hostapd: update to v2.10

Upstreamed patches:
020-mesh-make-forwarding-configurable.patch
e6db1bc5da3fd7d5f4dba24aa102543b4749912f
550-WNM-allow-specifying-dialog-token.patch
979f19716539362f8ce60a77bf1b88fdcf5ba8e5
720-ACS-fix-channel-100-frequency.patch
2341585c349231af00cdef8d51458df01bc6965f
741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch
08bdf4f90de61a84ed8f4dd918272dd9d36e2e1f

Compile-tested: wpad-wolfssl hostapd-openssl
Run-tested: ath79-generic

Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>

7 files changed, 53 insertions, 443 deletions

diff --git a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
index d948c41b30..16d24d1000 100644
--- a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
+++ b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
@@ -14,16 +14,37 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
 
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2395,6 +2395,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2409,7 +2409,7 @@ static int drv_supports_vht(struct wpa_s
+ }
+ 
+ 
+-static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode)
++static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode, bool dfs_enabled)
+ {
+ 	int i;
+ 
+@@ -2418,7 +2418,10 @@ static bool ibss_mesh_is_80mhz_avail(int
+ 
+ 		chan = hw_get_channel_chan(mode, i, NULL);
+ 		if (!chan ||
+-		    chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++		    chan->flag & HOSTAPD_CHAN_DISABLED)
++			return false;
++		
++		if (!dfs_enabled && chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
+ 			return false;
+ 	}
+ 
+@@ -2447,6 +2450,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
  	int chwidth, seg0, seg1;
  	u32 vht_caps = 0;
- 	int is_24ghz;
-+	int dfs_enabled = wpa_s->conf->country[0] &&
-+			 (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
+ 	bool is_24ghz, is_6ghz;
++	bool dfs_enabled = wpa_s->conf->country[0] &&
++			   (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
  
  	freq->freq = ssid->frequency;
  
-@@ -2484,8 +2486,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2543,8 +2548,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
  		return;
  
  	/* Check primary channel flags */
@@ -36,7 +57,7 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  
  	freq->channel = pri_chan->chan;
  
-@@ -2518,8 +2523,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2577,8 +2585,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
  		return;
  
  	/* Check secondary channel flags */
@@ -49,20 +70,25 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  
  	if (ht40 == -1) {
  		if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
-@@ -2612,8 +2620,11 @@ skip_ht40:
- 			return;
+@@ -2667,7 +2678,7 @@ skip_to_6ghz:
+ 		return;
  
- 		/* Back to HT configuration if channel not usable */
--		if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+		if (chan->flag & HOSTAPD_CHAN_DISABLED)
- 			return;
-+		if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+			if (!dfs_enabled)
-+				return;
- 	}
+ 	/* Back to HT configuration if channel not usable */
+-	if (!ibss_mesh_is_80mhz_avail(channel, mode))
++	if (!ibss_mesh_is_80mhz_avail(channel, mode, dfs_enabled))
+ 		return;
  
  	chwidth = CHANWIDTH_80MHZ;
-@@ -2633,10 +2644,12 @@ skip_ht40:
+@@ -2681,7 +2692,7 @@ skip_to_6ghz:
+ 		 * above; check the remaining four 20 MHz channels for the total
+ 		 * of 160 MHz bandwidth.
+ 		 */
+-		if (!ibss_mesh_is_80mhz_avail(channel + 16, mode))
++		if (!ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled))
+ 			return;
+ 
+ 		for (j = 0; j < ARRAY_SIZE(bw160); j++) {
+@@ -2711,10 +2722,12 @@ skip_to_6ghz:
  				if (!chan)
  					continue;
  
