finally move buildroot-ng to trunk

19 files changed, 4627 insertions, 0 deletions

diff --git a/package/busybox/config/Config.in b/package/busybox/config/Config.in
new file mode 100644
index 0000000000..6a5d6a74d1
--- /dev/null
+++ b/package/busybox/config/Config.in
@@ -0,0 +1,474 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+
+config BUSYBOX_HAVE_DOT_CONFIG
+	bool
+	default y
+
+menu "Busybox Settings"
+
+menu "General Configuration"
+
+config BUSYBOX_CONFIG_NITPICK
+	bool "See lots more (probably unnecessary) configuration options."
+	default n
+	help
+	  Some BusyBox applets have more configuration options than anyone
+	  will ever care about.  To avoid drowining people in complexity, most
+	  of the applet features that can be set to a sane default value are
+	  hidden, unless you hit the above switch.
+
+	  This is better than to telling people to edit the busybox source
+	  code, but not by much.
+
+	  See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
+
+	  You have been warned.
+
+choice
+	prompt "Buffer allocation policy"
+	default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+	depends on BUSYBOX_CONFIG_NITPICK
+	help
+	  There are 3 ways BusyBox can handle buffer allocations:
+	  - Use malloc. This costs code size for the call to xmalloc.
+	  - Put them on stack. For some very small machines with limited stack
+	    space, this can be deadly.  For most folks, this works just fine.
+	  - Put them in BSS. This works beautifully for computers with a real
+	    MMU (and OS support), but wastes runtime RAM for uCLinux. This
+	    behavior was the only one available for BusyBox versions 0.48 and
+	    earlier.
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC
+	bool "Allocate with Malloc"
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+	bool "Allocate on the Stack"
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS
+	bool "Allocate in the .bss section"
+
+endchoice
+
+config BUSYBOX_CONFIG_SHOW_USAGE
+	bool "Show terse applet usage messages"
+	default y
+	help
+	  All BusyBox applets will show help messages when invoked with
+	  wrong arguments. You can turn off printing these terse usage
+	  messages if you say no here.
+	  This will save you up to 7k.
+
+config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE
+	bool "Show verbose applet usage messages"
+	default y
+	select BUSYBOX_CONFIG_SHOW_USAGE
+	help
+	  All BusyBox applets will show more verbose help messages when
+	  busybox is invoked with --help.  This will add a lot of text to the
+	  busybox binary.  In the default configuration, this will add about
+	  13k, but it can add much more depending on your configuration.
+
+config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE
+	bool "Store applet usage messages in compressed form"
+	default n
+	depends on BUSYBOX_CONFIG_SHOW_USAGE && BUSYBOX_CONFIG_NITPICK
+	help
+	  Store usage messages in compressed form, uncompress them on-the-fly
+	  when <applet> --help is called.
+
+	  If you have a really tiny busybox with few applets enabled (and
+	  bunzip2 isn't one of them), the overhead of the decompressor might
+	  be noticeable.  Also, if you run executables directly from ROM
+	  and have very little memory, this might not be a win.  Otherwise,
+	  you probably want this.
+
+config BUSYBOX_CONFIG_FEATURE_INSTALLER
+	bool "Support --install [-s] to install applet links at runtime"
+	default n
+	help
+	  Enable 'busybox --install [-s]' support.  This will allow you to use
+	  busybox at runtime to create hard links or symlinks for all the
+	  applets that are compiled into busybox.  This feature requires the
+	  /proc filesystem.
+
+config BUSYBOX_CONFIG_LOCALE_SUPPORT
+	bool "Enable locale support (system needs locale for this to work)"
+	default n
+	help
+	  Enable this if your system has locale support and you would like
+	  busybox to support locale settings.
+
+config BUSYBOX_CONFIG_GETOPT_LONG
+	bool
+	default y
+#	bool "Enable support for --long-options"
+#	default n
+#	help
+#	  Enable this if you want busybox applets to use the gnu --long-option
+#	  style, in addition to single character -a -b -c style options.
+
+config BUSYBOX_CONFIG_FEATURE_DEVPTS
+	bool "Use the devpts filesystem for Unix98 PTYs"
+	default y
+	help
+	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+	  busybox will use /dev/ptmx for the master side of the pseudoterminal
+	  and /dev/pts/<number> for the slave side.  Otherwise, BSD style
+	  /dev/ttyp<number> will be used. To use this option, you should have
+	  devpts mounted.
+
+config BUSYBOX_CONFIG_FEATURE_CLEAN_UP
+	bool "Clean up all memory before exiting (usually not needed)"
+	default n
+	depends on BUSYBOX_CONFIG_NITPICK
+	help
+	  As a size optimization, busybox normally exits without explicitly
+	  freeing dynamically allocated memory or closing files.  This saves
+	  space since the OS will clean up for us, but it can confuse debuggers
+	  like valgrind, which report tons of memory and resource leaks.
+
+	  Don't enable this unless you have a really good reason to clean
+	  things up manually.
+
+config BUSYBOX_CONFIG_FEATURE_SUID
+	bool "Support for SUID/SGID handling"
+	default y
+	help
+	  With this option you can install the busybox binary belonging
+	  to root with the suid bit set, and it'll and it'll automatically drop
+	  priviledges for applets that don't need root access.
+
+	  If you're really paranoid and don't want to do this, build two
+	  busybox binaries with different applets in them (and the appropriate
+	  symlinks pointing to each binary), and only set the suid bit on the
+	  one that needs it.  The applets currently marked to need the suid bit
+	  are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
+	  and vlock.
+
+config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
+	bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
+	default n if BUSYBOX_CONFIG_FEATURE_SUID
+	depends on BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  Allow the SUID / SGID state of an applet to be determined at runtime
+	  by checking /etc/busybox.conf.  (This is sort of a poor man's sudo.)
+	  The format of this file is as follows:
+
+	  <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+
+	  An example might help:
+
+	  [SUID]
+	  su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+	  su = ssx        # exactly the same
+
+	  mount = sx- root.disk # applet mount can be run by root and members of group disk
+	                        # and runs with euid=0
+
+	  cp = --- # disable applet cp for everyone
+
+	  The file has to be owned by user root, group root and has to be
+	  writeable only by root:
+	  	(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+	  The busybox executable has to be owned by user root, group
+	  root and has to be setuid root for this to work:
+	  	(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+	  Robert 'sandman' Griebl has more information here:
+	  <url: http://www.softforge.de/bb/suid.html >.
+
+config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET
+	bool "Suppress warning message if /etc/busybox.conf is not readable"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
+	help
+	  /etc/busybox.conf should be readable by the user needing the SUID, check
+	  this option to avoid users to be notified about missing permissions.
+
+config BUSYBOX_CONFIG_SELINUX
+	bool "Support NSA Security Enhanced Linux"
+	default n
+	help
+	  Enable support for SELinux in applets ls, ps, and id.  Also provide
+	  the option of compiling in SELinux applets.
+
+	  If you do not have a complete SELinux userland installed, this stuff
+	  will not compile. Go visit
+		http://www.nsa.gov/selinux/index.html
+	  to download the necessary stuff to allow busybox to compile with
+	  this option enabled. Specifially, libselinux 1.28 or better is
+	  directly required by busybox. If the installation is located in a
+	  non-standard directory, provide it by invoking make as follows:
+		CFLAGS=-I<libselinux-include-path> \
+		LDFLAGS=-L<libselinux-lib-path> \
+		make
+
+	  Most people will leave this set to 'N'.
+
+config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH
+	string "Path to BusyBox executable"
+	default "/proc/self/exe"
+	help
+	  When Busybox applets need to run other busybox applets, BusyBox
+	  sometimes needs to exec() itself.  When the /proc filesystem is
+	  mounted, /proc/self/exe always points to the currently running
+	  executable.  If you haven't got /proc, set this to wherever you
+	  want to run BusyBox from.
+
+endmenu
+
+menu 'Build Options'
+
+config BUSYBOX_CONFIG_STATIC
+	bool "Build BusyBox as a static binary (no shared libs)"
+	default n
+	help
+	  If you want to build a static BusyBox binary, which does not
+	  use or require any shared libraries, then enable this option.
+	  This can cause BusyBox to be considerably larger, so you should
+	  leave this option false unless you have a good reason (i.e.
+	  your target platform does not support shared libraries, or
+	  you are building an initrd which doesn't need anything but
+	  BusyBox, etc).
+
+	  Most people will leave this set to 'N'.
+
+config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	bool "Build shared libbusybox"
+	default n
+	help
+	  Build a shared library libbusybox.so which contains all
+	  libraries used inside busybox.
+
+	  This is an experimental feature intended to support the upcoming
+	  "make standalone" mode.  Enabling it against the one big busybox
+	  binary serves no purpose (and increases the size).  You should
+	  almost certainly say "no" to this right now.
+
+config BUSYBOX_CONFIG_FEATURE_FULL_LIBBUSYBOX
+	bool "Feature-complete libbusybox"
+	default n if !CONFIG_FEATURE_SHARED_BUSYBOX
+	depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	help
+	  Build a libbusybox with the complete feature-set, disregarding
+	  the actually selected config.
+
+	  Normally, libbusybox will only contain the features which are
+	  used by busybox itself. If you plan to write a separate
+	  standalone application which uses libbusybox say 'Y'.
+
+	  Note: libbusybox is GPL, not LGPL, and exports no stable API that
+	  might act as a copyright barrier.  We can and will modify the
+	  exported function set between releases (even minor version number
+	  changes), and happily break out-of-tree features.
+
+	  Say 'N' if in doubt.
+
+config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX
+	bool "Use shared libbusybox for busybox"
+	default n if BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	depends on !CONFIG_STATIC && BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	help
+	  Use libbusybox.so also for busybox itself.
+	  You need to have a working dynamic linker to use this variant.
+
+config BUSYBOX_CONFIG_LFS
+	bool
+	default y
+	select BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
+	help
+	  If you want to build BusyBox with large file support, then enable
+	  this option.  This will have no effect if your kernel or your C
+	  library lacks large file support for large files.  Some of the
+	  programs that can benefit from large file support include dd, gzip,
+	  cp, mount, tar, and many others.  If you want to access files larger
+	  than 2 Gigabytes, enable this option.  Otherwise, leave it set to 'N'.
+
+config BUSYBOX_USING_CROSS_COMPILER
+	bool
+	default y
+	help
+	  Do you want to build BusyBox with a Cross Compiler?  If so,
+	  then enable this option.  Otherwise leave it set to 'N'.
+
+config BUSYBOX_CROSS_COMPILER_PREFIX
+	string
+	default "mipsel-uclibc-"
+	depends on BUSYBOX_USING_CROSS_COMPILER
+	help
+	  If you want to build BusyBox with a cross compiler, then you
+	  will need to set this to the cross-compiler prefix.  For example,
+	  if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
+	  then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
+	  which will ensure the correct compiler is used.
+
+config BUSYBOX_CONFIG_BUILD_AT_ONCE
+	bool "Compile all sources at once"
+	default n
+	help
+	  Normally each source-file is compiled with one invocation of
+	  the compiler.
+	  If you set this option, all sources are compiled at once.
+	  This gives the compiler more opportunities to optimize which can
+	  result in smaller and/or faster binaries.
+
+	  Setting this option will consume alot of memory, e.g. if you
+	  enable all applets with all features, gcc uses more than 300MB
+	  RAM during compilation of busybox.
+
+	  This option is most likely only beneficial for newer compilers
+	  such as gcc-4.1 and above.
+
+	  Say 'N' unless you know what you are doing.
+
+endmenu
+
+menu 'Debugging Options'
+
+config BUSYBOX_CONFIG_DEBUG
+	bool "Build BusyBox with extra Debugging symbols"
+	default n
+	help
+	  Say Y here if you wish to examine BusyBox internals while applets are
+	  running.  This increases the size of the binary considerably, and
+	  should only be used when doing development.  If you are doing
+	  development and want to debug BusyBox, answer Y.
+
+	  Most people should answer N.
+
+config BUSYBOX_CONFIG_DEBUG_PESSIMIZE
+	bool "Disable compiler optimizations."
+	default n
+	depends on BUSYBOX_CONFIG_DEBUG
+	help
+	  The compiler's optimization of source code can eliminate and reorder
+	  code, resulting in an executable that's hard to understand when
+	  stepping through it with a debugger.  This switches it off, resulting
+	  in a much bigger executable that more closely matches the source
+	  code.
+
+choice
+	prompt "Additional debugging library"
+	default BUSYBOX_CONFIG_NO_DEBUG_LIB
+	depends on BUSYBOX_CONFIG_DEBUG
+	help
+	  Using an additional debugging library will make BusyBox become
+	  considerable larger and will cause it to run more slowly.  You
+	  should always leave this option disabled for production use.
+
+	  dmalloc support:
+	  ----------------
+	  This enables compiling with dmalloc ( http://dmalloc.com/ )
+	  which is an excellent public domain mem leak and malloc problem
+	  detector.  To enable dmalloc, before running busybox you will
+	  want to properly set your environment, for example:
+	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+	  The 'debug=' value is generated using the following command
+	    dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
+	       -p check-fence -p check-heap -p check-lists -p check-blank \
+	       -p check-funcs -p realloc-copy -p allow-free-null
+
+	  Electric-fence support:
+	  -----------------------
+	  This enables compiling with Electric-fence support.  Electric
+	  fence is another very useful malloc debugging library which uses
+	  your computer's virtual memory hardware to detect illegal memory
+	  accesses.  This support will make BusyBox be considerable larger
+	  and run slower, so you should leave this option disabled unless
+	  you are hunting a hard to find memory problem.
+
+
+config BUSYBOX_CONFIG_NO_DEBUG_LIB
+	bool "None"
+
+config BUSYBOX_CONFIG_DMALLOC
+	bool "Dmalloc"
+
+config BUSYBOX_CONFIG_EFENCE
+	bool "Electric-fence"
+
+endchoice
+
+config BUSYBOX_CONFIG_DEBUG_YANK_SUSv2
+	bool "Disable obsolete features removed before SUSv3?"
+	default y
+	help
+	  This option will disable backwards compatibility with SuSv2,
+	  specifically, old-style numeric options ('command -1 <file>')
+	  will not be supported in head, tail, and fold.  (Note: should
+	  yank from renice too.)
+
+endmenu
+
+menu 'Installation Options'
+
+config BUSYBOX_CONFIG_INSTALL_NO_USR
+	bool "Don't use /usr"
+	default n
+	help
+	  Disable use of /usr. Don't activate this option if you don't know
+	  that you really want this behaviour.
+
+choice
+       prompt "Applets links"
+       default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
+       help
+         Choose how you install applets links.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
+       bool "as soft-links"
+       help
+         Install applets as soft-links to the busybox binary. This needs some
+         free inodes on the filesystem, but might help with filesystem
+         generators that can't cope with hard-links.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS
+       bool "as hard-links"
+       help
+         Install applets as hard-links to the busybox binary. This might count
+         on a filesystem with few inodes.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_DONT
+       bool
+       prompt "not installed"
+       depends on BUSYBOX_CONFIG_FEATURE_INSTALLER || BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
+       help
+         Do not install applets links. Usefull when using the -install feature
+         or a standalone shell for rescue pruposes.
+
+endchoice
+
+config BUSYBOX_PREFIX
+	string
+	default "./_install"
+	help
+	  Define your directory to install BusyBox files/subdirs in.
+
+endmenu
+
+source package/busybox/config/libbb/Config.in
+
+endmenu
+
+comment "Applets"
+
+source package/busybox/config/archival/Config.in
+source package/busybox/config/coreutils/Config.in
+source package/busybox/config/console-tools/Config.in
+source package/busybox/config/debianutils/Config.in
+source package/busybox/config/editors/Config.in
+source package/busybox/config/findutils/Config.in
+source package/busybox/config/init/Config.in
+source package/busybox/config/loginutils/Config.in
+source package/busybox/config/e2fsprogs/Config.in
+source package/busybox/config/modutils/Config.in
+source package/busybox/config/util-linux/Config.in
+source package/busybox/config/miscutils/Config.in
+source package/busybox/config/networking/Config.in
+source package/busybox/config/procps/Config.in
+source package/busybox/config/shell/Config.in
+source package/busybox/config/sysklogd/Config.in
diff --git a/package/busybox/config/archival/Config.in b/package/busybox/config/archival/Config.in
new file mode 100644
index 0000000000..ac71d753a2
--- /dev/null
+++ b/package/busybox/config/archival/Config.in
@@ -0,0 +1,308 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Archival Utilities"
+
+config BUSYBOX_CONFIG_AR
+	bool "ar"
+	default n
+	help
+	  ar is an archival utility program used to create, modify, and
+	  extract contents from archives.  An archive is a single file holding
+	  a collection of other files in a structure that makes it possible to
+	  retrieve the original individual files (called archive members).
