packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

4 files changed, 1440 insertions, 0 deletions

diff --git a/package/kernel/broadcom-wl/src/glue/Makefile b/package/kernel/broadcom-wl/src/glue/Makefile
new file mode 100644
index 0000000000..81f0c8acfd
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for wl_glue driver
+#
+# Copyright (C) 2011 Jo-Philipp Wich <jow@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+
+obj-m := wl_glue.o
+
+ifeq ($(MAKING_MODULES),1)
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/package/kernel/broadcom-wl/src/glue/wl_glue.c b/package/kernel/broadcom-wl/src/glue/wl_glue.c
new file mode 100644
index 0000000000..fc94ac0b25
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/wl_glue.c
@@ -0,0 +1,315 @@
+/*
+ * wl_glue.c: Broadcom WL support module providing a unified SSB/BCMA handling.
+ * Copyright (C) 2011 Jo-Philipp Wich <jow@openwrt.org>
+ */
+
+#include "wl_glue.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx.h>
+#endif
+
+#ifdef CONFIG_SSB
+#include <linux/ssb/ssb.h>
+#endif
+
+#ifdef CONFIG_BCMA
+#include <linux/bcma/bcma.h>
+#endif
+
+MODULE_AUTHOR("Jo-Philipp Wich (jow@openwrt.org)");
+MODULE_DESCRIPTION("Broadcom WL SSB/BCMA compatibility layer");
+MODULE_LICENSE("GPL");
+
+static wl_glue_attach_cb_t attach_cb = NULL;
+static wl_glue_remove_cb_t remove_cb = NULL;
+static enum wl_glue_bus_type active_bus_type = WL_GLUE_BUS_TYPE_UNSPEC;
+static int wl_glue_attached = 0;
+
+
+#ifdef CONFIG_SSB
+static int wl_glue_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
+{
+	void *mmio;
+	void *wldev;
+
+	if (!attach_cb)
+	{
+		pr_err("No attach callback registered\n");
+		return -ENOSYS;
+	}
+
+	if (dev->bus->bustype != SSB_BUSTYPE_SSB)
+	{
+		pr_err("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
+		return -EINVAL;
+	}
+
+	mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
+	wldev = attach_cb(id->vendor, id->coreid, (ulong)mmio, dev, dev->irq);
+
+	if (!wldev)
+	{
+		pr_err("The attach callback failed, SSB probe aborted\n");
+		return -ENODEV;
+	}
+
+	ssb_set_drvdata(dev, wldev);
+	return 0;
+}
+
+static void wl_glue_ssb_remove(struct ssb_device *dev)
+{
+	void *wldev = ssb_get_drvdata(dev);
+
+	if (remove_cb)
+		remove_cb(wldev);
+
+	ssb_set_drvdata(dev, NULL);
+}
+
+static const struct ssb_device_id wl_glue_ssb_tbl[] = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
+	SSB_DEVTABLE_END
+};
+
+static struct ssb_driver wl_glue_ssb_driver = {
+	.name     = KBUILD_MODNAME,
+	.id_table = wl_glue_ssb_tbl,
+	.probe    = wl_glue_ssb_probe,
+	.remove   = wl_glue_ssb_remove,
+};
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+static int wl_glue_bcma_probe(struct bcma_device *dev)
+{
+	void *wldev;
+
+	if (!attach_cb)
+	{
+		pr_err("No attach callback registered\n");
+		return -ENOSYS;
+	}
+
+	if (dev->bus->hosttype != BCMA_HOSTTYPE_SOC)
+	{
+		pr_err("Unsupported BCMA bus type %d\n", dev->bus->hosttype);
+		return -EINVAL;
+	}
+
+	/*
+	 * NB:
+	 * 0x18000000 = BCMA_ADDR_BASE
+	 * 0x1000     = BCMA_CORE_SIZE
+	 */
+
+	wldev = attach_cb(dev->id.manuf, dev->id.id, (ulong)dev->addr, dev, dev->irq);
+
+	if (!wldev)
+	{
+		pr_err("The attach callback failed, BCMA probe aborted\n");
+		return -ENODEV;
+	}
+
+	bcma_set_drvdata(dev, wldev);
+	return 0;
+}
+
+static void wl_glue_bcma_remove(struct bcma_device *dev)
+{
+	void *wldev = bcma_get_drvdata(dev);
+
+	if (remove_cb)
+		remove_cb(wldev);
+
+	bcma_set_drvdata(dev, NULL);
+}
+
+static const struct bcma_device_id wl_glue_bcma_tbl[] = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORETABLE_END
+};
+
+static struct bcma_driver wl_glue_bcma_driver = {
+	.name     = KBUILD_MODNAME,
+	.id_table = wl_glue_bcma_tbl,
+	.probe    = wl_glue_bcma_probe,
+	.remove   = wl_glue_bcma_remove,
+};
+#endif /* CONFIG_BCMA */
+
+
+void wl_glue_set_attach_callback(wl_glue_attach_cb_t cb)
+{
+	attach_cb = cb;
+}
+EXPORT_SYMBOL(wl_glue_set_attach_callback);
+
+void wl_glue_set_remove_callback(wl_glue_remove_cb_t cb)
+{
+	remove_cb = cb;
+}
+EXPORT_SYMBOL(wl_glue_set_remove_callback);
+
+int wl_glue_register(void)
+{
+	int err;
+
+	switch(active_bus_type)
+	{
+#ifdef CONFIG_SSB
+	case WL_GLUE_BUS_TYPE_SSB:
+		err = ssb_driver_register(&wl_glue_ssb_driver);
+		break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+	case WL_GLUE_BUS_TYPE_BCMA:
+		err = bcma_driver_register(&wl_glue_bcma_driver);
+		break;
+#endif /* CONFIG_BCMA */
+
+	default:
+		pr_err("Not attaching through glue driver due to unsupported bus\n");
+		err = -ENOSYS;
+		break;
+	}
+
+	if (!err)
+	{
+		pr_info("SSB/BCMA glue driver successfully attached\n");
+		wl_glue_attached = 1;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(wl_glue_register);
+
+int wl_glue_unregister(void)
+{
+	int err;
+
+	if (!wl_glue_attached)
+		return -ENOSYS;
+
+	switch (active_bus_type)
+	{
+#ifdef CONFIG_SSB
+	case WL_GLUE_BUS_TYPE_SSB:
+		ssb_driver_unregister(&wl_glue_ssb_driver);
+		err = 0;
+		break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+	case WL_GLUE_BUS_TYPE_BCMA:
+		bcma_driver_unregister(&wl_glue_bcma_driver);
+		err = 0;
+		break;
+#endif /* CONFIG_BCMA */
+
+	default:
+		pr_err("Not removing glue driver due to unsupported bus\n");
+		err = -ENOSYS;
+		break;
+	}
+
+	if (!err)
+	{
+		pr_info("SSB/BCMA glue driver successfully detached\n");
+		wl_glue_attached = 0;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(wl_glue_unregister);
+
+struct device * wl_glue_get_dmadev(void *dev)
+{
+	struct device *dma_dev;
+
+	switch (active_bus_type)
+	{
+#ifdef CONFIG_SSB
+	case WL_GLUE_BUS_TYPE_SSB:
+		dma_dev = ((struct ssb_device *)dev)->dma_dev;
+		break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+	case WL_GLUE_BUS_TYPE_BCMA:
+		dma_dev = ((struct bcma_device *)dev)->dma_dev;
+		break;
+#endif /* CONFIG_BCMA */
+
+	default:
+		BUG();
+		dma_dev = NULL;
+		break;
+	}
+
+	return dma_dev;
+}
+EXPORT_SYMBOL(wl_glue_get_dmadev);
+
+
+static int __init wl_glue_init(void)
+{
+#ifdef CONFIG_BCM47XX
+	/*
+	 * BCM47xx currently supports either SSB or BCMA bus,
+	 * determine the used one from the info set by the
+	 * platform setup code.
+	 */
+	switch (bcm47xx_bus_type)
+	{
+#ifdef CONFIG_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		active_bus_type = WL_GLUE_BUS_TYPE_SSB;
+		break;
+#endif /* CONFIG_SSB */
+
+#ifdef CONFIG_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		active_bus_type = WL_GLUE_BUS_TYPE_BCMA;
+		break;
+#endif /* CONFIG_BCMA */
+	}
+#endif /* CONFIG_BCM47XX */
+
+#ifdef CONFIG_BCM63XX
+#ifdef CONFIG_SSB
+	/*
+	 * BCM63xx currently only uses SSB, so assume that.
+	 */
+	active_bus_type = WL_GLUE_BUS_TYPE_SSB;
+#endif /* CONFIG_SSB */
+#endif /* CONFIG_BCM63XX */
+
+	/* do not fail here, let wl_glue_register() return -ENOSYS later */
+	if (active_bus_type == WL_GLUE_BUS_TYPE_UNSPEC)
+		pr_err("Unable to determine used system bus type\n");
+
+	return 0;
+}
+
+static void __exit wl_glue_exit(void)
+{
+	if (wl_glue_attached)
+	{
+		if (wl_glue_unregister())
+			pr_err("Failed to unregister glue driver\n");
+
+		wl_glue_attached = 0;
+	}
+
+	return;
+}
+
+module_init(wl_glue_init);
+module_exit(wl_glue_exit);
diff --git a/package/kernel/broadcom-wl/src/glue/wl_glue.h b/package/kernel/broadcom-wl/src/glue/wl_glue.h
new file mode 100644
index 0000000000..b3c8aa3b6a
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/glue/wl_glue.h
@@ -0,0 +1,22 @@
+/*
+ * wl_glue.h: Broadcom WL support module providing a unified SSB/BCMA handling.
+ * Copyright (C) 2011 Jo-Philipp Wich <jow@openwrt.org>
+ */
+
+#include <linux/types.h>
+
+typedef void * (*wl_glue_attach_cb_t)(u16, u16, ulong, void *, u32);
+typedef void (*wl_glue_remove_cb_t)(void *);
+
+enum wl_glue_bus_type {
+	WL_GLUE_BUS_TYPE_UNSPEC,
+	WL_GLUE_BUS_TYPE_SSB,
+	WL_GLUE_BUS_TYPE_BCMA
+};
+
+extern void wl_glue_set_attach_callback(wl_glue_attach_cb_t cb);
+extern void wl_glue_set_remove_callback(wl_glue_remove_cb_t cb);
+extern int wl_glue_register(void);
+extern int wl_glue_unregister(void);
+extern struct device * wl_glue_get_dmadev(void *);
+
diff --git a/package/kernel/broadcom-wl/src/wlc.c b/package/kernel/broadcom-wl/src/wlc.c
new file mode 100644
index 0000000000..253809c9a3
--- /dev/null
+++ b/package/kernel/broadcom-wl/src/wlc.c
@@ -0,0 +1,1086 @@
+/*
+ * wlc - Broadcom Wireless Driver Control Utility
+ *
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <glob.h>
+#include <ctype.h>
+
+#include <typedefs.h>
+#include <wlutils.h>
+#include <proto/802.11.h>
+
+#define VERSION "0.1"
+#define BUFSIZE 8192
+#define PTABLE_MAGIC 0xbadc0ded
+#define PTABLE_SLT1 1
+#define PTABLE_SLT2 2
+#define PTABLE_ACKW 3
+#define PTABLE_ADHM 4
+#define PTABLE_END 0xffffffff
+
+/* 
+ * Copy each token in wordlist delimited by space into word 
+ * Taken from Broadcom shutils.h
+ */
+#define foreach(word, wordlist, next) \
+	for (next = &wordlist[strspn(wordlist, " ")], \
+		 strncpy(word, next, sizeof(word)), \
+		 word[strcspn(word, " ")] = '\0', \
+		 word[sizeof(word) - 1] = '\0', \
+		 next = strchr(next, ' '); \
+		 strlen(word); \
+		 next = next ? &next[strspn(next, " ")] : "", \
+		 strncpy(word, next, sizeof(word)), \
+		 word[strcspn(word, " ")] = '\0', \
+		 word[sizeof(word) - 1] = '\0', \
+		 next = strchr(next, ' '))
+
+static char wlbuf[8192];
+static char interface[16] = "wl0";
+static unsigned long kmem_offset = 0;
+static int vif = 0, debug = 1, fromstdin = 0;
+
+typedef enum {
+	NONE =   0x00,
+
+	/* types */
+	PARAM_TYPE =    0x00f,
+	INT =    0x001,
+	STRING = 0x002,
+	MAC =    0x003,
+
+	/* options */
+	PARAM_OPTIONS = 0x0f0,
+	NOARG =  0x010,
+
+	/* modes */
+	PARAM_MODE =    0xf00,
+	GET =    0x100,
+	SET =    0x200,
+} wlc_param;
+
+struct wlc_call {
+	const char *name;
+	wlc_param param;
+	int (*handler)(wlc_param param, void *data, void *value);
+	union {
+		int num;
+		char *str;
+		void *ptr;
+	} data;
+	const char *desc;
+};
+
+/* can't use the system include because of the stupid broadcom header files */
+extern struct ether_addr *ether_aton(const char *asc);
+static inline int my_ether_ntoa(unsigned char *ea, char *buf)
+{
+	return sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+		ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
+}
+
+static int wlc_ioctl(wlc_param param, void *data, void *value)
+{
+	unsigned int *var = ((unsigned int *) data);
+	unsigned int ioc = *var;
+
+	if (param & NOARG) {
+		return wl_ioctl(interface, ioc, NULL, 0);
+	}
+	switch(param & PARAM_TYPE) {
+		case MAC:
+			return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, 6);
+		case INT:
+			return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, sizeof(int));
+		case STRING:
+			return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, BUFSIZE);
+	}
+	return 0;
+}
+
+static int wlc_iovar(wlc_param param, void *data, void *value)
+{
+	int *val = (int *) value;
+	char *iov = *((char **) data);
+	int ret = 0;
+	
+	if (param & SET) {
+		switch(param & PARAM_TYPE) {
+			case INT:
+				ret = wl_iovar_setint(interface, iov, *val);
+				break;
+			case MAC:
+				ret = wl_iovar_set(interface, iov, value, 6);
+				break;
+		}
+	}
+	if (param & GET) {
+		switch(param & PARAM_TYPE) {
+			case INT:
+				ret = wl_iovar_get(interface, iov, val, sizeof(int));
+				break;
+			case MAC:
+				ret = wl_iovar_get(interface, iov, value, 6);
+				break;
+		}
+	}
+
+	return ret;
+}
+
+static int wlc_bssiovar(wlc_param param, void *data, void *value)
+{
+	int *val = (int *) value;
+	char *iov = *((char **) data);
+	int ret = 0;
+	
+	if (param & SET) {
+		switch(param & PARAM_TYPE) {
+			case INT:
+				ret = wl_bssiovar_setint(interface, iov, vif, *val);
+		}
+	}
+	if (param & GET) {
+		switch(param & PARAM_TYPE) {
+			case INT:
+				ret = wl_bssiovar_get(interface, iov, vif, val, sizeof(int));
+		}
+	}
+
+	return ret;
+}
+
+static int wlc_vif_enabled(wlc_param param, void *data, void *value)
+{
+	int *val = (int *) value;
+	int buf[3];
+	int ret = 0;
+	
+	sprintf((char *) buf, "bss");
+	buf[1] = vif;
+	if (param & SET) {
+		buf[2] = (*val ? 1 : 0);
+		ret = wl_ioctl(interface, WLC_SET_VAR, buf, sizeof(buf));
+	} else if (param & GET) {
+		ret = wl_ioctl(interface, WLC_GET_VAR, buf, sizeof(buf));
+		*val = buf[0];
+	}
+
+	return ret;
+}
+
+static int wlc_ssid(wlc_param param, void *data, void *value)
+{
+	int ret = -1, ret2 = -1;
+	char *dest = (char *) value;
+	wlc_ssid_t ssid;
+	
+	if ((param & PARAM_MODE) == GET) {
+		ret = wl_bssiovar_get(interface, "ssid", vif, &ssid, sizeof(ssid));
+
+		if (ret)
+			/* if we can't get the ssid through the bssiovar, try WLC_GET_SSID */
+			ret = wl_ioctl(interface, WLC_GET_SSID, &ssid, sizeof(ssid));
+		
+		if (!ret) {
+			memcpy(dest, ssid.SSID, ssid.SSID_len);
+			dest[ssid.SSID_len] = 0;
+		}
+	} else if ((param & PARAM_MODE) == SET) {
+		strncpy(ssid.SSID, value, 32);
+		ssid.SSID_len = strlen(value);
+		
+		if (ssid.SSID_len > 32)
+			ssid.SSID_len = 32;
+		
+		if (vif == 0) {
+			/* for the main interface, also try the WLC_SET_SSID call */
+			ret2 = wl_ioctl(interface, WLC_SET_SSID, &ssid, sizeof(ssid));
+		}
+		
+		ret = wl_bssiovar_set(interface, "ssid", vif, &ssid, sizeof(ssid));
+		ret = (!ret2 ? 0 : ret);
+	}
+	
+	return ret;
+}
+
+static int wlc_int(wlc_param param, void *data, void *value)
+{
+	int *var = *((int **) data);
+	int *val = (int *) value;
+
+	if ((param & PARAM_MODE) == SET) {
+		*var = *val;
+	} else if ((param & PARAM_MODE) == GET) {
+		*val = *var;
+	}
+
+	return 0;
+}
+
+static int wlc_flag(wlc_param param, void *data, void *value)
+{
+	int *var = *((int **) data);
+
+	*var = 1;
+
+	return 0;
+}
+
+static int wlc_string(wlc_param param, void *data, void *value)
+{
+	char *var = *((char **) data);
+	
+	if ((param & PARAM_MODE) == GET) {
+		strcpy(value, var);
+	}
+
+	return 0;
+}
+
+static int wlc_afterburner(wlc_param param, void *data, void *value)
+{
+	int *val = (int *) value;
+	int ret = 0;
+
+	if ((param & PARAM_MODE) == GET) {
+		ret = wl_iovar_get(interface, "afterburner", val, sizeof(int));
+	} else {
+		wl_iovar_setint(interface, "wlfeatureflag", (*val ? 3 : 0));
+		ret = wl_iovar_setint(interface, "afterburner", (*val ? 1 : 0));
+		wl_iovar_setint(interface, "afterburner_override", *val);
+	}
+
+	return ret;
+}
+
+static int wlc_maclist(wlc_param param, void *data, void *value)
+{
+	unsigned int *var = ((unsigned int *) data);
+	unsigned int ioc = *var;
+	int limit = (sizeof(wlbuf) - 4) / sizeof(struct ether_addr);
+	struct maclist *list = (struct maclist *) wlbuf;
+	char *str = (char *) value;
+	char astr[30], *p;
+	struct ether_addr *addr;
+	int isset = 0;
+	int ret;
+
+	if ((param & PARAM_MODE) == GET) {
+		list->count = limit;
+		ret = wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf));
+		
+		if (!ret) 
+			while (list->count) {
+				str += sprintf(str, "%s", ((((char *) value) == str) ? "" : " "));
+				str += my_ether_ntoa((unsigned char *) &list->ea[list->count-- - 1], str);
+			}
+		
+		return ret;
+	} else {
+		while (*str && isspace(*str))
+			*str++;
+		
+		if (*str == '+') {
+			str++;
+
+			list->count = limit;
+			if (wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf)) == 0)
+				isset = 1;
+
+			while (*str && isspace(*str))
+				str++;
+		}
+		
+		if (!isset)
+			memset(wlbuf, 0, sizeof(wlbuf));
+		
+		foreach(astr, str, p) {
+			if (list->count >= limit)
+				break;
+			
+			if ((addr = ether_aton(astr)) != NULL)
+				memcpy(&list->ea[list->count++], addr, sizeof(struct ether_addr));
+		}
+
+		return wl_ioctl(interface, ioc & 0xffff, wlbuf, sizeof(wlbuf));
+	}
+}
+
+static int wlc_radio(wlc_param param, void *data, void *value)
+{
+	int *val = (int *) value;
+	int ret;
+
+	if ((param & PARAM_MODE) == GET) {