diff --git a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch
deleted file mode 100644
index 75726a6750..0000000000
--- a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Apr 2018 19:24:31 +0200
-Subject: [PATCH 18/18] mesh: make forwarding configurable
-
-Allow mesh_fwding to be specified in a mesh bss config, pass that
-to the driver (only nl80211 implemented for now) and announce
-forwarding capability accordingly.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- src/ap/ap_config.h                 | 2 ++
- src/drivers/driver.h               | 2 ++
- src/drivers/driver_nl80211.c       | 3 +++
- wpa_supplicant/config.c            | 4 ++++
- wpa_supplicant/config.h            | 9 +++++++++
- wpa_supplicant/config_file.c       | 4 ++++
- wpa_supplicant/config_ssid.h       | 5 +++++
- wpa_supplicant/mesh.c              | 6 ++++++
- wpa_supplicant/mesh_mpm.c          | 4 ++--
- wpa_supplicant/wpa_supplicant.conf | 3 +++
- 10 files changed, 40 insertions(+), 2 deletions(-)
-
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -51,6 +51,7 @@ struct mesh_conf {
- 	int dot11MeshRetryTimeout; /* msec */
- 	int dot11MeshConfirmTimeout; /* msec */
- 	int dot11MeshHoldingTimeout; /* msec */
-+	int mesh_fwding;
- };
- 
- #define MAX_STA_COUNT 2007
-@@ -696,6 +697,7 @@ struct hostapd_bss_config {
- 
- #define MESH_ENABLED BIT(0)
- 	int mesh;
-+	int mesh_fwding;
- 
- 	u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
- 
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1584,6 +1584,7 @@ struct wpa_driver_mesh_bss_params {
- #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS	0x00000004
- #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE		0x00000008
- #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD	0x00000010
-+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING		0x00000020
- 	/*
- 	 * TODO: Other mesh configuration parameters would go here.
- 	 * See NL80211_MESHCONF_* for all the mesh config parameters.
-@@ -1593,6 +1594,7 @@ struct wpa_driver_mesh_bss_params {
- 	int peer_link_timeout;
- 	int max_peer_links;
- 	int rssi_threshold;
-+	int forwarding;
- 	u16 ht_opmode;
- };
- 
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -10456,6 +10456,9 @@ static int nl80211_put_mesh_config(struc
- 	if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- 	     nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- 			params->auto_plinks)) ||
-+	    ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
-+	     nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
-+			params->forwarding)) ||
- 	    ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
- 	     nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- 			 params->max_peer_links)) ||
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -2527,6 +2527,7 @@ static const struct parse_data ssid_fiel
- #ifdef CONFIG_MESH
- 	{ INT_RANGE(mode, 0, 5) },
- 	{ INT_RANGE(no_auto_peer, 0, 1) },
-+	{ INT_RANGE(mesh_fwding, 0, 1) },
- 	{ INT_RANGE(mesh_rssi_threshold, -255, 1) },
- #else /* CONFIG_MESH */
- 	{ INT_RANGE(mode, 0, 4) },
-@@ -3106,6 +3107,7 @@ void wpa_config_set_network_defaults(str
- 	ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
- 	ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
- 	ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
-+	ssid->mesh_fwding = DEFAULT_MESH_FWDING;
- 	ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
- #endif /* CONFIG_MESH */
- #ifdef CONFIG_HT_OVERRIDES
-@@ -4347,6 +4349,7 @@ struct wpa_config * wpa_config_alloc_emp
- 	config->user_mpm = DEFAULT_USER_MPM;
- 	config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
- 	config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
-+	config->mesh_fwding = DEFAULT_MESH_FWDING;
- 	config->dot11RSNASAERetransPeriod =
- 		DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
- 	config->fast_reauth = DEFAULT_FAST_REAUTH;
-@@ -5047,6 +5050,7 @@ static const struct global_parse_data gl
- 	{ INT(user_mpm), 0 },
- 	{ INT_RANGE(max_peer_links, 0, 255), 0 },
- 	{ INT(mesh_max_inactivity), 0 },
-+	{ INT_RANGE(mesh_fwding, 0, 1), 0 },
- 	{ INT(dot11RSNASAERetransPeriod), 0 },
- #endif /* CONFIG_MESH */
- 	{ INT(disable_scan_offload), 0 },
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -18,6 +18,7 @@
- #define DEFAULT_USER_MPM 1
- #define DEFAULT_MAX_PEER_LINKS 99
- #define DEFAULT_MESH_MAX_INACTIVITY 300
-+#define DEFAULT_MESH_FWDING 1
- /*
-  * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
-  * but use 1000 ms in practice to avoid issues on low power CPUs.
-@@ -1378,6 +1379,14 @@ struct wpa_config {
- 	int mesh_max_inactivity;
- 
- 	/**
-+	 * mesh_fwding - Mesh network layer-2 forwarding
-+	 *
-+	 * This controls whether to enable layer-2 forwarding.
-+	 * By default: 1: enabled
-+	 */
-+	int mesh_fwding;
-+
-+	/**
- 	 * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
- 	 *
- 	 * This timeout value is used in mesh STA to retransmit
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -768,6 +768,7 @@ static void wpa_config_write_network(FIL
- #endif /* IEEE8021X_EAPOL */
- 	INT(mode);
- 	INT(no_auto_peer);
-+	INT(mesh_fwding);
- 	INT(frequency);
- 	INT(enable_edmg);
- 	INT(edmg_channel);
-@@ -1449,6 +1450,9 @@ static void wpa_config_write_global(FILE
- 		fprintf(f, "mesh_max_inactivity=%d\n",
- 			config->mesh_max_inactivity);
- 
-+	if (config->mesh_fwding != DEFAULT_MESH_FWDING)
-+		fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
-+
- 	if (config->dot11RSNASAERetransPeriod !=
- 	    DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
- 		fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -546,6 +546,11 @@ struct wpa_ssid {
- 	int dot11MeshConfirmTimeout; /* msec */
- 	int dot11MeshHoldingTimeout; /* msec */
- 
-+	/**
-+	 * Mesh network layer-2 forwarding
-+	 */
-+	int mesh_fwding;
-+
- 	int ht;
- 	int ht40;
- 
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -140,6 +140,7 @@ static struct mesh_conf * mesh_config_cr
- 	conf->mesh_cc_id = 0;
- 	conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
- 	conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
-+	conf->mesh_fwding = ssid->mesh_fwding;
- 	conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
- 	conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
- 	conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
-@@ -441,6 +442,7 @@ static int wpa_supplicant_mesh_init(stru
- 	bss->conf->start_disabled = 1;
- 	bss->conf->mesh = MESH_ENABLED;
- 	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
-+	bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
- 
- 	if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
- 			     wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
-@@ -655,6 +657,10 @@ int wpa_supplicant_join_mesh(struct wpa_
- 	}
- 	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
- 
-+	/* always explicitely set forwarding to on or off for now */
-+	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
-+	params->conf.forwarding = ssid->mesh_fwding;
-+
- 	os_free(wpa_s->mesh_params);
- 	wpa_s->mesh_params = params;
- 	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
---- a/wpa_supplicant/mesh_mpm.c
-+++ b/wpa_supplicant/mesh_mpm.c
-@@ -303,9 +303,9 @@ static void mesh_mpm_send_plink_action(s
- 		info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
- 		/* TODO: Add Connected to Mesh Gate/AS subfields */
- 		wpabuf_put_u8(buf, info);
--		/* always forwarding & accepting plinks for now */
-+		/* set forwarding & always accepting plinks for now */
- 		wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
--			      MESH_CAP_FORWARDING);
-+			      (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
- 	} else {	/* Peer closing frame */
- 		/* IE: Mesh ID */
- 		wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -150,6 +150,9 @@ ap_scan=1
- # This timeout value is used in mesh STA to clean up inactive stations.
- #mesh_max_inactivity=300
- 
-+# Enable 802.11s layer-2 routing and forwarding
-+#mesh_fwding=1
-+
- # cert_in_cb - Whether to include a peer certificate dump in events
- # This controls whether peer certificates for authentication server and
- # its certificate chain are included in EAP peer certificate events. This is
diff --git a/package/network/services/hostapd/patches/301-mesh-noscan.patch b/package/network/services/hostapd/patches/301-mesh-noscan.patch
index 0d78329441..e593ac49fe 100644
--- a/package/network/services/hostapd/patches/301-mesh-noscan.patch
+++ b/package/network/services/hostapd/patches/301-mesh-noscan.patch
@@ -10,7 +10,7 @@
  	{ STR(id_str) },
 --- a/wpa_supplicant/config_file.c
 +++ b/wpa_supplicant/config_file.c
-@@ -768,6 +768,7 @@ static void wpa_config_write_network(FIL
+@@ -769,6 +769,7 @@ static void wpa_config_write_network(FIL
  #endif /* IEEE8021X_EAPOL */
  	INT(mode);
  	INT(no_auto_peer);
@@ -20,7 +20,7 @@
  	INT(enable_edmg);
 --- a/wpa_supplicant/mesh.c
 +++ b/wpa_supplicant/mesh.c
-@@ -474,6 +474,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -506,6 +506,8 @@ static int wpa_supplicant_mesh_init(stru
  			   frequency);
  		goto out_free;
  	}
@@ -31,14 +31,17 @@
  		/*
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2384,12 +2384,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2436,7 +2436,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
  	int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
  	enum hostapd_hw_mode hw_mode;
  	struct hostapd_hw_modes *mode = NULL;
 -	int ht40plus[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
 +	int ht40plus[] = { 1, 2, 3, 4, 5, 6, 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
  			   184, 192 };
- 	int vht80[] = { 36, 52, 100, 116, 132, 149 };
+ 	int bw80[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955,
+ 		       6035, 6115, 6195, 6275, 6355, 6435, 6515,
+@@ -2444,7 +2444,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	int bw160[] = { 5955, 6115, 6275, 6435, 6595, 6755, 6915 };
  	struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
  	u8 channel;
 -	int i, chan_idx, ht40 = -1, res, obss_scan = 1;
@@ -46,7 +49,7 @@
  	unsigned int j, k;
  	struct hostapd_freq_params vht_freq;
  	int chwidth, seg0, seg1;
-@@ -2473,7 +2473,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2535,7 +2535,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
  #endif /* CONFIG_HE_OVERRIDES */
  
