finally move buildroot-ng to trunk

1 files changed, 474 insertions, 0 deletions

diff --git a/package/busybox/config/Config.in b/package/busybox/config/Config.in
new file mode 100644
index 0000000000..6a5d6a74d1
--- /dev/null
+++ b/package/busybox/config/Config.in
@@ -0,0 +1,474 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+
+config BUSYBOX_HAVE_DOT_CONFIG
+	bool
+	default y
+
+menu "Busybox Settings"
+
+menu "General Configuration"
+
+config BUSYBOX_CONFIG_NITPICK
+	bool "See lots more (probably unnecessary) configuration options."
+	default n
+	help
+	  Some BusyBox applets have more configuration options than anyone
+	  will ever care about.  To avoid drowining people in complexity, most
+	  of the applet features that can be set to a sane default value are
+	  hidden, unless you hit the above switch.
+
+	  This is better than to telling people to edit the busybox source
+	  code, but not by much.
+
+	  See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
+
+	  You have been warned.
+
+choice
+	prompt "Buffer allocation policy"
+	default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+	depends on BUSYBOX_CONFIG_NITPICK
+	help
+	  There are 3 ways BusyBox can handle buffer allocations:
+	  - Use malloc. This costs code size for the call to xmalloc.
+	  - Put them on stack. For some very small machines with limited stack
+	    space, this can be deadly.  For most folks, this works just fine.
+	  - Put them in BSS. This works beautifully for computers with a real
+	    MMU (and OS support), but wastes runtime RAM for uCLinux. This
+	    behavior was the only one available for BusyBox versions 0.48 and
+	    earlier.
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC
+	bool "Allocate with Malloc"
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+	bool "Allocate on the Stack"
+
+config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS
+	bool "Allocate in the .bss section"
+
+endchoice
+
+config BUSYBOX_CONFIG_SHOW_USAGE
+	bool "Show terse applet usage messages"
+	default y
+	help
+	  All BusyBox applets will show help messages when invoked with
+	  wrong arguments. You can turn off printing these terse usage
+	  messages if you say no here.
+	  This will save you up to 7k.
+
+config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE
+	bool "Show verbose applet usage messages"
+	default y
+	select BUSYBOX_CONFIG_SHOW_USAGE
+	help
+	  All BusyBox applets will show more verbose help messages when
+	  busybox is invoked with --help.  This will add a lot of text to the
+	  busybox binary.  In the default configuration, this will add about
+	  13k, but it can add much more depending on your configuration.
+
+config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE
+	bool "Store applet usage messages in compressed form"
+	default n
+	depends on BUSYBOX_CONFIG_SHOW_USAGE && BUSYBOX_CONFIG_NITPICK
+	help
+	  Store usage messages in compressed form, uncompress them on-the-fly
+	  when <applet> --help is called.
+
+	  If you have a really tiny busybox with few applets enabled (and
+	  bunzip2 isn't one of them), the overhead of the decompressor might
+	  be noticeable.  Also, if you run executables directly from ROM
+	  and have very little memory, this might not be a win.  Otherwise,
+	  you probably want this.
+
+config BUSYBOX_CONFIG_FEATURE_INSTALLER
+	bool "Support --install [-s] to install applet links at runtime"
+	default n
+	help
+	  Enable 'busybox --install [-s]' support.  This will allow you to use
+	  busybox at runtime to create hard links or symlinks for all the
+	  applets that are compiled into busybox.  This feature requires the
+	  /proc filesystem.
+
+config BUSYBOX_CONFIG_LOCALE_SUPPORT
+	bool "Enable locale support (system needs locale for this to work)"
+	default n
+	help
+	  Enable this if your system has locale support and you would like
+	  busybox to support locale settings.
+
+config BUSYBOX_CONFIG_GETOPT_LONG
+	bool
+	default y
+#	bool "Enable support for --long-options"
+#	default n
+#	help
+#	  Enable this if you want busybox applets to use the gnu --long-option
+#	  style, in addition to single character -a -b -c style options.
+
+config BUSYBOX_CONFIG_FEATURE_DEVPTS
+	bool "Use the devpts filesystem for Unix98 PTYs"
+	default y
+	help
+	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+	  busybox will use /dev/ptmx for the master side of the pseudoterminal
+	  and /dev/pts/<number> for the slave side.  Otherwise, BSD style
+	  /dev/ttyp<number> will be used. To use this option, you should have
+	  devpts mounted.
+
+config BUSYBOX_CONFIG_FEATURE_CLEAN_UP
+	bool "Clean up all memory before exiting (usually not needed)"
+	default n
+	depends on BUSYBOX_CONFIG_NITPICK
+	help
+	  As a size optimization, busybox normally exits without explicitly
+	  freeing dynamically allocated memory or closing files.  This saves
+	  space since the OS will clean up for us, but it can confuse debuggers
+	  like valgrind, which report tons of memory and resource leaks.
+
+	  Don't enable this unless you have a really good reason to clean
+	  things up manually.
+
+config BUSYBOX_CONFIG_FEATURE_SUID
+	bool "Support for SUID/SGID handling"
+	default y
+	help
+	  With this option you can install the busybox binary belonging
+	  to root with the suid bit set, and it'll and it'll automatically drop
+	  priviledges for applets that don't need root access.
+
+	  If you're really paranoid and don't want to do this, build two
+	  busybox binaries with different applets in them (and the appropriate
+	  symlinks pointing to each binary), and only set the suid bit on the
+	  one that needs it.  The applets currently marked to need the suid bit
+	  are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
+	  and vlock.
+
+config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
+	bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
+	default n if BUSYBOX_CONFIG_FEATURE_SUID
+	depends on BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  Allow the SUID / SGID state of an applet to be determined at runtime
+	  by checking /etc/busybox.conf.  (This is sort of a poor man's sudo.)
+	  The format of this file is as follows:
+
+	  <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+
+	  An example might help:
+
+	  [SUID]
+	  su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+	  su = ssx        # exactly the same
+
+	  mount = sx- root.disk # applet mount can be run by root and members of group disk
+	                        # and runs with euid=0
+
+	  cp = --- # disable applet cp for everyone
+
+	  The file has to be owned by user root, group root and has to be
+	  writeable only by root:
+	  	(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+	  The busybox executable has to be owned by user root, group
+	  root and has to be setuid root for this to work:
+	  	(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+	  Robert 'sandman' Griebl has more information here:
+	  <url: http://www.softforge.de/bb/suid.html >.
+
+config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET
+	bool "Suppress warning message if /etc/busybox.conf is not readable"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
+	help
+	  /etc/busybox.conf should be readable by the user needing the SUID, check
+	  this option to avoid users to be notified about missing permissions.
+
+config BUSYBOX_CONFIG_SELINUX
+	bool "Support NSA Security Enhanced Linux"
+	default n
+	help
+	  Enable support for SELinux in applets ls, ps, and id.  Also provide
+	  the option of compiling in SELinux applets.
+
+	  If you do not have a complete SELinux userland installed, this stuff
+	  will not compile. Go visit
+		http://www.nsa.gov/selinux/index.html
+	  to download the necessary stuff to allow busybox to compile with
+	  this option enabled. Specifially, libselinux 1.28 or better is
+	  directly required by busybox. If the installation is located in a
+	  non-standard directory, provide it by invoking make as follows:
+		CFLAGS=-I<libselinux-include-path> \
+		LDFLAGS=-L<libselinux-lib-path> \
+		make
+
+	  Most people will leave this set to 'N'.
+
+config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH
+	string "Path to BusyBox executable"
+	default "/proc/self/exe"
+	help
+	  When Busybox applets need to run other busybox applets, BusyBox
+	  sometimes needs to exec() itself.  When the /proc filesystem is
+	  mounted, /proc/self/exe always points to the currently running
+	  executable.  If you haven't got /proc, set this to wherever you
+	  want to run BusyBox from.
+
+endmenu
+
+menu 'Build Options'
+
+config BUSYBOX_CONFIG_STATIC
+	bool "Build BusyBox as a static binary (no shared libs)"
+	default n
+	help
+	  If you want to build a static BusyBox binary, which does not
+	  use or require any shared libraries, then enable this option.
+	  This can cause BusyBox to be considerably larger, so you should
+	  leave this option false unless you have a good reason (i.e.
+	  your target platform does not support shared libraries, or
+	  you are building an initrd which doesn't need anything but
+	  BusyBox, etc).
+
+	  Most people will leave this set to 'N'.
+
+config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	bool "Build shared libbusybox"
+	default n
+	help
+	  Build a shared library libbusybox.so which contains all
+	  libraries used inside busybox.
+
+	  This is an experimental feature intended to support the upcoming
+	  "make standalone" mode.  Enabling it against the one big busybox
+	  binary serves no purpose (and increases the size).  You should
+	  almost certainly say "no" to this right now.
+
+config BUSYBOX_CONFIG_FEATURE_FULL_LIBBUSYBOX
+	bool "Feature-complete libbusybox"
+	default n if !CONFIG_FEATURE_SHARED_BUSYBOX
+	depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	help
+	  Build a libbusybox with the complete feature-set, disregarding
+	  the actually selected config.
+
+	  Normally, libbusybox will only contain the features which are
+	  used by busybox itself. If you plan to write a separate
+	  standalone application which uses libbusybox say 'Y'.
+
+	  Note: libbusybox is GPL, not LGPL, and exports no stable API that
+	  might act as a copyright barrier.  We can and will modify the
+	  exported function set between releases (even minor version number
+	  changes), and happily break out-of-tree features.
+
+	  Say 'N' if in doubt.
+
+config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX
+	bool "Use shared libbusybox for busybox"
+	default n if BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	depends on !CONFIG_STATIC && BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	help
+	  Use libbusybox.so also for busybox itself.
+	  You need to have a working dynamic linker to use this variant.
+
+config BUSYBOX_CONFIG_LFS
+	bool
+	default y
+	select BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
+	help
+	  If you want to build BusyBox with large file support, then enable
+	  this option.  This will have no effect if your kernel or your C
+	  library lacks large file support for large files.  Some of the
+	  programs that can benefit from large file support include dd, gzip,
+	  cp, mount, tar, and many others.  If you want to access files larger
+	  than 2 Gigabytes, enable this option.  Otherwise, leave it set to 'N'.
+
+config BUSYBOX_USING_CROSS_COMPILER
+	bool
+	default y
+	help
+	  Do you want to build BusyBox with a Cross Compiler?  If so,
+	  then enable this option.  Otherwise leave it set to 'N'.
+
+config BUSYBOX_CROSS_COMPILER_PREFIX
+	string
+	default "mipsel-uclibc-"
+	depends on BUSYBOX_USING_CROSS_COMPILER
+	help
+	  If you want to build BusyBox with a cross compiler, then you
+	  will need to set this to the cross-compiler prefix.  For example,
+	  if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
+	  then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
+	  which will ensure the correct compiler is used.
+
+config BUSYBOX_CONFIG_BUILD_AT_ONCE
+	bool "Compile all sources at once"
+	default n
+	help
+	  Normally each source-file is compiled with one invocation of
+	  the compiler.
+	  If you set this option, all sources are compiled at once.
+	  This gives the compiler more opportunities to optimize which can
+	  result in smaller and/or faster binaries.
+
+	  Setting this option will consume alot of memory, e.g. if you
+	  enable all applets with all features, gcc uses more than 300MB
+	  RAM during compilation of busybox.
+
+	  This option is most likely only beneficial for newer compilers
+	  such as gcc-4.1 and above.
+
+	  Say 'N' unless you know what you are doing.
+
+endmenu
+
+menu 'Debugging Options'
+
+config BUSYBOX_CONFIG_DEBUG
+	bool "Build BusyBox with extra Debugging symbols"
+	default n
+	help
+	  Say Y here if you wish to examine BusyBox internals while applets are
+	  running.  This increases the size of the binary considerably, and
+	  should only be used when doing development.  If you are doing
+	  development and want to debug BusyBox, answer Y.
+
+	  Most people should answer N.
+
+config BUSYBOX_CONFIG_DEBUG_PESSIMIZE
+	bool "Disable compiler optimizations."
+	default n
+	depends on BUSYBOX_CONFIG_DEBUG
+	help
+	  The compiler's optimization of source code can eliminate and reorder
+	  code, resulting in an executable that's hard to understand when
+	  stepping through it with a debugger.  This switches it off, resulting
+	  in a much bigger executable that more closely matches the source
+	  code.
+
+choice
+	prompt "Additional debugging library"
+	default BUSYBOX_CONFIG_NO_DEBUG_LIB
+	depends on BUSYBOX_CONFIG_DEBUG
+	help
+	  Using an additional debugging library will make BusyBox become
+	  considerable larger and will cause it to run more slowly.  You
+	  should always leave this option disabled for production use.
+
+	  dmalloc support:
+	  ----------------
+	  This enables compiling with dmalloc ( http://dmalloc.com/ )
+	  which is an excellent public domain mem leak and malloc problem
+	  detector.  To enable dmalloc, before running busybox you will
+	  want to properly set your environment, for example:
+	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+	  The 'debug=' value is generated using the following command
+	    dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
+	       -p check-fence -p check-heap -p check-lists -p check-blank \
+	       -p check-funcs -p realloc-copy -p allow-free-null
+
+	  Electric-fence support:
+	  -----------------------
+	  This enables compiling with Electric-fence support.  Electric
+	  fence is another very useful malloc debugging library which uses
+	  your computer's virtual memory hardware to detect illegal memory
+	  accesses.  This support will make BusyBox be considerable larger
+	  and run slower, so you should leave this option disabled unless
+	  you are hunting a hard to find memory problem.
+
+
+config BUSYBOX_CONFIG_NO_DEBUG_LIB
+	bool "None"
+
+config BUSYBOX_CONFIG_DMALLOC
+	bool "Dmalloc"
+
+config BUSYBOX_CONFIG_EFENCE
+	bool "Electric-fence"
+
+endchoice
+
+config BUSYBOX_CONFIG_DEBUG_YANK_SUSv2
+	bool "Disable obsolete features removed before SUSv3?"
+	default y
+	help
+	  This option will disable backwards compatibility with SuSv2,
+	  specifically, old-style numeric options ('command -1 <file>')
+	  will not be supported in head, tail, and fold.  (Note: should
+	  yank from renice too.)
+
+endmenu
+
+menu 'Installation Options'
+
+config BUSYBOX_CONFIG_INSTALL_NO_USR
+	bool "Don't use /usr"
+	default n
+	help
+	  Disable use of /usr. Don't activate this option if you don't know
+	  that you really want this behaviour.
+
+choice
+       prompt "Applets links"
+       default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
+       help
+         Choose how you install applets links.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
+       bool "as soft-links"
+       help
+         Install applets as soft-links to the busybox binary. This needs some
+         free inodes on the filesystem, but might help with filesystem
+         generators that can't cope with hard-links.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS
+       bool "as hard-links"
+       help
+         Install applets as hard-links to the busybox binary. This might count
+         on a filesystem with few inodes.
+
+config BUSYBOX_CONFIG_INSTALL_APPLET_DONT
+       bool
+       prompt "not installed"
+       depends on BUSYBOX_CONFIG_FEATURE_INSTALLER || BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
+       help
+         Do not install applets links. Usefull when using the -install feature
+         or a standalone shell for rescue pruposes.
+
+endchoice
+
+config BUSYBOX_PREFIX
+	string
+	default "./_install"
+	help
+	  Define your directory to install BusyBox files/subdirs in.
+
+endmenu
+
+source package/busybox/config/libbb/Config.in
+
+endmenu
+
+comment "Applets"
+
+source package/busybox/config/archival/Config.in
+source package/busybox/config/coreutils/Config.in
+source package/busybox/config/console-tools/Config.in
+source package/busybox/config/debianutils/Config.in
+source package/busybox/config/editors/Config.in
+source package/busybox/config/findutils/Config.in
+source package/busybox/config/init/Config.in
+source package/busybox/config/loginutils/Config.in
+source package/busybox/config/e2fsprogs/Config.in
+source package/busybox/config/modutils/Config.in
+source package/busybox/config/util-linux/Config.in
+source package/busybox/config/miscutils/Config.in
+source package/busybox/config/networking/Config.in
+source package/busybox/config/procps/Config.in
+source package/busybox/config/shell/Config.in
+source package/busybox/config/sysklogd/Config.in