+		ret = wl_ioctl(interface, WLC_GET_RADIO, val, sizeof(int));
+		*val = ((*val & 1) ? 0 : 1);
+	} else {
+		*val = (1 << 16) | (*val ? 0 : 1); 
+		ret = wl_ioctl(interface, WLC_SET_RADIO, val, sizeof(int));
+	}
+
+	return ret;
+}
+
+static int wlc_wsec_key(wlc_param param, void *null, void *value)
+{
+	wl_wsec_key_t wsec_key;
+	unsigned char *index = value;
+	unsigned char *key;
+	unsigned char *data;
+	unsigned char hex[3];
+	
+	if ((param & PARAM_MODE) != SET)
+		return 0;
+
+	memset(&wsec_key, 0, sizeof(wsec_key));
+	if (index[0] == '=') {
+		wsec_key.flags = WL_PRIMARY_KEY;
+		index++;
+	}
+	
+	if ((index[0] < '1') || (index[0] > '4') || (index[1] != ','))
+		return -1;
+	
+	key = index + 2;
+	if (strncmp(key, "d:", 2) == 0) { /* delete key */
+	} else if (strncmp(key, "s:", 2) == 0) { /* ascii key */
+		key += 2;
+		wsec_key.len = strlen(key);
+
+		if ((wsec_key.len != 5) && (wsec_key.len != 13))
+			return -1;
+		
+		strcpy(wsec_key.data, key);
+	} else { /* hex key */
+		wsec_key.len = strlen(key);
+		if ((wsec_key.len != 10) && (wsec_key.len != 26))
+			return -1;
+		
+		wsec_key.len /= 2;
+		data = wsec_key.data;
+		hex[2] = 0;
+		do {
+			hex[0] = *(key++);
+			hex[1] = *(key++);
+			*(data++) = (unsigned char) strtoul(hex, NULL, 16);
+		} while (*key != 0);
+	}
+
+	return wl_bssiovar_set(interface, "wsec_key", vif, &wsec_key, sizeof(wsec_key));
+}
+
+static inline int cw2ecw(int cw)
+{
+	int i;	
+	for (cw++, i = 0; cw; i++) cw >>=1;
+	return i - 1;
+}
+
+static int wlc_wme_ac(wlc_param param, void *data, void *value)
+{
+	char *type = *((char **) data);
+	char *settings = (char *) value;
+	char cmd[100], *p, *val;
+	edcf_acparam_t params[AC_COUNT];
+	int ret;
+	int intval;
+	int cur = -1;
+	char *buf = wlbuf;
+
+	if ((param & PARAM_MODE) != SET)
+		return -1;
+	
+	memset(params, 0, sizeof(params));
+	ret = wl_iovar_get(interface, type, params, sizeof(params));
+	memset(buf, 0, BUFSIZE);
+	strcpy(buf, type);
+	buf += strlen(buf) + 1;
+	
+	foreach(cmd, settings, p) {
+		val = strchr(cmd, '=');
+		if (val == NULL) {
+			if (strcmp(cmd, "be") == 0)
+				cur = AC_BE;
+			else if (strcmp(cmd, "bk") == 0)
+				cur = AC_BK;
+			else if (strcmp(cmd, "vi") == 0)
+				cur = AC_VI;
+			else if (strcmp(cmd, "vo") == 0)
+				cur = AC_VO;
+			else
+				return -1;
+
+			/* just in case */
+			params[cur].ACI = (params[cur].ACI & (0x3 << 5)) | (cur << 5);
+		} else {
+			*(val++) = 0;
+			
+			intval = strtoul(val, NULL, 10);
+			if (strcmp(cmd, "cwmin") == 0)
+				params[cur].ECW = (params[cur].ECW & ~(0xf)) | cw2ecw(intval);
+			else if (strcmp(cmd, "ecwmin") == 0)
+				params[cur].ECW = (params[cur].ECW & ~(0xf)) | (intval & 0xf);
+			else if (strcmp(cmd, "cwmax") == 0)
+				params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | (cw2ecw(intval) << 4);
+			else if (strcmp(cmd, "ecwmax") == 0)
+				params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | ((intval & 0xf) << 4);
+			else if (strcmp(cmd, "aifsn") == 0)
+				params[cur].ACI = (params[cur].ACI & ~(0xf)) | (intval & 0xf);
+			else if (strcmp(cmd, "txop") == 0)
+				params[cur].TXOP = intval >> 5;
+			else if (strcmp(cmd, "force") == 0)
+				params[cur].ACI = (params[cur].ACI & ~(1 << 4)) | ((intval) ? (1 << 4) : 0);
+			else return -1;
+			
+			memcpy(buf, &params[cur], sizeof(edcf_acparam_t));
+			wl_ioctl(interface, WLC_SET_VAR, wlbuf, BUFSIZE);
+		}
+	}
+	return ret;
+}
+
+static int wlc_ifname(wlc_param param, void *data, void *value)
+{
+	char *val = (char *) value;
+	int ret = 0;
+	
+	if (param & SET) {
+		if (strlen(val) < 16)
+			strcpy(interface, val);
+		else ret = -1;
+	}
+	if (param & GET) {
+		strcpy(val, interface);
+	}
+
+	return ret;
+}
+
+static int wlc_wdsmac(wlc_param param, void *data, void *value)
+{
+	unsigned char mac[6];
+	int ret = 0;
+	
+	ret = wl_ioctl(interface, WLC_WDS_GET_REMOTE_HWADDR, &mac, 6);
+	if (ret == 0)
+		my_ether_ntoa(mac, value);
+
+	return ret;
+}
+
+static int wlc_pmk(wlc_param param, void *data, void *value)
+{
+	int ret = -1;
+	char *str = (char *) value;
+	wsec_pmk_t pmk;
+	
+	/* driver doesn't support GET */
+
+	if ((param & PARAM_MODE) == SET) {
+		strncpy(pmk.key, value, WSEC_MAX_PSK_LEN);
+		pmk.key_len = strlen(value);
+
+		if (pmk.key_len > WSEC_MAX_PSK_LEN)
+			pmk.key_len = WSEC_MAX_PSK_LEN;
+
+		pmk.flags = WSEC_PASSPHRASE;
+
+		ret = wl_ioctl(interface, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
+	}
+	
+	return ret;
+}
+
+static const struct wlc_call wlc_calls[] = {
+	{
+		.name = "version",
+		.param = STRING|NOARG,
+		.handler = wlc_string,
+		.data.str = VERSION,
+		.desc = "Version of this program"
+	},
+	{
+		.name = "debug",
+		.param = INT,
+		.handler = wlc_int,
+		.data.ptr = &debug,
+		.desc = "wlc debug level"
+	},
+	{
+		.name = "stdin",
+		.param = NOARG,
+		.handler = wlc_flag,
+		.data.ptr = &fromstdin,
+		.desc = "Accept input from stdin"
+	},
+	{
+		.name = "ifname",
+		.param = STRING,
+		.handler = wlc_ifname,
+		.desc = "interface to send commands to"
+	},
+	{
+		.name = "up",
+		.param = NOARG,
+		.handler = wlc_ioctl,
+		.data.num = WLC_UP,
+		.desc = "Bring the interface up"
+	},
+	{
+		.name = "down",
+		.param = NOARG,
+		.handler = wlc_ioctl,
+		.data.num = WLC_DOWN,
+		.desc = "Bring the interface down"
+	},
+	{
+		.name = "radio",
+		.param = INT,
+		.handler = wlc_radio,
+		.desc = "Radio enabled flag"
+	},
+	{
+		.name = "ap",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_AP << 16) | WLC_SET_AP),
+		.desc = "Access Point mode"
+	},
+	{
+		.name = "mssid",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "mbss",
+		.desc = "Multi-ssid mode"
+	},
+	{
+		.name = "apsta",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "apsta",
+		.desc = "AP+STA mode"
+	},
+	{
+		.name = "infra",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_INFRA << 16) | WLC_SET_INFRA),
+		.desc = "Infrastructure mode"
+	},
+	{
+		.name = "wet",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_WET << 16) | WLC_SET_WET),
+		.desc = "Wireless repeater mode",
+	},
+	{
+		.name = "statimeout",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "sta_retry_time",
+		.desc = "STA connection timeout"
+	},
+	{
+		.name = "country",
+		.param = STRING,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_COUNTRY << 16) | WLC_SET_COUNTRY),
+		.desc = "Country code"
+	},
+	{
+		.name = "channel",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_CHANNEL << 16) | WLC_SET_CHANNEL),
+		.desc = "Channel",
+	},
+	{
+		.name = "vlan_mode",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "vlan_mode",
+		.desc = "Parse 802.1Q tags",
+	},
+	{
+		.name = "vif",
+		.param = INT,
+		.handler = wlc_int,
+		.data.ptr = &vif,
+		.desc = "Current vif index"
+	},
+	{
+		.name = "enabled",
+		.param = INT,
+		.handler = wlc_vif_enabled,
+		.desc = "vif enabled flag"
+	},
+	{
+		.name = "ssid",
+		.param = STRING,
+		.handler = wlc_ssid,
+		.desc = "Interface ESSID"
+	},
+	{
+		.name = "closed",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "closednet",
+		.desc = "Hidden ESSID flag"
+	},
+	{
+		.name = "wsec",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "wsec",
+		.desc = "Security mode flags"
+	},
+	{
+		.name = "wepkey",
+		.param = STRING,
+		.handler = wlc_wsec_key,
+		.desc = "Set/Remove WEP keys"
+	},
+	{
+		.name = "wepauth",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_AUTH << 16) | WLC_SET_AUTH),
+		.desc = "WEP authentication type. 0 = OpenSystem, 1 = SharedKey"
+	},
+	{
+		.name = "wsec_restrict",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "wsec_restrict",
+		.desc = "Drop unencrypted traffic"
+	},
+	{
+		.name = "eap_restrict",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "eap_restrict",
+		.desc = "Only allow 802.1X traffic until 802.1X authorized"
+	},
+	{
+		.name = "wpa_auth",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "wpa_auth",
+		.desc = "WPA authentication modes"
+	},
+	{
+		.name = "ap_isolate",
+		.param = INT,
+		.handler = wlc_bssiovar,
+		.data.str = "ap_isolate",
+		.desc = "Isolate connected clients"
+	},
+	{
+		.name = "supplicant",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "sup_wpa",
+		.desc = "Built-in WPA supplicant"
+	},
+	{
+		.name = "passphrase",
