madwifi: clean up tx status mrr handling and fix mrr parsing for 5416

SVN-Revision: 15757

1 files changed, 507 insertions, 0 deletions

diff --git a/package/madwifi/patches/425-rc_rexmit.patch b/package/madwifi/patches/425-rc_rexmit.patch
new file mode 100644
index 0000000000..6b06a85027
--- /dev/null
+++ b/package/madwifi/patches/425-rc_rexmit.patch
@@ -0,0 +1,507 @@
+--- a/net80211/ieee80211_rate.h
++++ b/net80211/ieee80211_rate.h
+@@ -81,6 +81,8 @@ struct ieee80211vap;
+ 
+ /* Multi-rare retry: 3 additional rate/retry pairs */
+ struct ieee80211_mrr {
++	int rate0;
++	int retries0;
+ 	int rate1;
+ 	int retries1;
+ 	int rate2;
+@@ -142,7 +144,7 @@ struct ieee80211_rate_ops {
+ 	 * for packets that were successfully sent and for those that
+ 	 * failed (consult the descriptor for details). */
+ 	void (*tx_complete)(struct ath_softc *sc, struct ath_node *an,
+-			    const struct ath_buf *bf);
++			    const struct ath_buf *bf, const struct ieee80211_mrr *mrr);
+ };
+ 
+ struct ath_ratectrl {
+--- a/ath/if_ath.c
++++ b/ath/if_ath.c
+@@ -8634,6 +8634,8 @@ ath_tx_processq(struct ath_softc *sc, st
+ 
+ 		ni = bf->bf_node;
+ 		if (ni != NULL) {
++			struct ieee80211_mrr mrr;
++
+ 			an = ATH_NODE(ni);
+ 			if (ts->ts_status == 0) {
+ 				u_int8_t txant = ts->ts_antenna;
+@@ -8686,15 +8688,43 @@ ath_tx_processq(struct ath_softc *sc, st
+ 			lr = ts->ts_longretry;
+ 			sc->sc_stats.ast_tx_shortretry += sr;
+ 			sc->sc_stats.ast_tx_longretry += lr;
++			memset(&mrr, 0, sizeof(mrr));
++
++			switch(ah->ah_macType) {
++			case 5210:
++			case 5211:
++				goto skip_mrr;
++
++			case 5212:
++				mrr.rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
++				mrr.rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
++				mrr.rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
++				mrr.rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
++				break;
++
++			case 5416:
++				mrr.rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate0)].ieeerate;
++				mrr.rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate1)].ieeerate;
++				mrr.rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate2)].ieeerate;
++				mrr.rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR5416_XmitRate3)].ieeerate;
++				break;
++			}
++
++			mrr.retries0 = MS(ds->ds_ctl2, AR_XmitDataTries0);
++			mrr.retries1 = MS(ds->ds_ctl2, AR_XmitDataTries1);
++			mrr.retries2 = MS(ds->ds_ctl2, AR_XmitDataTries2);
++			mrr.retries3 = MS(ds->ds_ctl2, AR_XmitDataTries3);
++
+ 			/*
+ 			 * Hand the descriptor to the rate control algorithm
+ 			 * if the frame wasn't dropped for filtering or sent
+ 			 * w/o waiting for an ack.  In those cases the rssi
+ 			 * and retry counts will be meaningless.
+ 			 */
++skip_mrr:
+ 			if ((ts->ts_status & HAL_TXERR_FILT) == 0 &&
+ 			    (bf->bf_flags & HAL_TXDESC_NOACK) == 0)
+-				sc->sc_rc->ops->tx_complete(sc, an, bf);
++				sc->sc_rc->ops->tx_complete(sc, an, bf, &mrr);
+ 		}
+ 
+ 		bus_unmap_single(sc->sc_bdev, bf->bf_skbaddr,
+--- a/ath/if_athvar.h
++++ b/ath/if_athvar.h
+@@ -595,6 +595,46 @@ struct ath_vap {
+ 	(_tqs)->axq_link = NULL; \
+ } while (0)
+ 
++/*
++ * Definitions for pulling the rate and trie counts from
++ * a 5212 h/w descriptor. These Don't belong here; the
++ * driver should record this information so the rate control
++ * code doesn't go groveling around in the descriptor bits.
