aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mac80211/Makefile
diff options
context:
space:
mode:
authorSven Eckelmann <sven.eckelmann@openmesh.com>2018-01-30 09:41:45 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2018-06-09 16:32:39 +0200
commit4270847a2c2b8e4b890de16b51bd2e50c64077d2 (patch)
treea0c25cb4c6abadf950183f0266e353f74c1b34aa /package/kernel/mac80211/Makefile
parenteee8ab59dc8bc4c599b3508201349fdd96463e69 (diff)
downloadupstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.tar.gz
upstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.tar.bz2
upstream-4270847a2c2b8e4b890de16b51bd2e50c64077d2.zip
mac80211: ath10k: Allow to enable the thermal code of ath10k
Some ath10k firmware versions allow to access the chip internal a temperature sensor and allow to reduce the amount of the time when the card is allowed to send. The latter is required on devices which tend to overheat. An userspace service has to read /sys/class/ieee80211/phy*/device/hwmon/hwmon*/temp1_input regularly and then decide how much the device has to be throttled. This can be done by writing to /sys/class/ieee80211/phy*/device/cooling_device/cur_state. By default it is not throttled (0) but it can be throttled up to 100(%). Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Diffstat (limited to 'package/kernel/mac80211/Makefile')
-rw-r--r--package/kernel/mac80211/Makefile13
1 files changed, 12 insertions, 1 deletions
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index 5666850eea..127251d749 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -74,6 +74,7 @@ PKG_CONFIG_DEPENDS:= \
CONFIG_PACKAGE_RTLWIFI_DEBUG \
CONFIG_ATH9K_SUPPORT_PCOEM \
CONFIG_ATH9K_TX99 \
+ CONFIG_ATH10K_THERMAL \
CONFIG_ATH_USER_REGD \
include $(INCLUDE_DIR)/package.mk
@@ -325,7 +326,8 @@ define KernelPackage/ath10k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11ac wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k
- DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT
+ DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \
+ +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
@@ -338,6 +340,14 @@ Atheros IEEE 802.11ac family of chipsets. For now only
PCI is supported.
endef
+define KernelPackage/ath10k/config
+
+ config ATH10K_THERMAL
+ bool "Enable thermal sensors and throttling support"
+ depends on PACKAGE_kmod-ath10k
+
+endef
+
#Broadcom firmware
ifneq ($(CONFIG_B43_FW_6_30),)
PKG_B43_FWV4_NAME:=broadcom-wl
@@ -1625,6 +1635,7 @@ config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD
config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM
config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99
config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR
+config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
config-$(call config_package,ath9k-htc) += ATH9K_HTC
config-$(call config_package,ath10k) += ATH10K ATH10K_PCI