aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/utils/comgt/files
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-10-10 08:56:33 +0000
committerJohn Crispin <john@openwrt.org>2014-10-10 08:56:33 +0000
commit51a5ff094703c4db984284913d605e83e819d99c (patch)
tree7e5206fa9f0cb29d8c80b2190e8be7d682afdfff /package/network/utils/comgt/files
parentd83efbadee946ced7f1bad1ea4d7fd8b9d372d10 (diff)
downloadupstream-51a5ff094703c4db984284913d605e83e819d99c.tar.gz
upstream-51a5ff094703c4db984284913d605e83e819d99c.tar.bz2
upstream-51a5ff094703c4db984284913d605e83e819d99c.zip
comgt: add ncm proto support
This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866
Diffstat (limited to 'package/network/utils/comgt/files')
-rw-r--r--package/network/utils/comgt/files/3g.usb2
-rw-r--r--package/network/utils/comgt/files/ncm.json49
-rw-r--r--package/network/utils/comgt/files/ncm.sh156
-rw-r--r--package/network/utils/comgt/files/runcommand.gcom26
4 files changed, 232 insertions, 1 deletions
diff --git a/package/network/utils/comgt/files/3g.usb b/package/network/utils/comgt/files/3g.usb
index fd6837e650..ac8326b710 100644
--- a/package/network/utils/comgt/files/3g.usb
+++ b/package/network/utils/comgt/files/3g.usb
@@ -8,7 +8,7 @@ find_3g_iface() {
local proto
config_get proto "$cfg" proto
- [ "$proto" = 3g ] || return 0
+ [ "$proto" = 3g ] || [ "$proto" = ncm ] || return 0
# bypass state vars here because 00-netstate could clobber .device
local dev=$(uci_get network "$cfg" device)
diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json
new file mode 100644
index 0000000000..b9b15cdba0
--- /dev/null
+++ b/package/network/utils/comgt/files/ncm.json
@@ -0,0 +1,49 @@
+{
+ "huawei": {
+ "initialize": [
+ "AT",
+ "ATZ",
+ "ATQ0",
+ "ATV1",
+ "ATE1",
+ "ATS0=0"
+ ],
+ "modes": {
+ "preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "preferumts": "AT^SYSCFGEX=\\\"0201\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "lte": "AT^SYSCFGEX=\\\"03\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "umts": "AT^SYSCFGEX=\\\"02\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,",
+ "auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,,"
+ },
+ "connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
+ "disconnect": "AT^NDISDUP=1,0"
+ },
+ "SAMSUNG": {
+ "initialize": [
+ "AT",
+ "AT+CGREG=2",
+ "AT+CFUN=5",
+ "AT+MODESELECT=3",
+ "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\""
+ ],
+ "modes": {
+ "umts": "AT+CHANGEALLPATH=1"
+ },
+ "connect": "AT+CGATT=1",
+ "disconnect": "AT+CGATT=0"
+ },
+ "Sony": {
+ "initialize": [
+ "AT+CFUN=1",
+ "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"",
+ "AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
+ ],
+ "modes": {
+ "umts": "AT+CFUN=6",
+ "gsm": "AT+CFUN=5"
+ },
+ "connect": "AT*ENAP=1,1",
+ "disconnect": "AT*ENAP=0"
+ }
+}
diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
new file mode 100644
index 0000000000..14e421fcad
--- /dev/null
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -0,0 +1,156 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_ncm_init_config() {
+ no_device=1
+ available=1
+ proto_config_add_string "device:device"
+ proto_config_add_string apn
+ proto_config_add_string auth
+ proto_config_add_string username
+ proto_config_add_string password
+ proto_config_add_string pincode
+ proto_config_add_string delay
+ proto_config_add_string mode
+}
+
+proto_ncm_setup() {
+ local interface="$1"
+
+ local manufacturer initialize setmode connect
+
+ local device apn auth username password pincode delay mode
+ json_get_vars device apn auth username password pincode delay mode
+
+ [ -n "$device" ] || {
+ echo "ncm[$$]" "No control device specified"
+ proto_notify_error "$interface" NO_DEVICE
+ proto_set_available "$interface" 0
+ return 1
+ }
+ [ -e "$device" ] || {
+ echo "ncm[$$]" "Control device not valid"
+ proto_set_available "$interface" 0
+ return 1
+ }
+ [ -n "$apn" ] || {
+ echo "ncm[$$]" "No APN specified"
+ proto_notify_error "$interface" NO_APN
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ [ -n "$delay" ] && sleep "$delay"
+
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer"
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ proto_set_available "$interface" 0
+ return 1
+ }
+ json_get_values initialize initialize
+ for i in $initialize; do
+ eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to initialize modem"
+ proto_notify_error "$interface" INITIALIZE_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+ done
+
+ [ -n "$pincode" ] && {
+ PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+ echo "ncm[$$]" "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ }
+ [ -n "$mode" ] && {
+ json_select modes
+ json_get_var setmode "$mode"
+ COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to set operating mode"
+ proto_notify_error "$interface" SETMODE_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+ json_select ..
+ }
+
+ json_get_var connect connect
+ eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to connect"
+ proto_notify_error "$interface" CONNECT_FAILED
+ proto_set_available "$interface" 0
+ return 1
+ }
+
+ echo "ncm[$$]" "Connected, starting DHCP"
+ proto_init_update "*" 1
+ proto_send_update "$interface"
+
+ json_init
+ json_add_string name "${interface}_dhcp"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+
+ json_init
+ json_add_string name "${interface}_dhcpv6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+}
+
+proto_ncm_teardown() {
+ local interface="$1"
+
+ proto_init_update "*" 0
+ proto_send_update "$interface"
+
+ local manufacturer disconnect
+
+ local device
+ json_get_vars device
+
+ echo "ncm[$$]" "Stopping network"
+
+ manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+ [ $? -ne 0 ] && {
+ echo "ncm[$$]" "Failed to get modem information"
+ proto_notify_error "$interface" GETINFO_FAILED
+ return 1
+ }
+
+ json_load "$(cat /etc/gcom/ncm.json)"
+ json_select "$manufacturer" || {
+ echo "ncm[$$]" "Unsupported modem"
+ proto_notify_error "$interface" UNSUPPORTED_MODEM
+ return 1
+ }
+
+ json_get_var disconnect disconnect
+ COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+ echo "ncm[$$]" "Failed to disconnect"
+ proto_notify_error "$interface" DISCONNECT_FAILED
+ return 1
+ }
+}
+
+add_protocol ncm
diff --git a/package/network/utils/comgt/files/runcommand.gcom b/package/network/utils/comgt/files/runcommand.gcom
new file mode 100644
index 0000000000..6ba061ff98
--- /dev/null
+++ b/package/network/utils/comgt/files/runcommand.gcom
@@ -0,0 +1,26 @@
+# run AT-command from environment
+opengt
+ set com 115200n81
+ set senddelay 0.02
+ waitquiet 1 0.2
+ flash 0.1
+
+:start
+ send "sending -> "
+ send $env("COMMAND")
+ send "^n"
+
+ waitfor 15 "OK","ERR","ERROR"
+ if % = 0 goto continue
+ if % = 1 goto error
+ if % = 2 goto error
+
+ print "Timeout running AT-command\n"
+ exit 1
+
+:error
+ print "Error running AT-command\n"
+ exit 1
+
+:continue
+ exit 0