mac80211: rename b43 patches to make more space

Just 6 patches were using 80*, 81*, 82* and 84* prefixes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 0 insertions, 131 deletions

diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
deleted file mode 100644
index f8f555f3e6..0000000000
--- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch
+++ /dev/null
@@ -1,131 +0,0 @@
---- a/drivers/net/wireless/broadcom/b43/main.c
-+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st
- 				  len, ram_offset, shm_size_offset, rate);
- 
- 	/* Write the PHY TX control parameters. */
--	antenna = B43_ANTENNA_DEFAULT;
-+	antenna = dev->tx_antenna;
- 	antenna = b43_antenna_to_phyctl(antenna);
- 	ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
- 	/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3297,8 +3297,8 @@ static int b43_chip_init(struct b43_wlde
- 
- 	/* Select the antennae */
- 	if (phy->ops->set_rx_antenna)
--		phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
--	b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
-+		phy->ops->set_rx_antenna(dev, dev->rx_antenna);
-+	b43_mgmtframe_txantenna(dev, dev->tx_antenna);
- 
- 	if (phy->type == B43_PHYTYPE_B) {
- 		value16 = b43_read16(dev, 0x005E);
-@@ -3998,7 +3998,6 @@ static int b43_op_config(struct ieee8021
- 	struct b43_wldev *dev = wl->current_dev;
- 	struct b43_phy *phy = &dev->phy;
- 	struct ieee80211_conf *conf = &hw->conf;
--	int antenna;
- 	int err = 0;
- 
- 	mutex_lock(&wl->mutex);
-@@ -4041,11 +4040,9 @@ static int b43_op_config(struct ieee8021
- 	}
- 
- 	/* Antennas for RX and management frame TX. */
--	antenna = B43_ANTENNA_DEFAULT;
--	b43_mgmtframe_txantenna(dev, antenna);
--	antenna = B43_ANTENNA_DEFAULT;
-+	b43_mgmtframe_txantenna(dev, dev->tx_antenna);
- 	if (phy->ops->set_rx_antenna)
--		phy->ops->set_rx_antenna(dev, antenna);
-+		phy->ops->set_rx_antenna(dev, dev->rx_antenna);
- 
- 	if (wl->radio_enabled != phy->radio_on) {
- 		if (wl->radio_enabled) {
-@@ -5189,6 +5186,47 @@ static int b43_op_get_survey(struct ieee
- 	return 0;
- }
- 
-+static int b43_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
-+{
-+	struct b43_wl *wl = hw_to_b43_wl(hw);
-+	struct b43_wldev *dev = wl->current_dev;
-+
-+	if (tx_ant == 1 && rx_ant == 1) {
-+		dev->tx_antenna = B43_ANTENNA0;
-+		dev->rx_antenna = B43_ANTENNA0;
-+	}
-+	else if (tx_ant == 2 && rx_ant == 2) {
-+		dev->tx_antenna = B43_ANTENNA1;
-+		dev->rx_antenna = B43_ANTENNA1;
-+	}
-+	else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) {
-+		dev->tx_antenna = B43_ANTENNA_DEFAULT;
-+		dev->rx_antenna = B43_ANTENNA_DEFAULT;
-+	}
-+	else {
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static int b43_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
-+{
-+	struct b43_wl *wl = hw_to_b43_wl(hw);
-+	struct b43_wldev *dev = wl->current_dev;
-+
-+	switch (dev->tx_antenna) {
-+	case B43_ANTENNA0:
-+		*tx_ant = 1; *rx_ant = 1; break;
-+	case B43_ANTENNA1:
-+		*tx_ant = 2; *rx_ant = 2; break;
-+	case B43_ANTENNA_DEFAULT:
-+		*tx_ant = 3; *rx_ant = 3; break;
-+	}
-+	return 0;
-+}
-+
- static const struct ieee80211_ops b43_hw_ops = {
- 	.tx			= b43_op_tx,
- 	.conf_tx		= b43_op_conf_tx,
-@@ -5210,6 +5248,8 @@ static const struct ieee80211_ops b43_hw
- 	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
- 	.get_survey		= b43_op_get_survey,
- 	.rfkill_poll		= b43_rfkill_poll,
-+	.set_antenna		= b43_op_set_antenna,
-+	.get_antenna		= b43_op_get_antenna,
- };
- 
- /* Hard-reset the chip. Do not call this directly.
-@@ -5513,6 +5553,8 @@ static int b43_one_core_attach(struct b4
- 	if (!wldev)
- 		goto out;
- 
-+	wldev->rx_antenna = B43_ANTENNA_DEFAULT;
-+	wldev->tx_antenna = B43_ANTENNA_DEFAULT;
- 	wldev->use_pio = b43_modparam_pio;
- 	wldev->dev = dev;
- 	wldev->wl = wl;
-@@ -5603,6 +5645,9 @@ static struct b43_wl *b43_wireless_init(
- 
- 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
- 
-+	hw->wiphy->available_antennas_rx = 0x3;
-+	hw->wiphy->available_antennas_tx = 0x3;
-+
- 	wl->hw_registred = false;
- 	hw->max_rates = 2;
- 	SET_IEEE80211_DEV(hw, dev->dev);
---- a/drivers/net/wireless/broadcom/b43/b43.h
-+++ b/drivers/net/wireless/broadcom/b43/b43.h
-@@ -840,6 +840,8 @@ struct b43_wldev {
- 	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
- 	bool use_pio;			/* TRUE if next init should use PIO */
- 	int gpiomask;			/* GPIO LED mask as a module parameter */
-+	int rx_antenna;			/* Used RX antenna (B43_ANTENNAxxx) */
-+	int tx_antenna;			/* Used TX antenna (B43_ANTENNAxxx) */
- 
- 	/* PHY/Radio device. */
- 	struct b43_phy phy;