move lots of kernel related packages to the new system/ folder

SVN-Revision: 33830

1 files changed, 0 insertions, 702 deletions

diff --git a/package/ltq-dsl/src/ifxmips_mei_interface.h b/package/ltq-dsl/src/ifxmips_mei_interface.h
deleted file mode 100644
index 4ddc4c6aed..0000000000
--- a/package/ltq-dsl/src/ifxmips_mei_interface.h
+++ /dev/null
@@ -1,702 +0,0 @@
-/******************************************************************************
-
-                               Copyright (c) 2009
-                            Infineon Technologies AG
-                     Am Campeon 1-12; 81726 Munich, Germany
-
-  For licensing information, see the file 'LICENSE' in the root folder of
-  this software module.
-
-******************************************************************************/
-
-#ifndef IFXMIPS_MEI_H
-#define IFXMIPS_MEI_H
-
-//#define CONFIG_AMAZON_SE 1
-//#define CONFIG_DANUBE 1
-//#define CONFIG_AR9 1
-
-#if !defined(CONFIG_DANUBE) && !defined(CONFIG_AMAZON_SE) && !defined(CONFIG_AR9) && !defined(CONFIG_VR9)
-#error Platform undefined!!!
-#endif
-
-#ifdef IFX_MEI_BSP
-/** This is the character datatype. */
-typedef char            DSL_char_t;
-/** This is the unsigned 8-bit datatype. */
-typedef unsigned char   DSL_uint8_t;
-/** This is the signed 8-bit datatype. */
-typedef signed char     DSL_int8_t;
-/** This is the unsigned 16-bit datatype. */
-typedef unsigned short  DSL_uint16_t;
-/** This is the signed 16-bit datatype. */
-typedef signed short    DSL_int16_t;
-/** This is the unsigned 32-bit datatype. */
-typedef unsigned long   DSL_uint32_t;
-/** This is the signed 32-bit datatype. */
-typedef signed long     DSL_int32_t;
-/** This is the float datatype. */
-typedef float           DSL_float_t;
-/** This is the void datatype. */
-typedef void            DSL_void_t;
-/** integer type, width is depending on processor arch */
-typedef int             DSL_int_t;
-/** unsigned integer type, width is depending on processor arch */
-typedef unsigned int    DSL_uint_t;
-typedef struct file DSL_DRV_file_t;
-typedef struct inode DSL_DRV_inode_t;
-
-/**
- *    Defines all possible CMV groups
- *    */
-typedef enum {
-   DSL_CMV_GROUP_CNTL = 1,
-   DSL_CMV_GROUP_STAT = 2,
-   DSL_CMV_GROUP_INFO = 3,
-   DSL_CMV_GROUP_TEST = 4,
-   DSL_CMV_GROUP_OPTN = 5,
-   DSL_CMV_GROUP_RATE = 6,
-   DSL_CMV_GROUP_PLAM = 7,
-   DSL_CMV_GROUP_CNFG = 8
-} DSL_CmvGroup_t;
-/**
- *    Defines all opcode types
- *    */
-typedef enum {
-   H2D_CMV_READ = 0x00,
-   H2D_CMV_WRITE = 0x04,
-   H2D_CMV_INDICATE_REPLY = 0x10,
-   H2D_ERROR_OPCODE_UNKNOWN =0x20,
-   H2D_ERROR_CMV_UNKNOWN =0x30,
-
-   D2H_CMV_READ_REPLY =0x01,
-   D2H_CMV_WRITE_REPLY = 0x05,
-   D2H_CMV_INDICATE = 0x11,
-   D2H_ERROR_OPCODE_UNKNOWN = 0x21,
-   D2H_ERROR_CMV_UNKNOWN = 0x31,
-   D2H_ERROR_CMV_READ_NOT_AVAILABLE = 0x41,
