aboutsummaryrefslogtreecommitdiffstats
path: root/package/comgt/files/3g.sh
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-02-02 01:21:31 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-02-02 01:21:31 +0000
commit738d610209c81288218c31b1edd99e20449550ae (patch)
tree19c414aa888eae15efc9ee3ffd641543715df825 /package/comgt/files/3g.sh
parent875cd251a031f2e838ba43bfdcbdd684e0d2234b (diff)
downloadupstream-738d610209c81288218c31b1edd99e20449550ae.tar.gz
upstream-738d610209c81288218c31b1edd99e20449550ae.tar.bz2
upstream-738d610209c81288218c31b1edd99e20449550ae.zip
Add CDMA/EVDO support to comgt package
This patch adds a chat script and makes some modifications to /lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in addition to the existing GPRS/UMTS support. Modifications to 3g.sh are: - Added 'chat' variable to point at the appropriate script - Added 'evdo' and 'cdma' as acceptable 'service' values, and skip the whole gcom initialization bit - Changed pppd connection speed from 460800 to more widely supported 115200; in my experience, this is not your actual connection speed, but at what speed pppd sends setup commands to the interface. This kinda eliminates the need for /etc/ppp/3g.connect - I think I've replaced that functionality, but in a slightly more standardized method, using the 'connect' variable understood by PPP. Signed-off-by: RB<aoz.syn@gmail.com> SVN-Revision: 10347
Diffstat (limited to 'package/comgt/files/3g.sh')
-rw-r--r--package/comgt/files/3g.sh53
1 files changed, 29 insertions, 24 deletions
diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 5274821a1b..2859a1bda7 100644
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -36,6 +36,7 @@ stop_interface_3g() {
setup_interface_3g() {
local iface="$1"
local config="$2"
+ local chat="/etc/chatscripts/3g.chat"
config_get device "$config" device
@@ -51,30 +52,35 @@ setup_interface_3g() {
set_3g_led 1 0 1
# figure out hardware specific commands for the card
- if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
- case "$service" in
- umts_only) CODE=2;;
- gprs_only) CODE=1;;
- *) CODE=0;;
- esac
- mode="AT\$NWRAT=${CODE},2"
- else
- case "$service" in
- umts_only) CODE=1;;
- gprs_only) CODE=0;;
- *) CODE=3;;
- esac
- mode="AT_OPSYS=${CODE}"
- fi
-
- PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
- echo "$cfg(3g): Failed to set the PIN code."
- set_3g_led 0 0 0
- return 1
- }
- MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+ case "$service" in
+ cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
+ *)
+ if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+ case "$service" in
+ umts_only) CODE=2;;
+ gprs_only) CODE=1;;
+ *) CODE=0;;
+ esac
+ mode="AT\$NWRAT=${CODE},2"
+ else
+ case "$service" in
+ umts_only) CODE=1;;
+ gprs_only) CODE=0;;
+ *) CODE=3;;
+ esac
+ mode="AT_OPSYS=${CODE}"
+ fi
+
+ PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+ echo "$cfg(3g): Failed to set the PIN code."
+ set_3g_led 0 0 0
+ return 1
+ }
+ MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+ esac
set_3g_led 1 0 0
+ config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
start_pppd "$config" \
noaccomp \
nopcomp \
@@ -83,7 +89,6 @@ setup_interface_3g() {
noauth \
lock \
crtscts \
- connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
${mtu:+mtu $mtu mru $mtu} \
- 460800 "$device"
+ 115200 "$device"
}