openwrt/upstream - upstream openwrt

diff options

author	Felix Fietkau <nbd@openwrt.org>	2013-05-15 09:36:02 +0000
committer	Felix Fietkau <nbd@openwrt.org>	2013-05-15 09:36:02 +0000
commit	325629b4fc40f8e01fd71cbebbeec37773c3726a (patch)
tree	a3618e8d45625f2d18cd281fc974601f844471ad /package/mac80211
parent	580481cd6dd0f9199814974b9b176a6a038c24fb (diff)
download	upstream-325629b4fc40f8e01fd71cbebbeec37773c3726a.tar.gz upstream-325629b4fc40f8e01fd71cbebbeec37773c3726a.tar.bz2 upstream-325629b4fc40f8e01fd71cbebbeec37773c3726a.zip

mac80211: add HT support for mesh

This is a quick patch to enable HT for mesh mode https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput http://lists.open80211s.org/pipermail/devel/2012-March/002990.html For my test setup the speed increased from 1-2 Mbytes/sec to 8-10 Mbytes/sec (iperf) Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> SVN-Revision: 36639

Diffstat (limited to 'package/mac80211')

-rw-r--r--

package/mac80211/files/lib/wifi/mac80211.sh

1 files changed, 6 insertions, 1 deletions

# RGB Lighting QMK has the ability to control RGB LEDs attached to your keyboard. This is commonly called *underglow*, due to the LEDs often being mounted on the bottom of the keyboard, producing a nice diffused effect when combined with a translucent case. ![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/3774a7fcdab5544fc787f4c200be05fcd417e31f/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg) Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard. Currently QMK supports the following addressable LEDs on AVR microcontrollers (however, the white LED in RGBW variants is not supported): * WS2811, WS2812, WS2812B, WS2812C, etc. * SK6812, SK6812MINI, SK6805 These LEDs are called "addressable" because instead of using a wire per color, each LED contains a small microchip that understands a special protocol sent over a single wire. The chip passes on the remaining data to the next LED, allowing them to be chained together. In this way, you can easily control the color of the individual LEDs. ## Usage On keyboards with onboard RGB LEDs, it is usually enabled by default. If it is not working for you, check that your `rules.mk` includes the following: ```make RGBLIGHT_ENABLE = yes ``` At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these. |Define |Description | |------------|---------------------------------------------| |`RGB_DI_PIN`|The pin connected to the data pin of the LEDs| |`RGBLED_NUM`|The number of LEDs connected | Then you should be able to use the keycodes below to change the RGB lighting to your liking. ### Color Selection QMK uses [Hue, Saturation, and Value](https://en.wikipedia.org/wiki/HSL_and_HSV) to select colors rather than RGB. The color wheel below demonstrates how this works. <img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250"/> Changing the **Hue** cycles around the circle. Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.


context:
space:
mode: