move wlcompat to the broadcom-wl package

SVN-Revision: 9528

11 files changed, 1 insertions, 3905 deletions

diff --git a/package/broadcom-wl/src/wlc/Makefile b/package/broadcom-wl/src/wlc/Makefile
index ffe1649515..5a243f4150 100644
--- a/package/broadcom-wl/src/wlc/Makefile
+++ b/package/broadcom-wl/src/wlc/Makefile
@@ -4,6 +4,6 @@ clean:
 
 wlc: wlc.o ioctl.o
 %.o: %.c
-	$(CC) $(CFLAGS) -Wall -c -o $@ $<
+	$(CC) $(CFLAGS) -I../include -Wall -c -o $@ $<
 
 .PHONY: all clean
diff --git a/package/broadcom-wl/src/wlc/include/bcmdefs.h b/package/broadcom-wl/src/wlc/include/bcmdefs.h
deleted file mode 100644
index 8b5abe5d26..0000000000
--- a/package/broadcom-wl/src/wlc/include/bcmdefs.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Misc system wide definitions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
- */
-
-#ifndef	_bcmdefs_h_
-#define	_bcmdefs_h_
-
-/*
- * One doesn't need to include this file explicitly, gets included automatically if
- * typedefs.h is included.
- */
-
-/* Reclaiming text and data :
- * The following macros specify special linker sections that can be reclaimed
- * after a system is considered 'up'.
- */
-#if defined(__GNUC__) && defined(BCMRECLAIM)
-extern bool	bcmreclaimed;
-#define BCMINITDATA(_data)	__attribute__ ((__section__ (".dataini." #_data))) _data
-#define BCMINITFN(_fn)		__attribute__ ((__section__ (".textini." #_fn))) _fn
-#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-#define BCMINITDATA(_data)	_data
-#define BCMINITFN(_fn)		_fn
-#define bcmreclaimed		0
-#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-
-/* Reclaim uninit functions if BCMNODOWN is defined		*/
-/* and if they are not already removed by -gc-sections	*/
-#ifdef BCMNODOWN
-#define BCMUNINITFN(_fn)		BCMINITFN(_fn)
-#else
-#define BCMUNINITFN(_fn)		_fn
-#endif
-
-#ifdef BCMRECLAIM
-#define CONST
-#else
-#define CONST	const
-#endif /* BCMRECLAIM */
-
-/* Compatibility with old-style BCMRECLAIM */
-#define BCMINIT(_id)		_id
-
-
-/* Put some library data/code into ROM to reduce RAM requirements */
-#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
-#define BCMROMDATA(_data)	__attribute__ ((__section__ (".datarom." #_data))) _data
-#define BCMROMFN(_fn)		__attribute__ ((__section__ (".textrom." #_fn))) _fn
-#else
-#define BCMROMDATA(_data)	_data
-#define BCMROMFN(_fn)		_fn
-#endif
-
-/* Bus types */
-#define	SB_BUS			0	/* Silicon Backplane */
-#define	PCI_BUS			1	/* PCI target */
-#define	PCMCIA_BUS		2	/* PCMCIA target */
-#define SDIO_BUS		3	/* SDIO target */
-#define JTAG_BUS		4	/* JTAG */
-#define NO_BUS			0xFF	/* Bus that does not support R/W REG */
-
-/* Allows optimization for single-bus support */
-#ifdef BCMBUSTYPE
-#define BUSTYPE(bus) (BCMBUSTYPE)
-#else
-#define BUSTYPE(bus) (bus)
-#endif
-
-/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
-#define DMADDR_MASK_32 0x0		/* Address mask for 32-bits */
-#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
-#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-part) */
-
-#define	DMADDRWIDTH_30  30 /* 30-bit addressing capability */
-#define	DMADDRWIDTH_32  32 /* 32-bit addressing capability */
-#define	DMADDRWIDTH_63  63 /* 64-bit addressing capability */
-#define	DMADDRWIDTH_64  64 /* 64-bit addressing capability */
-
-/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
- * By doing, we avoid the need  to allocate an extra buffer for the header when bridging to WL.
- * There is a compile time check in wlc.c which ensure that this value is at least as big
- * as TXOFF. This value is used in dma_rxfill (hnddma.c).
- */
-#define BCMEXTRAHDROOM 160
-
-/* Headroom required for dongle-to-host communication.  Packets allocated
- * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
- * leave this much room in front for low-level message headers which may
- * be needed to get across the dongle bus to the host.  (These messages
