* adding network config for olpc * adding libertas * config issue * quiet mode for bootloader

SVN-Revision: 9768

1 files changed, 286 insertions, 0 deletions

diff --git a/package/libertas/src/host.h b/package/libertas/src/host.h
new file mode 100644
index 0000000000..64178cff2f
--- /dev/null
+++ b/package/libertas/src/host.h
@@ -0,0 +1,286 @@
+/**
+  * This file contains definitions of WLAN commands.
+  */
+
+#ifndef _LBS_HOST_H_
+#define _LBS_HOST_H_
+
+/** PUBLIC DEFINITIONS */
+#define DEFAULT_AD_HOC_CHANNEL			6
+#define	DEFAULT_AD_HOC_CHANNEL_A		36
+
+/** IEEE 802.11 oids */
+#define OID_802_11_SSID				0x00008002
+#define OID_802_11_INFRASTRUCTURE_MODE		0x00008008
+#define OID_802_11_FRAGMENTATION_THRESHOLD	0x00008009
+#define OID_802_11_RTS_THRESHOLD		0x0000800A
+#define OID_802_11_TX_ANTENNA_SELECTED		0x0000800D
+#define OID_802_11_SUPPORTED_RATES		0x0000800E
+#define OID_802_11_STATISTICS			0x00008012
+#define OID_802_11_TX_RETRYCOUNT		0x0000801D
+#define OID_802_11D_ENABLE			0x00008020
+
+#define CMD_OPTION_WAITFORRSP			0x0002
+
+/** Host command IDs */
+
+/* Return command are almost always the same as the host command, but with
+ * bit 15 set high.  There are a few exceptions, though...
+ */
+#define CMD_RET(cmd)			(0x8000 | cmd)
+
+/* Return command convention exceptions: */
+#define CMD_RET_802_11_ASSOCIATE		0x8012
+
+/* Command codes */
+#define CMD_CODE_DNLD				0x0002
+#define CMD_GET_HW_SPEC				0x0003
+#define	CMD_EEPROM_UPDATE			0x0004
+#define CMD_802_11_RESET			0x0005
+#define	CMD_802_11_SCAN				0x0006
+#define CMD_802_11_GET_LOG			0x000b
+#define CMD_MAC_MULTICAST_ADR			0x0010
+#define CMD_802_11_AUTHENTICATE			0x0011
+#define CMD_802_11_EEPROM_ACCESS		0x0059
+#define CMD_802_11_ASSOCIATE			0x0050
+#define CMD_802_11_SET_WEP			0x0013
+#define CMD_802_11_GET_STAT			0x0014
+#define CMD_802_3_GET_STAT			0x0015
+#define CMD_802_11_SNMP_MIB			0x0016
+#define CMD_MAC_REG_MAP				0x0017
+#define CMD_BBP_REG_MAP				0x0018
+#define CMD_MAC_REG_ACCESS			0x0019
+#define CMD_BBP_REG_ACCESS			0x001a
+#define CMD_RF_REG_ACCESS			0x001b
+#define CMD_802_11_RADIO_CONTROL		0x001c
+#define CMD_802_11_RF_CHANNEL			0x001d
+#define CMD_802_11_RF_TX_POWER			0x001e
+#define CMD_802_11_RSSI				0x001f
+#define CMD_802_11_RF_ANTENNA			0x0020
+#define CMD_802_11_PS_MODE			0x0021
+#define CMD_802_11_DATA_RATE			0x0022
+#define CMD_RF_REG_MAP				0x0023
+#define CMD_802_11_DEAUTHENTICATE		0x0024
+#define CMD_802_11_REASSOCIATE			0x0025
+#define CMD_802_11_DISASSOCIATE			0x0026
+#define CMD_MAC_CONTROL				0x0028
+#define CMD_802_11_AD_HOC_START			0x002b
+#define CMD_802_11_AD_HOC_JOIN			0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS	0x002e
+#define CMD_802_11_ENABLE_RSN			0x002f
+#define CMD_802_11_PAIRWISE_TSC			0x0036
+#define CMD_802_11_GROUP_TSC			0x0037
+#define CMD_802_11_SET_AFC			0x003c
+#define CMD_802_11_GET_AFC			0x003d
+#define CMD_802_11_AD_HOC_STOP			0x0040
+#define CMD_802_11_BEACON_STOP			0x0049
+#define CMD_802_11_MAC_ADDRESS			0x004d
+#define CMD_802_11_LED_GPIO_CTRL		0x004e
+#define CMD_802_11_EEPROM_ACCESS		0x0059
+#define CMD_802_11_BAND_CONFIG			0x0058
+#define CMD_802_11D_DOMAIN_INFO			0x005b
+#define CMD_802_11_KEY_MATERIAL			0x005e
+#define CMD_802_11_SLEEP_PARAMS			0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT		0x0067
+#define CMD_802_11_TPC_CFG			0x0072
+#define CMD_802_11_PWR_CFG			0x0073
+#define CMD_802_11_SUBSCRIBE_EVENT		0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET		0x0076
+#define CMD_802_11_TX_RATE_QUERY		0x007f
+#define	CMD_GET_TSF				0x0080
+#define CMD_BT_ACCESS				0x0087
+#define CMD_FWT_ACCESS				0x0095
+#define CMD_802_11_MONITOR_MODE			0x0098
+#define CMD_MESH_ACCESS				0x009b
+#define CMD_MESH_CONFIG				0x00a3
+#define	CMD_SET_BOOT2_VER			0x00a5
