ipq807x: Add Xiaomi AX9000

Xiaomi AX9000 is a premium 802.11ax "tri"-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
* RAM: 1024MB of DDR3
* Storage: 256MB of parallel NAND
* Ethernet:
	* 4x1G RJ45 ports (QCA8075) with 1x status LED per port
	* 1x2.5G RJ45 port (QCA8081) with 1x status LED
* WLAN:
	* PCI based Qualcomm QCA9889 1x1 802.11ac Wawe 2 for IoT
	* 2.4GHz: Qualcomm QCN5024 4x4@40MHz 802.11b/g/n/ax 1147 Mbps PHY rate
	* 5.8GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402Mbps PHY rate
	* 5GHz: PCI based Qualcomm QCN9024 4x4@160MHz 802.11a/b/g/n/ac/ax 4804Mbps PHY rate
* USB: 1x USB3.0 Type-A port
* LED-s:
	* System (Blue and Yellow)
	* Network (Blue and Yellow)
	* RGB light bar on top in X shape
* Buttons:
	* 1x Power switch
	* 1x Soft reset
	* 1x Mesh button
* Power: 12V DC Jack

Installation instructions:

Obtaining SSH access is mandatory
https://openwrt.org/inbox/toh/xiaomi/ax9000#obtain_ssh_access

Installation is done by the ubiformat method, through SSH:
1. Open an SSH shell to the router
2. Copy the file openwrt-ipq807x-generic-xiaomi_ax9000-initramfs-factory.ubi to the /tmp directory
3. Check which rootfs partition is your router booted in (0 = rootfs | 1 = rootfs_1):
nvram get flag_boot_rootfs

4. Find the rootfs and rootfs_1 mtd indexes respectively:
cat /proc/mtd
Please confirm if mtd21 and mtd22 are the correct indexes from above!

5. Use the command ubiformat to flash the opposite mtd with UBI image:

If nvram get flag_boot_rootfs returned 0:
ubiformat /dev/mtd22 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax9000-initramfs-factory.ubi && nvram set flag_boot_rootfs=1 && nvram set flag_last_success=1 && nvram commit

otherwise:
ubiformat /dev/mtd21 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax9000-initramfs-factory.ubi && nvram set flag_boot_rootfs=0 && nvram set flag_last_success=0 && nvram commit

6. Reboot the device by:
reboot

Previous commands flashed an ubinized OpenWrt initramfs that will serve as the intermediate step
since OpenWrt uses unified rootfs in order to fully utilize NAND and provide enough space for packages.
Continue in order to pernamently flash OpenWrt:

7. SSH into OpenWrt from one of the LAN ports
8. Copy the file openwrt-ipq807x-generic-xiaomi_ax9000-squashfs-sysupgrade.bin to the /tmp directory
9. Sysupgrade the device:
sysupgrade -n /tmp/openwrt-ipq807x-generic-xiaomi_ax9000-squashfs-sysupgrade.bin

Device will reboot with OpenWrt, and then sysupgrade can be used to upgrade the device when desired.

Signed-off-by: Robert Marko <robimarko@gmail.com>

4 files changed, 5 insertions, 1 deletions

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index dbc2b4e227..02e1c8af48 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -45,6 +45,7 @@ ALLWIFIBOARDS:= \
 	sony_ncp-hg100-cellular \
 	teltonika_rutx \
 	xiaomi_ax3600 \
+	xiaomi_ax9000 \
 	zte_mf18a \
 	zte_mf289f
 
@@ -81,8 +82,10 @@ define ipq-wifi-install-one
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
   $(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
     $(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
+    $(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
-  ))))))
+  )))))))
 
 endef
 # Blank line required at end of above define due to foreach context
@@ -138,6 +141,7 @@ $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
 $(eval $(call generate-ipq-wifi-package,sony_ncp-hg100-cellular,Sony NCP-HG100/Cellular))
 $(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
 $(eval $(call generate-ipq-wifi-package,zte_mf18a,ZTE MF18A))
 $(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
 
diff --git a/package/firmware/ipq-wifi/board-xiaomi_ax9000.ipq8074 b/package/firmware/ipq-wifi/board-xiaomi_ax9000.ipq8074
new file mode 100644
index 0000000000..052bb0516a
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-xiaomi_ax9000.ipq8074
diff --git a/package/firmware/ipq-wifi/board-xiaomi_ax9000.qca9889 b/package/firmware/ipq-wifi/board-xiaomi_ax9000.qca9889
new file mode 100644
index 0000000000..abccf93558
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-xiaomi_ax9000.qca9889
diff --git a/package/firmware/ipq-wifi/board-xiaomi_ax9000.qcn9074 b/package/firmware/ipq-wifi/board-xiaomi_ax9000.qcn9074
new file mode 100644
index 0000000000..5d5c2061a7
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-xiaomi_ax9000.qcn9074