diff options
| author | Sven Eckelmann <sven.eckelmann@openmesh.com> | 2018-01-30 09:41:45 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-06-09 16:32:39 +0200 |
| commit | 4270847a2c2b8e4b890de16b51bd2e50c64077d2 (patch) | |
| tree | a0c25cb4c6abadf950183f0266e353f74c1b34aa /package/kernel/mac80211/Makefile | |
| parent | eee8ab59dc8bc4c599b3508201349fdd96463e69 (diff) | |
| download | upstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.tar.gz upstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.tar.bz2 upstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.zip | |
mac80211: ath10k: Allow to enable the thermal code of ath10k
Some ath10k firmware versions allow to access the chip internal a
temperature sensor and allow to reduce the amount of the time when the card
is allowed to send. The latter is required on devices which tend to
overheat.
An userspace service has to read
/sys/class/ieee80211/phy*/device/hwmon/hwmon*/temp1_input regularly and
then decide how much the device has to be throttled. This can be done by
writing to /sys/class/ieee80211/phy*/device/cooling_device/cur_state. By
default it is not throttled (0) but it can be throttled up to 100(%).
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Diffstat (limited to 'package/kernel/mac80211/Makefile')
| -rw-r--r-- | package/kernel/mac80211/Makefile | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index 5666850eea..127251d749 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -74,6 +74,7 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ CONFIG_ATH9K_SUPPORT_PCOEM \ CONFIG_ATH9K_TX99 \ + CONFIG_ATH10K_THERMAL \ CONFIG_ATH_USER_REGD \ include $(INCLUDE_DIR)/package.mk @@ -325,7 +326,8 @@ define KernelPackage/ath10k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11ac wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k - DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT + DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \ + +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko @@ -338,6 +340,14 @@ Atheros IEEE 802.11ac family of chipsets. For now only PCI is supported. endef +define KernelPackage/ath10k/config + + config ATH10K_THERMAL + bool "Enable thermal sensors and throttling support" + depends on PACKAGE_kmod-ath10k + +endef + #Broadcom firmware ifneq ($(CONFIG_B43_FW_6_30),) PKG_B43_FWV4_NAME:=broadcom-wl @@ -1625,6 +1635,7 @@ config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR +config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL config-$(call config_package,ath9k-htc) += ATH9K_HTC config-$(call config_package,ath10k) += ATH10K ATH10K_PCI |