+#define CMD_802_11_BEACON_CTRL			0x00b0
+
+/* For the IEEE Power Save */
+#define CMD_SUBCMD_ENTER_PS		0x0030
+#define CMD_SUBCMD_EXIT_PS		0x0031
+#define CMD_SUBCMD_SLEEP_CONFIRMED	0x0034
+#define CMD_SUBCMD_FULL_POWERDOWN	0x0035
+#define CMD_SUBCMD_FULL_POWERUP		0x0036
+
+#define CMD_ENABLE_RSN			0x0001
+#define CMD_DISABLE_RSN			0x0000
+
+#define CMD_ACT_GET			0x0000
+#define CMD_ACT_SET			0x0001
+#define CMD_ACT_GET_AES			0x0002
+#define CMD_ACT_SET_AES			0x0003
+#define CMD_ACT_REMOVE_AES		0x0004
+
+/* Define action or option for CMD_802_11_SET_WEP */
+#define CMD_ACT_ADD			0x0002
+#define CMD_ACT_REMOVE			0x0004
+#define CMD_ACT_USE_DEFAULT		0x0008
+
+#define CMD_TYPE_WEP_40_BIT		0x01
+#define CMD_TYPE_WEP_104_BIT		0x02
+
+#define CMD_NUM_OF_WEP_KEYS		4
+
+#define CMD_WEP_KEY_INDEX_MASK		0x3fff
+
+/* Define action or option for CMD_802_11_RESET */
+#define CMD_ACT_HALT			0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_BSS_TYPE_BSS		0x0001
+#define CMD_BSS_TYPE_IBSS		0x0002
+#define CMD_BSS_TYPE_ANY		0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_SCAN_TYPE_ACTIVE		0x0000
+#define CMD_SCAN_TYPE_PASSIVE		0x0001
+
+#define CMD_SCAN_RADIO_TYPE_BG		0
+
+#define	CMD_SCAN_PROBE_DELAY_TIME	0
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON			0x0001
+#define CMD_ACT_MAC_TX_ON			0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON			0x0004
+#define CMD_ACT_MAC_WEP_ENABLE			0x0008
+#define CMD_ACT_MAC_INT_ENABLE			0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE		0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE		0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE		0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE	0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE	0x0400
+
+/* Define action or option for CMD_802_11_RADIO_CONTROL */
+#define CMD_TYPE_AUTO_PREAMBLE		0x0001
+#define CMD_TYPE_SHORT_PREAMBLE		0x0002
+#define CMD_TYPE_LONG_PREAMBLE		0x0003
+
+/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
+#define CMD_SUBSCRIBE_RSSI_LOW		0x0001
+#define CMD_SUBSCRIBE_SNR_LOW		0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT		0x0004
+#define CMD_SUBSCRIBE_BCNMISS		0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH		0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH		0x0020
+
+#define TURN_ON_RF			0x01
+#define RADIO_ON			0x01
+#define RADIO_OFF			0x00
+
+#define SET_AUTO_PREAMBLE		0x05
+#define SET_SHORT_PREAMBLE		0x03
+#define SET_LONG_PREAMBLE		0x01
+
+/* Define action or option for CMD_802_11_RF_CHANNEL */
+#define CMD_OPT_802_11_RF_CHANNEL_GET	0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET	0x01
+
+/* Define action or option for CMD_802_11_RF_TX_POWER */
+#define CMD_ACT_TX_POWER_OPT_GET	0x0000
+#define CMD_ACT_TX_POWER_OPT_SET_HIGH	0x8007
+#define CMD_ACT_TX_POWER_OPT_SET_MID	0x8004
+#define CMD_ACT_TX_POWER_OPT_SET_LOW	0x8000
+
+#define CMD_ACT_TX_POWER_INDEX_HIGH	0x0007
+#define CMD_ACT_TX_POWER_INDEX_MID	0x0004
+#define CMD_ACT_TX_POWER_INDEX_LOW	0x0000
+
+/* Define action or option for CMD_802_11_DATA_RATE */
+#define CMD_ACT_SET_TX_AUTO		0x0000
+#define CMD_ACT_SET_TX_FIX_RATE		0x0001
+#define CMD_ACT_GET_TX_RATE		0x0002
+
+#define CMD_ACT_SET_RX			0x0001
+#define	CMD_ACT_SET_TX			0x0002
+#define CMD_ACT_SET_BOTH		0x0003
+#define	CMD_ACT_GET_RX			0x0004
+#define CMD_ACT_GET_TX			0x0008
+#define	CMD_ACT_GET_BOTH		0x000c
+
+/* Define action or option for CMD_802_11_PS_MODE */
+#define CMD_TYPE_CAM			0x0000
+#define	CMD_TYPE_MAX_PSP		0x0001
+#define CMD_TYPE_FAST_PSP		0x0002
+
+/* Define action or option for CMD_BT_ACCESS */
+enum cmd_bt_access_opts {
+	/* The bt commands start at 5 instead of 1 because the old dft commands
+	 * are mapped to 1-4.  These old commands are no longer maintained and
+	 * should not be called.