  	/* Setup higher BW only for 5 GHz */
@@ -57,7 +60,7 @@
  	for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
 --- a/wpa_supplicant/config_ssid.h
 +++ b/wpa_supplicant/config_ssid.h
-@@ -971,6 +971,8 @@ struct wpa_ssid {
+@@ -979,6 +979,8 @@ struct wpa_ssid {
  	 */
  	int no_auto_peer;
  
diff --git a/package/network/services/hostapd/patches/470-survey_data_fallback.patch b/package/network/services/hostapd/patches/470-survey_data_fallback.patch
index efd82599d3..359b5f3ef8 100644
--- a/package/network/services/hostapd/patches/470-survey_data_fallback.patch
+++ b/package/network/services/hostapd/patches/470-survey_data_fallback.patch
@@ -1,26 +1,6 @@
 --- a/src/ap/acs.c
 +++ b/src/ap/acs.c
-@@ -302,18 +302,12 @@ static void acs_fail(struct hostapd_ifac
- static long double
- acs_survey_interference_factor(struct freq_survey *survey, s8 min_nf)
- {
--	long double factor, busy, total;
-+	long double factor, busy = 0, total;
- 
- 	if (survey->filled & SURVEY_HAS_CHAN_TIME_BUSY)
- 		busy = survey->channel_time_busy;
- 	else if (survey->filled & SURVEY_HAS_CHAN_TIME_RX)
- 		busy = survey->channel_time_rx;
--	else {
--		/* This shouldn't really happen as survey data is checked in
--		 * acs_sanity_check() */
--		wpa_printf(MSG_ERROR, "ACS: Survey data missing");
--		return 0;
--	}
- 
- 	total = survey->channel_time;
- 
-@@ -422,20 +416,19 @@ static int acs_usable_bw160_chan(const s
+@@ -420,20 +420,19 @@ static int acs_usable_bw160_chan(const s
  static int acs_survey_is_sufficient(struct freq_survey *survey)
  {
  	if (!(survey->filled & SURVEY_HAS_NF)) {
diff --git a/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch b/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch
deleted file mode 100644
index 6c080adc0e..0000000000
--- a/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From 1b26807938815d0b0b266caf31d8ef0019607e64 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 27 Sep 2021 15:41:48 +0200
-Subject: [PATCH] WNM: allow specifying dialog-token
-
-This commit adds the ability to specify the dialog token of a WNM BSS
-Transition request frame via the hostapd control socket.
-
-FOr this, the new 'dialog_token' option can be used. It accepts values
-as a 8 bit unsigned integer. If not specified, the dialog token is set
-to 1 like before.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- hostapd/ctrl_iface.c | 10 ++++++++--
- src/ap/wnm_ap.c      | 11 ++++++-----
- src/ap/wnm_ap.h      |  4 ++--
- 3 files changed, 16 insertions(+), 9 deletions(-)
-
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -897,7 +897,7 @@ static int hostapd_ctrl_iface_bss_tm_req
- 	const char *pos, *end;
- 	int disassoc_timer = 0;
- 	struct sta_info *sta;
--	u8 req_mode = 0, valid_int = 0x01;
-+	u8 req_mode = 0, valid_int = 0x01, dialog_token = 0x01;
- 	u8 bss_term_dur[12];
- 	char *url = NULL;
- 	int ret;
-@@ -935,6 +935,12 @@ static int hostapd_ctrl_iface_bss_tm_req
