
-# Wiki: http://www.protocolinfo.org/wiki/POP
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# This pattern has been tested somewhat.
-
-# this is a difficult protocol to match because of the relative lack of 
-# distinguishing information.  Read on.
-pop3
-
-# this the most conservative pattern.  It should definitely work.
-#^(\+ok|-err)
-
-# this pattern assumes that the server says _something_ after +ok or -err
-# I think this is probably the way to go.
-^(\+ok |-err )
-
-# more that 90% of servers seem to say "pop" after "+ok", but not all.
-#^(\+ok .*pop)
-
-# Here's another tack. I think this is my second favorite.
-#^(\+ok [\x09-\x0d -~]*(ready|hello|pop|starting)|-err [\x09-\x0d -~]*(invalid|unknown|unimplemented|unrecognized|command))
-
-# this matches the server saying "you have N messages that are M bytes",
-# which the client probably asks for early in the session (not tested)
-#\+ok [0-9]+ [0-9]+
-
-# some sample servers:
-# RFC example:        +OK POP3 server ready <1896.697170952@dbc.mtview.ca.us>
-# mail.dreamhost.com: +OK Hello there.
-# pop.carleton.edu:   +OK POP3D(*) Server PMDFV6.2.2 at Fri, 12 Sep 2003 19:28:10 -0500 (CDT) (APOP disabled)
-# mail.earthlink.net: +OK NGPopper vEL_4_38 at earthlink.net ready <25509.1063412951@falcon>
-# *.email.umn.edu:    +OK Cubic Circle's v1.22 1998/04/11 POP3 ready <7d1e0000da67623f@aquamarine.tc.umn.edu>
-# mail.yale.edu:      +OK POP3 pantheon-po01 v2002.81 server ready
-# mail.gustavus.edu:  +OK POP3 solen v2001.78 server ready
-# mail.reed.edu:      +OK POP3 letra.reed.edu v2002.81 server ready
-# mail.bowdoin.edu:   +OK mail.bowdoin.edu POP3 service (iPlanet Messaging Server 5.2 HotFix 1.15 (built Apr 28 2003))
-# pop.colby.edu:      +OK Qpopper (version 4.0.5) at basalt starting.
-# mail.mac.com:       +OK Netscape Messaging Multiplexor ready
-
-# various error strings:
-#-ERR Invalid command.
-#-ERR invalid command
-#-ERR unimplemented
-#-ERR Invalid command, try one of: USER name, PASS string, QUIT
-#-ERR Unknown AUTHORIZATION state command
-#-ERR Unrecognized command
-#-ERR Unknown command: "sadf'".
diff --git a/package/network/utils/iptables/files/l7/smtp.pat b/package/network/utils/iptables/files/l7/smtp.pat
deleted file mode 100644
index 2f5d1957f9..0000000000
--- a/package/network/utils/iptables/files/l7/smtp.pat
+++ /dev/null
@@ -1,40 +0,0 @@
-# SMTP - Simple Mail Transfer Protocol - RFC 2821 (See also RFC 1869)
-# Pattern attributes: great notsofast fast
-# Protocol groups: mail ietf_internet_standard
-# Wiki: http://www.protocolinfo.org/wiki/SMTP
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# usually runs on port 25
-# 
-# This pattern has been tested and is believed to work well.
-
-# As usual, no text is required after "220", but all known servers have some
-# there.  It (almost?) always has string "smtp" in it.  The RFC examples
-# does not, so we match those too, just in case anyone has copied them 
-# literally.
-#
-# Some examples:
-# 220 mail.stalker.com ESMTP CommuniGate Pro 4.1.3
-# 220 mail.vieodata.com ESMTP Merak 6.1.0; Mon, 15 Sep 2003 13:48:11 -0400
-# 220 mail.ut.caldera.com ESMTP
-# 220 persephone.pmail.gen.nz ESMTP server ready.
-# 220 smtp1.superb.net ESMTP
-# 220 mail.kerio.com Kerio MailServer 5.6.7 ESMTP ready
-# 220-mail.deerfield.com ESMTP VisNetic.MailServer.v6.0.9.0; Mon, 15 Sep 2003 13:4
-# 220 altn.com ESMTP MDaemon 6.8.5; Mon, 15 Sep 2003 12:46:42 -0500
-# 220 X1 NT-ESMTP Server ipsmin0165atl2.interland.net (IMail 6.06 73062-3)
-# 220 mail.icewarp.com ESMTP Merak 6.1.1; Mon, 15 Sep 2003 19:43:23 +0200
-# 220-mail.email-scan.com ESMTP
-# 220 smaug.dreamhost.com ESMTP
-# 220 kona.carleton.edu -- Server ESMTP (PMDF V6.2#30648)
-# 220 letra.reed.edu ESMTP Sendmail 8.12.9/8.12.9; Mon, 15 Sep 2003 10:35:57 -0700 (PDT)
-# 220-swan.mail.pas.earthlink.net ESMTP Exim 3.33 #1 Mon, 15 Sep 2003 10:32:15 -0700
-# 
-# RFC examples:
-# 220 xyz.com Simple Mail Transfer Service Ready (RFC example)
-# 220 dbc.mtview.ca.us SMTP service ready
-
-smtp
-^220[\x09-\x0d -~]* (e?smtp|simple mail)
-userspace pattern=^220[\x09-\x0d -~]* (E?SMTP|[Ss]imple [Mm]ail)
-userspace flags=REG_NOSUB REG_EXTENDED
diff --git a/package/network/utils/iptables/files/l7/ssl.pat b/package/network/utils/iptables/files/l7/ssl.pat
deleted file mode 100644
index ae30ee4400..0000000000
--- a/package/network/utils/iptables/files/l7/ssl.pat
+++ /dev/null
@@ -1,16 +0,0 @@
-# SSL and TLS - Secure Socket Layer / Transport Layer Security - RFC 2246
-# Pattern attributes: good notsofast fast superset
-# Protocol groups: secure ietf_proposed_standard
-# Wiki: http://www.protocolinfo.org/wiki/SSL
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# Usually runs on port 443
-#
-# This is a superset of validcertssl.  For it to match, it must be first.
-# 
-# This pattern has been tested and is believed to work well.
-
-ssl
-# Server Hello with certificate | Client Hello
-# This allows SSL 3.X, which includes TLS 1.0, known internally as SSL 3.1
-^(.?.?\x16\x03.*\x16\x03|.?.?\x01\x03\x01?.*\x0b)
diff --git a/package/network/utils/iptables/files/l7/vnc.pat b/package/network/utils/iptables/files/l7/vnc.pat
deleted file mode 100644
index 79d0ae8a28..0000000000
--- a/package/network/utils/iptables/files/l7/vnc.pat
+++ /dev/null
@@ -1,23 +0,0 @@
-# VNC - Virtual Network Computing.  Also known as RFB - Remote Frame Buffer
-# Pattern attributes: great veryfast fast
-# Protocol groups: remote_access
-# Wiki: http://www.protocolinfo.org/wiki/VNC
-# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
-#
-# http://www.realvnc.com/documentation.html
-# 
-# This pattern has been verified with vnc v3.3.7 on WinXP and Linux
-#
-# Thanks to Trevor Paskett <tpaskett AT cymphonix.com> for this pattern.
-
-vnc
-# Assumes single digit major and minor version numbers 
-# This message should be all alone in the first packet, so ^$ is appropriate
-^rfb 00[1-9]\.00[0-9]\x0a$
-
-# This is a more restrictive version which assumes the version numbers
-# are ones actually in existance at the time of this writing, i.e. 3.3,
-# 3.7 and 3.8 (with some clients wrongly reporting 3.5).  It should be
-# slightly faster, but probably not worth the extra maintenance. 
-# ^rfb 003\.00[3578]\x0a$
-