+	 */
+	CMD_ACT_BT_ACCESS_ADD = 5,
+	CMD_ACT_BT_ACCESS_DEL,
+	CMD_ACT_BT_ACCESS_LIST,
+	CMD_ACT_BT_ACCESS_RESET,
+	CMD_ACT_BT_ACCESS_SET_INVERT,
+	CMD_ACT_BT_ACCESS_GET_INVERT
+};
+
+/* Define action or option for CMD_FWT_ACCESS */
+enum cmd_fwt_access_opts {
+	CMD_ACT_FWT_ACCESS_ADD = 1,
+	CMD_ACT_FWT_ACCESS_DEL,
+	CMD_ACT_FWT_ACCESS_LOOKUP,
+	CMD_ACT_FWT_ACCESS_LIST,
+	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
+	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
+	CMD_ACT_FWT_ACCESS_RESET,
+	CMD_ACT_FWT_ACCESS_CLEANUP,
+	CMD_ACT_FWT_ACCESS_TIME,
+};
+
+/* Define action or option for CMD_MESH_ACCESS */
+enum cmd_mesh_access_opts {
+	CMD_ACT_MESH_GET_TTL = 1,
+	CMD_ACT_MESH_SET_TTL,
+	CMD_ACT_MESH_GET_STATS,
+	CMD_ACT_MESH_GET_ANYCAST,
+	CMD_ACT_MESH_SET_ANYCAST,
+	CMD_ACT_MESH_SET_LINK_COSTS,
+	CMD_ACT_MESH_GET_LINK_COSTS,
+	CMD_ACT_MESH_SET_BCAST_RATE,
+	CMD_ACT_MESH_GET_BCAST_RATE,
+	CMD_ACT_MESH_SET_RREQ_DELAY,
+	CMD_ACT_MESH_GET_RREQ_DELAY,
+	CMD_ACT_MESH_SET_ROUTE_EXP,
+	CMD_ACT_MESH_GET_ROUTE_EXP,
+	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
+	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
+};
+
+/** Card Event definition */
+#define MACREG_INT_CODE_TX_PPA_FREE		0
+#define MACREG_INT_CODE_TX_DMA_DONE		1
+#define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
+#define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
+#define MACREG_INT_CODE_LINK_SENSED		4
+#define MACREG_INT_CODE_CMD_FINISHED		5
+#define MACREG_INT_CODE_MIB_CHANGED		6
+#define MACREG_INT_CODE_INIT_DONE		7
+#define MACREG_INT_CODE_DEAUTHENTICATED		8
+#define MACREG_INT_CODE_DISASSOCIATED		9
+#define MACREG_INT_CODE_PS_AWAKE		10
+#define MACREG_INT_CODE_PS_SLEEP		11
+#define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
+#define MACREG_INT_CODE_MIC_ERR_UNICAST		14
+#define MACREG_INT_CODE_WM_AWAKE		15
+#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
+#define MACREG_INT_CODE_ADHOC_BCN_LOST		17
+#define MACREG_INT_CODE_HOST_AWAKE		18
+#define MACREG_INT_CODE_STOP_TX			19
+#define MACREG_INT_CODE_START_TX		20
+#define MACREG_INT_CODE_CHANNEL_SWITCH		21
+#define MACREG_INT_CODE_MEASUREMENT_RDY		22
+#define MACREG_INT_CODE_WMM_CHANGE		23
+#define MACREG_INT_CODE_BG_SCAN_REPORT		24
+#define MACREG_INT_CODE_RSSI_LOW		25
+#define MACREG_INT_CODE_SNR_LOW			26
+#define MACREG_INT_CODE_MAX_FAIL		27
+#define MACREG_INT_CODE_RSSI_HIGH		28
+#define MACREG_INT_CODE_SNR_HIGH		29
+#define MACREG_INT_CODE_MESH_AUTO_STARTED	35
+#define MACREG_INT_CODE_FIRMWARE_READY		48
+
+#endif