- 		valid_int = atoi(pos);
- 	}
- 
-+	pos = os_strstr(cmd, " dialog_token=");
-+	if (pos) {
-+		pos += 14;
-+		dialog_token = atoi(pos);
-+	}
-+
- 	pos = os_strstr(cmd, " bss_term=");
- 	if (pos) {
- 		pos += 10;
-@@ -1041,7 +1047,7 @@ static int hostapd_ctrl_iface_bss_tm_req
- #endif /* CONFIG_MBO */
- 
- 	ret = wnm_send_bss_tm_req(hapd, sta, req_mode, disassoc_timer,
--				  valid_int, bss_term_dur, url,
-+				  valid_int, bss_term_dur, dialog_token, url,
- 				  nei_len ? nei_rep : NULL, nei_len,
- 				  mbo_len ? mbo : NULL, mbo_len);
- #ifdef CONFIG_MBO
---- a/src/ap/wnm_ap.c
-+++ b/src/ap/wnm_ap.c
-@@ -788,8 +788,8 @@ int wnm_send_ess_disassoc_imminent(struc
- 
- int wnm_send_bss_tm_req(struct hostapd_data *hapd, struct sta_info *sta,
- 			u8 req_mode, int disassoc_timer, u8 valid_int,
--			const u8 *bss_term_dur, const char *url,
--			const u8 *nei_rep, size_t nei_rep_len,
-+			const u8 *bss_term_dur, u8 dialog_token,
-+			const char *url, const u8 *nei_rep, size_t nei_rep_len,
- 			const u8 *mbo_attrs, size_t mbo_len)
- {
- 	u8 *buf, *pos;
-@@ -797,8 +797,9 @@ int wnm_send_bss_tm_req(struct hostapd_d
- 	size_t url_len;
- 
- 	wpa_printf(MSG_DEBUG, "WNM: Send BSS Transition Management Request to "
--		   MACSTR " req_mode=0x%x disassoc_timer=%d valid_int=0x%x",
--		   MAC2STR(sta->addr), req_mode, disassoc_timer, valid_int);
-+		   MACSTR " req_mode=0x%x disassoc_timer=%d valid_int=0x%x "
-+		   "dialog_token=%x",
-+		   MAC2STR(sta->addr), req_mode, disassoc_timer, valid_int, dialog_token);
- 	buf = os_zalloc(1000 + nei_rep_len + mbo_len);
- 	if (buf == NULL)
- 		return -1;
-@@ -810,7 +811,7 @@ int wnm_send_bss_tm_req(struct hostapd_d
- 	os_memcpy(mgmt->bssid, hapd->own_addr, ETH_ALEN);
- 	mgmt->u.action.category = WLAN_ACTION_WNM;
- 	mgmt->u.action.u.bss_tm_req.action = WNM_BSS_TRANS_MGMT_REQ;
--	mgmt->u.action.u.bss_tm_req.dialog_token = 1;
-+	mgmt->u.action.u.bss_tm_req.dialog_token = dialog_token;
- 	mgmt->u.action.u.bss_tm_req.req_mode = req_mode;
- 	mgmt->u.action.u.bss_tm_req.disassoc_timer =
- 		host_to_le16(disassoc_timer);
---- a/src/ap/wnm_ap.h
-+++ b/src/ap/wnm_ap.h
-@@ -20,8 +20,8 @@ int wnm_send_ess_disassoc_imminent(struc
- 				   int disassoc_timer);
- int wnm_send_bss_tm_req(struct hostapd_data *hapd, struct sta_info *sta,
- 			u8 req_mode, int disassoc_timer, u8 valid_int,
--			const u8 *bss_term_dur, const char *url,
--			const u8 *nei_rep, size_t nei_rep_len,
-+			const u8 *bss_term_dur, u8 dialog_token,
-+			const char *url, const u8 *nei_rep, size_t nei_rep_len,
- 			const u8 *mbo_attrs, size_t mbo_len);
- void ap_sta_reset_steer_flag_timer(void *eloop_ctx, void *timeout_ctx);
- int wnm_send_coloc_intf_req(struct hostapd_data *hapd, struct sta_info *sta,
diff --git a/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch b/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch
deleted file mode 100644