-   D2H_ERROR_CMV_WRITE_ONLY = 0x51,
-   D2H_ERROR_CMV_READ_ONLY = 0x61,
-
-   H2D_DEBUG_READ_DM = 0x02,
-   H2D_DEBUG_READ_PM = 0x06,
-   H2D_DEBUG_WRITE_DM = 0x0a,
-   H2D_DEBUG_WRITE_PM = 0x0e,
-
-   D2H_DEBUG_READ_DM_REPLY = 0x03,
-   D2H_DEBUG_READ_FM_REPLY = 0x07,
-   D2H_DEBUG_WRITE_DM_REPLY = 0x0b,
-   D2H_DEBUG_WRITE_FM_REPLY = 0x0f,
-   D2H_ERROR_ADDR_UNKNOWN = 0x33,
-
-   D2H_AUTONOMOUS_MODEM_READY_MSG = 0xf1
-} DSL_CmvOpcode_t;
-
-/* mutex macros */
-#define MEI_MUTEX_INIT(id,flag) \
-        sema_init(&id,flag)
-#define MEI_MUTEX_LOCK(id) \
-        down_interruptible(&id)
-#define MEI_MUTEX_UNLOCK(id) \
-        up(&id)
-#define MEI_WAIT(ms) \
-        {\
-                set_current_state(TASK_INTERRUPTIBLE);\
-                schedule_timeout(ms);\
-        }
-#define MEI_INIT_WAKELIST(name,queue) \
-        init_waitqueue_head(&queue)
-
-/* wait for an event, timeout is measured in ms */
-#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
-        interruptible_sleep_on_timeout(&ev,timeout * HZ / 1000)
-#define MEI_WAKEUP_EVENT(ev)\
-        wake_up_interruptible(&ev)
-#endif /* IFX_MEI_BSP */
-
-/***	Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define ME_DX_DATA				(0x0000)
-#define	ME_VERSION				(0x0004)
-#define	ME_ARC_GP_STAT				(0x0008)
-#define ME_DX_STAT				(0x000C)
-#define	ME_DX_AD				(0x0010)
-#define ME_DX_MWS				(0x0014)
-#define	ME_ME2ARC_INT				(0x0018)
-#define	ME_ARC2ME_STAT				(0x001C)
-#define	ME_ARC2ME_MASK 				(0x0020)
-#define	ME_DBG_WR_AD				(0x0024)
-#define ME_DBG_RD_AD				(0x0028)
-#define	ME_DBG_DATA				(0x002C)
-#define	ME_DBG_DECODE				(0x0030)
-#define ME_CONFIG				(0x0034)
-#define	ME_RST_CTRL				(0x0038)
-#define	ME_DBG_MASTER				(0x003C)
-#define	ME_CLK_CTRL				(0x0040)
-#define	ME_BIST_CTRL				(0x0044)
-#define	ME_BIST_STAT				(0x0048)
-#define ME_XDATA_BASE_SH			(0x004c)
-#define ME_XDATA_BASE				(0x0050)
-#define ME_XMEM_BAR_BASE			(0x0054)
-#define ME_XMEM_BAR0				(0x0054)
-#define ME_XMEM_BAR1				(0x0058)
-#define ME_XMEM_BAR2				(0x005C)
-#define ME_XMEM_BAR3				(0x0060)
-#define ME_XMEM_BAR4				(0x0064)
-#define ME_XMEM_BAR5				(0x0068)
-#define ME_XMEM_BAR6				(0x006C)
-#define ME_XMEM_BAR7				(0x0070)
-#define ME_XMEM_BAR8				(0x0074)
-#define ME_XMEM_BAR9				(0x0078)
-#define ME_XMEM_BAR10				(0x007C)
-#define ME_XMEM_BAR11				(0x0080)
-#define ME_XMEM_BAR12				(0x0084)
-#define ME_XMEM_BAR13				(0x0088)
-#define ME_XMEM_BAR14				(0x008C)
-#define ME_XMEM_BAR15				(0x0090)
-#define ME_XMEM_BAR16				(0x0094)
-
-#define WHILE_DELAY 		20000
-/*
-**	Define where in ME Processor's memory map the Stratify chip lives
-*/
-
-#define MAXSWAPSIZE      	(8 * 1024)	//8k *(32bits)
-
-//      Mailboxes
-#define MSG_LENGTH		16	// x16 bits
-#define YES_REPLY      	 	1
-#define NO_REPLY         	0
-
-#define CMV_TIMEOUT		1000	//jiffies