++ */
++#define	ds_ctl2	ds_hw[0]
++#define	ds_ctl3	ds_hw[1]
++
++/* TX ds_ctl3 */
++#define	AR_XmitDataTries0	0x000f0000	/* series 0 max attempts */
++#define	AR_XmitDataTries0_S	16
++#define	AR_XmitDataTries1	0x00f00000	/* series 1 max attempts */
++#define	AR_XmitDataTries1_S	20
++#define	AR_XmitDataTries2	0x0f000000	/* series 2 max attempts */
++#define	AR_XmitDataTries2_S	24
++#define	AR_XmitDataTries3	0xf0000000	/* series 3 max attempts */
++#define	AR_XmitDataTries3_S	28
++
++/* TX ds_ctl3 */
++#define	AR_XmitRate0		0x0000001f	/* series 0 tx rate */
++#define	AR_XmitRate0_S		0
++#define	AR_XmitRate1		0x000003e0	/* series 1 tx rate */
++#define	AR_XmitRate1_S		5
++#define	AR_XmitRate2		0x00007c00	/* series 2 tx rate */
++#define	AR_XmitRate2_S		10
++#define	AR_XmitRate3		0x000f8000	/* series 3 tx rate */
++#define	AR_XmitRate3_S		15
++
++#define AR5416_XmitRate0        0x000000ff
++#define AR5416_XmitRate0_S      0
++#define AR5416_XmitRate1        0x0000ff00
++#define AR5416_XmitRate1_S      8
++#define AR5416_XmitRate2        0x00ff0000
++#define AR5416_XmitRate2_S      16
++#define AR5416_XmitRate3        0xff000000
++#define AR5416_XmitRate3_S      24
++
++#define MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
++
+ /* 
+  * concat buffers from one queue to other
+  */
+--- a/ath_rate/amrr/amrr.c
++++ b/ath_rate/amrr/amrr.c
+@@ -123,7 +123,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+ 
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+-	struct ath_node *an, const struct ath_buf *bf)
++	struct ath_node *an, const struct ath_buf *bf,
++	const struct ieee80211_mrr *mrr)
+ {
+ 	struct amrr_node *amn = ATH_NODE_AMRR(an);
+ 	const struct ath_tx_status *ts = &bf->bf_dsstatus.ds_txstat;
+--- a/ath_rate/minstrel/minstrel.c
++++ b/ath_rate/minstrel/minstrel.c
+@@ -333,7 +333,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+ 
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+-		struct ath_node *an, const struct ath_buf *bf)
++		struct ath_node *an, const struct ath_buf *bf,
++		const struct ieee80211_mrr *mrr)
+ {
+ 		struct minstrel_node *sn = ATH_NODE_MINSTREL(an);
+ 		struct ieee80211com *ic = &sc->sc_ic;
+@@ -341,12 +342,9 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		const struct ath_desc *ds = &bf->bf_desc[0];
+ 		int final_rate = 0;
+ 		int tries = 0;
+-		int mrr;
++		int use_mrr;
+ 		int final_ndx;
+-		int rate0, tries0, ndx0;
+-		int rate1, tries1, ndx1;
+-		int rate2, tries2, ndx2;
+-		int rate3, tries3, ndx3;
++		int ndx0, ndx1, ndx2, ndx3;
+ 
+ 		/* This is the index in the retry chain we finish at.
+ 		 * With no retransmits, it is always 0.
+@@ -376,9 +374,9 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		if (!ts->ts_status)  /* Success when sending a packet*/
+ 			sn->rs_ratesuccess[final_ndx]++;
+ 
+-		mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
++		use_mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+ 
+-		if (!mrr) {
++		if (!use_mrr) {
+ 			if ((0 <= final_ndx) && (final_ndx < sn->num_rates)) {
+ 				sn->rs_rateattempts[final_ndx] += tries; /* only one rate was used */
+ 			}
+@@ -388,47 +386,36 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		/* Now, query the hal/hardware to find out the contents of the multirate retry chain.
+ 		 * If we have it set to 6,3,2,2, this call will always return 6,3,2,2. For some packets, we can
+ 		 * get a mrr of 0, -1, -1, -1, which indicates there is no chain installed for that packet */
+-		rate0 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
+-		tries0 = MS(ds->ds_ctl2, AR_XmitDataTries0);
+-		ndx0 = rate_to_ndx(sn, rate0);
++		ndx0 = rate_to_ndx(sn, mrr->rate0);
++		ndx1 = rate_to_ndx(sn, mrr->rate1);
++		ndx2 = rate_to_ndx(sn, mrr->rate2);
++		ndx3 = rate_to_ndx(sn, mrr->rate3);
+ 
+-		rate1 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
+-		tries1 = MS(ds->ds_ctl2, AR_XmitDataTries1);
+-		ndx1 = rate_to_ndx(sn, rate1);
+-
+-		rate2 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
+-		tries2 = MS(ds->ds_ctl2, AR_XmitDataTries2);
+-		ndx2 = rate_to_ndx(sn, rate2);
+-
+-		rate3 = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
+-		tries3 = MS(ds->ds_ctl2, AR_XmitDataTries3);
+-		ndx3 = rate_to_ndx(sn, rate3);
+-
+-		sn->rs_rateattempts[ndx0] += MIN(tries, tries0);
+-		if (tries <= tries0)
++		sn->rs_rateattempts[ndx0] += MIN(tries, mrr->retries0);
++		if (tries <= mrr->retries0)
+ 			return;
+ 
+-		if (tries1 < 0)
++		if (mrr->retries1 < 0)
+ 			return;
+-		tries = tries - tries0;
+-		sn->rs_rateattempts[ndx1] += MIN(tries, tries1);
+-		if (tries <= tries1)
++		tries = tries - mrr->retries0;
++		sn->rs_rateattempts[ndx1] += MIN(tries, mrr->retries1);
++		if (tries <= mrr->retries1)
+ 			return;
+ 
+ 		if (bf->rcflags)
+ 			sn->sample_count++;
+ 
+-		if  (tries2 < 0)
++		if (mrr->retries2 < 0)
+ 			return;
+-		tries = tries - tries1;
+-		sn->rs_rateattempts[ndx2] += MIN(tries, tries2);
+-		if (tries <= tries2)
++		tries = tries - mrr->retries1;
++		sn->rs_rateattempts[ndx2] += MIN(tries, mrr->retries2);
++		if (tries <= mrr->retries2)
+ 			return;
+ 
+-		if  (tries3 < 0)
++		if (mrr->retries3 < 0)
+ 			return;
+-		tries = tries - tries2;
+-		sn->rs_rateattempts[ndx3] += MIN(tries, tries3);
++		tries = tries - mrr->retries2;
++		sn->rs_rateattempts[ndx3] += MIN(tries, mrr->retries3);
+ }
+ 
+ static void
+--- a/ath_rate/minstrel/minstrel.h
++++ b/ath_rate/minstrel/minstrel.h
+@@ -171,36 +171,6 @@ struct minstrel_node {
+ 
+ #define	ATH_NODE_MINSTREL(an)	((struct minstrel_node *)&an[1])
+ 
+-/*
+- * Definitions for pulling the rate and trie counts from
+- * a 5212 h/w descriptor. These Don't belong here; the
+- * driver should record this information so the rate control
+- * code doesn't go groveling around in the descriptor bits.
