move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@1085 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 242 deletions

diff --git a/package/linux/kernel-source/include/sbextif.h b/package/linux/kernel-source/include/sbextif.h
deleted file mode 100644
index 32274b8165..0000000000
--- a/package/linux/kernel-source/include/sbextif.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Hardware-specific External Interface I/O core definitions
- * for the BCM47xx family of SiliconBackplane-based chips.
- *
- * The External Interface core supports a total of three external chip selects
- * supporting external interfaces. One of the external chip selects is
- * used for Flash, one is used for PCMCIA, and the other may be
- * programmed to support either a synchronous interface or an
- * asynchronous interface. The asynchronous interface can be used to
- * support external devices such as UARTs and the BCM2019 Bluetooth
- * baseband processor.
- * The external interface core also contains 2 on-chip 16550 UARTs, clock
- * frequency control, a watchdog interrupt timer, and a GPIO interface.
- *
- * Copyright 2004, Broadcom Corporation      
- * All Rights Reserved.      
- *       
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
- * $Id$
- */
-
-#ifndef	_SBEXTIF_H
-#define	_SBEXTIF_H
-
-/* external interface address space */
-#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
-#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
-#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
-#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
-#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define	_PADLINE(line)	pad ## line
-#define	_XSTR(line)	_PADLINE(line)
-#define	PAD		_XSTR(__LINE__)
-#endif	/* PAD */
-
-/*
- * The multiple instances of output and output enable registers
- * are present to allow driver software for multiple cores to control
- * gpio outputs without needing to share a single register pair.
- */
-struct gpiouser {
-	uint32	out;
-	uint32	outen;
-};
-#define	NGPIOUSER	5
-
-typedef volatile struct {
-	uint32	corecontrol;
-	uint32	extstatus;
-	uint32	PAD[2];
-
-	/* pcmcia control registers */
-	uint32	pcmcia_config;
-	uint32	pcmcia_memwait;
-	uint32	pcmcia_attrwait;
-	uint32	pcmcia_iowait;
-
-	/* programmable interface control registers */
-	uint32	prog_config;
-	uint32	prog_waitcount;
-
-	/* flash control registers */
-	uint32	flash_config;
-	uint32	flash_waitcount;
-	uint32	PAD[4];
-
-	uint32	watchdog;
-
-	/* clock control */
-	uint32	clockcontrol_n;
-	uint32	clockcontrol_sb;
-	uint32	clockcontrol_pci;
-	uint32	clockcontrol_mii;
-	uint32	PAD[3];
-
-	/* gpio */
-	uint32	gpioin;
-	struct gpiouser	gpio[NGPIOUSER];
-	uint32	PAD;
-	uint32	ejtagouten;
-	uint32	gpiointpolarity;
-	uint32	gpiointmask;
-	uint32	PAD[153];
-
-	uint8	uartdata;
-	uint8	PAD[3];
-	uint8	uartimer;
-	uint8	PAD[3];
-	uint8	uartfcr;
-	uint8	PAD[3];
-	uint8	uartlcr;
-	uint8	PAD[3];
-	uint8	uartmcr;
-	uint8	PAD[3];
-	uint8	uartlsr;
-	uint8	PAD[3];
-	uint8	uartmsr;
-	uint8	PAD[3];
-	uint8	uartscratch;
-	uint8	PAD[3];
-} extifregs_t;
-
-/* corecontrol */
-#define	CC_UE		(1 << 0)		/* uart enable */
-
-/* extstatus */
-#define	ES_EM		(1 << 0)		/* endian mode (ro) */
-#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
-#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
-
-/* gpio bit mask */
-#define GPIO_BIT0	(1 << 0)
-#define GPIO_BIT1	(1 << 1)
-#define GPIO_BIT2	(1 << 2)
-#define GPIO_BIT3	(1 << 3)
-#define GPIO_BIT4	(1 << 4)
-#define GPIO_BIT5	(1 << 5)
-#define GPIO_BIT6	(1 << 6)
-#define GPIO_BIT7	(1 << 7)
-
-
-/* pcmcia/prog/flash_config */
-#define	CF_EN		(1 << 0)		/* enable */