-
-//  Block size per BAR
-#define SDRAM_SEGMENT_SIZE	(64*1024)
-// Number of Bar registers
-#define MAX_BAR_REGISTERS	(17)
-
-#define XDATA_REGISTER		(15)
-
-// ARC register addresss
-#define ARC_STATUS		0x0
-#define ARC_LP_START		0x2
-#define ARC_LP_END		0x3
-#define ARC_DEBUG		0x5
-#define ARC_INT_MASK		0x10A
-
-#define IRAM0_BASE 		(0x00000)
-#define IRAM1_BASE 		(0x04000)
-#if defined(CONFIG_DANUBE)
-#define BRAM_BASE  		(0x0A000)
-#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
-#define BRAM_BASE               (0x08000)
-#endif
-#define XRAM_BASE		(0x18000)
-#define YRAM_BASE		(0x1A000)
-#define EXT_MEM_BASE		(0x80000)
-#define ARC_GPIO_CTRL		(0xC030)
-#define ARC_GPIO_DATA		(0xC034)
-
-#define IRAM0_SIZE		(16*1024)
-#define IRAM1_SIZE		(16*1024)
-#define BRAM_SIZE		(12*1024)
-#define XRAM_SIZE		(8*1024)
-#define YRAM_SIZE		(8*1024)
-#define EXT_MEM_SIZE		(1536*1024)
-
-#define ADSL_BASE		(0x20000)
-#define CRI_BASE		(ADSL_BASE + 0x11F00)
-#define CRI_CCR0		(CRI_BASE + 0x00)
-#define CRI_RST			(CRI_BASE + 0x04*4)
-#define ADSL_DILV_BASE 		(ADSL_BASE+0x20000)
-
-//
-#define IRAM0_ADDR_BIT_MASK	0xFFF
-#define IRAM1_ADDR_BIT_MASK	0xFFF
-#define BRAM_ADDR_BIT_MASK	0xFFF
-#define RX_DILV_ADDR_BIT_MASK	0x1FFF
-
-/***  Bit definitions ***/
-#define ARC_AUX_HALT		(1 << 25)
-#define ARC_DEBUG_HALT		(1 << 1)
-#define FALSE			0
-#define TRUE			1
-#define BIT0			(1<<0)
-#define BIT1			(1<<1)
-#define BIT2			(1<<2)
-#define BIT3			(1<<3)
-#define BIT4			(1<<4)
-#define BIT5			(1<<5)
-#define BIT6			(1<<6)
-#define BIT7			(1<<7)
-#define BIT8			(1<<8)
-#define BIT9			(1<<9)
-#define BIT10 			(1<<10)
-#define BIT11			(1<<11)
-#define BIT12			(1<<12)
-#define BIT13			(1<<13)
-#define BIT14			(1<<14)
-#define BIT15			(1<<15)
-#define BIT16 			(1<<16)
-#define BIT17			(1<<17)
-#define BIT18			(1<<18)
-#define BIT19			(1<<19)
-#define BIT20			(1<<20)
-#define BIT21			(1<<21)
-#define BIT22			(1<<22)
-#define BIT23			(1<<23)
-#define BIT24			(1<<24)
-#define BIT25			(1<<25)
-#define BIT26			(1<<26)
-#define BIT27			(1<<27)
-#define BIT28			(1<<28)
-#define BIT29			(1<<29)
-#define BIT30			(1<<30)
-#define BIT31			(1<<31)
-
-// CRI_CCR0 Register definitions
-#define CLK_2M_MODE_ENABLE	BIT6
-#define	ACL_CLK_MODE_ENABLE	BIT4
-#define FDF_CLK_MODE_ENABLE	BIT2
-#define STM_CLK_MODE_ENABLE	BIT0
-
-// CRI_RST Register definitions
-#define FDF_SRST		BIT3
-#define MTE_SRST		BIT2
-#define FCI_SRST		BIT1
-#define AAI_SRST		BIT0
-
-//      MEI_TO_ARC_INTERRUPT Register definitions
-#define	MEI_TO_ARC_INT1		BIT3
-#define	MEI_TO_ARC_INT0		BIT2
-#define MEI_TO_ARC_CS_DONE	BIT1	//need to check
-#define	MEI_TO_ARC_MSGAV	BIT0
-
-//      ARC_TO_MEI_INTERRUPT Register definitions
-#define	ARC_TO_MEI_INT1		BIT8
-#define	ARC_TO_MEI_INT0		BIT7
-#define	ARC_TO_MEI_CS_REQ	BIT6
-#define	ARC_TO_MEI_DBG_DONE	BIT5
