packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

1 files changed, 0 insertions, 985 deletions

diff --git a/package/busybox/config/util-linux/Config.in b/package/busybox/config/util-linux/Config.in
deleted file mode 100644
index d60b139a8b..0000000000
--- a/package/busybox/config/util-linux/Config.in
+++ /dev/null
@@ -1,985 +0,0 @@
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Linux System Utilities"
-
-config BUSYBOX_CONFIG_BLOCKDEV
-	bool "blockdev"
-	default n
-	help
-	  Performs some ioctls with block devices.
-config BUSYBOX_CONFIG_REV
-	bool "rev"
-	default n
-	help
-	  Reverse lines of a file or files.
-
-config BUSYBOX_CONFIG_ACPID
-	bool "acpid"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  acpid listens to ACPI events coming either in textual form from
-	  /proc/acpi/event (though it is marked deprecated it is still widely
-	  used and _is_ a standard) or in binary form from specified evdevs
-	  (just use /dev/input/event*).
-
-	  It parses the event to retrieve ACTION and a possible PARAMETER.
-	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-	  (if the resulting path is a directory) or directly as an executable.
-
-	  N.B. acpid relies on run-parts so have the latter installed.
-
-config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
-	bool "Accept and ignore redundant options"
-	default n
-	depends on BUSYBOX_CONFIG_ACPID
-	help
-	  Accept and ignore compatibility options -g -m -s -S -v.
-
-config BUSYBOX_CONFIG_BLKID
-	bool "blkid"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_VOLUMEID
-	help
-	  Lists labels and UUIDs of all filesystems.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
-
-config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
-	bool "Print filesystem type"
-	default n
-	depends on BUSYBOX_CONFIG_BLKID
-	help
-	  Show TYPE="filesystem type"
-
-config BUSYBOX_CONFIG_DMESG
-	bool "dmesg"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  dmesg is used to examine or control the kernel ring buffer. When the
-	  Linux kernel prints messages to the system log, they are stored in
-	  the kernel ring buffer. You can use dmesg to print the kernel's ring
-	  buffer, clear the kernel ring buffer, change the size of the kernel
-	  ring buffer, and change the priority level at which kernel messages
-	  are also logged to the system console. Enable this option if you
-	  wish to enable the 'dmesg' utility.
-
-config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
-	bool "Pretty dmesg output"
-	default y
-	depends on BUSYBOX_CONFIG_DMESG
-	help
-	  If you wish to scrub the syslog level from the output, say 'Y' here.
-	  The syslog level is a string prefixed to every line with the form
-	  "<#>".
-
-	  With this option you will see:
-	    # dmesg
-	    Linux version 2.6.17.4 .....
-	    BIOS-provided physical RAM map:
-	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
-
-	  Without this option you will see:
-	    # dmesg
-	    <5>Linux version 2.6.17.4 .....
-	    <6>BIOS-provided physical RAM map:
-	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
-
-config BUSYBOX_CONFIG_FBSET
-	bool "fbset"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  fbset is used to show or change the settings of a Linux frame buffer
-	  device. The frame buffer device provides a simple and unique
-	  interface to access a graphics display. Enable this option
-	  if you wish to enable the 'fbset' utility.
-
-config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
-	bool "Turn on extra fbset options"
-	default n
-	depends on BUSYBOX_CONFIG_FBSET
-	help
-	  This option enables extended fbset options, allowing one to set the
-	  framebuffer size, color depth, etc. interface to access a graphics
-	  display. Enable this option if you wish to enable extended fbset
-	  options.
-
-config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
-	bool "Turn on fbset readmode support"
-	default n
-	depends on BUSYBOX_CONFIG_FBSET
-	help
-	  This option allows fbset to read the video mode database stored by
-	  default n /etc/fb.modes, which can be used to set frame buffer
-	  device to pre-defined video modes.
-
-config BUSYBOX_CONFIG_FDFLUSH
-	bool "fdflush"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  fdflush is only needed when changing media on slightly-broken
-	  removable media drives. It is used to make Linux believe that a
-	  hardware disk-change switch has been actuated, which causes Linux to
-	  forget anything it has cached from the previous media. If you have
-	  such a slightly-broken drive, you will need to run fdflush every time
-	  you change a disk. Most people have working hardware and can safely
-	  leave this disabled.
-
-config BUSYBOX_CONFIG_FDFORMAT
-	bool "fdformat"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  fdformat is used to low-level format a floppy disk.
-
-config BUSYBOX_CONFIG_FDISK
-	bool "fdisk"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The fdisk utility is used to divide hard disks into one or more
-	  logical disks, which are generally called partitions. This utility
-	  can be used to list and edit the set of partitions or BSD style
-	  'disk slices' that are defined on a hard drive.
-
-config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
-	bool "Support over 4GB disks"
-	default y
-	depends on BUSYBOX_CONFIG_FDISK
-	depends on !BUSYBOX_CONFIG_LFS   # with LFS no special code is needed
-	help
-	  Enable this option to support large disks > 4GB.
-
-config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	bool "Write support"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK
-	help
-	  Enabling this option allows you to create or change a partition table
-	  and write those changes out to disk. If you leave this option
-	  disabled, you will only be able to view the partition table.
-
-config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
-	bool "Support AIX disklabels"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change AIX disklabels.
-	  Most people can safely leave this option disabled.
-
-config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
-	bool "Support SGI disklabels"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change SGI disklabels.
-	  Most people can safely leave this option disabled.
-
-config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
-	bool "Support SUN disklabels"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change SUN disklabels.
-	  Most people can safely leave this option disabled.
-
-config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
-	bool "Support BSD disklabels"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change BSD disklabels
-	  and define and edit BSD disk slices.
-
-config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
-	bool "Support GPT disklabels"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to view GUID Partition Table
-	  disklabels.
-
-config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
-	bool "Support expert mode"
-	default n
-	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to do terribly unsafe things like
-	  define arbitrary drive geometry, move the beginning of data in a
-	  partition, and similarly evil things. Unless you have a very good
-	  reason you would be wise to leave this disabled.
-
-config BUSYBOX_CONFIG_FINDFS
-	bool "findfs"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_VOLUMEID
-	help
-	  Prints the name of a filesystem with given label or UUID.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
-
-config BUSYBOX_CONFIG_FLOCK
-	bool "flock"
-	default n
-	help
-	  Manage locks from shell scripts
-
-config BUSYBOX_CONFIG_FREERAMDISK
-	bool "freeramdisk"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Linux allows you to create ramdisks. This utility allows you to
-	  delete them and completely free all memory that was used for the
-	  ramdisk. For example, if you boot Linux into a ramdisk and later
-	  pivot_root, you may want to free the memory that is allocated to the
-	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
-	  this disabled.
-
-config BUSYBOX_CONFIG_FSCK_MINIX
-	bool "fsck_minix"
-	default n
-	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. It is not a journaling filesystem however and
-	  can experience corruption if it is not properly unmounted or if the
-	  power goes off in the middle of a write. This utility allows you to
-	  check for and attempt to repair any corruption that occurs to a minix
-	  filesystem.
-
-config BUSYBOX_CONFIG_MKFS_EXT2
-	bool "mkfs_ext2"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Utility to create EXT2 filesystems.
-
-config BUSYBOX_CONFIG_MKFS_MINIX
-	bool "mkfs_minix"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. If you wish to be able to create minix
-	  filesystems this utility will do the job for you.
-
-config BUSYBOX_CONFIG_FEATURE_MINIX2
-	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
-	default n
-	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
-	help
-	  If you wish to be able to create version 2 minix filesystems, enable
-	  this. If you enabled 'mkfs_minix' then you almost certainly want to
-	  be using the version 2 filesystem support.
-
-config BUSYBOX_CONFIG_MKFS_REISER
-	bool "mkfs_reiser"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Utility to create ReiserFS filesystems.
-	  Note: this applet needs a lot of testing and polishing.
-
-config BUSYBOX_CONFIG_MKFS_VFAT
-	bool "mkfs_vfat"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Utility to create FAT32 filesystems.
-
-config BUSYBOX_CONFIG_GETOPT
-	bool "getopt"
-	default n
-	help
-	  The getopt utility is used to break up (parse) options in command
-	  lines to make it easy to write complex shell scripts that also check
-	  for legal (and illegal) options. If you want to write horribly
-	  complex shell scripts, or use some horribly complex shell script
-	  written by others, this utility may be for you. Most people will
-	  wisely leave this disabled.
-
-config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
-	bool "Support option -l"
-	default n if BUSYBOX_CONFIG_LONG_OPTS
-	depends on BUSYBOX_CONFIG_GETOPT
-	help
-	  Enable support for long options (option -l).
-
-config BUSYBOX_CONFIG_HEXDUMP
-	bool "hexdump"
-	default y
-	help
-	  The hexdump utility is used to display binary data in a readable
-	  way that is comparable to the output from most hex editors.
-
-config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
-	bool "Support -R, reverse of 'hexdump -Cv'"
-	default n
-	depends on BUSYBOX_CONFIG_HEXDUMP
-	help
-	  The hexdump utility is used to display binary data in an ascii
-	  readable way. This option creates binary data from an ascii input.
-	  NB: this option is non-standard. It's unwise to use it in scripts
-	  aimed to be portable.
-
-config BUSYBOX_CONFIG_HD
-	bool "hd"
-	default n
-	depends on BUSYBOX_CONFIG_HEXDUMP
-	help
-	  hd is an alias to hexdump -C.
-
-config BUSYBOX_CONFIG_HWCLOCK
-	bool "hwclock"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The hwclock utility is used to read and set the hardware clock
-	  on a system. This is primarily used to set the current time on
-	  shutdown in the hardware clock, so the hardware will keep the
-	  correct time when Linux is _not_ running.
-
-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
-	bool "Support long options (--hctosys,...)"
-	default n
-	depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
-	help
-	  By default, the hwclock utility only uses short options. If you
-	  are overly fond of its long options, such as --hctosys, --utc, etc)
-	  then enable this option.
-
-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
-	bool "Use FHS /var/lib/hwclock/adjtime"
-	default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
-	depends on BUSYBOX_CONFIG_HWCLOCK
-	help
-	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-	  to use the FHS behavior, answer Y here, otherwise answer N for the
-	  classic /etc/adjtime path.
-
-	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
-
-config BUSYBOX_CONFIG_IPCRM
-	bool "ipcrm"
-	default n
-	help
-	  The ipcrm utility allows the removal of System V interprocess
-	  communication (IPC) objects and the associated data structures
-	  from the system.
-
-config BUSYBOX_CONFIG_IPCS
-	bool "ipcs"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The ipcs utility is used to provide information on the currently
-	  allocated System V interprocess (IPC) objects in the system.
-
-config BUSYBOX_CONFIG_LOSETUP
-	bool "losetup"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  losetup is used to associate or detach a loop device with a regular
-	  file or block device, and to query the status of a loop device. This
-	  version does not currently support enabling data encryption.
-
-config BUSYBOX_CONFIG_LSPCI
-	bool "lspci"
-	default n
-	#select PLATFORM_LINUX
-	help
-	  lspci is a utility for displaying information about PCI buses in the
-	  system and devices connected to them.
-
-	  This version uses sysfs (/sys/bus/pci/devices) only.
-
-config BUSYBOX_CONFIG_LSUSB
-	bool "lsusb"
-	default n
-	#select PLATFORM_LINUX
-	help
-	  lsusb is a utility for displaying information about USB buses in the
-	  system and devices connected to them.
-
-	  This version uses sysfs (/sys/bus/usb/devices) only.
-
-config BUSYBOX_CONFIG_MDEV
-	bool "mdev"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  mdev is a mini-udev implementation for dynamically creating device
-	  nodes in the /dev directory.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	bool "Support /etc/mdev.conf"
-	default n
-	depends on BUSYBOX_CONFIG_MDEV
-	help
-	  Add support for the mdev config file to control ownership and
-	  permissions of the device nodes.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
-	bool "Support subdirs/symlinks"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	help
-	  Add support for renaming devices and creating symlinks.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
-	bool "Support regular expressions substitutions when renaming device"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
-	help
-	  Add support for regular expressions substitutions when renaming
-	  device.
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
-	bool "Support command execution at device addition/removal"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	help
-	  This adds support for an optional field to /etc/mdev.conf for
-	  executing commands when devices are created/removed.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
-	bool "Support loading of firmwares"
-	default n
-	depends on BUSYBOX_CONFIG_MDEV
-	help
-	  Some devices need to load firmware before they can be usable.
-
-	  These devices will request userspace look up the files in
-	  /lib/firmware/ and if it exists, send it to the kernel for
-	  loading into the hardware.
-
-config BUSYBOX_CONFIG_MKSWAP
-	bool "mkswap"
-	default y
-	help
-	  The mkswap utility is used to configure a file or disk partition as
-	  Linux swap space. This allows Linux to use the entire file or
-	  partition as if it were additional RAM, which can greatly increase
-	  the capability of low-memory machines. This additional memory is
-	  much slower than real RAM, but can be very helpful at preventing your
-	  applications being killed by the Linux out of memory (OOM) killer.
-	  Once you have created swap space using 'mkswap' you need to enable
-	  the swap space using the 'swapon' utility.
-
-config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
-	bool "UUID support"
-	default n
-	depends on BUSYBOX_CONFIG_MKSWAP
-	help
-	  Generate swap spaces with universally unique identifiers.
-
-config BUSYBOX_CONFIG_MORE
-	bool "more"
-	default n
-	help
-	  more is a simple utility which allows you to read text one screen
-	  sized page at a time. If you want to read text that is larger than
-	  the screen, and you are using anything faster than a 300 baud modem,
-	  you will probably find this utility very helpful. If you don't have
-	  any need to reading text files, you can leave this disabled.
-
-config BUSYBOX_CONFIG_MOUNT
-	bool "mount"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  All files and filesystems in Unix are arranged into one big directory
-	  tree. The 'mount' utility is used to graft a filesystem onto a
-	  particular part of the tree. A filesystem can either live on a block
-	  device, or it can be accessible over the network, as is the case with
-	  NFS filesystems. Most people using BusyBox will also want to enable
-	  the 'mount' utility.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
-	bool "Support option -f"
-	default n
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable support for faking a file system mount.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
-	bool "Support option -v"
-	default n
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable multi-level -v[vv...] verbose messages. Useful if you
-	  debug mount problems and want to see what is exactly passed
-	  to the kernel.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
-	bool "Support mount helpers"
-	default y
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable mounting of virtual file systems via external helpers.
-	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-	  "obexfs -b00.11.22.33.44.55 /mnt"
-	  Also "mount -t sometype [-o opts] fs /mnt" will try
-	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-	  The idea is to use such virtual filesystems in /etc/fstab.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
-	bool "Support specifying devices by label or UUID"
-	default n
-	depends on BUSYBOX_CONFIG_MOUNT
-	select BUSYBOX_CONFIG_VOLUMEID
-	help
-	  This allows for specifying a device by label or uuid, rather than by
-	  name. This feature utilizes the same functionality as blkid/findfs.
-	  This also enables label or uuid support for swapon.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
-	bool "Support mounting NFS file systems"
-	default n
-	depends on BUSYBOX_CONFIG_MOUNT
-	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  Enable mounting of NFS file systems.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
-	bool "Support mounting CIFS/SMB file systems"
-	default y
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable support for samba mounts.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
-	depends on BUSYBOX_CONFIG_MOUNT
-	bool "Support lots of -o flags in mount"
-	default y
-	help
-	  Without this, mount only supports ro/rw/remount. With this, it
-	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-	  private, unbindable, rshared, rslave, rprivate, and runbindable.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
-	depends on BUSYBOX_CONFIG_MOUNT
-	bool "Support /etc/fstab and -a"
-	default y
-	help
-	  Support mount all and looking for files in /etc/fstab.
-
-config BUSYBOX_CONFIG_PIVOT_ROOT
-	bool "pivot_root"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The pivot_root utility swaps the mount points for the root filesystem
-	  with some other mounted filesystem. This allows you to do all sorts
-	  of wild and crazy things with your Linux system and is far more
-	  powerful than 'chroot'.
-
-	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
-	  in linux 2.6) use switch_root instead.
-
-config BUSYBOX_CONFIG_RDATE
-	bool "rdate"
-	default n
-	help
-	  The rdate utility allows you to synchronize the date and time of your
-	  system clock with the date and time of a remote networked system using
-	  the RFC868 protocol, which is built into the inetd daemon on most
-	  systems.
-
-config BUSYBOX_CONFIG_RDEV
-	bool "rdev"
-	default n
-	help
-	  Print the device node associated with the filesystem mounted at '/'.
-
-config BUSYBOX_CONFIG_READPROFILE
-	bool "readprofile"
-	default n
-	#select PLATFORM_LINUX
-	help
-	  This allows you to parse /proc/profile for basic profiling.
-
-config BUSYBOX_CONFIG_RTCWAKE
-	bool "rtcwake"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Enter a system sleep state until specified wakeup time.
-
-config BUSYBOX_CONFIG_SCRIPT
-	bool "script"
-	default n
-	help
-	  The script makes typescript of terminal session.
-
-config BUSYBOX_CONFIG_SCRIPTREPLAY
-	bool "scriptreplay"
-	default n
-	help
-	  This program replays a typescript, using timing information
-	  given by script -t.
-
-config BUSYBOX_CONFIG_SETARCH
-	bool "setarch"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The linux32 utility is used to create a 32bit environment for the
-	  specified program (usually a shell). It only makes sense to have
-	  this util on a system that supports both 64bit and 32bit userland
-	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
-
-config BUSYBOX_CONFIG_SWAPONOFF
-	bool "swaponoff"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  This option enables both the 'swapon' and the 'swapoff' utilities.
-	  Once you have created some swap space using 'mkswap', you also need
-	  to enable your swap space with the 'swapon' utility. The 'swapoff'
-	  utility is used, typically at system shutdown, to disable any swap
-	  space. If you are not using any swap space, you can leave this
-	  option disabled.
-
-config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
-	bool "Support priority option -p"
-	default n
-	depends on BUSYBOX_CONFIG_SWAPONOFF
-	help
-	  Enable support for setting swap device priority in swapon.
-
-config BUSYBOX_CONFIG_SWITCH_ROOT
-	bool "switch_root"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  The switch_root utility is used from initramfs to select a new
-	  root device. Under initramfs, you have to use this instead of
-	  pivot_root. (Stop reading here if you don't care why.)
-
-	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-	  or unmounted*, pivot_root will not work from initramfs. Instead,
-	  switch_root deletes everything out of rootfs (including itself),
-	  does a mount --move that overmounts rootfs with the new root, and
-	  then execs the specified init program.
-
-	  * Because the Linux kernel uses rootfs internally as the starting
-	  and ending point for searching through the kernel's doubly linked
-	  list of active mount points. That's why.
-
-config BUSYBOX_CONFIG_UMOUNT
-	bool "umount"
-	default y
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  When you want to remove a mounted filesystem from its current mount
-	  point, for example when you are shutting down the system, the
-	  'umount' utility is the tool to use. If you enabled the 'mount'
-	  utility, you almost certainly also want to enable 'umount'.
-
-config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
-	bool "Support option -a"
-	default y
-	depends on BUSYBOX_CONFIG_UMOUNT
-	help
-	  Support -a option to unmount all currently mounted filesystems.
-
-comment "Common options for mount/umount"
-	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
-	bool "Support loopback mounts"
-	default y
-	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
-	help
-	  Enabling this feature allows automatic mounting of files (containing
-	  filesystem images) via the linux kernel's loopback devices.
-	  The mount command will detect you are trying to mount a file instead
-	  of a block device, and transparently associate the file with a
-	  loopback device. The umount command will also free that loopback
-	  device.
-
-	  You can still use the 'losetup' utility (to manually associate files
-	  with loop devices) if you need to do something advanced, such as
-	  specify an offset or cryptographic options to the loopback device.
-	  (If you don't want umount to free the loop device, use "umount -D".)
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
-	bool "Create new loopback devices if needed"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
-	help
-	  Linux kernels >= 2.6.24 support unlimited loopback devices. They are
-	  allocated for use when trying to use a loop device. The loop device
-	  must however exist.
-
-	  This feature lets mount to try to create next /dev/loopN device
-	  if it does not find a free one.
-
-config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
-	bool "Support for the old /etc/mtab file"
-	default n
-	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
-	select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
-	help
-	  Historically, Unix systems kept track of the currently mounted
-	  partitions in the file "/etc/mtab". These days, the kernel exports
-	  the list of currently mounted partitions in "/proc/mounts", rendering
-	  the old mtab file obsolete. (In modern systems, /etc/mtab should be
-	  a symlink to /proc/mounts.)
-
-	  The only reason to have mount maintain an /etc/mtab file itself is if
-	  your stripped-down embedded system does not have a /proc directory.
-	  If you must use this, keep in mind it's inherently brittle (for
-	  example a mount under chroot won't update it), can't handle modern
-	  features like separate per-process filesystem namespaces, requires
-	  that your /etc directory be writable, tends to get easily confused
-	  by --bind or --move mounts, won't update if you rename a directory
-	  that contains a mount point, and so on. (In brief: avoid.)
-
-	  About the only reason to use this is if you've removed /proc from
-	  your kernel.
-
-config BUSYBOX_CONFIG_VOLUMEID
-	bool #No description makes it a hidden option
-	default n
-
-menu "Filesystem/Volume identification"
-	depends on BUSYBOX_CONFIG_VOLUMEID
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
-	bool "Ext filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
-	bool "btrfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
-	bool "Reiser filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
-	bool "fat filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
-	bool "hfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
-	bool "jfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_UFS
-###	bool "ufs filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
-	bool "xfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
-	bool "ntfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
-	bool "iso9660 filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
-	bool "udf filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
-	bool "luks filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
-	bool "linux swap filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_LVM
-###	bool "lvm"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
-	bool "cramfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_HPFS
-###	bool "hpfs filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
-	bool "romfs filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
-	bool "sysv filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_MINIX
-###	bool "minix filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### These only detect partition tables - not used (yet?)
-### config FEATURE_VOLUMEID_MAC
-###	bool "mac filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-###
-### config FEATURE_VOLUMEID_MSDOS
-###	bool "msdos filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
-	bool "ocfs2 filesystem"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_HIGHPOINTRAID
-###	bool "highpoint raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_ISWRAID
-###	bool "intel raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_LSIRAID
-###	bool "lsi raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_VIARAID
-###	bool "via raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_SILICONRAID
-###	bool "silicon raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_NVIDIARAID
-###	bool "nvidia raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_PROMISERAID
-###	bool "promise raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
-	bool "linuxraid"
-	default n
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-endmenu
-
-endmenu