-#define	CF_EM_MASK	0xe			/* mode */
-#define	CF_EM_SHIFT	1
-#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
-#define	CF_EM_SYNC	0x2			/* synchronous mode */
-#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
-#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
-#define	CF_BS		(1 << 5)		/* byteswap */
-#define	CF_CD_MASK	0xc0			/* clock divider */
-#define	CF_CD_SHIFT	6
-#define	CF_CD_DIV2	0x0			/* backplane/2 */
-#define	CF_CD_DIV3	0x40			/* backplane/3 */
-#define	CF_CD_DIV4	0x80			/* backplane/4 */
-#define	CF_CE		(1 << 8)		/* clock enable */
-#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
-
-/* pcmcia_memwait */
-#define	PM_W0_MASK	0x3f			/* waitcount0 */
-#define	PM_W1_MASK	0x1f00			/* waitcount1 */
-#define	PM_W1_SHIFT	8
-#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
-#define	PM_W2_SHIFT	16
-#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
-#define	PM_W3_SHIFT	24
-
-/* pcmcia_attrwait */
-#define	PA_W0_MASK	0x3f			/* waitcount0 */
-#define	PA_W1_MASK	0x1f00			/* waitcount1 */
-#define	PA_W1_SHIFT	8
-#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
-#define	PA_W2_SHIFT	16
-#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
-#define	PA_W3_SHIFT	24
-
-/* pcmcia_iowait */
-#define	PI_W0_MASK	0x3f			/* waitcount0 */
-#define	PI_W1_MASK	0x1f00			/* waitcount1 */
-#define	PI_W1_SHIFT	8
-#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
-#define	PI_W2_SHIFT	16
-#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
-#define	PI_W3_SHIFT	24
-
-/* prog_waitcount */
-#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
-#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
-#define	PW_W1_SHIFT	8
-#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
-#define	PW_W2_SHIFT	16
-#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
-#define	PW_W3_SHIFT	24
-
-#define PW_W0       0x0000000c
-#define PW_W1       0x00000a00
-#define PW_W2       0x00020000
-#define PW_W3       0x01000000
-
-/* flash_waitcount */
-#define	FW_W0_MASK	0x1f			/* waitcount0 */
-#define	FW_W1_MASK	0x1f00			/* waitcount1 */
-#define	FW_W1_SHIFT	8
-#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
-#define	FW_W2_SHIFT	16
-#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
-#define	FW_W3_SHIFT	24
-
-/* watchdog */
-#define WATCHDOG_CLOCK	48000000		/* Hz */
-
-/* clockcontrol_n */
-#define	CN_N1_MASK	0x3f			/* n1 control */
-#define	CN_N2_MASK	0x3f00			/* n2 control */
-#define	CN_N2_SHIFT	8
-
-/* clockcontrol_sb/pci/mii */
-#define	CC_M1_MASK	0x3f			/* m1 control */
-#define	CC_M2_MASK	0x3f00			/* m2 control */
-#define	CC_M2_SHIFT	8
-#define	CC_M3_MASK	0x3f0000		/* m3 control */
-#define	CC_M3_SHIFT	16
-#define	CC_MC_MASK	0x1f000000		/* mux control */
-#define	CC_MC_SHIFT	24
-
-/* Clock control default values */
-#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
-#define CC_DEF_100	0x04020011
-#define CC_DEF_33	0x11030011
-#define CC_DEF_25	0x11050011
-
-/* Clock control values for 125Mhz */
-#define	CC_125_N	0x0802
-#define	CC_125_M	0x04020009
-#define	CC_125_M25	0x11090009
-#define	CC_125_M33	0x11090005
-
-/* Clock control magic field values */
-#define	CC_F6_2		0x02			/* A factor of 2 in */
-#define	CC_F6_3		0x03			/*  6-bit fields like */
-#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
-#define	CC_F6_5		0x09
-#define	CC_F6_6		0x11
-#define	CC_F6_7		0x21
-
-#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
-
-#define	CC_MC_BYPASS	0x08
-#define	CC_MC_M1	0x04
-#define	CC_MC_M1M2	0x02
-#define	CC_MC_M1M2M3	0x01
-#define	CC_MC_M1M3	0x11
-
-#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
-
-#endif	/* _SBEXTIF_H */