+	  The original files' contents, mode (permissions), timestamp, owner,
+	  and group are preserved in the archive, and can be restored on
+	  extraction.
+
+	  The stored filename is limited to 15 characters. (for more information
+	  see long filename support).
+	  ar has 60 bytes of overheads for every stored file.
+
+	  This implementation of ar can extract archives, it cannot create or
+	  modify them.
+	  On an x86 system, the ar applet adds about 1K.
+
+	  Unless you have a specific application which requires ar, you should
+	  probably say N here.
+
+config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES
+	bool "Enable support for long filenames (not need for debs)"
+	default n
+	depends on BUSYBOX_CONFIG_AR
+	help
+	  By default the ar format can only store the first 15 characters of the
+	  filename, this option removes that limitation.
+	  It supports the GNU ar long filename method which moves multiple long
+	  filenames into a the data section of a new ar entry.
+
+config BUSYBOX_CONFIG_BUNZIP2
+	bool "bunzip2"
+	default y
+	help
+	  bunzip2 is a compression utility using the Burrows-Wheeler block
+	  sorting text compression algorithm, and Huffman coding.  Compression
+	  is generally considerably better than that achieved by more
+	  conventional LZ77/LZ78-based compressors, and approaches the
+	  performance of the PPM family of statistical compressors.
+
+	  The BusyBox bunzip2 applet is limited to de-compression only.
+	  On an x86 system, this applet adds about 11K.
+
+	  Unless you have a specific application which requires bunzip2, you
+	  should probably say N here.
+
+config BUSYBOX_CONFIG_CPIO
+	bool "cpio"
+	default n
+	help
+	  cpio is an archival utility program used to create, modify, and extract
+	  contents from archives.
+	  cpio has 110 bytes of overheads for every stored file.
+
+	  This implementation of cpio can extract cpio archives created in the
+	  "newc" or "crc" format, it cannot create or modify them.
+
+	  Unless you have a specific application which requires cpio, you should
+	  probably say N here.
+
+config BUSYBOX_CONFIG_DPKG
+	bool "dpkg"
+	default n
+	help
+	  dpkg is a medium-level tool to install, build, remove and manage Debian packages.
+
+	  This implementation of dpkg has a number of limitations, you should use the
+	  official dpkg if possible.
+
+config BUSYBOX_CONFIG_DPKG_DEB
+	bool "dpkg_deb"
+	default n
+	help
+	  dpkg-deb packs, unpacks and provides information about Debian archives.
+
+	  This implementation of dpkg-deb cannot pack archives.
+
+	  Unless you have a specific application which requires dpkg-deb, you should
+	  probably say N here.
+
+config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY
+	bool "extract only (-x)"
+	default n
+	depends on BUSYBOX_CONFIG_DPKG_DEB
+	help
+	  This reduces dpkg-deb to the equivalent of "ar -p <deb> data.tar.gz | tar -zx".
+	  However it saves space as none of the extra dpkg-deb, ar or tar options are
+	  needed, they are linked to internally.
+
+config BUSYBOX_CONFIG_GUNZIP
+	bool "gunzip"
+	default y
+	help
+	  gunzip is used to decompress archives created by gzip.
+	  You can use the `-t' option to test the integrity of
+	  an archive, without decompressing it.
+
+config BUSYBOX_CONFIG_FEATURE_GUNZIP_UNCOMPRESS
+	bool "Uncompress support"
+	default y
+	depends on BUSYBOX_CONFIG_GUNZIP
+	help
+	  Enable if you want gunzip to have the ability to decompress
+	  archives created by the program compress (not much
+	  used anymore).
+
+config BUSYBOX_CONFIG_GZIP
+	bool "gzip"
+	default y
+	help
+	  gzip is used to compress files.
+	  It's probably the most widely used UNIX compression program.
+
+config BUSYBOX_CONFIG_IPKG
+	bool "ipkg"
+	default y
+	select BUSYBOX_CONFIG_MD5SUM
+	select BUSYBOX_CONFIG_WGET
+	help
+	  ipkg is the itsy package management system.
+	
+config BUSYBOX_CONFIG_RPM2CPIO
+	bool "rpm2cpio"
+	default n
+	help
+	  Converts an RPM file into a CPIO archive.
+
+config BUSYBOX_CONFIG_RPM
+	bool "rpm"
+	default n
+	help
+	  Mini RPM applet - queries and extracts
+
+config BUSYBOX_CONFIG_TAR
+	bool "tar"
+	default y
+	help
+	  tar is an archiving program. It's commonly used with gzip to
+	  create compressed archives. It's probably the most widely used
+	  UNIX archive program.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_CREATE
+	bool "Enable archive creation"
+	default y
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option you'll be able to create
+	  tar archives using the `-c' option.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_BZIP2
+	bool "Enable -j option to handle .tar.bz2 files"
+	default y
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option you'll be able to extract
+	  archives compressed with bzip2.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_LZMA
+	bool "Enable -a option to handle .tar.lzma files"
+	default n
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option you'll be able to extract
+	  archives compressed with lzma.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_FROM
+	bool "Enable -X (exclude from) and -T (include from) options)"
+	default y
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option you'll be able to specify
+	  a list of files to include or exclude from an archive.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_GZIP
+	bool "Enable -z option"
+	default y
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option tar will be able to call gzip,
+	  when creating or extracting tar gziped archives.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_COMPRESS
+	bool "Enable -Z option"
+	default n
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  If you enable this option tar will be able to call uncompress,
+	  when extracting .tar.Z archives.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
+	bool "Enable support for old tar header format"
+	default n
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  This option is required to unpack archives created in
+	  the old GNU format; help to kill this old format by
+	  repacking your ancient archives with the new format.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS
+	bool "Enable support for some GNU tar extensions"
+	default y
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  With this option busybox supports GNU long filenames and
+	  linknames.
+
+config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_TAR && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+		Enable use of long options, increases size by about 400 Bytes
+
+config BUSYBOX_CONFIG_UNCOMPRESS
+	bool "uncompress"
+	default n
+	help
+	  uncompress is used to decompress archives created by compress.
+	  Not much used anymore, replaced by gzip/gunzip.
+
+config BUSYBOX_CONFIG_UNLZMA
+	bool "unlzma"
+	default n
+	help
+	  unlzma is a compression utility using the Lempel-Ziv-Markov chain
+	  compression algorithm, and range coding.  Compression
+	  is generally considerably better than that achieved by the bzip2
+	  compressors.
+
+	  The BusyBox unlzma applet is limited to de-compression only.
+	  On an x86 system, this applet adds about 4K.
+
+	  Unless you have a specific application which requires unlzma, you
+	  should probably say N here.
+
+config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
+	bool "Optimze unlzma for speed"
+	default n
+	depends on BUSYBOX_CONFIG_UNLZMA
+	help
+	  This option reduces decompression time by about 33% at the cost of
+	  a 2K bigger binary.
+
+config BUSYBOX_CONFIG_UNZIP
+	bool "unzip"
+	default n
+	help
+	  unzip will list or extract files from a ZIP archive,
+	  commonly found on DOS/WIN systems. The default behavior
+	  (with no options) is to extract the archive into the
+	  current directory. Use the `-d' option to extract to a
+	  directory of your choice.
+
+comment "Common options for cpio and tar"
+	depends on BUSYBOX_CONFIG_CPIO || BUSYBOX_CONFIG_TAR
+
+config BUSYBOX_CONFIG_FEATURE_UNARCHIVE_TAPE
+	bool "Enable tape drive support"
+	default n
+	depends on BUSYBOX_CONFIG_CPIO || BUSYBOX_CONFIG_TAR
+	help
+	  I don't think this is needed anymore.
+
+comment "Common options for dpkg and dpkg_deb"
+	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
+
+config BUSYBOX_CONFIG_FEATURE_DEB_TAR_GZ
+	bool "gzip debian packages (normal)"
+	default n if BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
+	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
+	help
+	  This is the default compression method inside the debian ar file.
+
+	  If you want compatibility with standard .deb's you should say yes here.
+
+config BUSYBOX_CONFIG_FEATURE_DEB_TAR_BZ2
+	bool "bzip2 debian packages"
+	default n
+	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
+	help
+	  This allows dpkg and dpkg-deb to extract deb's that are compressed internally
+	  with bzip2 instead of gzip.
+
+	  You only want this if you are creating your own custom debian packages that
+	  use an internal control.tar.bz2 or data.tar.bz2.
+
+config BUSYBOX_CONFIG_FEATURE_DEB_TAR_LZMA
+	bool "lzma debian packages"
+	default n
+	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
+	help
+	  This allows dpkg and dpkg-deb to extract deb's that are compressed
+          internally with lzma instead of gzip.
+
+	  You only want this if you are creating your own custom debian
+          packages that use an internal control.tar.lzma or data.tar.lzma.
+
+endmenu
diff --git a/package/busybox/config/console-tools/Config.in b/package/busybox/config/console-tools/Config.in
new file mode 100644
index 0000000000..1efe300982
--- /dev/null
+++ b/package/busybox/config/console-tools/Config.in
@@ -0,0 +1,88 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Console Utilities"
+
+config BUSYBOX_CONFIG_CHVT
+	bool "chvt"
+	default n
+	help
+	  This program is used to change to another terminal.
+	  Example: chvt 4 (change to terminal /dev/tty4)
+
+config BUSYBOX_CONFIG_CLEAR
+	bool "clear"
+	default y
+	help
+	  This program clears the terminal screen.
+
+config BUSYBOX_CONFIG_DEALLOCVT
+	bool "deallocvt"
+	default n
+	help
+	  This program deallocates unused virtual consoles.
+
+config BUSYBOX_CONFIG_DUMPKMAP
+	bool "dumpkmap"
+	default n
+	help
+	  This program dumps the kernel's keyboard translation table to
+	  stdout, in binary format. You can then use loadkmap to load it.
+
+config BUSYBOX_CONFIG_LOADFONT
+	bool "loadfont"
+	default n
+	help
+	  This program loads a console font from standard input.
+
+config BUSYBOX_CONFIG_LOADKMAP
+	bool "loadkmap"
+	default n
+	help
+	  This program loads a keyboard translation table from
+	  standard input.
+
+config BUSYBOX_CONFIG_OPENVT
+	bool "openvt"
+	default n
+	help
+	  This program is used to start a command on an unused
+	  virtual terminal.
+
+config BUSYBOX_CONFIG_RESET
+	bool "reset"
+	default y
+	help
+	  This program is used to reset the terminal screen, if it
+	  gets messed up.
+
+config BUSYBOX_CONFIG_SETCONSOLE
+	bool "setconsole"
+	default n
+	help
+	  This program redirects the system console to another device,
+	  like the current tty while logged in via telnet.
+
+config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_SET_CONSOLE && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the setconsole applet.
+
+config BUSYBOX_CONFIG_SETKEYCODES
+	bool "setkeycodes"
+	default n
+	help
+	  This program loads entries into the kernel's scancode-to-keycode
+	  map, allowing unusual keyboards to generate usable keycodes.
+
+config BUSYBOX_CONFIG_SETLOGCONS
+	bool "setlogcons"
+	default n
+	help
+	  This program redirects the output console of kernel messages.
+
+endmenu
diff --git a/package/busybox/config/coreutils/Config.in b/package/busybox/config/coreutils/Config.in
new file mode 100644
index 0000000000..3487fc742c
--- /dev/null
+++ b/package/busybox/config/coreutils/Config.in
@@ -0,0 +1,775 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Coreutils"
+
+config BUSYBOX_CONFIG_BASENAME
+	bool "basename"
+	default y
+	help
+	  basename is used to strip the directory and suffix from filenames,
+	  leaving just the filename itself.  Enable this option if you wish
+	  to enable the 'basename' utility.
+
+config BUSYBOX_CONFIG_CAL
+	bool "cal"
+	default n
+	help
+	  cal is used to display a monthly calender.
+
+config BUSYBOX_CONFIG_CAT
+	bool "cat"
+	default y
+	help
+	  cat is used to concatenate files and print them to the standard
+	  output.  Enable this option if you wish to enable the 'cat' utility.
+
+config BUSYBOX_CONFIG_CATV
+	bool "catv"
+	default n
+	help
+	  Display nonprinting characters as escape sequences (like some
+	  implementations' cat -v option).
+
+config BUSYBOX_CONFIG_CHGRP
+	bool "chgrp"
+	default y
+	help
+	  chgrp is used to change the group ownership of files.
+
+config BUSYBOX_CONFIG_CHMOD
+	bool "chmod"
+	default y
+	help
+	  chmod is used to change the access permission of files.
+
+config BUSYBOX_CONFIG_CHOWN
+	bool "chown"
+	default y
+	help
+	  chown is used to change the user and/or group ownership
+	  of files.
+
+config BUSYBOX_CONFIG_CHROOT
+	bool "chroot"
+	default y
+	help
+	  chroot is used to change the root directory and run a command.
+	  The default command is `/bin/sh'.
+
+config BUSYBOX_CONFIG_CKSUM
+	bool "cksum"
+	default n
+	help
+	  cksum is used to calculate the CRC32 checksum of a file.
+
+config BUSYBOX_CONFIG_CMP
+	bool "cmp"
+	default n
+	help
+	  cmp is used to compare two files and returns the result
+	  to standard output.
+
+config BUSYBOX_CONFIG_COMM
+	bool "comm"
+	default n
+	help
+	  comm is used to compare two files line by line and return
+	  a three-column output.
+
+config BUSYBOX_CONFIG_CP
+	bool "cp"
+	default y
+	help
+	  cp is used to copy files and directories.
+
+config BUSYBOX_CONFIG_CUT
+	bool "cut"
+	default y
+	help
+	  cut is used to print selected parts of lines from
+	  each file to stdout.
+
+config BUSYBOX_CONFIG_DATE
+	bool "date"
+	default y
+	help
+	  date is used to set the system date or display the
+	  current time in the given format.
+
+config BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT
+	bool "Enable ISO date format output (-I)"
+	default y
+	depends on BUSYBOX_CONFIG_DATE
+	help
+	  Enable option (-I) to output an ISO-8601 compliant
+	  date/time string.
+
+config BUSYBOX_CONFIG_DD
+	bool "dd"
+	default y
+	help
+	  dd copies a file (from standard input to standard output,
+	  by default) using specific input and output blocksizes,
+	  while optionally performing conversions on it.
+
+config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
+	bool "Enable DD signal handling for status reporting"
+	default y
+	depends on BUSYBOX_CONFIG_DD
+	help
+	  sending a SIGUSR1 signal to a running `dd' process makes it 
+	  print to standard error the number of records read and written 
+	  so far, then to resume copying.
+
+	  $ dd if=/dev/zero of=/dev/null& pid=$! $ kill -USR1 $pid; sleep 1; kill $pid 
+	  10899206+0 records in 10899206+0 records out
+
+config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
+	bool "Enable ibs, obs and conv options"
+	default n
+	depends on BUSYBOX_CONFIG_DD
+	help
+	  Enables support for writing a certain number of bytes in and out,
+	  at a time, and performing conversions on the data stream.
+
+config BUSYBOX_CONFIG_DF
+	bool "df"
+	default y
+	help
+	  df reports the amount of disk space used and available
+	  on filesystems.
+
+config BUSYBOX_CONFIG_DIFF
+	bool "diff"
+	default n
+	help
+	  diff compares two files or directories and outputs the
+	  differences between them in a form that can be given to
+	  the patch command.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_BINARY
+	bool "Enable checks for binary files"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  This option enables support for checking for binary files
+	  before a comparison is carried out.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
+	bool "Enable directory support"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  This option enables support for directory and subdirectory
+	  comparison.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_MINIMAL
+	bool "Enable -d option to find smaller sets of changes"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  Enabling this option allows the use of -d to make diff
+	  try hard to find the smallest possible set of changes.
+
+config BUSYBOX_CONFIG_DIRNAME
+	bool "dirname"
+	default y
+	help
+	  dirname is used to strip a non-directory suffix from
+	  a file name.
+
+config BUSYBOX_CONFIG_DOS2UNIX
+	bool "dos2unix/unix2dos"
+	default n
+	help
+	  dos2unix is used to convert a text file from DOS format to
+	  UNIX format, and vice versa.
+
+config BUSYBOX_CONFIG_UNIX2DOS
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_DOS2UNIX
+	help
+	  unix2dos is used to convert a text file from UNIX format to
+	  DOS format, and vice versa.
+
+config BUSYBOX_CONFIG_DU
+	bool "du (default blocksize of 512 bytes)"
+	default y
+	help
+	  du is used to report the amount of disk space used
+	  for specified files.