+- */
+-#define	ds_ctl2	ds_hw[0]
+-#define	ds_ctl3	ds_hw[1]
+-
+-/* TX ds_ctl3 */
+-#define	AR_XmitDataTries0	0x000f0000	/* series 0 max attempts */
+-#define	AR_XmitDataTries0_S	16
+-#define	AR_XmitDataTries1	0x00f00000	/* series 1 max attempts */
+-#define	AR_XmitDataTries1_S	20
+-#define	AR_XmitDataTries2	0x0f000000	/* series 2 max attempts */
+-#define	AR_XmitDataTries2_S	24
+-#define	AR_XmitDataTries3	0xf0000000	/* series 3 max attempts */
+-#define	AR_XmitDataTries3_S	28
+-
+-/* TX ds_ctl3 */
+-#define	AR_XmitRate0		0x0000001f	/* series 0 tx rate */
+-#define	AR_XmitRate0_S		0
+-#define	AR_XmitRate1		0x000003e0	/* series 1 tx rate */
+-#define	AR_XmitRate1_S		5
+-#define	AR_XmitRate2		0x00007c00	/* series 2 tx rate */
+-#define	AR_XmitRate2_S		10
+-#define	AR_XmitRate3		0x000f8000	/* series 3 tx rate */
+-#define	AR_XmitRate3_S		15
+-
+-#define MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
+ #endif /* _DEV_ATH_RATE_MINSTEL_H */
+ 
+ /* The comment below is magic for those who use emacs to edit this file. */
+--- a/ath_rate/onoe/onoe.c
++++ b/ath_rate/onoe/onoe.c
+@@ -137,7 +137,8 @@ ath_rate_get_mrr(struct ath_softc *sc, s
+ 
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+-	struct ath_node *an, const struct ath_buf *bf)
++	struct ath_node *an, const struct ath_buf *bf,
++	const struct ieee80211_mrr *mrr)
+ {
+ 	struct onoe_node *on = ATH_NODE_ONOE(an);
+ 	const struct ath_tx_status *ts = &bf->bf_dsstatus.ds_txstat;
+--- a/ath_rate/sample/sample.c
++++ b/ath_rate/sample/sample.c
+@@ -178,10 +178,6 @@ static __inline int best_rate_ndx(struct
+ 		    !sn->stats[size_bin][x].packets_acked))
+ 			continue;
+ 
+-		/* 9 megabits never works better than 12 */
+-		if (sn->rates[x].rate == 18)
+-			continue;
+-
+ 		/* don't use a bit-rate that has been failing */
+ 		if (sn->stats[size_bin][x].successive_failures > 3)
+ 			continue;
+@@ -234,10 +230,6 @@ pick_sample_ndx(struct sample_node *sn, 
+ 		if (sn->rates[ndx].rate > 22 && ndx > current_ndx + 2)
+ 			continue;
+ 
+-		/* 9 megabits never works better than 12 */
+-		if (sn->rates[ndx].rate == 18)
+-			continue;
+-
+ 		/* if we're using 11 megabits, only sample up to 12 megabits
+ 		 */
+ 		if (sn->rates[current_ndx].rate == 22 && ndx > current_ndx + 1)
+@@ -531,7 +523,8 @@ update_stats(struct ath_softc *sc, struc
+ 
+ static void
+ ath_rate_tx_complete(struct ath_softc *sc,
+-	struct ath_node *an, const struct ath_buf *bf)
++	struct ath_node *an, const struct ath_buf *bf,
++	const struct ieee80211_mrr *mrr)
+ {
+ 	struct sample_node *sn = ATH_NODE_SAMPLE(an);
+ 	struct ieee80211com *ic = &sc->sc_ic;
+@@ -541,7 +534,7 @@ ath_rate_tx_complete(struct ath_softc *s
+ 	unsigned int short_tries;
+ 	unsigned int long_tries;
+ 	unsigned int frame_size;
+-	unsigned int mrr;
++	unsigned int use_mrr;
+ 
+ 	final_rate = sc->sc_hwmap[ts->ts_rate &~ HAL_TXSTAT_ALTRATE].ieeerate;
