aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
diff options
context:
space:
mode:
authorDirk Buchwalder <buchwalder@posteo.de>2022-01-01 23:17:51 +0100
committerRobert Marko <robimarko@gmail.com>2023-01-16 12:42:23 +0100
commita36fc589fe7ac53ccb83f4503953bd6646477d0a (patch)
treef17042390ca53762d5c3320da04492ece107a776 /package/firmware
parent8253cb2de59aff81e576ea2655b1d290e4098001 (diff)
downloadupstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.tar.gz
upstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.tar.bz2
upstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.zip
ipq807x: add Edimax CAX1800
Edimax CAX1800 is a 802.11 ax dual-band AP with PoE. AP can be ceiling or wall mount. Specifications: • CPU: Qualcomm IPQ8070A Quad core Cortex-A53 1.4GHz • RAM: 512MB of DDR3 • Storage: 128MB NAND (contains rootfs) / 8MB NOR (contains art and uboot-env) • Ethernet: 1x 1G RJ45 port (QCA8072) PoE • WLAN: 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate 5GHz: Qualcomm QCN5054 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate • LEDs: 3 x GPIO-controlled System-LEDs (form one virtual RGB System-LED) black_small_square Buttons: 1x soft reset black_small_square Power: 12V DC jack or PoE (802.3af ) An unpopulated serial header is onboard. RX/TX is working, bootwait is active, secure boot is not enabled. SSH can be activated in the stock firmware, but it drops only to a limited shell . Installation Instructions: black_small_square obtain serial access black_small_square stop auto boot black_small_square tftpboot the initramfs image (serverip is set to 192.168.99.8 in uboot) black_small_square bootm black_small_square copy openwrt-ipq807x-generic-edimax_cax1800-squashfs-nand-factory.ubi to the device black_small_square write the image to the NAND: black_small_square cat /proc/mtd and look for rootfs partition (should be mtd0) black_small_square ubiformat /dev/mtd0 -f -y openwrt-ipq807x-generic-edimax_cax1800-squashfs- nand-factory.ubi black_small_square reboot Note: Device is not using dual partitioning (NAND contains other partitions with different manufacture data etc.) Draytek VigorAP 960C and Lancom LW-600 both look similar, but I haven't checked them. Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Diffstat (limited to 'package/firmware')
-rw-r--r--package/firmware/ipq-wifi/Makefile2
-rw-r--r--package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074bin0 -> 131180 bytes
2 files changed, 2 insertions, 0 deletions
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 1fa7482ddb..2767228080 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -29,6 +29,7 @@ ALLWIFIBOARDS:= \
devolo_magic-2-wifi-next \
edgecore_ecw5410 \
edgecore_oap100 \
+ edimax_cax1800 \
extreme-networks_ws-ap3915i \
glinet_gl-a1300 \
glinet_gl-ap1300 \
@@ -120,6 +121,7 @@ $(eval $(call generate-ipq-wifi-package,aruba_ap-365,Aruba AP-365))
$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,extreme-networks_ws-ap3915i,Edgecore OAP100))
$(eval $(call generate-ipq-wifi-package,glinet_gl-a1300,GL.iNet GL-A1300))
$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
diff --git a/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074 b/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074
new file mode 100644
index 0000000000..5c9f4700f4
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074
Binary files differ