+
+config BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
+	bool "Use a default blocksize of 1024 bytes (1K)"
+	default y
+	depends on BUSYBOX_CONFIG_DU
+	help
+	  Use a blocksize of (1K) instead of the default 512b.
+
+config BUSYBOX_CONFIG_ECHO
+	bool "echo (basic SuSv3 version taking no options)"
+	default y
+	help
+	  echo is used to print a specified string to stdout.
+
+# this entry also appears in shell/Config.in, next to the echo builtin
+config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO
+	bool "Enable echo options (-n and -e)"
+	default y
+	depends on BUSYBOX_CONFIG_ECHO
+	help
+	  This adds options (-n and -e) to echo.
+
+config BUSYBOX_CONFIG_ENV
+	bool "env"
+	default y
+	help
+	  env is used to set an environment variable and run
+	  a command; without options it displays the current
+	  environment.
+
+config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_ENV && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the env applet.
+
+config BUSYBOX_CONFIG_EXPR
+	bool "expr"
+	default y
+	help
+	  expr is used to calculate numbers and print the result
+	  to standard output.
+
+config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64
+	bool "Extend Posix numbers support to 64 bit"
+	default n
+	depends on BUSYBOX_CONFIG_EXPR
+	help
+	  Enable 64-bit math support in the expr applet.  This will make
+	  the applet slightly larger, but will allow computation with very
+	  large numbers.
+
+config BUSYBOX_CONFIG_FALSE
+	bool "false"
+	default y
+	help
+	  false returns an exit code of FALSE (1).
+
+config BUSYBOX_CONFIG_FOLD
+	bool "fold"
+	default n
+	help
+	  Wrap text to fit a specific width.
+
+config BUSYBOX_CONFIG_HEAD
+	bool "head"
+	default y
+	help
+	  head is used to print the first specified number of lines
+	  from files.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD
+	bool "Enable head options (-c, -q, and -v)"
+	default y
+	depends on BUSYBOX_CONFIG_HEAD
+	help
+	  This enables the head options (-c, -q, and -v).
+
+config BUSYBOX_CONFIG_HOSTID
+	bool "hostid"
+	default y
+	help
+	  hostid prints the numeric identifier (in hexadecimal) for
+	  the current host.
+
+config BUSYBOX_CONFIG_ID
+	bool "id"
+	default y
+	help
+	  id displays the current user and group ID names.
+
+config BUSYBOX_CONFIG_INSTALL
+	bool "install"
+	default n
+	help
+	  Copy files and set attributes.
+
+config BUSYBOX_CONFIG_FEATURE_INSTALL_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_INSTALL && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the install applet.
+
+config BUSYBOX_CONFIG_LENGTH
+	bool "length"
+	default y
+	help
+	  length is used to print out the length of a specified string.
+
+config BUSYBOX_CONFIG_LN
+	bool "ln"
+	default y
+	help
+	  ln is used to create hard or soft links between files.
+
+config BUSYBOX_CONFIG_LOGNAME
+	bool "logname"
+	default n
+	help
+	  logname is used to print the current user's login name.
+
+config BUSYBOX_CONFIG_LS
+	bool "ls"
+	default y
+	help
+	  ls is used to list the contents of directories.
+
+config BUSYBOX_CONFIG_FEATURE_LS_FILETYPES
+	bool "Enable filetyping options (-p and -F)"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Enable the ls options (-p and -F).
+
+config BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS
+	bool "Enable symlinks dereferencing (-L)"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Enable the ls option (-L).
+
+config BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE
+	bool "Enable recursion (-R)"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Enable the ls option (-R).
+
+config BUSYBOX_CONFIG_FEATURE_LS_SORTFILES
+	bool "Sort the file names"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Allow ls to sort file names alphabetically.
+
+config BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS
+	bool "Show file timestamps"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Allow ls to display timestamps for files.
+
+config BUSYBOX_CONFIG_FEATURE_LS_USERNAME
+	bool "Show username/groupnames"
+	default y
+	depends on BUSYBOX_CONFIG_LS
+	help
+	  Allow ls to display username/groupname for files.
+
+config BUSYBOX_CONFIG_FEATURE_LS_COLOR
+	bool "Allow use of color to identify file types"
+	default y
+	depends on BUSYBOX_CONFIG_LS && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  This enables the --color option to ls.
+
+config BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT
+	bool "Produce colored ls output by default"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_LS_COLOR
+	help
+	  Saying yes here will turn coloring on by default,
+	  even if no "--color" option is given to the ls command.
+	  This is not recommended, since the colors are not
+	  configurable, and the output may not be legible on
+	  many output screens.
+
+config BUSYBOX_CONFIG_MD5SUM
+	bool "md5sum"
+	default y
+	help
+	  md5sum is used to print or check MD5 checksums.
+
+config BUSYBOX_CONFIG_MKDIR
+	bool "mkdir"
+	default y
+	help
+	  mkdir is used to create directories with the specified names.
+
+config BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_MKDIR && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the mkdir applet.
+
+config BUSYBOX_CONFIG_MKFIFO
+	bool "mkfifo"
+	default y
+	help
+	  mkfifo is used to create FIFOs (named pipes).
+	  The `mknod' program can also create FIFOs.
+
+config BUSYBOX_CONFIG_MKNOD
+	bool "mknod"
+	default y
+	help
+	  mknod is used to create FIFOs or block/character special
+	  files with the specified names.
+
+config BUSYBOX_CONFIG_MV
+	bool "mv"
+	default y
+	help
+	  mv is used to move or rename files or directories.
+
+config BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_MV && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the mv applet.
+
+config BUSYBOX_CONFIG_NICE
+	bool "nice"
+	default n
+	help
+	  nice runs a program with modified scheduling priority.
+
+config BUSYBOX_CONFIG_NOHUP
+	bool "nohup"
+	default n
+	help
+	  run a command immune to hangups, with output to a non-tty.
+
+config BUSYBOX_CONFIG_OD
+	bool "od"
+	default n
+	help
+	  od is used to dump binary files in octal and other formats.
+
+config BUSYBOX_CONFIG_PRINTENV
+	bool "printenv"
+	default n
+	help
+	  printenv is used to print all or part of environment.
+
+config BUSYBOX_CONFIG_PRINTF
+	bool "printf"
+	default y
+	help
+	  printf is used to format and print specified strings.
+	  It's similar to `echo' except it has more options.
+
+config BUSYBOX_CONFIG_PWD
+	bool "pwd"
+	default y
+	help
+	  pwd is used to print the current directory.
+
+config BUSYBOX_CONFIG_REALPATH
+	bool "realpath"
+	default n
+	help
+	  Return the canonicalized absolute pathname.
+	  This isn't provided by GNU shellutils, but where else does it belong.
+
+config BUSYBOX_CONFIG_RM
+	bool "rm"
+	default y
+	help
+	  rm is used to remove files or directories.
+
+config BUSYBOX_CONFIG_RMDIR
+	bool "rmdir"
+	default y
+	help
+	  rmdir is used to remove empty directories.
+
+config BUSYBOX_CONFIG_SEQ
+	bool "seq"
+	default y
+	help
+	  print a sequence of numbers
+
+config BUSYBOX_CONFIG_SHA1SUM
+	bool "sha1sum"
+	default n
+	help
+	  Compute and check SHA1 message digest
+
+config BUSYBOX_CONFIG_SLEEP
+	bool "sleep (single integer arg with no suffix)"
+	default y
+	help
+	  sleep is used to pause for a specified number of seconds,
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
+	bool "Enable multiple integer args and optional time suffixes"
+	default y
+	depends on BUSYBOX_CONFIG_SLEEP
+	help
+	  Allow sleep to pause for specified minutes, hours, and days.
+
+config BUSYBOX_CONFIG_SORT
+	bool "sort"
+	default y
+	help
+	  sort is used to sort lines of text in specified files.
+
+config BUSYBOX_CONFIG_FEATURE_SORT_BIG
+	bool "full SuSv3 compliant sort (Support -ktcsbdfiozgM)"
+	default n
+	depends on BUSYBOX_CONFIG_SORT
+	help
+	  Without this, sort only supports  -r, -u, and an integer version
+	  of -n.  Selecting this adds sort keys, floating point support, and
+	  more.  This adds a little over 3k to a nonstatic build on x86.
+
+	  The SuSv3 sort standard is available at:
+	  http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+
+config BUSYBOX_CONFIG_STAT
+	bool "stat"
+	default n
+	help
+	  display file or filesystem status.
+
+config BUSYBOX_CONFIG_FEATURE_STAT_FORMAT
+	bool "Enable custom formats (-c)"
+	default n
+	depends on BUSYBOX_CONFIG_STAT
+	help
+	  Without this, stat will not support the '-c format' option where
+	  users can pass a custom format string for output.  This adds about
+	  7k to a nonstatic build on amd64.
+
+config BUSYBOX_CONFIG_STTY
+	bool "stty"
+	default n
+	help
+	  stty is used to change and print terminal line settings.
+
+config BUSYBOX_CONFIG_SUM
+	bool "sum"
+	default n
+	help
+	  checksum and count the blocks in a file
+
+config BUSYBOX_CONFIG_SYNC
+	bool "sync"
+	default y
+	help
+	  sync is used to flush filesystem buffers.
+
+config BUSYBOX_CONFIG_TAIL
+	bool "tail"
+	default y
+	help
+	  tail is used to print the last specified number of lines
+	  from files.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_TAIL
+	bool "Enable extra tail options (-q, -s, and -v)"
+	default y
+	depends on BUSYBOX_CONFIG_TAIL
+	help
+	  The options (-q, -s, and -v) are provided by GNU tail, but
+	  are not specific in the SUSv3 standard.
+
+config BUSYBOX_CONFIG_TEE
+	bool "tee"
+	default y
+	help
+	  tee is used to read from standard input and write
+	  to standard output and files.
+
+config BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO
+	bool "Enable block i/o (larger/faster) instead of byte i/o."
+	default y
+	depends on BUSYBOX_CONFIG_TEE
+	help
+	  Enable this option for a faster tee, at expense of size.
+
+config BUSYBOX_CONFIG_TEST
+	bool "test"
+	default y
+	help
+	  test is used to check file types and compare values,
+	  returning an appropriate exit code.  The bash shell
+	  has test built in, ash can build it in optionally.
+
+config BUSYBOX_CONFIG_FEATURE_TEST_64
+	bool "Extend test to 64 bit"
+	default n
+	depends on BUSYBOX_CONFIG_TEST
+	help
+	  Enable 64-bit support in test.
+
+config BUSYBOX_CONFIG_TOUCH
+	bool "touch"
+	default y
+	help
+	  touch is used to create or change the access and/or
+	  modification timestamp of specified files.
+
+config BUSYBOX_CONFIG_TR
+	bool "tr"
+	default y
+	help
+	  tr is used to squeeze, and/or delete characters from standard
+	  input, writing to standard output.
+
+config BUSYBOX_CONFIG_FEATURE_TR_CLASSES
+	bool "Enable character classes (such as [:upper:])"
+	default n
+	depends on BUSYBOX_CONFIG_TR
+	help
+	  Enable character classes, enabling commands such as:
+	  tr [:upper:] [:lower:] to convert input into lowercase.
+
+config BUSYBOX_CONFIG_FEATURE_TR_EQUIV
+	bool "Enable equivalence classes"
+	default n
+	depends on BUSYBOX_CONFIG_TR
+	help
+	  Enable equivalence classes, which essentially add the enclosed
+	  character to the current set. For instance, tr [=a=] xyz would
+	  replace all instances of 'a' with 'xyz'. This option is mainly
+	  useful for cases when no other way of expressing a character
+	  is possible.
+
+config BUSYBOX_CONFIG_TRUE
+	bool "true"
+	default y
+	help
+	  true returns an exit code of TRUE (0).
+
+config BUSYBOX_CONFIG_TTY
+	bool "tty"
+	default n
+	help
+	  tty is used to print the name of the current terminal to
+	  standard output.
+
+config BUSYBOX_CONFIG_UNAME
+	bool "uname"
+	default y
+	help
+	  uname is used to print system information.
+
+config BUSYBOX_CONFIG_UNIQ
+	bool "uniq"
+	default y
+	help
+	  uniq is used to remove duplicate lines from a sorted file.
+
+config BUSYBOX_CONFIG_USLEEP
+	bool "usleep"
+	default n
+	help
+	  usleep is used to pause for a specified number of microseconds.
+
+config BUSYBOX_CONFIG_UUDECODE
+	bool "uudecode"
+	default n
+	help
+	  uudecode is used to decode a uuencoded file.
+
+config BUSYBOX_CONFIG_UUENCODE
+	bool "uuencode"
+	default n
+	help
+	  uuencode is used to uuencode a file.
+
+config BUSYBOX_CONFIG_WATCH
+	bool "watch"
+	default n
+	select BUSYBOX_CONFIG_DATE
+	help
+	  watch is used to execute a program periodically, showing
+	  output to the screen.
+
+config BUSYBOX_CONFIG_WC
+	bool "wc"
+	default y
+	help
+	  wc is used to print the number of bytes, words, and lines,
+	  in specified files.
+
+config BUSYBOX_CONFIG_WHO
+	bool "who"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_UTMP
+	help
+	  who is used to show who is logged on.
+
+config BUSYBOX_CONFIG_WHOAMI
+	bool "whoami"
+	default n
+	help
+	  whoami is used to print the username of the current
+	  user id (same as id -un).
+
+config BUSYBOX_CONFIG_YES
+	bool "yes"
+	default y
+	help
+	  yes is used to repeatedly output a specific string, or
+	  the default string `y'.
+
+comment "Common options for cp and mv"
+	depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
+
+config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS
+	bool "Preserve hard links"
+	default y
+	depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
+	help
+	  Allow cp and mv to preserve hard links.
+
+comment "Common options for ls, more and telnet"
+	depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET
+
+config BUSYBOX_CONFIG_FEATURE_AUTOWIDTH
+	bool "Calculate terminal & column widths"
+	default y
+	depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET
+	help
+	  This option allows utilities such as 'ls', 'more' and 'telnet'
+	  to determine the width of the screen, which can allow them to 
+	  display additional text or avoid wrapping text onto the next line.
+	  If you leave this disabled, your utilities will be especially 
+	  primitive and will be unable to determine the current screen width.
+
+comment "Common options for df, du, ls"
+	depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
+
+config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE
+	bool "Support for human readable output (example 13k, 23M, 235G)"
+	default y
+	depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
+	help
+	  Allow df, du, and ls to have human readable output.
+
+comment "Common options for md5sum, sha1sum"
+	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM
+
+config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
+	bool "Enable -c, -s and -w options"
+	default y
+	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM
+	help
+	  Enabling the -c options allows files to be checked
+	  against pre-calculated hash values.
+
+	  -s and -w are useful options when verifying checksums.
+
+endmenu
diff --git a/package/busybox/config/debianutils/Config.in b/package/busybox/config/debianutils/Config.in
new file mode 100644
index 0000000000..bc98103c72
--- /dev/null
+++ b/package/busybox/config/debianutils/Config.in
@@ -0,0 +1,88 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Debian Utilities"
+
+config BUSYBOX_CONFIG_MKTEMP
+	bool "mktemp"
+	default y
+	help
+	  mktemp is used to create unique temporary files
+
+config BUSYBOX_CONFIG_PIPE_PROGRESS
+	bool "pipe_progress"
+	default n
+	help
+	  Display a dot to indicate pipe activity.
+
+config BUSYBOX_CONFIG_READLINK
+	bool "readlink"
+	default n
+	help
+	  This program reads a symbolic link and returns the name
+	  of the file it points to
+
+config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW
+	bool "Enable canonicalization by following all symlinks (-f)"
+	default n
+	depends on BUSYBOX_CONFIG_READLINK
+	help
+	  Enable the readlink option (-f).
+
+config BUSYBOX_CONFIG_RUN_PARTS
+	bool "run-parts"
+	default n
+	help
+	  run-parts is a utility designed to run all the scripts in a directory.
+
+	  It is useful to set up a directory like cron.daily, where you need to
+	  execute all the scripts in that directory.
+
+	  In this implementation of run-parts some features (such as report mode)
+	  are not implemented.
+
+	  Unless you know that run-parts is used in some of your scripts
+	  you can safely say N here.
+
+config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_RUN_PARTS && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the run-parts applet.
+
+config BUSYBOX_CONFIG_START_STOP_DAEMON
+	bool "start-stop-daemon"
+	default n
+	help
+	  start-stop-daemon is used to control the creation and
+	  termination of system-level processes, usually the ones
+	  started during the startup of the system.
+
+config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_FANCY
+	bool "Support additional arguments"
+	default n
+	depends on BUSYBOX_CONFIG_START_STOP_DAEMON
+	help
+	  Support additional arguments.
+	  -o|--oknodo ignored since we exit with 0 anyway
+	  -v|--verbose
+
+config BUSYBOX_CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_START_STOP_DAEMON && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the start-stop-daemon applet.
+
+config BUSYBOX_CONFIG_WHICH
+	bool "which"
+	default y
+	help
+	  which is used to find programs in your PATH and
+	  print out their pathnames.
+
+endmenu
+
diff --git a/package/busybox/config/e2fsprogs/Config.in b/package/busybox/config/e2fsprogs/Config.in
new file mode 100644
index 0000000000..e9ef3dc041
--- /dev/null
+++ b/package/busybox/config/e2fsprogs/Config.in
@@ -0,0 +1,67 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Linux Ext2 FS Progs"
+
+config BUSYBOX_CONFIG_CHATTR
+	bool "chattr"
+	default n
+	help
+	  chattr changes the file attributes on a second extended file system.
+
+config BUSYBOX_CONFIG_E2FSCK
+	bool "e2fsck"
+	default n
+	help
+	  e2fsck is used to check Linux second extended file systems (ext2fs).
+	  e2fsck also supports ext2 filesystems countaining a journal (ext3).
+	  The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also
+	  provided.
+
+config BUSYBOX_CONFIG_FSCK
+	bool "fsck"
+	default n
+	help
+	  fsck is used to check and optionally repair one or more filesystems.
+	  In actuality, fsck is simply a front-end for the various file system
+	  checkers (fsck.fstype) available under Linux.
+
+config BUSYBOX_CONFIG_LSATTR
+	bool "lsattr"
+	default n
+	help
+	  lsattr lists the file attributes on a second extended file system.
+
+config BUSYBOX_CONFIG_MKE2FS
+	bool "mke2fs"
+	default n
+	help
+	  mke2fs is used to create an ext2/ext3 filesystem.  The normal compat
+	  symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
+
+config BUSYBOX_CONFIG_TUNE2FS
+	bool "tune2fs"
+	default n
+	help
+	  tune2fs allows the system administrator to adjust various tunable
+	  filesystem parameters on Linux ext2/ext3 filesystems.
+
+config BUSYBOX_CONFIG_E2LABEL
+	bool "e2label"
+	default n
+	depends on BUSYBOX_CONFIG_TUNE2FS
+	help
+	  e2label will display or change the filesystem label on the ext2
+	  filesystem located on device.
+
+config BUSYBOX_CONFIG_FINDFS
+	bool "findfs"
+	default n
+	depends on BUSYBOX_CONFIG_TUNE2FS
+	help
+	  findfs will search the disks in the system looking for a filesystem
+	  which has a label matching label or a UUID equal to uuid.
+
+endmenu
diff --git a/package/busybox/config/editors/Config.in b/package/busybox/config/editors/Config.in
new file mode 100644
index 0000000000..3c1a320bc3
--- /dev/null
+++ b/package/busybox/config/editors/Config.in
@@ -0,0 +1,131 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Editors"
+
+config BUSYBOX_CONFIG_AWK
+	bool "awk"
+	default y
+	help
+	  Awk is used as a pattern scanning and processing language.  This is
+	  the BusyBox implementation of that programming language.
+
+config BUSYBOX_CONFIG_FEATURE_AWK_MATH
+	bool "Enable math functions (requires libm)"
+	default y
+	depends on BUSYBOX_CONFIG_AWK
+	help
+	  Enable math functions of the Awk programming language.
+	  NOTE: This will require libm to be present for linking.
+
+config BUSYBOX_CONFIG_ED
+	bool "ed"
+	default n
+	help
+	  The original 1970's Unix text editor, from the days of teletypes.
+	  Small, simple, evil.  Part of SUSv3.  If you're not already using
+	  this, you don't need it.
+
+config BUSYBOX_CONFIG_PATCH
+	bool "patch"
+	default n
+	help
+	  Apply a unified diff formatted patch.
+
+config BUSYBOX_CONFIG_SED
+	bool "sed"
+	default y
+	help
+	  sed is used to perform text transformations on a file
+	  or input from a pipeline.
+
+config BUSYBOX_CONFIG_VI
+	bool "vi"
+	default y
+	help
+	  'vi' is a text editor.  More specifically, it is the One True
+	  text editor <grin>.  It does, however, have a rather steep
+	  learning curve.  If you are not already comfortable with 'vi'
+	  you may wish to use something else.
+
+config BUSYBOX_CONFIG_FEATURE_VI_COLON
+	bool "Enable \":\" colon commands (no \"ex\" mode)"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Enable a limited set of colon commands for vi.  This does not
+	  provide an "ex" mode.
+
+config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK
+	bool "Enable yank/put commands and mark cmds"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  This will enable you to use yank and put, as well as mark in
+	  busybox vi.
+
+config BUSYBOX_CONFIG_FEATURE_VI_SEARCH
+	bool "Enable search and replace cmds"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Select this if you wish to be able to do search and replace in
+	  busybox vi.
+
+config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS
+	bool "Catch signals"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Selecting this option will make busybox vi signal aware.  This will
+	  make busybox vi support SIGWINCH to deal with Window Changes, catch
+	  Ctrl-Z and Ctrl-C and alarms.
+
+config BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD
+	bool "Remember previous cmd and \".\" cmd"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Make busybox vi remember the last command and be able to repeat it.
+
+config BUSYBOX_CONFIG_FEATURE_VI_READONLY
+	bool "Enable -R option and \"view\" mode"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Enable the read-only command line option, which allows the user to
+	  open a file in read-only mode.
+
+config BUSYBOX_CONFIG_FEATURE_VI_SETOPTS
+	bool "Enable set-able options, ai ic showmatch"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Enable the editor to set some (ai, ic, showmatch) options.
+
+config BUSYBOX_CONFIG_FEATURE_VI_SET
+	bool "Support for :set"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Support for ":set".
+
+config BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE
+	bool "Handle window resize"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  Make busybox vi behave nicely with terminals that get resized.
+
+config BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR
+	bool "Optimize cursor movement"
+	default y
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  This will make the cursor movement faster, but requires more memory
+	  and it makes the applet a tiny bit larger.
+
+endmenu
+
diff --git a/package/busybox/config/findutils/Config.in b/package/busybox/config/findutils/Config.in
new file mode 100644
index 0000000000..e708259888
--- /dev/null
+++ b/package/busybox/config/findutils/Config.in
@@ -0,0 +1,159 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Finding Utilities"
+
+config BUSYBOX_CONFIG_FIND
+	bool "find"
+	default y
+	help
+	  find is used to search your system to find specified files.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_PRINT0
+	bool "Enable -print0 option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Causes output names to be separated by a null character
+	  rather than a newline.  This allows names that contain
+	  newlines and other whitespace to be more easily
+	  interpreted by other programs.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_MTIME
+	bool "Enable modified time matching (-mtime) option"
+	default n
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Allow searching based on the modification time of
+	  files, in days.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_MMIN
+	bool "Enable modified time matching (-min) option"
+	default n
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Allow searching based on the modification time of
+	  files, in minutes.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_PERM
+	bool "Enable permissions matching (-perm) option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Enable searching based on file permissions.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_TYPE
+	bool "Enable filetype matching (-type) option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Enable searching based on file type (file,
+	  directory, socket, device, etc.).
+
+config BUSYBOX_CONFIG_FEATURE_FIND_XDEV
+	bool "Enable stay in filesystem (-xdev) option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  This option will allow find to restrict searches to a single
+	  filesystem.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_NEWER
+	bool "Enable -newer option for comparing file mtimes"
+	default n
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -newer' option for finding any files which have
+	  a modified time that is more recent than the specified FILE.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_INUM
+	bool "Enable inode number matching (-inum) option"
+	default n
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -inum' option for searching by inode number.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_EXEC
+	bool "Enable (-exec) option allowing execution of commands"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -exec' option for executing commands based upon
+	  the files matched.
+
+config BUSYBOX_CONFIG_GREP
+	bool "grep"
+	default y
+	help
+	  grep is used to search files for a specified pattern.
+
+config BUSYBOX_CONFIG_FEATURE_GREP_EGREP_ALIAS
+	bool "Support extended regular expressions (egrep & grep -E)"
+	default y
+	depends on BUSYBOX_CONFIG_GREP
+	help
+	  Enabled support for extended regular expressions.  Extended
+	  regular expressions allow for alternation (foo|bar), grouping,
+	  and various repetition operators.
+
+config BUSYBOX_CONFIG_FEATURE_GREP_FGREP_ALIAS
+	bool "Alias fgrep to grep -F"
+	default y
+	depends on BUSYBOX_CONFIG_GREP
+	help
+	  fgrep sees the search pattern as a normal string rather than
+	  regular expressions.
+	  grep -F is always builtin, this just creates the fgrep alias.
+
+config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT
+	bool "Enable before and after context flags (-A, -B and -C)"
+	default y
+	depends on BUSYBOX_CONFIG_GREP
+	help
+	  Print the specified number of leading (-B) and/or trailing (-A)
+	  context surrounding our matching lines.
+	  Print the specified number of context lines (-C).
+
+config BUSYBOX_CONFIG_XARGS
+	bool "xargs"
+	default y
+	help
+	  xargs is used to execute a specified command on
+	  every item from standard input.
+
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION
+	bool "Enable prompt and confirmation option -p"
+	default y
+	depends on BUSYBOX_CONFIG_XARGS
+	help
+	  Support prompt the user about whether to run each command
+	  line and read a line from the terminal.
+
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES
+	bool "Enable support single and double quotes and backslash"
+	default y
+	depends on BUSYBOX_CONFIG_XARGS
+	help
+	  Default xargs unsupport single and double quotes
+	  and backslash for can use aruments with spaces.
+
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT
+	bool "Enable support options -x"
+	default y
+	depends on BUSYBOX_CONFIG_XARGS
+	help
+	  Enable support exit if the size (see the -s or -n option)
+	  is exceeded.
+
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM
+	bool "Enable options -0"
+	default y
+	depends on BUSYBOX_CONFIG_XARGS
+	help
+	  Enable input filenames are terminated by a null character
+	  instead of by whitespace, and the quotes and backslash
+	  are not special.
+
+endmenu
diff --git a/package/busybox/config/init/Config.in b/package/busybox/config/init/Config.in
new file mode 100644
index 0000000000..3696f7017f
--- /dev/null
+++ b/package/busybox/config/init/Config.in
@@ -0,0 +1,83 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Init Utilities"
+
+config BUSYBOX_CONFIG_INIT
+	bool "init"
+	default y
+	help
+	  init is the first program run when the system boots.
+
+config BUSYBOX_CONFIG_DEBUG_INIT
+	bool "debugging aid"
+	default n
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  Turn this on to disable all the dangerous
+	  rebooting stuff when debugging.
+
+config BUSYBOX_CONFIG_FEATURE_USE_INITTAB
+	bool "Support reading an inittab file"
+	default y
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  Allow init to read an inittab file when the system boot.
+
+config BUSYBOX_CONFIG_FEATURE_INIT_SCTTY
+	bool "Support running commands with a controlling-tty"
+	default n
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  If this option is enabled a command starting with hyphen (-)
+	  is run in its own session (setsid(2)) and possibly with a
+	  controlling tty (TIOCSCTTY).  This is not the traditional init
+	  behavour, but is often what you want in an embedded system where
+	  the console is only accessed during development or for maintenance.
+
+config BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET
+	bool "Be _extra_ quiet on boot"
+	default n
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  Prevent init from logging some messages to the console during boot.
+
+config BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS
+	bool "Support dumping core for child processes (debugging only)"
+	default n
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  If this option is enabled and the file /.init_enable_core
+	  exists, then init will call setrlimit() to allow unlimited
+	  core file sizes.  If this option is disabled, processes
+	  will not generate any core files.
+
+
+
+config BUSYBOX_CONFIG_FEATURE_INITRD
+	bool "Support running init from within an initrd (not initramfs)"
+	default n
+	depends on BUSYBOX_CONFIG_INIT
+	help
+	  Legacy support for running init under the old-style initrd.  Allows
+	  the name linuxrc to act as init, and it doesn't assume init is PID 1.
+
+	  This does not apply to initramfs, which runs /init as PID 1 and
+	  requires no special support.
+
+config BUSYBOX_CONFIG_HALT
+	bool "poweroff, halt, and reboot"
+	default y
+	help
+	  Stop all processes and either halt, reboot, or power off the system.
+
+config BUSYBOX_CONFIG_MESG
+	bool "mesg"
+	default y
+	help
+	  Mesg controls access to your terminal by others.  It is typically
+	  used to allow or disallow other users to write to your terminal
+
+endmenu
diff --git a/package/busybox/config/libbb/Config.in b/package/busybox/config/libbb/Config.in
new file mode 100644
index 0000000000..7d84a75962
--- /dev/null
+++ b/package/busybox/config/libbb/Config.in
@@ -0,0 +1,22 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Busybox Library Tuning"
+
+config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
+	int " MD5: Trade Bytes for Speed"
+	default 2
+	range 0 3
+	help
+	  Trade binary size versus speed for the md5sum algorithm.
+	  Approximate values running uClibc and hashing
+	  linux-2.4.4.tar.bz2 were:
+	                    user times (sec)  text size (386)
+	  0 (fastest)         1.1                6144
+	  1                   1.4                5392
+	  2                   3.0                5088
+	  3 (smallest)        5.1                4912
+
+endmenu
diff --git a/package/busybox/config/loginutils/Config.in b/package/busybox/config/loginutils/Config.in
new file mode 100644
index 0000000000..33a764e35c
--- /dev/null
+++ b/package/busybox/config/loginutils/Config.in
@@ -0,0 +1,163 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Login/Password Management Utilities"
+
+config BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS
+	bool "Support for shadow passwords"
+	default n
+	help
+	  Build support for shadow password in /etc/shadow.  This file is only
+	  readable by root and thus the encrypted passwords are no longer
+	  publicly readable.
+
+config BUSYBOX_CONFIG_USE_BB_SHADOW
+	bool #"  Use busybox shadow password functions"
+	default n
+	depends on BUSYBOX_CONFIG_USE_BB_PWD_GRP && BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS
+	help
+	    If you leave this disabled, busybox will use the system's shadow
+	    password handling functions.  And if you are using the GNU C library
+	    (glibc), you will then need to install the /etc/nsswitch.conf
+	    configuration file and the required /lib/libnss_* libraries in
+	    order for the shadow password functions to work.  This generally
+	    makes your embedded system quite a bit larger.
+
+	    Enabling this option will cause busybox to directly access the
+	    system's /etc/shadow file when handling shadow passwords.  This
+	    makes your system smaller and I will get fewer emails asking about
+	    how glibc NSS works).  When this option is enabled, you will not be
+	    able to use PAM to access shadow passwords from remote LDAP
+	    password servers and whatnot.
+
+config BUSYBOX_CONFIG_USE_BB_PWD_GRP
+	bool "Use internal password and group functions rather than system functions"
+	default n
+	help
+	    If you leave this disabled, busybox will use the system's password
+	    and group functions.  And if you are using the GNU C library
+	    (glibc), you will then need to install the /etc/nsswitch.conf
+	    configuration file and the required /lib/libnss_* libraries in
+	    order for the password and group functions to work.  This generally
+	    makes your embedded system quite a bit larger.
+
+	    Enabling this option will cause busybox to directly access the
+	    system's /etc/password, /etc/group files (and your system will be
+	    smaller, and I will get fewer emails asking about how glibc NSS
+	    works).  When this option is enabled, you will not be able to use
+	    PAM to access remote LDAP password servers and whatnot.  And if you
+	    want hostname resolution to work with glibc, you still need the
+	    /lib/libnss_* libraries.
+
+	    If you enable this option, it will add about 1.5k to busybox.
+
+config BUSYBOX_CONFIG_ADDGROUP
+	bool "addgroup"
+	default n
+	help
+	  Utility for creating a new group account.
+
+config BUSYBOX_CONFIG_DELGROUP
+	bool "delgroup"
+	default n
+	help
+	  Utility for deleting a group account.
+
+config BUSYBOX_CONFIG_ADDUSER
+	bool "adduser"
+	default n
+	help
+	  Utility for creating a new user account.
+
+config BUSYBOX_CONFIG_DELUSER
+	bool "deluser"
+	default n
+	help
+	  Utility for deleting a user account.
+
+config BUSYBOX_CONFIG_GETTY
+	bool "getty"
+	default n
+	help
+	  getty lets you log in on a tty, it is normally invoked by init.
+
+config BUSYBOX_CONFIG_FEATURE_UTMP
+	bool "Support utmp file"
+	depends on BUSYBOX_CONFIG_GETTY || BUSYBOX_CONFIG_LOGIN || BUSYBOX_CONFIG_SU || BUSYBOX_CONFIG_WHO
+	default n
+	help
+	  The file /var/run/utmp is used to track who is currently logged in.
+
+config BUSYBOX_CONFIG_FEATURE_WTMP
+	bool "Support wtmp file"
+	depends on BUSYBOX_CONFIG_GETTY || BUSYBOX_CONFIG_LOGIN || BUSYBOX_CONFIG_SU || BUSYBOX_CONFIG_LAST
+	default n
+	select BUSYBOX_CONFIG_FEATURE_UTMP
+	help
+	  The file /var/run/wtmp is used to track when user's have logged into
+	  and logged out of the system.
+
+config BUSYBOX_CONFIG_LOGIN
+	bool "login"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  login is used when signing onto a system.
+
+	  Note that Busybox binary must be setuid root for this applet to
+	  work properly.
+
+config BUSYBOX_CONFIG_FEATURE_SECURETTY
+	bool "Support for /etc/securetty"
+	default n
+	depends on BUSYBOX_CONFIG_LOGIN
+	help
+	  The file  /etc/securetty  is used by (some versions of) login(1).
+	  The file contains the device names of tty lines (one per line,
+	  without leading /dev/) on which root is allowed to login.
+
+config BUSYBOX_CONFIG_PASSWD
+	bool "passwd"
+	default y
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  passwd changes passwords for user and group accounts.  A normal user
+	  may only change the password for his/her own account, the super user
+	  may change the password for any account.  The administrator of a group
+	  may change the password for the group.
+
+	  Note that Busybox binary must be setuid root for this applet to
+	  work properly.
+
+config BUSYBOX_CONFIG_SU
+	bool "su"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  su is used to become another user during a login session.
+	  Invoked without a username, su defaults to becoming the super user.
+
+	  Note that Busybox binary must be setuid root for this applet to
+	  work properly.
+
+config BUSYBOX_CONFIG_SULOGIN
+	bool "sulogin"
+	default n
+	help
+	  sulogin is invoked when the system goes into single user
+	  mode (this is done through an entry in inittab).
+
+config BUSYBOX_CONFIG_VLOCK
+	bool "vlock"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  Build the "vlock" applet which allows you to lock (virtual) terminals.
+
+	  Note that Busybox binary must be setuid root for this applet to
+	  work properly.
+
+endmenu
+
diff --git a/package/busybox/config/miscutils/Config.in b/package/busybox/config/miscutils/Config.in
new file mode 100644
index 0000000000..407503dc40
--- /dev/null
+++ b/package/busybox/config/miscutils/Config.in
@@ -0,0 +1,346 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Miscellaneous Utilities"
+
+config BUSYBOX_CONFIG_ADJTIMEX
+	bool "adjtimex"
+	default n
+	help
+	  Adjtimex reads and optionally sets adjustment parameters for
+	  the Linux clock adjustment algorithm.
+
+config BUSYBOX_CONFIG_BBCONFIG
+	bool "bbconfig"
+	default n
+	help
+	  The bbconfig applet will print the config file with which
+	  busybox was built.
+
+config BUSYBOX_CONFIG_CROND
+	bool "crond"
+	default y
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  Crond is a background daemon that parses individual crontab
+	  files and executes commands on behalf of the users in question.
+	  This is a port of dcron from slackware.  It uses files of the
+	  format /var/spool/cron/crontabs/<username> files, for example:
+	      $ cat /var/spool/cron/crontabs/root
+	      # Run daily cron jobs at 4:40 every day:
+	      40 4 * * * /etc/cron/daily > /dev/null 2>&1
+	  Note that Busybox binary must be setuid root for this applet to
+	  work properly.
+
+config BUSYBOX_CONFIG_DEBUG_CROND_OPTION
+	bool "Support debug option -d"
+	depends on BUSYBOX_CONFIG_CROND
+	default n
+	help
+	  Support option -d to enter debug mode.
+
+config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
+	bool "Using /usr/sbin/sendmail?"
+	default n
+	depends on BUSYBOX_CONFIG_CROND
+	help
+	  Support calling /usr/sbin/sendmail for send cmd outputs.
+
+config BUSYBOX_CONFIG_CRONTAB
+	bool "crontab"
+	default y
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  Crontab manipulates the crontab for a particular user.  Only
+	  the superuser may specify a different user and/or crontab directory.
+
+config BUSYBOX_CONFIG_DC
+	bool "dc"
+	default n
+	help
+	  Dc is a reverse-polish desk calculator which supports unlimited
+	  precision arithmetic.
+
+config BUSYBOX_CONFIG_DEVFSD
+	bool "devfsd (obsolete)"
+	default n
+	help
+	  This is deprecated, and will be going away in a future release.
+
+	  Provides compatibility with old device names on a devfs systems.
+	  You should set it to true if you have devfs enabled.
+	  The following keywords in devsfd.conf are supported:
+	  "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
+	  "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
+	  "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
+
+	   But only if they are written UPPERCASE!!!!!!!!
+
+config BUSYBOX_CONFIG_DEVFSD_MODLOAD
+	bool "Adds support for MODLOAD keyword in devsfd.conf"
+	default n
+	depends on BUSYBOX_CONFIG_DEVFSD
+	help
+	  This actually doesn't work with busybox modutils but needs
+	  the external modutils.
+
+config BUSYBOX_CONFIG_DEVFSD_FG_NP
+	bool "Enables the -fg and -np options"
+	default n
+	depends on BUSYBOX_CONFIG_DEVFSD
+	help
+		-fg	Run the daemon in the foreground.
+		-np	Exit  after  parsing  the configuration file. Do not poll for events.
+
+config BUSYBOX_CONFIG_DEVFSD_VERBOSE
+	bool "Increases logging (and size)"
+	default n
+	depends on BUSYBOX_CONFIG_DEVFSD
+	help
+	  Increases logging to stderr or syslog.
+
+config BUSYBOX_CONFIG_FEATURE_DEVFS
+	bool "  Use devfs names for all devices (obsolete)"
+	default y
+	help
+	  This tells busybox to look for names like /dev/loop/0 instead of
+	  /dev/loop0.  If your /dev directory has normal names instead of
+	  devfs names, you don't want this.
+
+	  This is obsolete and will be going away someday.  Consider it
+	  deprecated.
+
+config BUSYBOX_CONFIG_EJECT
+	bool "eject"
+	default n
+	help
+	  Used to eject cdroms.  (defaults to /dev/cdrom)
+
+config BUSYBOX_CONFIG_LAST
+	bool "last"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_WTMP
+	help
+	  'last' displays a list of the last users that logged into the system.
+
+config BUSYBOX_CONFIG_LESS
+	bool "less"
+	default y
+	help
+	  'less' is a pager, meaning that it displays text files. It possesses
+	  a wide array of features, and is an improvement over 'more'.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
+	bool "Enable bracket searching"
+	default n
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  This option adds the capability to search for matching left and right
+	  brackets, facilitating programming.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
+	bool "Enable extra flags"
+	default n
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  The extra flags provided do the following:
+
+	  The -M flag enables a more sophisticated status line.
+	  The -m flag enables a simpler status line with a percentage.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS
+	bool "Enable flag changes"
+	default n
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  This enables the ability to change command-line flags within
+	  less itself.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
+	bool "Enable marks"
+	default n
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  Marks enable positions in a file to be stored for easy reference.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
+	bool "Enable regular expressions"
+	default n
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  Enable regular expressions, allowing complex file searches.
+
+config BUSYBOX_CONFIG_HDPARM
+	bool "hdparm"
+	default n
+	help
+	  Get/Set hard drive parameters.  Primarily intended for ATA
+	  drives.  Adds about 13k (or around 30k if you enable the
+	  BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY option)....
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
+	bool "Support obtaining detailed information directly from drives"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the -I and -i options to obtain detailed information
+	  directly from drives about their capabilities and supported ATA
+	  feature set. If no device name is specified, hdparm will read
+	  identify data from stdin. Enabling this option will add about 16k...
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
+	bool "Register an IDE interface (DANGEROUS)"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -R' option to register an IDE interface.
+	  This is dangerous stuff, so you should probably say N.
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
+	bool "Un-register an IDE interface (DANGEROUS)"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -U' option to un-register an IDE interface.
+	  This is dangerous stuff, so you should probably say N.
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
+	bool "perform device reset (DANGEROUS)"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -w' option to perform a device reset.
+	  This is dangerous stuff, so you should probably say N.
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
+	bool "tristate device for hotswap (DANGEROUS)"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -x' option to tristate device for hotswap,
+	  and the '-b' option to get/set bus state.  This is dangerous
+	  stuff, so you should probably say N.
+
+config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
+	bool "get/set using_dma flag (DANGEROUS)"
+	default n
+	depends on BUSYBOX_CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -d' option to get/set using_dma flag.
+	  This is dangerous stuff, so you should probably say N.
+
+config BUSYBOX_CONFIG_LOCK
+	bool "lock"
+	default y
+	help
+	  Small utility for using locks in scripts
+
+config BUSYBOX_CONFIG_MAKEDEVS
+	bool "makedevs"
+	default n
+	help
+	  'makedevs' is a utility used to create a batch of devices with
+	  one command.
+	  .
+	  There are two choices for command line behaviour, the interface
+	  as used by LEAF/Linux Router Project, or a device table file.
+	  .
+	  'leaf' is traditionally what busybox follows, it allows multiple
+	  devices of a particluar type to be created per command.
+	  e.g. /dev/hda[0-9]
+          Device properties are passed as command line arguments.
+	  .
+	  'table' reads device properties from a file or stdin, allowing
+	  a batch of unrelated devices to be made with one command.
+          User/group names are allowed as an alternative to uid/gid.
+
+choice
+	prompt "Choose makedevs behaviour"
+	depends BUSYBOX_CONFIG_MAKEDEVS
+	default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
+
+config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF
+        bool "leaf"
+
+config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
+	bool "table"
+
+endchoice
+
+config BUSYBOX_CONFIG_MOUNTPOINT
+	bool "mountpoint"
+	default n
+	help
+	  mountpoint checks if the directory is a mountpoint.
+
+config BUSYBOX_CONFIG_MT
+	bool "mt"
+	default n
+	help
+	  mt is used to control tape devices.  You can use the mt utility
+	  to advance or rewind a tape past a specified number of archive
+	  files on the tape.
+
+config BUSYBOX_CONFIG_RUNLEVEL
+        bool "runlevel"
+	default n
+	help
+ 	  find the current and previous system runlevel.
+
+	  This applet uses utmp but does not rely on busybox supporing
+	  utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+
+config BUSYBOX_CONFIG_RX
+        bool "rx"
+	default n
+	help
+ 	  Receive files using the Xmodem protocol.
+
+config BUSYBOX_CONFIG_STRINGS
+	bool "strings"
+	default y
+	help
+	  strings prints the printable character sequences for each file
+	  specified.
+
+config BUSYBOX_CONFIG_SETSID
+	bool "setsid"
+	default n
+	help
+	  setsid runs a program in a new session
+
+config BUSYBOX_CONFIG_TASKSET
+	bool "taskset"
+	default n
+	help
+	  Retrieve or set a processes's CPU affinity
+
+config BUSYBOX_CONFIG_TASKSET
+	bool "taskset"
+	default n
+	help
+	  Retrieve or set a processes's CPU affinity (on linux)
+
+config BUSYBOX_CONFIG_TIME
+	bool "time"
+	default y
+	help
+	  The time command runs the specified program with the given arguments.
+	  When the command finishes, time writes a message to standard output
+	  giving timing statistics about this program run.
+
+config BUSYBOX_CONFIG_WATCHDOG
+	bool "watchdog"
+	default y
+	help
+	  The watchdog utility is used with hardware or software watchdog
+	  device drivers.  It opens the specified watchdog device special file
+	  and periodically writes a magic character to the device.  If the
+	  watchdog applet ever fails to write the magic character within a
+	  certain amount of time, the watchdog device assumes the system has
+	  hung, and will cause the hardware to reboot.
+
+endmenu
+
diff --git a/package/busybox/config/modutils/Config.in b/package/busybox/config/modutils/Config.in
new file mode 100644
index 0000000000..4441632e85
--- /dev/null
+++ b/package/busybox/config/modutils/Config.in
@@ -0,0 +1,147 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Linux Module Utilities"
+
+config BUSYBOX_CONFIG_INSMOD
+	bool "insmod"
+	default y
+	help
+	  insmod is used to load specified modules in the running kernel.
+
+config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING
+	bool "Module version checking"
+	default n
+	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
+	help
+	  Support checking of versions for modules.  This is used to
+	  ensure that the kernel and module are made for each other.
+
+config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
+	bool "Add module symbols to kernel symbol table"
+	default n
+	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
+	help
+	  By adding module symbols to the kernel symbol table, Oops messages
+	  occuring within kernel modules can be properly debugged.  By enabling
+	  this feature, module symbols will always be added to the kernel symbol
+	  table for properly debugging support.  If you are not interested in
+	  Oops messages from kernel modules, say N.
+
+config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM
+	bool "In kernel memory optimization (uClinux only)"
+	default n
+	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
+	help
+	  This is a special uClinux only memory optimization that lets insmod
+	  load the specified kernel module directly into kernel space, reducing
+	  memory usage by preventing the need for two copies of the module
+	  being loaded into memory.
+
+config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP
+	bool "Enable load map (-m) option"
+	default n
+	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
+	help
+	  Enabling this, one would be able to get a load map
+	  output on stdout. This makes kernel module debugging
+	  easier.
+	  If you don't plan to debug kernel modules, you
+	  don't need this option.
+
+config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL
+	bool "Symbols in load map"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP
+	help
+	  Without this option, -m will only output section
+	  load map.  With this option, -m will also output
+	  symbols load map.
+
+config BUSYBOX_CONFIG_RMMOD
+	bool "rmmod"
+	default y
+	help
+	  rmmod is used to unload specified modules from the kernel.
+
+config BUSYBOX_CONFIG_LSMOD
+	bool "lsmod"
+	default y
+	help
+	  lsmod is used to display a list of loaded modules.
+
+config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
+	bool "lsmod pretty output for 2.6.x Linux kernels "
+	default n
+	depends on BUSYBOX_CONFIG_LSMOD
+	help
+	  This option makes output format of lsmod adjusted to
+	  the format of module-init-tools for Linux kernel 2.6.
+
+config BUSYBOX_CONFIG_MODPROBE
+	bool "modprobe"
+	default n
+	help
+	  Handle the loading of modules, and their dependencies on a high
+	  level.
+
+	  Note that in the state, modprobe does not understand multiple
+	  module options from the configuration file. See option below.
+
+config BUSYBOX_CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS
+	bool "Multiple options parsing"
+	default n
+	depends on BUSYBOX_CONFIG_MODPROBE
+	help
+	  Allow modprobe to understand more than one option to pass to
+	  modules.
+
+	  This is a WIP, while waiting for a common argument parsing
+	  common amongst all BB applets (shell, modprobe, etc...) and
+	  adds around 600 bytes on x86, 700 bytes on ARM. The code is
+	  biggish and uggly, but just works.
+
+	  Saying Y here is not a bad idea if you're not that short
+	  on storage capacity.
+
+comment "Options common to multiple modutils"
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_LSMOD
+
+config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
+	# Simulate indentation
+	bool "Support tainted module checking with new kernels"
+	default y
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_LSMOD
+	help
+	  Support checking for tainted modules.  These are usually binary
+	  only modules that will make the linux-kernel list ignore your
+	  support request.
+	  This option is required to support GPLONLY modules.
+
+config BUSYBOX_CONFIG_FEATURE_2_4_MODULES
+	# Simulate indentation
+	bool "Support version 2.2.x to 2.4.x Linux kernels"
+	default y
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD
+	help
+	  Support module loading for 2.2.x and 2.4.x Linux kernels.
+
+config BUSYBOX_CONFIG_FEATURE_2_6_MODULES
+	# Simulate indentation
+	bool "Support version 2.6.x Linux kernels"
+	default y
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE
+	help
+	  Support module loading for newer 2.6.x Linux kernels.
+
+
+config BUSYBOX_CONFIG_FEATURE_QUERY_MODULE_INTERFACE
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && !CONFIG_FEATURE_2_6_MODULES
+
+
+endmenu
+
diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
new file mode 100644
index 0000000000..3e0cbc95d4
--- /dev/null
+++ b/package/busybox/config/networking/Config.in
@@ -0,0 +1,710 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Networking Utilities"
+
+config BUSYBOX_CONFIG_FEATURE_IPV6
+	bool "Enable IPv6 support"
+	default y
+	help
+	  Enable IPv6 support in busybox.
+	  This adds IPv6 support in the networking applets.
+
+config BUSYBOX_CONFIG_ARPING
+	bool "arping"
+	default y
+	help
+	  Ping hosts by ARP packets
+
+config BUSYBOX_CONFIG_DNSD
+	bool "dnsd"
+	default n
+	help
+	  Small and static DNS server daemon. 
+
+config BUSYBOX_CONFIG_ETHER_WAKE
+	bool "ether-wake"
+	default n
+	help
+	  Send a magic packet to wake up sleeping machines.
+
+config BUSYBOX_CONFIG_FAKEIDENTD
+	bool "fakeidentd"
+	default n
+	help
+	  fakeidentd listens on the ident port and returns a predefined
+	  fake value on any query.
+
+config BUSYBOX_CONFIG_FTPGET
+	bool "ftpget"
+	default n
+	help
+	  Retrieve a remote file via FTP.
+
+config BUSYBOX_CONFIG_FTPPUT
+	bool "ftpput"
+	default n
+	help
+	  Store a remote file via FTP.
+
+config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
+	bool "Enable long options in ftpget/ftpput"
+	default n
+	depends on BUSYBOX_CONFIG_GETOPT_LONG && (CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
+	help
+	  Support long options for the ftpget/ftpput applet.
+
+config BUSYBOX_CONFIG_HOSTNAME
+	bool "hostname"
+	default n
+	help
+	  Show or set the system's host name
+
+config BUSYBOX_CONFIG_HTTPD
+	bool "httpd"
+	default y
+	help
+	  Serve web pages via an HTTP server.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+	bool "Support using httpd as a daemon (not from inetd)"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option enables uid and port options for the httpd applet,
+	  and eliminates the need to be called from the inetd server daemon.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+	bool "Support reloading the global config file using hup signal"
+	default n
+	depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+	help
+	  This option enables processing of SIGHUP to reload cached
+	  configuration settings.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
+	bool "Enable support -u <user> option"
+	default n
+	depends on BUSYBOX_CONFIG_HTTPD && BUSYBOX_CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+	help
+	  This option allows the server to run as a specific user
+	  rather than defaulting to the user that starts the server.
+	  Use of this option requires special privileges to change to a
+	  different user.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+	bool "Enable Basic http Authentication"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  Utilizes password settings from /etc/httpd.conf for basic
+	  authentication on a per url basis.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
+	bool "Support MD5 crypted passwords for http Authentication"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+	help
+	  Enables basic per URL authentication from /etc/httpd.conf
+	  using md5 passwords.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+	bool "Support loading additional MIME types at run-time"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option enables support for additional MIME types at
+	  run-time to be specified in the configuration file.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	bool "Support Common Gateway Interface (CGI)"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows scripts and executables to be invoked
+	  when specific URLs are requested.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+	bool "Enable support for running scripts through an interpreter"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	help
+	  This option enables support for running scripts through an 
+	  interpreter. Turn this on if you want PHP scripts to work 
+	  properly. You need to supply an addition line in your httpd 
+	  config file:
+	  *.php:/path/to/your/php
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+	bool "Support the REMOTE_PORT environment variable for CGI"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+	help
+	  Use of this option can assist scripts in generating
+	  references that contain a unique port number.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
+	bool "Enable the -e option for shell script CGI simplification."
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows html encoding arbitrary
+	  strings for display of the browser.  Output goes to stdout.
+	  For example, httpd -e "<Hello World>" as
+	  "&#60Hello&#32World&#62".
+
+config BUSYBOX_CONFIG_IFCONFIG
+	bool "ifconfig"
+	default y
+	help
+	  Ifconfig is used to configure the kernel-resident network interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
+	bool "Enable status reporting output (+7k)"
+	default y
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  If ifconfig is called with no arguments it will display the status
+	  of the currently active interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
+	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
+	default n
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Allow "keepalive" and "outfill" support for SLIP.  If you're not
+	  planning on using serial lines, leave this unchecked.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
+	default n
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Allow the start address for shared memory, start address for I/O,
+	  and/or the interrupt line used by the specified device.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
+	bool "Enable option \"hw\" (ether only)"
+	default y
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Set the hardware address of this interface, if the device driver
+	  supports  this  operation.  Currently, we only support the 'ether'
+	  class.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
+	bool "Set the broadcast automatically"
+	default y
+	depends on BUSYBOX_CONFIG_IFCONFIG
+	help
+	  Setting this will make ifconfig attempt to find the broadcast
+	  automatically if the value '+' is used.
+
+config BUSYBOX_CONFIG_IFUPDOWN
+	bool "ifupdown"
+	default n
+	select BUSYBOX_CONFIG_RUN_PARTS
+	help
+	  Activate or deactivate the specified interfaces.  This applet makes
+	  use of either "ifconfig" and "route" or the "ip" command to actually
+	  configure network interfaces.  Therefore, you will probably also want
+	  to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
+	  BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options.  Of
+	  course you could use non-busybox versions of these programs, so
+	  against my better judgement (since this will surely result in plenty
+	  of support questions on the mailing list), I do not force you to
+	  enable these additional options.  It is up to you to supply either
+	  "ifconfig" and "route" or the "ip" command, either via busybox or via
+	  standalone utilities.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+	bool "Use ip applet"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+	  than the default of using the older 'ifconfig' and 'route' utilities.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+	bool "Use busybox ip applet"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+	select BUSYBOX_CONFIG_IP
+	select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+	select BUSYBOX_CONFIG_FEATURE_IP_LINK
+	select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+	help
+	  Use the busybox iproute "ip" applet to implement "ifupdown".
+
+	  If leave this disabled, you must install the full-blown iproute2
+	  utility or the  "ifup" and "ifdown" applets will not work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+	bool "Use busybox ifconfig and route applets"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+	select BUSYBOX_CONFIG_IFCONFIG
+	select BUSYBOX_CONFIG_ROUTE
+	help
+	  Use the busybox iproute "ifconfig" and "route" applets to
+	  implement the "ifup" and "ifdown" utilities.
+
+	  If leave this disabled, you must install the full-blown ifconfig
+	  and route utilities, or the  "ifup" and "ifdown" applets will not
+	  work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
+	bool "Enable support for IPv4"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  If you want busybox to talk IPv4, leave this on.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
+	bool "Enable support for IPv6"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  If you need support for IPv6, turn this option on.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
+	bool "Enable support for IPX"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  If this option is selected you can use busybox to work with IPX
+	  networks.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
+	bool "Enable mapping support"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  This enables support for the "mapping" stanza, unless you have
+	  a weird network setup you don't need it.
+
+config BUSYBOX_CONFIG_INETD
+	bool "inetd"
+	default n
+	help
+	  Internet superserver daemon
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+	bool "Support echo service"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Echo received data internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+	bool "Support discard service"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Internet /dev/null internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+	bool "Support time service"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Return 32 bit time since 1900 internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+	bool "Support daytime service"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Return human-readable time internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+	bool "Support chargen service"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Familiar character generator internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_RPC
+	bool "Support RPC services"
+	default n
+	depends on BUSYBOX_CONFIG_INETD
+	help
+	  Suuport Sun-RPC based services
+
+
+config BUSYBOX_CONFIG_IP
+	bool "ip"
+	default n
+	help
+	  The "ip" applet is a TCP/IP interface configuration and routing
+	  utility.  You generally don't need "ip" to use busybox with
+	  TCP/IP.
+
+config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+	bool "ip address"
+	default n
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Address manipulation support for the "ip" applet.
+
+config BUSYBOX_CONFIG_FEATURE_IP_LINK
+	bool "ip link"
+	default n
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Configure network devices with "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+	bool "ip route"
+	default n
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Add support for routing table management to "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+	bool "ip tunnel"
+	default n
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Add support for tunneling commands to "ip".
+
+config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
+	bool "Support short forms of ip commands."
+	default n
+	depends on BUSYBOX_CONFIG_IP
+	help
+	  Also support short-form of ip <OBJECT> commands:
+	  ip addr   -> ipaddr
+	  ip link   -> iplink
+	  ip route  -> iproute
+	  ip tunnel -> iptunnel
+
+	  Say N unless you desparately need the short form of the ip
+	  object commands.
+
+config BUSYBOX_CONFIG_IPADDR
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+
+config BUSYBOX_CONFIG_IPLINK
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
+
+config BUSYBOX_CONFIG_IPROUTE
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+
+config BUSYBOX_CONFIG_IPTUNNEL
+	bool
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+
+config BUSYBOX_CONFIG_IPCALC
+	bool "ipcalc"
+	default n
+	help
+	  ipcalc takes an IP address and netmask and calculates the
+	  resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+	bool "Fancy IPCALC, more options, adds 1 kbyte"
+	default n
+	depends on BUSYBOX_CONFIG_IPCALC
+	help
+	  Adds the options hostname, prefix and silent to the output of "ipcalc".
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the ipcalc applet.
+
+config BUSYBOX_CONFIG_NAMEIF
+	bool "nameif"
+	default n
+	help
+	  nameif is used to rename network interface by its MAC address.
+	  Renamed interfaces MUST be in the down state.
+	  It is possible to use a file (default: /etc/mactab)
+	  with list of new interface names and MACs.
+	  Maximum interface name length: IF_NAMESIZE = 16
+	  File fields are separated by space or tab.
+	  File format:
+	  # Comment
+	  new_interface_name    XX:XX:XX:XX:XX:XX
+
+config BUSYBOX_CONFIG_NC
+	bool "nc"
+	default y
+	help
+	  A simple Unix utility which reads and writes data across network
+	  connections.
+	  
+config BUSYBOX_CONFIG_NETMSG
+	bool "netmsg"
+	default y
+	help
+	  simple program for sending udp broadcast messages
+
+config BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE
+	bool "gaping security hole"
+	default n
+	depends on BUSYBOX_CONFIG_NC
+	help
+	  Add support for executing a program after making or receiving a
+	  successful connection (-e option).
+
+config BUSYBOX_CONFIG_NETSTAT
+	bool "netstat"
+	default y
+	help
+	  netstat prints information about the Linux networking subsystem.
+
+config BUSYBOX_CONFIG_NSLOOKUP
+	bool "nslookup"
+	default y
+	help
+	  nslookup is a tool to query Internet name servers.
+
+config BUSYBOX_CONFIG_PING
+	bool "ping"
+	default y
+	help
+	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+	  elicit an ICMP ECHO_RESPONSE from a host or gateway.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+	bool "Enable fancy ping output"
+	default y
+	depends on BUSYBOX_CONFIG_PING
+	help
+	  Make the output from the ping applet include statistics, and at the
+	  same time provide full support for ICMP packets.
+
+config BUSYBOX_CONFIG_PING6
+	bool "ping6"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  This will give you a ping that can talk IPv6.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
+	bool "Enable fancy ping6 output"
+	default y
+	depends on BUSYBOX_CONFIG_PING6
+	help
+	  Make the output from the ping6 applet include statistics, and at the
+	  same time provide full support for ICMP packets.
+
+config BUSYBOX_CONFIG_ROUTE
+	bool "route"
+	default y
+	help
+	  Route displays or manipulates the kernel's IP routing tables.
+
+config BUSYBOX_CONFIG_TELNET
+	bool "telnet"
+	default y
+	help
+	  Telnet is an interface to the TELNET protocol, but is also commonly
+	  used to test other simple protocols.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
+	bool "Pass TERM type to remote host"
+	default y
+	depends on BUSYBOX_CONFIG_TELNET
+	help
+	  Setting this option will forward the TERM environment variable to the
+	  remote host you are connecting to.  This is useful to make sure that
+	  things like ANSI colors and other control sequences behave.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
+	bool "Pass USER type to remote host"
+	default n
+	depends on BUSYBOX_CONFIG_TELNET
+	help
+	  Setting this option will forward the USER environment variable to the
+	  remote host you are connecting to. This is useful when you need to
+	  log into a machine without telling the username (autologin). This
+	  option enables `-a' and `-l USER' arguments.
+
+config BUSYBOX_CONFIG_TELNETD
+	bool "telnetd"
+	default y
+	help
+	  A daemon for the TELNET protocol, allowing you to log onto the host
+	  running the daemon.  Please keep in mind that the TELNET protocol
+	  sends passwords in plain text.  If you can't afford the space for an
+	  SSH daemon and you trust your network, you may say 'y' here.  As a
+	  more secure alternative, you should seriously consider installing the
+	  very small Dropbear SSH daemon instead:
+		http://matt.ucc.asn.au/dropbear/dropbear.html
+
+	  Note that for busybox telnetd to work you need several things:
+	  First of all, your kernel needs:
+		  BUSYBOX_CONFIG_UNIX98_PTYS=y
+		  BUSYBOX_CONFIG_DEVPTS_FS=y
+
+	  Next, you need a /dev/pts directory on your root filesystem:
+
+		  $ ls -ld /dev/pts
+		  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
+
+	  Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+		  $ ls -la /dev/ptmx
+		  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+	  Any /dev/ttyp[0-9]* files you may have can be removed.
+	  Next, you need to mount the devpts filesystem on /dev/pts using:
+
+		  mount -t devpts devpts /dev/pts
+
+	  You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
+	  BUSYBOX_CONFIG_FEATURE_SUID enabled.  And finally, you should make
+	  certain that Busybox has been installed setuid root:
+
+		chown root.root /bin/busybox
+		chmod 4755 /bin/busybox
+
+	  with all that done, telnetd _should_ work....
+
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
+	bool "Support call from inetd only"
+	default n
+	depends on BUSYBOX_CONFIG_TELNETD
+	help
+	  Selecting this will make telnetd only callable from inetd,
+	  removing the standalone support.
+
+config BUSYBOX_CONFIG_TFTP
+	bool "tftp"
+	default n
+	help
+	  This enables the Trivial File Transfer Protocol client program.  TFTP
+	  is usually used for simple, small transfers such as a root image
+	  for a network-enabled bootloader.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_GET
+	bool "Enable \"get\" command"
+	default n
+	depends on BUSYBOX_CONFIG_TFTP
+	help
+	  Add support for the GET command within the TFTP client.  This allows
+	  a client to retrieve a file from a TFTP server.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
+	bool "Enable \"put\" command"
+	default n
+	depends on BUSYBOX_CONFIG_TFTP
+	help
+	  Add support for the PUT command within the TFTP client.  This allows
+	  a client to transfer a file to a TFTP server.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
+	bool "Enable \"blocksize\" command"
+	default n
+	depends on BUSYBOX_CONFIG_TFTP
+	help
+	  Allow the client to specify the desired block size for transfers.
+
+config BUSYBOX_CONFIG_DEBUG_TFTP
+	bool "Enable debug"
+	default n
+	depends on BUSYBOX_CONFIG_TFTP
+	help
+	  Enable debug settings for tftp.  This is useful if you're running
+	  into problems with tftp as the protocol doesn't help you much when
+	  you run into problems.
+
+config BUSYBOX_CONFIG_TRACEROUTE
+	bool "traceroute"
+	default y
+	help
+	  Utility to trace the route of IP packets
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
+	bool "Enable verbose output"
+	default y
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add some verbosity to traceroute.  This includes amongst other things
+	  hostnames and ICMP response types.
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
+	bool "Enable loose source route"
+	default n
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add option to specify a loose source route gateway
+	  (8 maximum).
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
+	bool "Use ICMP instead of UDP"
+	default n
+	depends on BUSYBOX_CONFIG_TRACEROUTE
+	help
+	  Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source package/busybox/config/networking/udhcp/Config.in
+
+config BUSYBOX_CONFIG_VCONFIG
+	bool "vconfig"
+	default y
+	help
+	  Creates, removes, and configures VLAN interfaces
+
+config BUSYBOX_CONFIG_WGET
+	bool "wget"
+	default y
+	help
+	  wget is a utility for non-interactive download of files from HTTP,
+	  HTTPS, and FTP servers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
+	bool "Enable a nifty process meter (+2k)"
+	default y
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
+	bool "Enable HTTP authentication"
+	default y
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Support authenticated HTTP transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
+	bool "Enable IPv6 literal addresses"
+	default y
+	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  Support IPv6 address literal notation in URLs.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+	bool "Enable long options"
+	default y
+	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the wget applet.
+
+config BUSYBOX_CONFIG_ZCIP
+	bool "zcip"
+	default n
+	help
+	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+	  It's a daemon that allocates and defends a dynamically assigned
+	  address on the 169.254/16 network, requiring no system administrator.
+
+	  See http://www.zeroconf.org for further details, and "zcip.script"
+	  in the busybox examples.
+
+endmenu
diff --git a/package/busybox/config/networking/udhcp/Config.in b/package/busybox/config/networking/udhcp/Config.in
new file mode 100644
index 0000000000..741afa3279
--- /dev/null
+++ b/package/busybox/config/networking/udhcp/Config.in
@@ -0,0 +1,62 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "udhcp Server/Client"
+
+config BUSYBOX_CONFIG_APP_UDHCPD
+	bool "udhcp Server (udhcpd)"
+	default n
+	help
+	  uDHCPd is a DHCP server geared primarily toward embedded systems,
+	  while striving to be fully functional and RFC compliant.
+
+	  See http://udhcp.busybox.net for further details.
+
+config BUSYBOX_CONFIG_APP_UDHCPC
+	bool "udhcp Client (udhcpc)"
+	default y
+	help
+	  uDHCPc is a DHCP client geared primarily toward embedded systems,
+	  while striving to be fully functional and RFC compliant.
+
+	  The udhcp client negotiates a lease with the DHCP server and
+	  notifies a set of scripts when a lease is obtained or lost.
+
+	  See http://udhcp.busybox.net for further details.
+
+config BUSYBOX_CONFIG_APP_DUMPLEASES
+	bool "Lease display utility (dumpleases)"
+	default n
+	depends on BUSYBOX_CONFIG_APP_UDHCPD
+	help
+	  dumpleases displays the leases written out by the udhcpd server.
+	  Lease times are stored in the file by time remaining in lease, or
+	  by the absolute time that it expires in seconds from epoch.
+
+	  See http://udhcp.busybox.net for further details.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_SYSLOG
+	bool "  Log udhcp messages to syslog (instead of stdout)"
+	default n
+	depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+	help
+	  If selected, udhcpd will log all its messages to syslog, otherwise,
+	  it will attempt to log them to stdout.
+
+	  See http://udhcp.busybox.net for further details.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG
+	bool "  Compile udhcp with noisy debugging messages"
+	default n
+	depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+	help
+	  If selected, udhcpd will output extra debugging output.  If using
+	  this option, compile uDHCP with "-g", and do not fork the daemon to
+	  the background.
+
+	  See http://udhcp.busybox.net for further details.
+
+endmenu
+
diff --git a/package/busybox/config/procps/Config.in b/package/busybox/config/procps/Config.in
new file mode 100644
index 0000000000..34d1ace087
--- /dev/null
+++ b/package/busybox/config/procps/Config.in
@@ -0,0 +1,121 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Process Utilities"
+
+config BUSYBOX_CONFIG_FREE
+	bool "free"
+	default y
+	help
+	  free displays the total amount of free and used physical and swap
+	  memory in the system, as well as the buffers used by the kernel.
+	  The shared memory column should be ignored; it is obsolete.
+
+config BUSYBOX_CONFIG_FUSER
+	bool "fuser"
+	default n
+	help
+	  fuser lists all PIDs (Process IDs) that currently have a given
+	  file open.  fuser can also list all PIDs that have a given network
+	  (TCP or UDP) port open.
+
+config BUSYBOX_CONFIG_KILL
+	bool "kill"
+	default y
+	help
+	  The command kill sends the specified signal to the specified
+	  process or process group.  If no signal is specified, the TERM
+	  signal is sent.
+
+config BUSYBOX_CONFIG_KILLALL
+	bool "killall"
+	default y
+	depends on BUSYBOX_CONFIG_KILL
+	help
+	  killall sends a signal to all processes running any of the
+	  specified commands.  If no signal name is specified, SIGTERM is
+	  sent.
+
+config BUSYBOX_CONFIG_KILLALL5
+	bool "killall5"
+	default y
+	depends on BUSYBOX_CONFIG_KILL
+	
+config BUSYBOX_CONFIG_PIDOF
+	bool "pidof"
+	default y
+	help
+	  Pidof finds the process id's (pids) of the named programs. It prints
+	  those id's on the standard output.
+
+config BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE
+	bool "Enable argument for single shot (-s)"
+	default n
+	depends on BUSYBOX_CONFIG_PIDOF
+	help
+	  Support argument '-s' for returning only the first pid found.
+
+config BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT
+	bool "Enable argument for omitting pids (-o)"
+	default n
+	depends on BUSYBOX_CONFIG_PIDOF
+	help
+	  Support argument '-o' for omitting the given pids in output.
+	  The special pid %PPID can be used to name the parent process
+	  of the pidof, in other words the calling shell or shell script.
+
+config BUSYBOX_CONFIG_PS
+	bool "ps"
+	default y
+	help
+	  ps gives a snapshot of the current processes.
+
+config BUSYBOX_CONFIG_FEATURE_PS_WIDE
+	bool "Enable argument for wide output (-w)"
+	default n
+	depends on BUSYBOX_CONFIG_PS
+	help
+	  Support argument 'w' for wide output.
+	  If given once, 132 chars are printed and given more than
+	  one, the length is unlimited.
+
+config BUSYBOX_CONFIG_RENICE
+	bool "renice"
+	default n
+	help
+	  Renice alters the scheduling priority of one or more running
+	  processes.
+
+config BUSYBOX_CONFIG_BB_SYSCTL
+	bool "sysctl"
+	default y
+	help
+	  Configure kernel parameters at runtime.
+
+config BUSYBOX_CONFIG_TOP
+	bool "top"
+	default y
+	help
+	  The top program provides a dynamic real-time view of a running
+	  system.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	bool "Support showing CPU usage percentage (add 2k bytes)"
+	default y
+	depends on BUSYBOX_CONFIG_TOP
+	help
+	  Make top display CPU usage.
+
+config BUSYBOX_CONFIG_UPTIME
+	bool "uptime"
+	default y
+	help
+	  uptime gives a one line display of the current time, how long
+	  the system has been running, how many users are currently logged
+	  on, and the system load averages for the past 1, 5, and 15 minutes.
+
+
+endmenu
+
diff --git a/package/busybox/config/shell/Config.in b/package/busybox/config/shell/Config.in
new file mode 100644
index 0000000000..373c7461a4
--- /dev/null
+++ b/package/busybox/config/shell/Config.in
@@ -0,0 +1,294 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Shells"
+
+choice
+	prompt "Choose your default shell"
+	default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
+	help
+	  Choose a shell. The ash shell is the most bash compatible
+	  and full featured one.
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
+	select BUSYBOX_CONFIG_ASH
+	bool "ash"
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH
+	select BUSYBOX_CONFIG_HUSH
+	bool "hush"
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_LASH
+	select BUSYBOX_CONFIG_LASH
+	bool "lash"
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH
+	select BUSYBOX_CONFIG_MSH
+	bool "msh"
+
+config BUSYBOX_CONFIG_FEATURE_SH_IS_NONE
+	bool "none"
+
+endchoice
+
+config BUSYBOX_CONFIG_ASH
+	bool "ash"
+	default y
+	select BUSYBOX_CONFIG_TEST
+	help
+	  Tha 'ash' shell adds about 60k in the default configuration and is
+	  the most complete and most pedantically correct shell included with
+	  busybox.  This shell is actually a derivative of the Debian 'dash'
+	  shell (by Herbert Xu), which was created by porting the 'ash' shell
+	  (written by Kenneth Almquist) from NetBSD.
+
+comment "Ash Shell Options"
+	depends on BUSYBOX_CONFIG_ASH
+
+config BUSYBOX_CONFIG_ASH_JOB_CONTROL
+	bool "Job control"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable job control in the ash shell.
+
+config BUSYBOX_CONFIG_ASH_READ_NCHARS
+	bool "'read -n N' and 'read -s' support"
+	default n
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  'read -n N' will return a value after N characters have been read.
+	  'read -s' will read without echoing the user's input.
+
+config BUSYBOX_CONFIG_ASH_READ_TIMEOUT
+	bool "'read -t S' support."
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  'read -t S' will return a value after S seconds have passed.
+	  This implementation will allow fractional seconds, expressed
+	  as a decimal fraction, e.g. 'read -t 2.5 foo'.
+
+config BUSYBOX_CONFIG_ASH_ALIAS
+	bool "alias support"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable alias support in the ash shell.
+
+config BUSYBOX_CONFIG_ASH_MATH_SUPPORT
+	bool "Posix math support"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable math support in the ash shell.
+
+config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
+	bool "Extend Posix math support to 64 bit"
+	default n
+	depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
+	help
+	  Enable 64-bit math support in the ash shell.  This will make
+	  the shell slightly larger, but will allow computation with very
+	  large numbers.
+
+config BUSYBOX_CONFIG_ASH_GETOPTS
+	bool "Builtin getopt to parse positional parameters"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable getopts builtin in the ash shell.
+
+config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
+	bool "Builtin version of 'echo'"
+	default y
+	select BUSYBOX_CONFIG_ECHO
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable support for echo, built in to ash.
+
+config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
+	bool "Builtin version of 'test'"
+	default y
+	select BUSYBOX_CONFIG_TEST
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable support for test, built in to ash.
+
+config BUSYBOX_CONFIG_ASH_CMDCMD
+	bool "'command' command to override shell builtins"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable support for the ash 'command' builtin, which allows
+	  you to run the specified command with the specified arguments,
+	  even when there is an ash builtin command with the same name.
+
+config BUSYBOX_CONFIG_ASH_MAIL
+	bool "Check for new mail on interactive shells"
+	default n
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable "check for new mail" in the ash shell.
+
+config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
+	bool "Optimize for size instead of speed"
+	default y
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Compile ash for reduced size at the price of speed.
+
+config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT
+	bool "Pseudorandom generator and variable $RANDOM"
+	default n
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  Enable pseudorandom generator and dynamic variable "$RANDOM".
+	  Each read of "$RANDOM" will generate a new pseudorandom value.
+	  You can reset the generator by using a specified start value.
+	  After "unset RANDOM" then generator will switch off and this
+	  variable will no longer have special treatment.
+
+config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
+	bool "Expand prompt string"
+	default n
+	depends on BUSYBOX_CONFIG_ASH
+	help
+	  "PS#" may be contain volatile content, such as backquote commands.
+	  This option recreates the prompt string from the environment
+	  variable each time it is displayed.
+
+config BUSYBOX_CONFIG_HUSH
+	bool "hush"
+	default n
+	select BUSYBOX_CONFIG_TRUE
+	select BUSYBOX_CONFIG_FALSE
+	select BUSYBOX_CONFIG_TEST
+	help
+	  hush is a very small shell (just 18k) and it has fairly complete
+	  Bourne shell grammar.  It even handles all the normal flow control
+	  options such as if/then/elif/else/fi, for/in/do/done, while loops,
+	  etc.
+
+	  It does not handle case/esac, select, function, here documents ( <<
+	  word ), arithmetic expansion, aliases, brace expansion, tilde
+	  expansion, &> and >& redirection of stdout+stderr, etc.
+
+
+config BUSYBOX_CONFIG_LASH
+	bool "lash"
+	default n
+	select BUSYBOX_CONFIG_TRUE
+	select BUSYBOX_CONFIG_FALSE
+	select BUSYBOX_CONFIG_TEST
+	help
+	  lash is the very smallest shell (adds just 10k) and it is quite
+	  usable as a command prompt, but it is not suitable for any but the
+	  most trivial scripting (such as an initrd that calls insmod a few
+	  times) since it does not understand any Bourne shell grammar.  It
+	  does handle pipes, redirects, and job control though.  Adding in
+	  command editing makes it a very nice lightweight command prompt.
+
+
+config BUSYBOX_CONFIG_MSH
+	bool "msh"
+	default n
+	select BUSYBOX_CONFIG_TRUE
+	select BUSYBOX_CONFIG_FALSE
+	select BUSYBOX_CONFIG_TEST
+	help
+	  The minix shell (adds just 30k) is quite complete and handles things
+	  like for/do/done, case/esac and all the things you expect a Bourne
+	  shell to do.  It is not always pedantically correct about Bourne
+	  shell grammar (try running the shell testscript "tests/sh.testcases"
+	  on it and compare vs bash) but for most things it works quite well.
+	  It also uses only vfork, so it can be used on uClinux systems.
+
+comment "Bourne Shell Options"
+	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+
+config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
+	bool "Hide message on interactive shell startup"
+	default n
+	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+	help
+	  Remove the busybox introduction when starting a shell.
+
+config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
+	bool "Standalone shell"
+	default n
+	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+	help
+	  This option causes the selected busybox shell to use busybox applets
+	  in preference to executables in the PATH whenever possible.  For
+	  example, entering the command 'ifconfig' into the shell would cause
+	  busybox to use the ifconfig busybox applet.  Specifying the fully
+	  qualified executable name, such as '/sbin/ifconfig' will still
+	  execute the /sbin/ifconfig executable on the filesystem.  This option
+	  is generally used when creating a statically linked version of busybox
+	  for use as a rescue shell, in the event that you screw up your system.
+
+	  Note that this will *also* cause applets to take precedence
+	  over shell builtins of the same name.  So turning this on will
+	  eliminate any performance gained by turning on the builtin "echo"
+	  and "test" commands in ash.
+
+	  Note that when using this option, the shell will attempt to directly
+	  run '/bin/busybox'.  If you do not have the busybox binary sitting in
+	  that exact location with that exact name, this option will not work at
+	  all.
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	bool "Command line editing"
+	default y
+	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+	help
+	  Enable command editing in shell.
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING_VI
+	bool "vi-style line editing commands"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	help
+	  Enable vi-style line editing in the shell.  This mode can be
+	  turned on and off with "set -o vi" and "set +o vi".
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_HISTORY
+	int "History size"
+	default 15
+	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	help
+	  Specify command history size in shell.
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_SAVEHISTORY
+	bool "History saving"
+	default n
+	depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	help
+	  Enable history saving in ash shell.
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
+	bool "Tab completion"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	help
+	  Enable tab completion in shell.
+
+config BUSYBOX_CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION
+	bool "Username completion"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
+	help
+	  Enable username completion in shell.
+
+config BUSYBOX_CONFIG_FEATURE_SH_FANCY_PROMPT
+	bool "Fancy shell prompts"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+	help
+	  Setting this option allows for prompts to use things like \w and
+	  \$ and also using escape codes.
+
+endmenu
diff --git a/package/busybox/config/sysklogd/Config.in b/package/busybox/config/sysklogd/Config.in
new file mode 100644
index 0000000000..f120695664
--- /dev/null
+++ b/package/busybox/config/sysklogd/Config.in
@@ -0,0 +1,109 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "System Logging Utilities"
+
+config BUSYBOX_CONFIG_SYSLOGD
+	bool "syslogd"
+	default y
+	help
+	  The syslogd utility is used to record logs of all the
+	  significant events that occur on a system.  Every
+	  message that is logged records the date and time of the
+	  event, and will generally also record the name of the
+	  application that generated the message.  When used in
+	  conjunction with klogd, messages from the Linux kernel
+	  can also be recorded.  This is terribly useful,
+	  especially for finding what happened when something goes
+	  wrong.  And something almost always will go wrong if
+	  you wait long enough....
+
+config BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE
+	bool "Rotate message files"
+	default y
+	depends on BUSYBOX_CONFIG_SYSLOGD
+	help
+	  This enables syslogd to rotate the message files
+	  on his own. No need to use an external rotatescript.
+
+config BUSYBOX_CONFIG_FEATURE_REMOTE_LOG
+	bool "Remote Log support"
+	default y
+	depends on BUSYBOX_CONFIG_SYSLOGD
+	help
+	  When you enable this feature, the syslogd utility can
+	  be used to send system log messages to another system
+	  connected via a network.  This allows the remote
+	  machine to log all the system messages, which can be
+	  terribly useful for reducing the number of serial
+	  cables you use.  It can also be a very good security
+	  measure to prevent system logs from being tampered with
+	  by an intruder.
+
+config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
+	bool "Circular Buffer support"
+	default y
+	depends on BUSYBOX_CONFIG_SYSLOGD
+	help
+	  When you enable this feature, the syslogd utility will
+	  use a circular buffer to record system log messages.
+	  When the buffer is filled it will continue to overwrite
+	  the oldest messages.  This can be very useful for
+	  systems with little or no permanent storage, since
+	  otherwise system logs can eventually fill up your
+	  entire filesystem, which may cause your system to
+	  break badly.
+
+config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE
+	int "    Circular buffer size in Kbytes (minimum 4KB)"
+	default 16
+	depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
+	help
+	  This option sets the size of the circular buffer
+	  used to record system log messages.
+
+config BUSYBOX_CONFIG_LOGREAD
+	bool "logread"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
+	help
+	  If you enabled Circular Buffer support, you almost
+	  certainly want to enable this feature as well.  This
+	  utility will allow you to read the messages that are
+	  stored in the syslogd circular buffer.
+
+config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING
+	bool "logread double buffering"
+	default n
+	depends on BUSYBOX_CONFIG_LOGREAD
+	help
+	  'logread' ouput to slow serial terminals can have
+	  side effects on syslog because of the semaphore.
+	  This option make logread to double buffer copy
+	  from circular buffer, minimizing semaphore
+	  contention at some minor memory expense.