- * don't go over the network, so room for the full WL header above would
- * be a waste.)
- */
-#define BCMDONGLEHDRSZ 8
-
-
-
-#endif /* _bcmdefs_h_ */
diff --git a/package/broadcom-wl/src/wlc/include/bcmutils.h b/package/broadcom-wl/src/wlc/include/bcmutils.h
deleted file mode 100644
index b6e7b0542b..0000000000
--- a/package/broadcom-wl/src/wlc/include/bcmutils.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Misc useful os-independent macros and functions.
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
- */
-
-#ifndef	_bcmutils_h_
-#define	_bcmutils_h_
-
-/* ** driver/apps-shared section ** */
-
-#define BCME_STRLEN 		64	/* Max string length for BCM errors */
-#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))
-
-
-/*
- * error codes could be added but the defined ones shouldn't be changed/deleted
- * these error codes are exposed to the user code
- * when ever a new error code is added to this list
- * please update errorstring table with the related error string and
- * update osl files with os specific errorcode map
-*/
-
-#define BCME_OK				0	/* Success */
-#define BCME_ERROR			-1	/* Error generic */
-#define BCME_BADARG			-2	/* Bad Argument */
-#define BCME_BADOPTION			-3	/* Bad option */
-#define BCME_NOTUP			-4	/* Not up */
-#define BCME_NOTDOWN			-5	/* Not down */
-#define BCME_NOTAP			-6	/* Not AP */
-#define BCME_NOTSTA			-7	/* Not STA  */
-#define BCME_BADKEYIDX			-8	/* BAD Key Index */
-#define BCME_RADIOOFF 			-9	/* Radio Off */
-#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
-#define BCME_NOCLK			-11	/* No Clock */
-#define BCME_BADRATESET			-12	/* BAD Rate valueset */
-#define BCME_BADBAND			-13	/* BAD Band */
-#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
-#define BCME_BUFTOOLONG			-15	/* Buffer too long */
-#define BCME_BUSY			-16	/* Busy */
-#define BCME_NOTASSOCIATED		-17	/* Not Associated */
-#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
-#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
-#define BCME_BADCHAN			-20	/* Bad Channel */
-#define BCME_BADADDR			-21	/* Bad Address */
-#define BCME_NORESOURCE			-22	/* Not Enough Resources */
-#define BCME_UNSUPPORTED		-23	/* Unsupported */
-#define BCME_BADLEN			-24	/* Bad length */
-#define BCME_NOTREADY			-25	/* Not Ready */
-#define BCME_EPERM			-26	/* Not Permitted */
-#define BCME_NOMEM			-27	/* No Memory */
-#define BCME_ASSOCIATED			-28	/* Associated */
-#define BCME_RANGE			-29	/* Not In Range */
-#define BCME_NOTFOUND			-30	/* Not Found */
-#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
-#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
-#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
-#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
-#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
-#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
-#define BCME_LAST			BCME_DONGLE_DOWN
-
-/* These are collection of BCME Error strings */
-#define BCMERRSTRINGTABLE {		\
-	"OK",				\
-	"Undefined error",		\
-	"Bad Argument",			\
-	"Bad Option",			\
-	"Not up",			\
-	"Not down",			\
-	"Not AP",			\
-	"Not STA",			\
-	"Bad Key Index",		\
-	"Radio Off",			\
-	"Not band locked",		\
-	"No clock",			\
-	"Bad Rate valueset",		\
-	"Bad Band",			\
-	"Buffer too short",		\
-	"Buffer too long",		\
-	"Busy",				\
-	"Not Associated",		\
-	"Bad SSID len",			\
-	"Out of Range Channel",		\
-	"Bad Channel",			\
-	"Bad Address",			\
-	"Not Enough Resources",		\
-	"Unsupported",			\
-	"Bad length",			\
-	"Not Ready",			\
-	"Not Permitted",		\
-	"No Memory",			\
-	"Associated",			\
-	"Not In Range",			\
-	"Not Found",			\
-	"WME Not Enabled",		\
-	"TSPEC Not Found",		\
-	"ACM Not Supported",		\
-	"Not WME Association",		\
-	"SDIO Bus Error",		\
-	"Dongle Not Accessible"		\
-}
-
-#ifndef ABS
-#define	ABS(a)			(((a) < 0)?-(a):(a))
-#endif /* ABS */
-
-#ifndef MIN
-#define	MIN(a, b)		(((a) < (b))?(a):(b))
-#endif /* MIN */
-
-#ifndef MAX
