add all source code from linksys/broadcom which is free, to cvs for better maintainence inside

openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@379 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 139 insertions, 0 deletions

diff --git a/package/linux/kernel-source/include/sbpcmcia.h b/package/linux/kernel-source/include/sbpcmcia.h
new file mode 100644
index 0000000000..2493d8c7ad
--- /dev/null
+++ b/package/linux/kernel-source/include/sbpcmcia.h
@@ -0,0 +1,139 @@
+/*
+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
+ *
+ * $Id$
+ * Copyright 2004, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ */
+
+#ifndef	_SBPCMCIA_H
+#define	_SBPCMCIA_H
+
+
+/* All the addresses that are offsets in attribute space are divided
+ * by two to account for the fact that odd bytes are invalid in
+ * attribute space and our read/write routines make the space appear
+ * as if they didn't exist. Still we want to show the original numbers
+ * as documented in the hnd_pcmcia core manual.
+ */
+
+/* PCMCIA Function Configuration Registers */
+#define	PCMCIA_FCR		(0x700 / 2)
+
+#define	FCR0_OFF		0
+#define	FCR1_OFF		(0x40 / 2)
+#define	FCR2_OFF		(0x80 / 2)
+#define	FCR3_OFF		(0xc0 / 2)
+
+#define	PCMCIA_FCR0		(0x700 / 2)
+#define	PCMCIA_FCR1		(0x740 / 2)
+#define	PCMCIA_FCR2		(0x780 / 2)
+#define	PCMCIA_FCR3		(0x7c0 / 2)
+
+/* Standard PCMCIA FCR registers */
+
+#define	PCMCIA_COR		0
+
+#define	COR_RST			0x80
+#define	COR_LEV			0x40
+#define	COR_IRQEN		0x04
+#define	COR_BLREN		0x01
+#define	COR_FUNEN		0x01
+
+
+#define	PCICIA_FCSR		(2 / 2)
+#define	PCICIA_PRR		(4 / 2)
+#define	PCICIA_SCR		(6 / 2)
+#define	PCICIA_ESR		(8 / 2)
+
+
+#define PCM_MEMOFF		0x0000
+#define F0_MEMOFF		0x1000
+#define F1_MEMOFF		0x2000
+#define F2_MEMOFF		0x3000
+#define F3_MEMOFF		0x4000
+
+/* Memory base in the function fcr's */
+#define MEM_ADDR0		(0x728 / 2)
+#define MEM_ADDR1		(0x72a / 2)
+#define MEM_ADDR2		(0x72c / 2)
+
+/* PCMCIA base plus Srom access in fcr0: */
+#define PCMCIA_ADDR0		(0x072e / 2)
+#define PCMCIA_ADDR1		(0x0730 / 2)
+#define PCMCIA_ADDR2		(0x0732 / 2)
+
+#define MEM_SEG			(0x0734 / 2)
+#define SROM_CS			(0x0736 / 2)
+#define SROM_DATAL		(0x0738 / 2)
+#define SROM_DATAH		(0x073a / 2)
+#define SROM_ADDRL		(0x073c / 2)
+#define SROM_ADDRH		(0x073e / 2)
+
+/*  Values for srom_cs: */
+#define SROM_IDLE		0
+#define SROM_WRITE		1
+#define SROM_READ		2
+#define SROM_WEN		4
+#define SROM_WDS		7
+#define SROM_DONE		8
+
+/* CIS stuff */
+
+/* The CIS stops where the FCRs start */
+#define	CIS_SIZE		PCMCIA_FCR
+
+/* Standard tuples we know about */
+
+#define	CISTPL_MANFID		0x20		/* Manufacturer and device id */
+#define	CISTPL_FUNCE		0x22		/* Function extensions */
+#define	CISTPL_CFTABLE		0x1b		/* Config table entry */
+
+/* Function extensions for LANs */
+
+#define	LAN_TECH		1		/* Technology type */
+#define	LAN_SPEED		2		/* Raw bit rate */
+#define	LAN_MEDIA		3		/* Transmission media */
+#define	LAN_NID			4		/* Node identification (aka MAC addr) */
+#define	LAN_CONN		5		/* Connector standard */
+
+
+/* CFTable */
+#define CFTABLE_REGWIN_2K	0x08		/* 2k reg windows size */
+#define CFTABLE_REGWIN_4K	0x10		/* 4k reg windows size */
+#define CFTABLE_REGWIN_8K	0x20		/* 8k reg windows size */
+
+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
+ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
+ */
+
+#define	CISTPL_BRCM_HNBU	0x80
+
+/* Subtypes of BRCM_HNBU: */
+
+#define	HNBU_CHIPID		0x01		/* Six bytes with PCI vendor &
+						 * device id and chiprev
+						 */
+#define	HNBU_BOARDREV		0x02		/* Two bytes board revision */
+#define	HNBU_PAPARMS		0x03		/* Eleven bytes PA parameters */
+#define	HNBU_OEM		0x04		/* Eight bytes OEM data */
+#define	HNBU_CC			0x05		/* Default country code */
+#define	HNBU_AA			0x06		/* Antennas available */
+#define	HNBU_AG			0x07		/* Antenna gain */
+#define HNBU_BOARDFLAGS		0x08		/* board flags */
+#define HNBU_LED		0x09		/* LED set */
+
+
+/* sbtmstatelow */
+#define SBTML_INT_ACK		0x40000		/* ack the sb interrupt */
+#define SBTML_INT_EN		0x20000		/* enable sb interrupt */
+
+/* sbtmstatehigh */
+#define SBTMH_INT_STATUS	0x40000		/* sb interrupt status */
+
+#endif	/* _SBPCMCIA_H */