+		.param = STRING,
+		.handler = wlc_pmk,
+		.desc = "Passphrase for built-in WPA supplicant",
+	},
+	{
+		.name = "maxassoc",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "maxassoc",
+		.desc = "Max. number of associated clients",
+	},
+	{
+		.name = "wme",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "wme",
+		.desc = "WME enabled"
+	},
+	{
+		.name = "wme_ac_ap",
+		.param = STRING,
+		.handler = wlc_wme_ac,
+		.data.str = "wme_ac_ap",
+		.desc = "Set WME AC options for AP mode",
+	},
+	{
+		.name = "wme_ac_sta",
+		.param = STRING,
+		.handler = wlc_wme_ac,
+		.data.str = "wme_ac_sta",
+		.desc = "Set WME AC options for STA mode",
+	},
+	{
+		.name = "wme_noack",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "wme_noack",
+		.desc = "WME ACK disable request",
+	},
+	{
+		.name = "802.11d",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_REGULATORY << 16) | WLC_SET_REGULATORY),
+		.desc = "Enable/disable 802.11d regulatory management",
+	},
+	{
+		.name = "802.11h",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_SPECT_MANAGMENT << 16) | WLC_SET_SPECT_MANAGMENT),
+		.desc = "Enable/disable 802.11h spectrum management",
+	},
+	{
+		.name = "fragthresh",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "fragthresh",
+		.desc = "Fragmentation threshold",
+	},
+	{
+		.name = "rtsthresh",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "rtsthresh",
+		.desc = "RTS threshold"
+	},
+	{
+		.name = "slottime",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "acktiming",
+		.desc = "Slot time"
+	},
+	{
+		.name = "rxant",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_ANTDIV << 16) | WLC_SET_ANTDIV),
+		.desc = "Rx antenna selection"
+	},
+	{
+		.name = "txant",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_TXANT << 16) | WLC_SET_TXANT),
+		.desc = "Tx antenna selection"
+	},
+	{
+		.name = "dtim",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_DTIMPRD << 16) | WLC_SET_DTIMPRD),
+		.desc = "DTIM period",
+	},
+	{
+		.name = "bcn",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_BCNPRD << 16) | WLC_SET_BCNPRD),
+		.desc = "Beacon interval"
+	},
+	{
+		.name = "frameburst",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_FAKEFRAG << 16) | WLC_SET_FAKEFRAG),
+		.desc = "Framebursting"
+	},
+	{
+		.name = "monitor",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_MONITOR << 16) | WLC_SET_MONITOR),
+		.desc = "Monitor mode"
+	},
+	{
+		.name = "passive_scan",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_PASSIVE_SCAN << 16) | WLC_SET_PASSIVE_SCAN),
+		.desc = "Passive scan mode"
+	},
+	{
+		.name = "macfilter",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_MACMODE << 16) | WLC_SET_MACMODE),
+		.desc = "MAC filter mode (0:disabled, 1:deny, 2:allow)"
+	},
+	{
+		.name = "maclist",
+		.param = STRING,
+		.data.num = ((WLC_GET_MACLIST << 16) | WLC_SET_MACLIST),
+		.handler = wlc_maclist,
+		.desc = "MAC filter list"
+	},
+	{
+		.name = "autowds",
+		.param = INT,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_LAZYWDS << 16) | WLC_SET_LAZYWDS),
+		.desc = "Automatic WDS"
+	},
+	{
+		.name = "wds",
+		.param = STRING,
+		.data.num = ((WLC_GET_WDSLIST << 16) | WLC_SET_WDSLIST),
+		.handler = wlc_maclist,
+		.desc = "WDS connection list"
+	},
+	{
+		.name = "wdstimeout",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "wdstimeout",
+		.desc = "WDS link detection timeout"
+	},
+	{
+		.name = "wdsmac",
+		.param = STRING|NOARG,
+		.handler = wlc_wdsmac,
+		.desc = "MAC of the remote WDS endpoint (only with wds0.* interfaces)"
+	},
+	{
+		.name = "afterburner",
+		.param = INT,
+		.handler = wlc_afterburner,
+		.desc = "Broadcom Afterburner"
+	},
+	{
+		.name = "ibss_merge",
+		.param = INT,
+		.handler = wlc_iovar,
+		.data.str = "ibss_coalesce_allowed",
+		.desc = "Allow IBSS merges"
+	},
+	{
+		.name = "bssid",
+		.param = MAC,
+		.handler = wlc_ioctl,
+		.data.num = ((WLC_GET_BSSID << 16) | WLC_SET_BSSID),
+		.desc = "BSSID"
+	},
+	{
+		.name = "default_bssid",
+		.param = MAC,
+		.handler = wlc_iovar,
+		.data.str = "perm_etheraddr",