-#define	ARC_TO_MEI_MSGACK	BIT4
-#define	ARC_TO_MEI_NO_ACCESS	BIT3
-#define	ARC_TO_MEI_CHECK_AAITX	BIT2
-#define	ARC_TO_MEI_CHECK_AAIRX	BIT1
-#define	ARC_TO_MEI_MSGAV	BIT0
-
-//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define	GP_INT1_EN		BIT8
-#define	GP_INT0_EN		BIT7
-#define	CS_REQ_EN		BIT6
-#define	DBG_DONE_EN		BIT5
-#define	MSGACK_EN		BIT4
-#define	NO_ACC_EN		BIT3
-#define	AAITX_EN		BIT2
-#define	AAIRX_EN		BIT1
-#define	MSGAV_EN		BIT0
-
-#define	MEI_SOFT_RESET		BIT0
-
-#define	HOST_MSTR		BIT0
-
-#define JTAG_MASTER_MODE	0x0
-#define MEI_MASTER_MODE		HOST_MSTR
-
-//      MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK	(0x3)
-#define MEI_DEBUG_DEC_AUX_MASK	(0x0)
-#define ME_DBG_DECODE_DMP1_MASK	(0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK	(0x2)
-#define MEI_DEBUG_DEC_CORE_MASK	(0x3)
-
-#define AUX_STATUS		(0x0)
-#define AUX_ARC_GPIO_CTRL	(0x10C)
-#define AUX_ARC_GPIO_DATA	(0x10D)
-//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-//      page swap requests.
-#if defined(CONFIG_DANUBE)
-#define OMBOX_BASE      	0xDF80
-#define	ARC_TO_MEI_MAILBOX	0xDFA0
-#define IMBOX_BASE      	0xDFC0
-#define MEI_TO_ARC_MAILBOX	0xDFD0
-#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
-#define OMBOX_BASE              0xAF80
-#define ARC_TO_MEI_MAILBOX      0xAFA0
-#define IMBOX_BASE              0xAFC0
-#define MEI_TO_ARC_MAILBOX      0xAFD0
-#endif
-
-#define MEI_TO_ARC_MAILBOXR	(MEI_TO_ARC_MAILBOX + 0x2C)
-#define ARC_MEI_MAILBOXR	(ARC_TO_MEI_MAILBOX + 0x2C)
-#define OMBOX1  		(OMBOX_BASE+0x4)
-
-// Codeswap request messages are indicated by setting BIT31
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK	(0x80000000)
-
-// Clear Eoc messages received are indicated by setting BIT17
-#define OMB_CLEAREOC_INTERRUPT_CODE		(0x00020000)
-#define OMB_REBOOT_INTERRUPT_CODE               (1 << 18)
-
-/*
-**	Swap page header
-*/
-//      Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG		(BIT31)
-#define BOOT_FLAG_MASK		~BOOT_FLAG
-
-#define FREE_RELOAD		1
-#define FREE_SHOWTIME		2
-#define FREE_ALL		3
-
-// marcos
-#define	IFX_MEI_WRITE_REGISTER_L(data,addr)	*((volatile u32*)(addr)) = (u32)(data)
-#define IFX_MEI_READ_REGISTER_L(addr) 	(*((volatile u32*)(addr)))
-#define SET_BIT(reg, mask)			reg |= (mask)
-#define CLEAR_BIT(reg, mask)			reg &= (~mask)
-#define CLEAR_BITS(reg, mask)			CLEAR_BIT(reg, mask)
-//#define SET_BITS(reg, mask)			SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)	{reg &= (~mask); reg |= (val << off);}
-
-#define ALIGN_SIZE				( 1L<<10 )	//1K size align
-#define MEM_ALIGN(addr)				(((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
-
-// swap marco
-#define MEI_HALF_WORD_SWAP(data)		{data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
-#define MEI_BYTE_SWAP(data)			{data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
-
-
-#ifdef CONFIG_PROC_FS
-typedef struct reg_entry
-{
-   int *flag;
-   char name[30];               /* big enough to hold names */
-   char description[100];       /* big enough to hold description */
-   unsigned short low_ino;
-} reg_entry_t;
-#endif
-//      Swap page header describes size in 32-bit words, load location, and image offset
-//      for program and/or data segments
-typedef struct _arc_swp_page_hdr {
-	u32 p_offset;		//Offset bytes of progseg from beginning of image
-	u32 p_dest;		//Destination addr of progseg on processor
-	u32 p_size;		//Size in 32-bitwords of program segment
-	u32 d_offset;		//Offset bytes of dataseg from beginning of image
-	u32 d_dest;		//Destination addr of dataseg on processor
-	u32 d_size;		//Size in 32-bitwords of data segment
-} ARC_SWP_PAGE_HDR;
-
-/*
-**	Swap image header
-*/
-#define GET_PROG	0	//      Flag used for program mem segment
-#define GET_DATA	1	//      Flag used for data mem segment
-
-//      Image header contains size of image, checksum for image, and count of
-//      page headers. Following that are 'count' page headers followed by
-//      the code and/or data segments to be loaded
-typedef struct _arc_img_hdr {
-	u32 size;		//      Size of binary image in bytes
-	u32 checksum;		//      Checksum for image
-	u32 count;		//      Count of swp pages in image
-	ARC_SWP_PAGE_HDR page[1];	//      Should be "count" pages - '1' to make compiler happy
-} ARC_IMG_HDR;
-
-typedef struct smmu_mem_info {
-	int type;
-	int boot;
-	unsigned long nCopy;
-	unsigned long size;
-	unsigned char *address;
-	unsigned char *org_address;
-} smmu_mem_info_t;
-
-#ifdef __KERNEL__
-typedef struct ifx_mei_device_private {
-	int modem_ready;
-	int arcmsgav;
-	int cmv_reply;
-	int cmv_waiting;
-	// Mei to ARC CMV count, reply count, ARC Indicator count
-	int modem_ready_cnt;
-	int cmv_count;
-	int reply_count;
-	unsigned long image_size;
-	int nBar;
-	u16 Recent_indicator[MSG_LENGTH];
-
-	u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
-
-	smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
-	ARC_IMG_HDR *img_hdr;
-	//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
-	wait_queue_head_t wait_queue_arcmsgav;
-	wait_queue_head_t wait_queue_modemready;
-	struct semaphore mei_cmv_sema;
-} ifx_mei_device_private_t;
-#endif
-typedef struct winhost_message {
-	union {
-		u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-		u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-	} msg;
-} DSL_DEV_WinHost_Message_t;
-/********************************************************************************************************
- * DSL CPE API Driver Stack Interface Definitions
- * *****************************************************************************************************/
-/** IOCTL codes for bsp driver */
-#define DSL_IOC_MEI_BSP_MAGIC		's'
-
-#define DSL_FIO_BSP_DSL_START		_IO  (DSL_IOC_MEI_BSP_MAGIC, 0)
-#define DSL_FIO_BSP_RUN			_IO  (DSL_IOC_MEI_BSP_MAGIC, 1)
-#define DSL_FIO_BSP_FREE_RESOURCE	_IO  (DSL_IOC_MEI_BSP_MAGIC, 2)
-#define DSL_FIO_BSP_RESET		_IO  (DSL_IOC_MEI_BSP_MAGIC, 3)
-#define DSL_FIO_BSP_REBOOT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 4)
-#define DSL_FIO_BSP_HALT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 5)
-#define DSL_FIO_BSP_BOOTDOWNLOAD	_IO  (DSL_IOC_MEI_BSP_MAGIC, 6)
-#define DSL_FIO_BSP_JTAG_ENABLE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 7)
-#define DSL_FIO_FREE_RESOURCE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 8)
-#define DSL_FIO_ARC_MUX_TEST		_IO  (DSL_IOC_MEI_BSP_MAGIC, 9)
-#define DSL_FIO_BSP_REMOTE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 10, u32)
-#define DSL_FIO_BSP_GET_BASE_ADDRESS	_IOR (DSL_IOC_MEI_BSP_MAGIC, 11, u32)
-#define DSL_FIO_BSP_IS_MODEM_READY	_IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32)
-#define DSL_FIO_BSP_GET_VERSION		_IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t)
-#define DSL_FIO_BSP_CMV_WINHOST		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, DSL_DEV_WinHost_Message_t)
-#define DSL_FIO_BSP_CMV_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, DSL_DEV_MeiReg_t)
-#define DSL_FIO_BSP_CMV_WRITE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 16, DSL_DEV_MeiReg_t)
-#define DSL_FIO_BSP_DEBUG_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, DSL_DEV_MeiDebug_t)
-#define DSL_FIO_BSP_DEBUG_WRITE		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, DSL_DEV_MeiDebug_t)
-#define DSL_FIO_BSP_GET_CHIP_INFO	_IOR (DSL_IOC_MEI_BSP_MAGIC, 19, DSL_DEV_HwVersion_t)
-
-#define DSL_DEV_MEIDEBUG_BUFFER_SIZES	512
-
-typedef struct DSL_DEV_MeiDebug
-{
-	DSL_uint32_t iAddress;
-	DSL_uint32_t iCount;
-	DSL_uint32_t buffer[DSL_DEV_MEIDEBUG_BUFFER_SIZES];
-} DSL_DEV_MeiDebug_t;			/* meidebug */
-
-/**
- *    Structure is used for debug access only.
- *       Refer to configure option INCLUDE_ADSL_WINHOST_DEBUG */
-typedef struct struct_meireg
-{
-	/*
-	*       Specifies that address for debug access */
-	unsigned long iAddress;
-	/*
-	*       Specifies the pointer to the data that has to be written or returns a
-	*             pointer to the data that has been read out*/
-	unsigned long iData;
-} DSL_DEV_MeiReg_t;					/* meireg */
-
-typedef struct DSL_DEV_Device
-{
-	DSL_int_t nInUse;                /* modem state, update by bsp driver, */
-	DSL_void_t *pPriv;
-	DSL_uint32_t base_address;       /* mei base address */
-	DSL_int_t nIrq[2];                  /* irq number */
-#define IFX_DFEIR		0
-#define IFX_DYING_GASP	1
-	DSL_DEV_MeiDebug_t lop_debugwr;  /* dying gasp */
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0))
-	struct module *owner;
-#endif
-} DSL_DEV_Device_t;			/* ifx_adsl_device_t */
-