+ 	short_tries = ts->ts_shortretry + 1;
+@@ -557,7 +550,7 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		return;
+ 	}
+ 
+-	mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
++	use_mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+ 
+ 
+ 	if (sc->sc_mrretry && ts->ts_status) {
+@@ -566,22 +559,15 @@ ath_rate_tx_complete(struct ath_softc *s
+ 			dev_info,
+ 			MAC_ADDR(an->an_node.ni_macaddr),
+ 			bin_to_size(size_to_bin(frame_size)),
+-			sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate,
+-				MS(ds->ds_ctl2, AR_XmitDataTries0),
+-			sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate,
+-				MS(ds->ds_ctl2, AR_XmitDataTries1),
+-			sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate,
+-				MS(ds->ds_ctl2, AR_XmitDataTries2),
+-			sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate,
+-				MS(ds->ds_ctl2, AR_XmitDataTries3),
++			mrr->rate0,
++			mrr->rate1,
++			mrr->rate2,
++			mrr->rate3,
+ 			ts->ts_status ? "FAIL" : "OK",
+ 			short_tries, long_tries);
+ 	}
+ 
+-	mrr = sc->sc_mrretry && !(ic->ic_flags & IEEE80211_F_USEPROT) && ENABLE_MRR;
+-
+-
+-	if (!mrr || !(ts->ts_rate & HAL_TXSTAT_ALTRATE)) {
++	if (!use_mrr || !(ts->ts_rate & HAL_TXSTAT_ALTRATE)) {
+ 		/* only one rate was used */
+ 		int ndx = rate_to_ndx(sn, final_rate);
+ 		if ((ndx >= 0) && (ndx < sn->num_rates)) {
+@@ -593,7 +579,6 @@ ath_rate_tx_complete(struct ath_softc *s
+ 				short_tries, long_tries, ts->ts_status);
+ 		}
+ 	} else {
+-		unsigned int rate[4], tries[4];
+ 		int ndx[4];
+ 		int finalTSIdx = ts->ts_finaltsi;
+ 
+@@ -601,21 +586,10 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		 * Process intermediate rates that failed.
+ 		 */
+ 
+-		rate[0] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate0)].ieeerate;
+-		tries[0] = MS(ds->ds_ctl2, AR_XmitDataTries0);
+-		ndx[0] = rate_to_ndx(sn, rate[0]);
+-
+-		rate[1] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate1)].ieeerate;
+-		tries[1] = MS(ds->ds_ctl2, AR_XmitDataTries1);
+-		ndx[1] = rate_to_ndx(sn, rate[1]);
+-
+-		rate[2] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate2)].ieeerate;
+-		tries[2] = MS(ds->ds_ctl2, AR_XmitDataTries2);
+-		ndx[2] = rate_to_ndx(sn, rate[2]);
+-
+-		rate[3] = sc->sc_hwmap[MS(ds->ds_ctl3, AR_XmitRate3)].ieeerate;
+-		tries[3] = MS(ds->ds_ctl2, AR_XmitDataTries3);
+-		ndx[3] = rate_to_ndx(sn, rate[3]);
++		ndx[0] = rate_to_ndx(sn, mrr->rate0);
++		ndx[1] = rate_to_ndx(sn, mrr->rate1);
++		ndx[2] = rate_to_ndx(sn, mrr->rate2);
++		ndx[3] = rate_to_ndx(sn, mrr->rate3);
+ 
+ #if 0
+ 		DPRINTF(sc, ATH_DEBUG_RATE, "%s: " MAC_FMT " size %u finaltsidx %u tries %u status %u rate/try %u/%u %u/%u %u/%u %u/%u\n",
+@@ -636,43 +610,43 @@ ath_rate_tx_complete(struct ath_softc *s
+ 		 * sample higher rates 1 try at a time doing so
+ 		 * may unfairly penalize them.
+ 		 */
+-		if (tries[0] && ndx[0] >= 0) {
++		if (mrr->retries0 && ndx[0] >= 0) {
+ 			update_stats(sc, an, frame_size,
+-				ndx[0], tries[0],
+-				ndx[1], tries[1],
+-				ndx[2], tries[2],
+-				ndx[3], tries[3],
++				ndx[0], mrr->retries0,
++				ndx[1], mrr->retries1,
++				ndx[2], mrr->retries2,
++				ndx[3], mrr->retries3,
+ 				short_tries, long_tries,
+-				long_tries > tries[0]);
+-			long_tries -= tries[0];
++				long_tries > mrr->retries0);
++			long_tries -= mrr->retries0;
+ 
+ 		}
+ 
+-		if (tries[1] && ndx[1] >= 0 && finalTSIdx > 0) {
++		if (mrr->retries1 && ndx[1] >= 0 && finalTSIdx > 0) {
+ 			update_stats(sc, an, frame_size,
+-				ndx[1], tries[1],
+-				ndx[2], tries[2],
+-				ndx[3], tries[3],
++				ndx[1], mrr->retries1,
++				ndx[2], mrr->retries2,
++				ndx[3], mrr->retries3,
+ 				0, 0,
+ 				short_tries, long_tries,
+ 				ts->ts_status);
+-			long_tries -= tries[1];
++			long_tries -= mrr->retries1;
+ 		}
+ 
+-		if (tries[2] && ndx[2] >= 0 && finalTSIdx > 1) {
++		if (mrr->retries2 && ndx[2] >= 0 && finalTSIdx > 1) {
+ 			update_stats(sc, an, frame_size,
+-				ndx[2], tries[2],
+-				ndx[3], tries[3],
++				ndx[2], mrr->retries2,
++				ndx[3], mrr->retries3,
+ 				0, 0,
+ 				0, 0,
+ 				short_tries, long_tries,
+ 				ts->ts_status);
+-			long_tries -= tries[2];
++			long_tries -= mrr->retries2;
+ 		}
+ 
+-		if (tries[3] && ndx[3] >= 0 && finalTSIdx > 2) {
++		if (mrr->retries3 && ndx[3] >= 0 && finalTSIdx > 2) {
+ 			update_stats(sc, an, frame_size,
+-				ndx[3], tries[3],
++				ndx[3], mrr->retries3,
+ 				0, 0,
+ 				0, 0,
+ 				0, 0,
+--- a/ath_rate/sample/sample.h
++++ b/ath_rate/sample/sample.h
+@@ -98,36 +98,4 @@ struct sample_node {
+ };
+ #define	ATH_NODE_SAMPLE(an)	((struct sample_node *)&an[1])
+ 
+-
+-/*
+- * Definitions for pulling the rate and trie counts from
+- * a 5212 h/w descriptor. These Don't belong here; the
+- * driver should record this information so the rate control
+- * code doesn't go groveling around in the descriptor bits.
+- */
+-#define	ds_ctl2	ds_hw[0]
+-#define	ds_ctl3	ds_hw[1]
+-
+-/* TX ds_ctl3 */
+-#define	AR_XmitDataTries0	0x000f0000	/* series 0 max attempts */
+-#define	AR_XmitDataTries0_S	16
+-#define	AR_XmitDataTries1	0x00f00000	/* series 1 max attempts */
+-#define	AR_XmitDataTries1_S	20
+-#define	AR_XmitDataTries2	0x0f000000	/* series 2 max attempts */
+-#define	AR_XmitDataTries2_S	24
+-#define	AR_XmitDataTries3	0xf0000000	/* series 3 max attempts */
+-#define	AR_XmitDataTries3_S	28
+-
+-/* TX ds_ctl3 */
+-#define	AR_XmitRate0		0x0000001f	/* series 0 tx rate */
+-#define	AR_XmitRate0_S		0
+-#define	AR_XmitRate1		0x000003e0	/* series 1 tx rate */
+-#define	AR_XmitRate1_S		5
+-#define	AR_XmitRate2		0x00007c00	/* series 2 tx rate */
+-#define	AR_XmitRate2_S		10
+-#define	AR_XmitRate3		0x000f8000	/* series 3 tx rate */
+-#define	AR_XmitRate3_S		15
+-
+-#define MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
+-
+ #endif /* _DEV_ATH_RATE_SAMPLE_H */