+
+config BUSYBOX_CONFIG_KLOGD
+	bool "klogd"
+	default y
+	depends on BUSYBOX_CONFIG_SYSLOGD
+	help
+	  klogd is a utility which intercepts and logs all
+	  messages from the Linux kernel and sends the messages
+	  out to the 'syslogd' utility so they can be logged.  If
+	  you wish to record the messages produced by the kernel,
+	  you should enable this option.
+
+config BUSYBOX_CONFIG_LOGGER
+	bool "logger"
+	default y
+	help
+	    The logger utility allows you to send arbitrary text
+	    messages to the system log (i.e. the 'syslogd' utility) so
+	    they can be logged.  This is generally used to help locate
+	    problems that occur within programs and scripts.
+
+endmenu
+
diff --git a/package/busybox/config/util-linux/Config.in b/package/busybox/config/util-linux/Config.in
new file mode 100644
index 0000000000..b7a8ae91f5
--- /dev/null
+++ b/package/busybox/config/util-linux/Config.in
@@ -0,0 +1,480 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Linux System Utilities"
+
+config BUSYBOX_CONFIG_DMESG
+	bool "dmesg"
+	default y
+	help
+	  dmesg is used to examine or control the kernel ring buffer.  When the
+	  Linux kernel prints messages to the system log, they are stored in
+	  the kernel ring buffer.  You can use dmesg to print the kernel's ring
+	  buffer, clear the kernel ring buffer, change the size of the kernel
+	  ring buffer, and change the priority level at which kernel messages
+	  are also logged to the system console.  Enable this option if you
+	  wish to enable the 'dmesg' utility.
+
+config BUSYBOX_CONFIG_FBSET
+	bool "fbset"
+	default n
+	help
+	  fbset is used to show or change the settings of a Linux frame buffer
+	  device.  The frame buffer device provides a simple and unique
+	  interface to access a graphics display.  Enable this option
+	  if you wish to enable the 'fbset' utility.
+
+config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
+	bool "Turn on extra fbset options"
+	default n
+	depends on BUSYBOX_CONFIG_FBSET
+	help
+	  This option enables extended fbset options, allowing one to set the
+	  framebuffer size, color depth, etc.  interface to access a graphics
+	  display.  Enable this option if you wish to enable extended fbset
+	  options.
+
+config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
+	bool "Turn on fbset readmode support"
+	default n
+	depends on BUSYBOX_CONFIG_FBSET
+	help
+	  This option allows fbset to read the video mode database stored by
+	  default n /etc/fb.modes, which can be used to set frame buffer
+	  device to pre-defined video modes.
+
+config BUSYBOX_CONFIG_FDFLUSH
+	bool "fdflush"
+	default n
+	help
+	  fdflush is only needed when changing media on slightly-broken
+	  removable media drives.  It is used to make Linux believe that a
+	  hardware disk-change switch has been actuated, which causes Linux to
+	  forget anything it has cached from the previous media.  If you have
+	  such a slightly-broken drive, you will need to run fdflush every time
+	  you change a disk.  Most people have working hardware and can safely
+	  leave this disabled.
+
+config BUSYBOX_CONFIG_FDFORMAT
+	bool "fdformat"
+	default n
+	help
+	  fdformat is used to low-level format a floppy disk.
+
+config BUSYBOX_CONFIG_FDISK
+	bool "fdisk"
+	default n
+	help
+	  The fdisk utility is used to divide hard disks into one or more
+	  logical disks, which are generally called partitions.  This utility
+	  can be used to list and edit the set of partitions or BSD style
+	  'disk slices' that are defined on a hard drive.
+
+config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
+	bool
+	default y
+	depends on BUSYBOX_CONFIG_FDISK
+	help
+	  Enable this option to support large disks > 4GB.
+
+config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	bool "Write support"
+	default n
+	depends on BUSYBOX_CONFIG_FDISK
+	help
+	  Enabling this option allows you to create or change a partition table
+	  and write those changes out to disk.  If you leave this option
+	  disabled, you will only be able to view the partition table.
+
+config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
+	bool "Support AIX disklabels"
+	default n
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	help
+	  Enabling this option allows you to create or change AIX disklabels.
+	  Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
+	bool "Support SGI disklabels"
+	default n
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	help
+	  Enabling this option allows you to create or change SGI disklabels.
+	  Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
+	bool "Support SUN disklabels"
+	default n
+ 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	help
+	  Enabling this option allows you to create or change SUN disklabels.
+	  Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
+	bool "Support BSD disklabels"
+	default n
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	help
+	  Enabling this option allows you to create or change BSD disklabels
+	  and define and edit BSD disk slices.
+
+config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
+	bool "Support expert mode"
+	default n
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	help
+	  Enabling this option allows you to do terribly unsafe things like
+	  define arbitrary drive geometry, move the beginning of data in a
+	  partition, and similarly evil things.  Unless you have a very good
+	  reason you would be wise to leave this disabled.
+
+config BUSYBOX_CONFIG_FREERAMDISK
+	bool "freeramdisk"
+	default n
+	help
+	  Linux allows you to create ramdisks.  This utility allows you to
+	  delete them and completely free all memory that was used for the
+	  ramdisk.  For example, if you boot Linux into a ramdisk and later
+	  pivot_root, you may want to free the memory that is allocated to the
+	  ramdisk.  If you have no use for freeing memory from a ramdisk, leave
+	  this disabled.
+
+config BUSYBOX_CONFIG_FSCK_MINIX
+	bool "fsck_minix"
+	default n
+	help
+	  The minix filesystem is a nice, small, compact, read-write filesystem
+	  with little overhead.  It is not a journaling filesystem however and
+	  can experience corruption if it is not properly unmounted or if the
+	  power goes off in the middle of a write.  This utility allows you to
+	  check for and attempt to repair any corruption that occurs to a minix
+	  filesystem.
+
+config BUSYBOX_CONFIG_MKFS_MINIX
+	bool "mkfs_minix"
+	default n
+	help
+	  The minix filesystem is a nice, small, compact, read-write filesystem
+	  with little overhead.  If you wish to be able to create minix filesystems
+	  this utility will do the job for you.
+
+comment "Minix filesystem support"
+    depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+
+config BUSYBOX_CONFIG_FEATURE_MINIX2
+	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
+	default n
+	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+	help
+	  If you wish to be able to create version 2 minix filesystems, enable this.
+	  If you enabled 'mkfs_minix' then you almost certainly want to be using the
+	  version 2 filesystem support.
+
+config BUSYBOX_CONFIG_GETOPT
+	bool "getopt"
+	default n
+	help
+	  The getopt utility is used to break up (parse) options in command
+	  lines to make it easy to write complex shell scripts that also check
+	  for legal (and illegal) options.  If you want to write horribly
+	  complex shell scripts, or use some horribly complex shell script
+	  written by others, this utility may be for you.  Most people will
+	  wisely leave this disabled.
+
+config BUSYBOX_CONFIG_HEXDUMP
+	bool "hexdump"
+	default y
+	help
+	  The hexdump utility is used to display binary data in a readable
+	  way that is comparable to the output from most hex editors.
+
+config BUSYBOX_CONFIG_HWCLOCK
+	bool "hwclock"
+	default n
+	help
+	  The hwclock utility is used to read and set the hardware clock
+	  on a system.  This is primarily used to set the current time on
+	  shutdown in the hardware clock, so the hardware will keep the
+	  correct time when Linux is _not_ running.
+
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
+	bool "Support long options (--hctosys,...)"
+	default n
+	depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  By default, the hwclock utility only uses short options.  If you
+	  are overly fond of its long options, such as --hctosys, --utc, etc)
+	  then enable this option.
+
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
+	bool "Use FHS /var/lib/hwclock/adjtime"
+	default n
+	depends on BUSYBOX_CONFIG_HWCLOCK
+	help
+	  Starting with FHS 2.3, the adjtime state file is supposed to exist
+	  at /var/lib/hwclock/adjtime instead of /etc/adjtime.  If you wish
+	  to use the FHS behavior, answer Y here, otherwise answer N for the
+	  classic /etc/adjtime path.
+
+	  http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+
+config BUSYBOX_CONFIG_IPCRM
+	bool "ipcrm"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  The ipcrm utility allows the removal of System V interprocess
+	  communication (IPC) objects and the associated data structures
+	  from the system.
+
+config BUSYBOX_CONFIG_IPCS
+	bool "ipcs"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  The ipcs utility is used to provide information on the currently
+	  allocated System V interprocess (IPC) objects in the system.
+
+config BUSYBOX_CONFIG_LOSETUP
+	bool "losetup"
+	default n
+	help
+	  losetup is used to associate or detach a loop device with a regular
+	  file or block device, and to query the status of a loop device.  This
+	  version does not currently support enabling data encryption.
+
+config BUSYBOX_CONFIG_MDEV
+	bool "mdev"
+	default n
+	help
+	  mdev is a mini-udev implementation: call it with -s to populate
+	  /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to
+	  have it handle hotplug events afterwards.  Device names are taken
+	  from sysfs.
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	bool "Support /etc/mdev.conf"
+	default n
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  The mdev config file contains lines that look like:
+
+	    hd[a-z][0-9]* 0:3 660
+
+	  That's device name (with regex match), uid:gid, and permissions.
+
+	  Config file parsing stops on the first matching line.  If no config
+	  entry is matched, devices are created with default 0:0 660.  (Make
+	  the last line match .* to override this.)
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+	bool "Support command execution at device addition/removal"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	help
+	  This adds support for an optional field to /etc/mdev.conf, consisting
+	  of a special character and a command line to run after creating the
+	  corresponding device(s) and before removing, ala:
+
+	    hdc root:cdrom 660  *ln -s $MDEV cdrom
+
+	  The $MDEV environment variable is set to the name of the device.
+
+	  The special characters and their meanings are:
+	    @ Run after creating the device.
+	    $ Run before removing the device.
+	    * Run both after creating and before removing the device.
+
+	  Commands are executed via system() so you need /bin/sh, meaning you
+	  probably want to select a default shell in the Shells menu.
+
+config BUSYBOX_CONFIG_MKSWAP
+	bool "mkswap"
+	default n
+	help
+	  The mkswap utility is used to configure a file or disk partition as
+	  Linux swap space.  This allows Linux to use the entire file or
+	  partition as if it were additional RAM, which can greatly increase
+	  the capability of low-memory machines.  This additional memory is
+	  much slower than real RAM, but can be very helpful at preventing your
+	  applications being killed by the Linux out of memory (OOM) killer.
+	  Once you have created swap space using 'mkswap' you need to enable
+	  the swap space using the 'swapon' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_V0
+	bool "version 0 support"
+	default n
+	depends on BUSYBOX_CONFIG_MKSWAP
+#	depends on BUSYBOX_CONFIG_MKSWAP && BUSYBOX_CONFIG_DEPRECATED
+	help
+	  Enable support for the old v0 style.
+	  If your kernel is older than 2.1.117, then v0 support is the
+	  only option.
+
+config BUSYBOX_CONFIG_MORE
+	bool "more"
+	default n
+	help
+	  more is a simple utility which allows you to read text one screen
+	  sized page at a time.  If you want to read text that is larger than
+	  the screen, and you are using anything faster than a 300 baud modem,
+	  you will probably find this utility very helpful.  If you don't have
+	  any need to reading text files, you can leave this disabled.
+
+config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
+	bool "Use termios to manipulate the screen"
+	default y
+	depends on BUSYBOX_CONFIG_MORE
+	help
+	  This option allows utilities such as 'more' and 'top' to determine
+	  the size of the screen.  If you leave this disabled, your utilities
+	  that display things on the screen will be especially primitive and
+	  will be unable to determine the current screen size, and will be
+	  unable to move the cursor.
+
+config BUSYBOX_CONFIG_MOUNT
+	bool "mount"
+	default y
+	help
+	  All files and filesystems in Unix are arranged into one big directory
+	  tree.  The 'mount' utility is used to graft a filesystem onto a
+	  particular part of the tree.  A filesystem can either live on a block
+	  device, or it can be accessible over the network, as is the case with
+	  NFS filesystems.  Most people using BusyBox will also want to enable
+	  the 'mount' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+	bool "Support mounting NFS file systems"
+	default y
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	 Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_PIVOT_ROOT
+	bool "pivot_root"
+	default y
+	help
+	  The pivot_root utility swaps the mount points for the root filesystem
+	  with some other mounted filesystem.  This allows you to do all sorts
+	  of wild and crazy things with your Linux system and is far more
+	  powerful than 'chroot'.
+
+	  Note: This is for initrd in linux 2.4.  Under initramfs (introduced
+	  in linux 2.6) use switch_root instead.
+
+config BUSYBOX_CONFIG_RDATE
+	bool "rdate"
+	default y
+	help
+	  The rdate utility allows you to synchronize the date and time of your
+	  system clock with the date and time of a remote networked system using
+	  the RFC868 protocol, which is built into the inetd daemon on most
+	  systems.
+
+config BUSYBOX_CONFIG_READPROFILE
+	bool "readprofile"
+	default n
+	help
+	  This allows you to parse /proc/profile for basic profiling.
+
+config BUSYBOX_CONFIG_SETARCH
+	bool "setarch"
+	default n
+	help
+	  The linux32 utility is used to create a 32bit environment for the
+	  specified program (usually a shell).  It only makes sense to have
+	  this util on a system that supports both 64bit and 32bit userland
+	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+
+config BUSYBOX_CONFIG_SWAPONOFF
+	bool "swaponoff"
+	default n
+	help
+	  This option enables both the 'swapon' and the 'swapoff' utilities.
+	  Once you have created some swap space using 'mkswap', you also need
+	  to enable your swap space with the 'swapon' utility.  The 'swapoff'
+	  utility is used, typically at system shutdown, to disable any swap
+	  space.  If you are not using any swap space, you can leave this
+	  option disabled.
+
+config BUSYBOX_CONFIG_SWITCH_ROOT
+	bool "switch_root"
+	default y
+	help
+	  The switch_root utility is used from initramfs to select a new
+	  root device.  Under initramfs, you have to use this instead of
+	  pivot_root.  (Stop reading here if you don't care why.)
+
+	  Booting with initramfs extracts a gzipped cpio archive into rootfs
+	  (which is a variant of ramfs/tmpfs).  Because rootfs can't be moved
+	  or unmounted*, pivot_root will not work from initramfs.  Instead,
+	  switch_root deletes everything out of rootfs (including itself),
+	  does a mount --move that overmounts rootfs with the new root, and
+	  then execs the specified init program.
+
+	  * Because the Linux kernel uses rootfs internally as the starting
+	  and ending point for searching through the kernel's doubly linked
+	  list of active mount points.  That's why.
+
+config BUSYBOX_CONFIG_UMOUNT
+	bool "umount"
+	default y
+	help
+	  When you want to remove a mounted filesystem from its current mount point,
+	  for example when you are shutting down the system, the 'umount' utility is
+	  the tool to use.  If you enabled the 'mount' utility, you almost certainly
+	  also want to enable 'umount'.
+
+config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
+	bool "umount -a option"
+	default y
+	depends on BUSYBOX_CONFIG_UMOUNT
+	help
+	  Support -a option to unmount all currently mounted filesystems.
+
+comment "Common options for mount/umount"
+	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
+	bool "Support loopback mounts"
+	default y
+	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+	help
+	  Enabling this feature allows automatic mounting of files (containing
+	  filesystem images) via the linux kernel's loopback devices.  The mount
+	  command will detect you are trying to mount a file instead of a block
+	  device, and transparently associate the file with a loopback device.
+	  The umount command will also free that loopback device.
+
+	  You can still use the 'losetup' utility (to manually associate files
+          with loop devices) if you need to do something advanced, such as
+	  specify an offset or cryptographic options to the loopback device.
+	  (If you don't want umount to free the loop device, use "umount -D".)
+
+config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
+	bool "Support for the old /etc/mtab file"
+	default n
+	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+	help
+	  Historically, Unix systems kept track of the currently mounted
+	  partitions in the file "/etc/mtab".  These days, the kernel exports
+	  the list of currently mounted partitions in "/proc/mounts", rendering
+	  the old mtab file obsolete.  (In modern systems, /etc/mtab should be
+	  a symlink to /proc/mounts.)
+
+	  The only reason to have mount maintain an /etc/mtab file itself is if
+	  your stripped-down embedded system does not have a /proc directory.
+	  If you must use this, keep in mind it's inherently brittle (for
+	  example a mount under chroot won't update it), can't handle modern
+	  features like separate per-process filesystem namespaces, requires
+	  that your /etc directory be writeable, tends to get easily confused
+	  by --bind or --move mounts, won't update if you rename a directory
+	  that contains a mount point, and so on.  (In brief: avoid.)
+
+	  About the only reason to use this is if you've removed /proc from
+	  your kernel.
+
+endmenu
+