-#define DSL_DEV_PRIVATE(dev)  ((ifx_mei_device_private_t*)(dev->pPriv))
-
-typedef struct DSL_DEV_Version		/* ifx_adsl_bsp_version */
-{
-	unsigned long major;
-	unsigned long minor;
-	unsigned long revision;
-} DSL_DEV_Version_t;			/* ifx_adsl_bsp_version_t */
-
-typedef struct DSL_DEV_ChipInfo
-{
-	unsigned long major;
-	unsigned long minor;
-} DSL_DEV_HwVersion_t;
-
-typedef struct
-{
-	DSL_uint8_t dummy;
-} DSL_DEV_DeviceConfig_t;
-
-/** error code definitions */
-typedef enum DSL_DEV_MeiError
-{
-	DSL_DEV_MEI_ERR_SUCCESS = 0,
-	DSL_DEV_MEI_ERR_FAILURE = -1,
-	DSL_DEV_MEI_ERR_MAILBOX_FULL = -2,
-	DSL_DEV_MEI_ERR_MAILBOX_EMPTY = -3,
-	DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT = -4
-} DSL_DEV_MeiError_t;			/* MEI_ERROR */
-
-typedef enum {
-	DSL_BSP_MEMORY_READ=0,
-	DSL_BSP_MEMORY_WRITE,
-} DSL_BSP_MemoryAccessType_t;		/* ifx_adsl_memory_access_type_t */
-
-typedef enum
-{
-	DSL_LED_LINK_ID=0,
-	DSL_LED_DATA_ID
-} DSL_DEV_LedId_t;			/* ifx_adsl_led_id_t */
-
-typedef enum
-{
-	DSL_LED_LINK_TYPE=0,
-	DSL_LED_DATA_TYPE
-} DSL_DEV_LedType_t;			/* ifx_adsl_led_type_t */
-
-typedef enum
-{
-	DSL_LED_HD_CPU=0,
-	DSL_LED_HD_FW
-} DSL_DEV_LedHandler_t;			/* ifx_adsl_led_handler_t */
-
-typedef enum {
-	DSL_LED_ON=0,
-	DSL_LED_OFF,
-	DSL_LED_FLASH,
-} DSL_DEV_LedMode_t;			/* ifx_adsl_led_mode_t */
-
-typedef enum {
-	DSL_CPU_HALT=0,
-	DSL_CPU_RUN,
-	DSL_CPU_RESET,
-} DSL_DEV_CpuMode_t;			/* ifx_adsl_cpu_mode_t */
-
-#if 0
-typedef enum {
-	DSL_BSP_EVENT_DYING_GASP = 0,
-	DSL_BSP_EVENT_CEOC_IRQ,
-} DSL_BSP_Event_id_t;			/* ifx_adsl_event_id_t */
-
-typedef union DSL_BSP_CB_Param
-{
-	DSL_uint32_t nIrqMessage;
-} DSL_BSP_CB_Param_t;			/* ifx_adsl_cbparam_t */
-
-typedef struct DSL_BSP_CB_Event
-{
-	DSL_BSP_Event_id_t nID;
-	DSL_DEV_Device_t *pDev;
-	DSL_BSP_CB_Param_t *pParam;
-} DSL_BSP_CB_Event_t;			/* ifx_adsl_cb_event_t */
-#endif
-
-/* external functions (from the BSP Driver) */
-extern DSL_DEV_Device_t* DSL_BSP_DriverHandleGet(int, int);
-extern DSL_int_t DSL_BSP_DriverHandleDelete(DSL_DEV_Device_t *);
-extern DSL_DEV_MeiError_t DSL_BSP_FWDownload(DSL_DEV_Device_t *, const DSL_char_t *, DSL_uint32_t, DSL_int32_t *, DSL_int32_t *);
-extern int DSL_BSP_KernelIoctls(DSL_DEV_Device_t *, unsigned int, unsigned long);
-extern DSL_DEV_MeiError_t DSL_BSP_SendCMV(DSL_DEV_Device_t *, DSL_uint16_t *, DSL_int_t, DSL_uint16_t *);
-extern DSL_DEV_MeiError_t DSL_BSP_AdslLedInit(DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t);
-extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t);
-extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void));
-extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t);
-extern volatile DSL_DEV_Device_t *adsl_dev;
-
-/**
- *    Dummy structure by now to show mechanism of extended data that will be
- *       provided within event callback itself.
