mac80211: update to version 2015-06-22

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46198

1 files changed, 0 insertions, 137 deletions

diff --git a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch b/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
deleted file mode 100644
index 4cfa53f6c0..0000000000
--- a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
-Date: Wed, 4 Mar 2015 05:12:10 +0300
-Subject: [PATCH] ath5k: channel change fix
-
-ath5k updates the channel pointer and after that it stops the Rx logic
-and apply channel to HW. In case of channel switch, such sequence
-creates a small window when a frame, which is received on the old
-channel is considered as a frame received on the new one.
-
-The most notable consequence of this situation occurs during the switch
-from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received
-with CCK rate, e.g. beacon received at the 1mbps, causes the following
-warning:
-
-  WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]()
-  invalid hw_rix: 1a
-  [..]
-  Call Trace:
-  [<802656a8>] show_stack+0x48/0x70
-  [<802dd92c>] warn_slowpath_common+0x88/0xbc
-  [<802dd98c>] warn_slowpath_fmt+0x2c/0x38
-  [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k]
-  [<8028ac64>] tasklet_action+0x8c/0xf0
-  [<80075804>] __do_softirq+0x180/0x32c
-  [<80196ce8>] irq_exit+0x54/0x70
-  [<80041848>] ret_from_irq+0x0/0x4
-  [<80182fdc>] ioread32+0x4/0xc
-  [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k]
-  [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k]
-  [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k]
-  [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k]
-  [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211]
-  [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211]
-  [<8022c3f4>] process_one_work+0x28c/0x400
-  [<802df8f8>] worker_thread+0x258/0x3c0
-  [<801b5710>] kthread+0xe0/0xec
-  [<800418a8>] ret_from_kernel_thread+0x14/0x1c
-
-The easiest way to reproduce this warning is to run scan with dualband
-NIC in noisy environments, when the channel 11 runs multiple APs. In my
-tests if the APs num >= 12, the warning appears in the first few
-seconds of scanning.
-
-In order to fix this, the Rx disable code moved to a higher level and
-placed before the channel pointer update. This is also makes the code a
-bit more symmetrical, since we disable and enable the Rx in the same
-function.
-
-In fact, at the pointer update time new frames should not appear,
-because interrupt generation at this point should already be disabled.
-The next patch should address this issue.
-
-CC: Jiri Slaby <jirislaby@gmail.com>
-CC: Nick Kossifidis <mickflemm@gmail.com>
-CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
-Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com>
-Tested-by: Eric Bree <ebree@nltinc.com>
-Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath5k/base.c
-+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -2858,7 +2858,7 @@ ath5k_reset(struct ath5k_hw *ah, struct
- {
- 	struct ath_common *common = ath5k_hw_common(ah);
- 	int ret, ani_mode;
--	bool fast;
-+	bool fast = chan && modparam_fastchanswitch ? 1 : 0;
- 
- 	ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
- 
-@@ -2876,11 +2876,29 @@ ath5k_reset(struct ath5k_hw *ah, struct
- 	 * so we should also free any remaining
- 	 * tx buffers */
- 	ath5k_drain_tx_buffs(ah);
-+
-+	/* Stop PCU */
-+	ath5k_hw_stop_rx_pcu(ah);
-+
-+	/* Stop DMA
-+	 *
-+	 * Note: If DMA didn't stop continue
-+	 * since only a reset will fix it.
-+	 */
-+	ret = ath5k_hw_dma_stop(ah);
-+
-+	/* RF Bus grant won't work if we have pending
-+	 * frames
-+	 */
-+	if (ret && fast) {
-+		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
-+			  "DMA didn't stop, falling back to normal reset\n");
-+		fast = false;
-+	}
-+
- 	if (chan)
- 		ah->curchan = chan;
- 
--	fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
--
- 	ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
- 	if (ret) {
- 		ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
---- a/drivers/net/wireless/ath/ath5k/reset.c
-+++ b/drivers/net/wireless/ath/ath5k/reset.c
-@@ -1169,30 +1169,6 @@ ath5k_hw_reset(struct ath5k_hw *ah, enum
- 	if (ah->ah_version == AR5K_AR5212)
- 		ath5k_hw_set_sleep_clock(ah, false);
- 
--	/*
--	 * Stop PCU
--	 */
--	ath5k_hw_stop_rx_pcu(ah);
--
--	/*
--	 * Stop DMA
--	 *
--	 * Note: If DMA didn't stop continue
--	 * since only a reset will fix it.
--	 */
--	ret = ath5k_hw_dma_stop(ah);
--
--	/* RF Bus grant won't work if we have pending
--	 * frames */
--	if (ret && fast) {
--		ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
--			"DMA didn't stop, falling back to normal reset\n");
--		fast = false;
--		/* Non fatal, just continue with
--		 * normal reset */
--		ret = 0;
--	}
--
- 	mode = channel->hw_value;
- 	switch (mode) {
- 	case AR5K_MODE_11A: