aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware/ipq-wifi
diff options
context:
space:
mode:
authorJeff Kletsky <git-commits@allycomm.com>2019-04-14 13:20:57 -0700
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 13:43:22 +0200
commit4bdc873a5fda60557478a4294983cf71e7eccea6 (patch)
tree9dff872cb6185655fbf710067fc33839fd5f3c3c /package/firmware/ipq-wifi
parent7b58c5873325f008083adcf1d31b69f814453357 (diff)
downloadupstream-4bdc873a5fda60557478a4294983cf71e7eccea6.tar.gz
upstream-4bdc873a5fda60557478a4294983cf71e7eccea6.tar.bz2
upstream-4bdc873a5fda60557478a4294983cf71e7eccea6.zip
firmware/ipq-wifi: Extend for multi-chip boards
This package provides board-specific reference ("cal") data on an interim basis until included in the upstream distros While originally conceived for IPQ4019-based boards, similar needs are appearing with three-radio devices. For some of these devices, both a board-2.bin file needs to be supplied both for the IPQ4019 as well as for the other radio on the board. This patch allows new or multiple overrides to be specified by: * Adding board name to ALLWIFIBOARDS * Placing file(s) in this directory named as board-<devicename>.<qca4019|qca9888|qca9984> * Adding $(eval $(call generate-ipq-wifi-package,<device>,<display name>)) (along with suitable package selection for the board) At this time, QCA4019, QCA9888, and QCA9984 are supported. Extension to other chips should be straightforward. The existing files, board-*.bin, are "grandfathered" as QCA4019. The package name has been retained for compatability reasons. At this time it DEPENDS:=@TARGET_ipq40xx, limiting its visibility. Build-tested-on: asus_map-ac2200, alfa-network_ap120c-ac, avm_fritzbox-7530, avm_fritzrepeater-3000, engenius_eap1300, engenius_ens620ext, linksys_ea6350v3, qxwlan-e2600ac-c1/-c2 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Diffstat (limited to 'package/firmware/ipq-wifi')
-rw-r--r--package/firmware/ipq-wifi/Makefile79
l---------package/firmware/ipq-wifi/board-asus_map-ac2200.bin1
l---------package/firmware/ipq-wifi/board-qxwlan_e2600ac.bin1
3 files changed, 62 insertions, 19 deletions
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 705617e70b..5c4ebb23c4 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -14,52 +14,93 @@ endef
define Build/Compile
endef
-#ALLWIFIBOARDS:=<devicename>
+#
+# This is intended to be used on an interim basis until device-specific
+# board data for new devices is available through the upstream compilation
+#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 avm_fritzrepeater-3000 engenius_eap1300 engenius_ens620ext linksys_ea6350v3 qxwlan_e2600ac
+#
+
+ALLWIFIBOARDS:= \
+ alfa-network_ap120c-ac \
+ asus_map-ac2200 \
+ avm_fritzbox-7530 \
+ avm_fritzrepeater-3000 \
+ engenius_eap1300 \
+ engenius_ens620ext \
+ linksys_ea6350v3 \
+ qxwlan_e2600ac
+
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
- SUBMENU:=ath10k IPQ4019 Boarddata
+ SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:=@TARGET_ipq40xx
TITLE:=Custom Board
endef
+define ipq-wifi-install-one-to
+ $(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
+ $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
+endef
+
+# Note: .bin deprecated; supports existing boards
+
+define ipq-wifi-install-one
+ $(if $(filter $(suffix $(1)),.QCA4019 .qca4019 .bin),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
+ $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+ $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+ $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
+ )))
+
+endef
+# Blank line required at end of above define due to foreach context
+
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
- TITLE:=Board for $(3)
+ TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
-This device custom package board-2.bin overwrites the board-2.bin
-file which is supplied by the ath10k-firmware-qca4019 package.
+The $(2) requires board-specific, reference ("cal") data
+that is not yet present in the upstream wireless firmware distribution.
+
+This package supplies board-2.bin file(s) that, in the interim,
+overwrite those supplied by the ath10k-firmware-* packages.
-This is package is only necessary for the $(3).
-Don't install it for any other device!
+This is package is only necessary for the $(2).
+
+Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
- $(INSTALL_DIR) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0
- $(INSTALL_DATA) ./$(2) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+ $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
+ $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
-#$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
-$(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ac,board-alfa-network_ap120c-ac.bin,ALFA Network AP120C-AC))
-$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200))
-$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))
-$(eval $(call generate-ipq-wifi-package,engenius_ens620ext,board-engenius_ens620ext.bin,EnGenius ENS620EXT))
-$(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,board-avm_fritzbox-7530.bin,AVM FRITZ!Box 7530))
-$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,board-avm_fritzrepeater-3000.bin,AVM FRITZ!Repeater 3000))
-$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
-$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,board-qxwlan-e2600ac.bin,Qxwlan E2600AC))
+# Add board name to ALLWIFIBOARDS
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
+
+$(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ac,ALFA Network AP120C-AC))
+$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,ASUS MAP-AC2200))
+$(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,AVM FRITZ!Box 7530))
+$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,AVM FRITZ!Repeater 3000))
+$(eval $(call generate-ipq-wifi-package,engenius_eap1300,EnGenius EAP1300))
+$(eval $(call generate-ipq-wifi-package,engenius_ens620ext,EnGenius ENS620EXT))
+$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,Linksys EA6350v3))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
diff --git a/package/firmware/ipq-wifi/board-asus_map-ac2200.bin b/package/firmware/ipq-wifi/board-asus_map-ac2200.bin
new file mode 120000
index 0000000000..d6e8b35b11
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-asus_map-ac2200.bin
@@ -0,0 +1 @@
+board-map-ac2200.bin \ No newline at end of file
diff --git a/package/firmware/ipq-wifi/board-qxwlan_e2600ac.bin b/package/firmware/ipq-wifi/board-qxwlan_e2600ac.bin
new file mode 120000
index 0000000000..acccf886ef
--- /dev/null
+++ b/package/firmware/ipq-wifi/board-qxwlan_e2600ac.bin
@@ -0,0 +1 @@
+board-qxwlan-e2600ac.bin \ No newline at end of file