hostapd: update to 2023-03-29

Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch

Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch

Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch

Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch

Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
           EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>

1 files changed, 58 insertions, 29 deletions

diff --git a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
index 6bc48abfb9..761fe368cd 100644
--- a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
+++ b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
@@ -14,7 +14,7 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
 
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2436,7 +2436,7 @@ static int drv_supports_vht(struct wpa_s
+@@ -2621,7 +2621,7 @@ static int drv_supports_vht(struct wpa_s
  }
  
  
@@ -23,7 +23,7 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  {
  	int i;
  
-@@ -2445,7 +2445,10 @@ static bool ibss_mesh_is_80mhz_avail(int
+@@ -2630,7 +2630,10 @@ static bool ibss_mesh_is_80mhz_avail(int
  
  		chan = hw_get_channel_chan(mode, i, NULL);
  		if (!chan ||
@@ -35,16 +35,16 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  			return false;
  	}
  
-@@ -2474,6 +2477,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
- 	int chwidth, seg0, seg1;
- 	u32 vht_caps = 0;
- 	bool is_24ghz, is_6ghz;
-+	bool dfs_enabled = wpa_s->conf->country[0] &&
-+			   (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
- 
- 	freq->freq = ssid->frequency;
- 
-@@ -2570,8 +2575,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2757,7 +2760,7 @@ static void ibss_mesh_select_40mhz(struc
+ 				   const struct wpa_ssid *ssid,
+ 				   struct hostapd_hw_modes *mode,
+ 				   struct hostapd_freq_params *freq,
+-				   int obss_scan) {
++				   int obss_scan, bool dfs_enabled) {
+ 	int chan_idx;
+ 	struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
+ 	int i, res;
+@@ -2781,8 +2784,11 @@ static void ibss_mesh_select_40mhz(struc
  		return;
  
  	/* Check primary channel flags */
@@ -55,9 +55,9 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
 +		if (!dfs_enabled)
 +			return;
  
- 	freq->channel = pri_chan->chan;
- 
-@@ -2604,8 +2612,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ #ifdef CONFIG_HT_OVERRIDES
+ 	if (ssid->disable_ht40)
+@@ -2808,8 +2814,11 @@ static void ibss_mesh_select_40mhz(struc
  		return;
  
  	/* Check secondary channel flags */
@@ -70,25 +70,34 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  
  	if (ht40 == -1) {
  		if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
-@@ -2694,7 +2705,7 @@ skip_to_6ghz:
- 		return;
- 
- 	/* Back to HT configuration if channel not usable */
+@@ -2863,7 +2872,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 				       const struct wpa_ssid *ssid,
+ 				       struct hostapd_hw_modes *mode,
+ 				       struct hostapd_freq_params *freq,
+-				       int ieee80211_mode, bool is_6ghz) {
++				       int ieee80211_mode, bool is_6ghz, bool dfs_enabled) {
+ 	static const int bw80[] = {
+ 		5180, 5260, 5500, 5580, 5660, 5745, 5825,
+ 		5955, 6035, 6115, 6195, 6275, 6355, 6435,
+@@ -2908,7 +2917,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 		goto skip_80mhz;
+ 
+ 	/* Use 40 MHz if channel not usable */
 -	if (!ibss_mesh_is_80mhz_avail(channel, mode))
 +	if (!ibss_mesh_is_80mhz_avail(channel, mode, dfs_enabled))
- 		return;
+ 		goto skip_80mhz;
  
  	chwidth = CONF_OPER_CHWIDTH_80MHZ;
-@@ -2708,7 +2719,7 @@ skip_to_6ghz:
- 		 * above; check the remaining four 20 MHz channels for the total
- 		 * of 160 MHz bandwidth.
- 		 */
--		if (!ibss_mesh_is_80mhz_avail(channel + 16, mode))
-+		if (!ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled))
- 			return;
- 
+@@ -2922,7 +2931,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 	if ((mode->he_capab[ieee80211_mode].phy_cap[
+ 		     HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] &
+ 	     HE_PHYCAP_CHANNEL_WIDTH_SET_160MHZ_IN_5G) && is_6ghz &&
+-	    ibss_mesh_is_80mhz_avail(channel + 16, mode)) {
++	    ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled)) {
  		for (j = 0; j < ARRAY_SIZE(bw160); j++) {
-@@ -2738,10 +2749,12 @@ skip_to_6ghz:
+ 			if (freq->freq == bw160[j]) {
+ 				chwidth = CONF_OPER_CHWIDTH_160MHZ;
+@@ -2950,10 +2959,12 @@ static bool ibss_mesh_select_80_160mhz(s
  				if (!chan)
  					continue;
  
@@ -104,3 +113,23 @@ Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  
  				/* Found a suitable second segment for 80+80 */
  				chwidth = CONF_OPER_CHWIDTH_80P80MHZ;
+@@ -3008,6 +3019,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	int i, obss_scan = 1;
+ 	u8 channel;
+ 	bool is_6ghz;
++	bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
+ 
+ 	freq->freq = ssid->frequency;
+ 
+@@ -3053,9 +3065,9 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	freq->channel = channel;
+ 	/* Setup higher BW only for 5 GHz */
+ 	if (mode->mode == HOSTAPD_MODE_IEEE80211A) {
+-		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan);
++		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled);
+ 		if (!ibss_mesh_select_80_160mhz(wpa_s, ssid, mode, freq,
+-						ieee80211_mode, is_6ghz))
++						ieee80211_mode, is_6ghz, dfs_enabled))
+ 			freq->he_enabled = freq->vht_enabled = false;
+ 	}
+