diff options
| author | Dirk Buchwalder <buchwalder@posteo.de> | 2022-01-01 23:17:51 +0100 |
|---|---|---|
| committer | Robert Marko <robimarko@gmail.com> | 2023-01-16 12:42:23 +0100 |
| commit | a36fc589fe7ac53ccb83f4503953bd6646477d0a (patch) | |
| tree | f17042390ca53762d5c3320da04492ece107a776 /package/firmware | |
| parent | 8253cb2de59aff81e576ea2655b1d290e4098001 (diff) | |
| download | upstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.tar.gz upstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.tar.bz2 upstream-a36fc589fe7ac53ccb83f4503953bd6646477d0a.zip | |
ipq807x: add Edimax CAX1800
Edimax CAX1800 is a 802.11 ax dual-band AP
with PoE. AP can be ceiling or wall mount.
Specifications:
• CPU: Qualcomm IPQ8070A Quad core Cortex-A53 1.4GHz
• RAM: 512MB of DDR3
• Storage: 128MB NAND (contains rootfs) / 8MB NOR (contains art and uboot-env)
• Ethernet: 1x 1G RJ45 port (QCA8072) PoE
• WLAN:
2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
5GHz: Qualcomm QCN5054 2x2 802.11a/b/g/n/ac/ax 1201 PHY rate
• LEDs:
3 x GPIO-controlled System-LEDs
(form one virtual RGB System-LED)
black_small_square Buttons: 1x soft reset
black_small_square Power: 12V DC jack or PoE (802.3af )
An unpopulated serial header is onboard.
RX/TX is working, bootwait is active, secure boot is not enabled.
SSH can be activated in the stock firmware, but it drops only
to a limited shell .
Installation Instructions:
black_small_square obtain serial access
black_small_square stop auto boot
black_small_square tftpboot the initramfs image (serverip is set to 192.168.99.8 in uboot)
black_small_square bootm
black_small_square copy openwrt-ipq807x-generic-edimax_cax1800-squashfs-nand-factory.ubi
to the device
black_small_square write the image to the NAND:
black_small_square cat /proc/mtd and look for rootfs partition (should be mtd0)
black_small_square ubiformat /dev/mtd0 -f -y openwrt-ipq807x-generic-edimax_cax1800-squashfs-
nand-factory.ubi
black_small_square reboot
Note: Device is not using dual partitioning (NAND contains other partitions
with different manufacture data etc.)
Draytek VigorAP 960C and Lancom LW-600 both look similar, but I haven't checked them.
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Diffstat (limited to 'package/firmware')
| -rw-r--r-- | package/firmware/ipq-wifi/Makefile | 2 | ||||
| -rw-r--r-- | package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074 | bin | 0 -> 131180 bytes |
2 files changed, 2 insertions, 0 deletions
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 1fa7482ddb..2767228080 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -29,6 +29,7 @@ ALLWIFIBOARDS:= \ devolo_magic-2-wifi-next \ edgecore_ecw5410 \ edgecore_oap100 \ + edimax_cax1800 \ extreme-networks_ws-ap3915i \ glinet_gl-a1300 \ glinet_gl-ap1300 \ @@ -120,6 +121,7 @@ $(eval $(call generate-ipq-wifi-package,aruba_ap-365,Aruba AP-365)) $(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next)) $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) $(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100)) +$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800)) $(eval $(call generate-ipq-wifi-package,extreme-networks_ws-ap3915i,Edgecore OAP100)) $(eval $(call generate-ipq-wifi-package,glinet_gl-a1300,GL.iNet GL-A1300)) $(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300)) diff --git a/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074 b/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074 Binary files differnew file mode 100644 index 0000000000..5c9f4700f4 --- /dev/null +++ b/package/firmware/ipq-wifi/board-edimax_cax1800.ipq8074 |