index 3ef19e5298..0000000000
--- a/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 5a24286ed6315e1fef755ca1970792554f59b1fc Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Wed, 26 May 2021 22:15:35 +0200
-Subject: [PATCH] ACS: fix channel 100 frequency
-
-Channel 100 is a valid channel to choose for 80MHz operation. However,
-it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel
-assigned to this frequency.
-
-Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz
-operation again.
-
-Fixes commit bef5eee4f7b2 ("Convert channel to frequency based selection for AP mode ACS")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- src/ap/acs.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/src/ap/acs.c
-+++ b/src/ap/acs.c
-@@ -386,7 +386,7 @@ static int acs_usable_bw40_chan(const st
- 
- static int acs_usable_bw80_chan(const struct hostapd_channel_data *chan)
- {
--	const int allowed[] = { 5180, 5260, 5550, 5580, 5660, 5745, 5955, 6035,
-+	const int allowed[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955, 6035,
- 				6115, 6195, 6275, 6355, 6435, 6515, 6595, 6675,
- 				6755, 6835, 6915, 6995 };
- 	unsigned int i;
diff --git a/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch b/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch
deleted file mode 100644
index 657ef5f2ed..0000000000
--- a/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From ad694836b2ded6b97b426bf331627537cdbff591 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 19 Aug 2021 00:52:04 +0200
-Subject: [PATCH] proxyarp: fix compilation with Hotspot 2.0 disabled
-
-The disable_dgaf config fiels is only available in case Hostapd is
-compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on
-Hotspot 2.0.
-
-Only add the code related to this config field when Hotspot 2.0 is
-enabled to fix compilation with the aformentioned preconditions.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- src/ap/dhcp_snoop.c  | 2 ++
- src/ap/ndisc_snoop.c | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/src/ap/dhcp_snoop.c
-+++ b/src/ap/dhcp_snoop.c
-@@ -88,6 +88,7 @@ static void handle_dhcp(void *ctx, const
- 		}
- 	}
- 
-+#ifdef CONFIG_HS20
- 	if (hapd->conf->disable_dgaf && is_broadcast_ether_addr(buf)) {
- 		for (sta = hapd->sta_list; sta; sta = sta->next) {
- 			if (!(sta->flags & WLAN_STA_AUTHORIZED))
-@@ -96,6 +97,7 @@ static void handle_dhcp(void *ctx, const
- 							    (u8 *) buf, len);
- 		}
- 	}
-+#endif
- 
- 	if (msgtype == DHCPACK) {
- 		if (b->your_ip == 0)
---- a/src/ap/ndisc_snoop.c
-+++ b/src/ap/ndisc_snoop.c
-@@ -151,10 +151,12 @@ static void handle_ndisc(void *ctx, cons
- 				return;
- 		}
- 		break;
-+#ifdef CONFIG_HS20
- 	case ROUTER_ADVERTISEMENT:
- 		if (hapd->conf->disable_dgaf)
- 			ucast_to_stas(hapd, buf, len);
- 		break;
-+#endif
- 	case NEIGHBOR_ADVERTISEMENT:
- 		if (hapd->conf->na_mcast_to_ucast)
- 			ucast_to_stas(hapd, buf, len);