+		.desc = "Default BSSID (read-only)"
+	},
+	{
+		.name = "assoclist",
+		.param = STRING,
+		.data.num = (WLC_GET_ASSOCLIST << 16),
+		.handler = wlc_maclist,
+		.desc = "MACs of associated stations"
+	},
+	{
+		.name = "gmode",
+		.param = INT,
+		.data.num = ((WLC_GET_GMODE << 16) | WLC_SET_GMODE),
+		.handler = wlc_ioctl,
+		.desc = "G Mode"
+	},
+};
+#define wlc_calls_size (sizeof(wlc_calls) / sizeof(struct wlc_call))
+
+static void usage(char *cmd)
+{
+	int i;
+	fprintf(stderr, "Usage: %s <command> [<argument> ...]\n"
+					"\n"
+					"Available commands:\n", cmd);
+	for (i = 0; i < wlc_calls_size; i++) {
+		fprintf(stderr, "\t%-16s\t%s\n", wlc_calls[i].name ?: "", wlc_calls[i].desc ?: "");
+	}
+	fprintf(stderr, "\n");
+	exit(1);
+}
+
+static int do_command(const struct wlc_call *cmd, char *arg)
+{
+	static char buf[BUFSIZE];
+	int set;
+	int ret = 0;
+	char *format, *end;
+	int intval;
+	void *ptr = (void *) buf;
+
+	if (debug >= 10) {
+		fprintf(stderr, "do_command %-16s\t'%s'\n", cmd->name, arg);
+	}
+	
+	if ((arg == NULL) && ((cmd->param & PARAM_TYPE) != NONE)) {
+		set = 0;
+		ret = cmd->handler(cmd->param | GET, (void *) &cmd->data, (void *) buf);
+		if (ret == 0) {
+			switch(cmd->param & PARAM_TYPE) {
+				case INT:
+					intval = *((int *) buf);
+					
+					if (intval > 65535)
+						format = "0x%08x\n";
+					else if (intval > 255)
+						format = "0x%04x\n";
+					else
+						format = "%d\n";
+					
+					fprintf(stdout, format, intval);
+					break;
+				case STRING:
+					fprintf(stdout, "%s\n", buf);
+					break;
+				case MAC:
+					my_ether_ntoa(buf, buf + 6);
+					fprintf(stdout, "%s\n", buf + 6);
+					break;
+			}
+		}
+	} else { /* SET */
+		set = 1;
+		switch(cmd->param & PARAM_TYPE) {
+			case INT:
+				intval = strtoul(arg, &end, 10);
+				if (end && !(*end)) {
+					memcpy(buf, &intval, sizeof(intval));
+				} else {
+					fprintf(stderr, "%s: Invalid argument\n", cmd->name);
+					return -1;
+				}
+				break;
+			case STRING:
+				strncpy(buf, arg, BUFSIZE);
+				buf[BUFSIZE - 1] = 0;
+				break;
+			case MAC:
+				ptr = ether_aton(arg);
+				if (!ptr) {
+					fprintf(stderr, "%s: Invalid mac address '%s'\n", cmd->name, arg);
+					return -1;
+				}
+				break;
+		}
+
+		ret = cmd->handler(cmd->param | SET, (void *) &cmd->data, ptr);
+	}
+	
+	if ((debug > 0) && (ret != 0)) 
+		fprintf(stderr, "Command '%s %s' failed: %d\n", (set == 1 ? "set" : "get"), cmd->name, ret);
+	
+	return ret;
+}
+
+static struct wlc_call *find_cmd(char *name)
+{
+	int found = 0, i = 0;
+
+	while (!found && (i < wlc_calls_size)) {
+		if (strcmp(name, wlc_calls[i].name) == 0)
+			found = 1;
+		else
+			i++;
+	}
+
+	return (struct wlc_call *) (found ? &wlc_calls[i] : NULL);
+}
+
+int main(int argc, char **argv)
+{
+	static char buf[BUFSIZE];
+	char *s, *s2;
+	char *cmd = argv[0];
+	struct wlc_call *call;
+	int ret = 0;
+
+	if (argc < 2)
+		usage(argv[0]);
+
+	for(interface[2] = '0'; (interface[2] < '3') && (wl_probe(interface) != 0); interface[2]++);
+	if (interface[2] == '3') {
+		fprintf(stderr, "No Broadcom wl interface found!\n");
+		return -1;
+	}
+
+	argv++;
+	argc--;
+	while ((argc > 0) && (argv[0] != NULL)) {
+		if ((call = find_cmd(argv[0])) == NULL) {
+			fprintf(stderr, "Invalid command: %s\n\n", argv[0]);
+			usage(cmd);
+		}
+		if ((argc > 1) && (!(call->param & NOARG))) {
+			ret = do_command(call, argv[1]);
+			argv += 2;
+			argc -= 2;
+		} else {
+			ret = do_command(call, NULL);
+			argv++;
+			argc--;
+		}
+	}
+
+	while (fromstdin && !feof(stdin)) {
+		*buf = 0;
+		fgets(buf, BUFSIZE - 1, stdin);
+		
+		if (*buf == 0)
+			continue;
+		
+		if ((s = strchr(buf, '\r')) != NULL)
+			*s = 0;
+		if ((s = strchr(buf, '\n')) != NULL)
+			*s = 0;
+
+		s = buf;
+		while (isspace(*s))
+			s++;
+
+		if (!*s)
+			continue;
+	
+		if ((s2 = strchr(buf, ' ')) != NULL)
+			*(s2++) = 0;
+		
+		while (s2 && isspace(*s2))
+			s2++;
+		
+		if ((call = find_cmd(buf)) == NULL) {
+			fprintf(stderr, "Invalid command: %s\n", buf);
+			ret = -1;
+		} else
+			ret = do_command(call, ((call->param & NOARG) ? NULL : s2));
+	}
+
+	return ret;
+}