- *       */
-typedef struct
-{
-	/**
-	*    Dummy value */
-	DSL_uint32_t nDummy1;
-} DSL_BSP_CB_Event1DataDummy_t;
-
-/**
- *    Dummy structure by now to show mechanism of extended data that will be
- *       provided within event callback itself.
- *       */
-typedef struct
-{
-	/**
-	*    Dummy value */
-	DSL_uint32_t nDummy2;
-} DSL_BSP_CB_Event2DataDummy_t;
-
-/**
- *    encapsulate all data structures that are necessary for status event
- *       callbacks.
- *       */
-typedef union
-{
-	DSL_BSP_CB_Event1DataDummy_t dataEvent1;
-	DSL_BSP_CB_Event2DataDummy_t dataEvent2;
-} DSL_BSP_CB_DATA_Union_t;
-
-
-typedef enum
-{
-	/**
-	 *    Informs the upper layer driver (DSL CPE API) about a reboot request from the
-	 *       firmware.
-	 *          \note This event does NOT include any additional data.
-	 *                   More detailed information upon reboot reason has to be requested from
-	 *                            upper layer software via CMV (INFO 109) if necessary. */
-	DSL_BSP_CB_FIRST = 0,
-        DSL_BSP_CB_DYING_GASP,
-	DSL_BSP_CB_CEOC_IRQ,
-	DSL_BSP_CB_FIRMWARE_REBOOT,
-	/**
-	 *    Delimiter only */
-	DSL_BSP_CB_LAST
-} DSL_BSP_CB_Type_t;
-
-/**
- *    Specifies the common event type that has to be used for registering and
- *       signalling of interrupts/autonomous status events from MEI BSP Driver.
- *
- *    \param pDev
- *    Context pointer from MEI BSP Driver.
- *
- *    \param IFX_ADSL_BSP_CallbackType_t
- *    Specifies the event callback type (reason of callback). Regrading to the
- *    setting of this value the data which is included in the following union
- *    might have different meanings.
- *    Please refer to the description of the union to get information about the
- *    meaning of the included data.
- *
- *    \param pData
- *    Data according to \ref DSL_BSP_CB_DATA_Union_t.
- *    If this pointer is NULL there is no additional data available.
- *
- *    \return depending on event
- */
-typedef int (*DSL_BSP_EventCallback_t)
-(
-	DSL_DEV_Device_t *pDev,
-	DSL_BSP_CB_Type_t nCallbackType,
-	DSL_BSP_CB_DATA_Union_t *pData
-);
-
-typedef struct {
-        DSL_BSP_EventCallback_t function;
-        DSL_BSP_CB_Type_t       event;
-        DSL_BSP_CB_DATA_Union_t *pData;
-} DSL_BSP_EventCallBack_t;
-
-extern int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *);
-extern int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *);
-
-/** Modem states */
-#define DSL_DEV_STAT_InitState              0x0000
-#define DSL_DEV_STAT_ReadyState             0x0001
-#define DSL_DEV_STAT_FailState              0x0002
-#define DSL_DEV_STAT_IdleState              0x0003
-#define DSL_DEV_STAT_QuietState             0x0004
-#define DSL_DEV_STAT_GhsState               0x0005
-#define DSL_DEV_STAT_FullInitState          0x0006
-#define DSL_DEV_STAT_ShowTimeState          0x0007
-#define DSL_DEV_STAT_FastRetrainState       0x0008
-#define DSL_DEV_STAT_LoopDiagMode           0x0009
-#define DSL_DEV_STAT_ShortInit              0x000A     /* Bis short initialization */
-
-#define DSL_DEV_STAT_CODESWAP_COMPLETE	    0x0002
-
-#endif //IFXMIPS_MEI_H