-#define	MAX(a, b)		(((a) > (b))?(a):(b))
-#endif /* MAX */
-
-#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
-#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
-#define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
-#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
-#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
-#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
-
-/* bit map related macros */
-#ifndef setbit
-#ifndef NBBY		    /* the BSD family defines NBBY */
-#define	NBBY	8	/* 8 bits per byte */
-#endif /* #ifndef NBBY */
-#define	setbit(a, i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define	clrbit(a, i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define	isset(a, i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define	isclr(a, i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif /* setbit */
-
-#define	NBITS(type)	(sizeof(type) * 8)
-#define NBITVAL(nbits)	(1 << (nbits))
-#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
-#define	NBITMASK(nbits)	MAXBITVAL(nbits)
-#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)
-
-/* basic mux operation - can be optimized on several architectures */
-#define MUX(pred, true, false) ((pred) ? (true) : (false))
-
-/* modulo inc/dec - assumes x E [0, bound - 1] */
-#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
-#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
-
-/* modulo inc/dec, bound = 2^k */
-#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
-#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
-
-/* modulo add/sub - assumes x, y E [0, bound - 1] */
-#define MODADD(x, y, bound) \
-    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
-#define MODSUB(x, y, bound) \
-    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
-
-/* module add/sub, bound = 2^k */
-#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
-#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
-
-/* crc defines */
-#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
-#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */
-
-/* bcm_format_flags() bit description structure */
-typedef struct bcm_bit_desc {
-	uint32	bit;
-	char*	name;
-} bcm_bit_desc_t;
-
-/* tag_ID/length/value_buffer tuple */
-typedef struct bcm_tlv {
-	uint8	id;
-	uint8	len;
-	uint8	data[1];
-} bcm_tlv_t;
-
-/* Check that bcm_tlv_t fits into the given buflen */
-#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
-
-/* buffer length for ethernet address from bcm_ether_ntoa() */
-#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */
-
-/* unaligned load and store macros */
-#ifdef IL_BIGENDIAN
-static INLINE uint32
-load32_ua(uint8 *a)
-{
-	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
-	a[0] = (v >> 24) & 0xff;
-	a[1] = (v >> 16) & 0xff;
-	a[2] = (v >> 8) & 0xff;
-	a[3] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
-	return ((a[0] << 8) | a[1]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
-	a[0] = (v >> 8) & 0xff;
-	a[1] = v & 0xff;
-}
-
-#else
-
-static INLINE uint32
-load32_ua(uint8 *a)
-{
-	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
-	a[3] = (v >> 24) & 0xff;
-	a[2] = (v >> 16) & 0xff;
-	a[1] = (v >> 8) & 0xff;
-	a[0] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
-	return ((a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
-	a[1] = (v >> 8) & 0xff;
-	a[0] = v & 0xff;
-}
-
-#endif /* IL_BIGENDIAN */
-
-#endif	/* _bcmutils_h_ */
diff --git a/package/broadcom-wl/src/wlc/include/proto/802.11.h b/package/broadcom-wl/src/wlc/include/proto/802.11.h
deleted file mode 100644
index 2b1c4ee111..0000000000
--- a/package/broadcom-wl/src/wlc/include/proto/802.11.h
+++ /dev/null
@@ -1,1258 +0,0 @@
-/*
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Fundamental types and constants relating to 802.11
- *
- * $Id: 802.11.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $
- */
-
-#ifndef _802_11_H_
-#define _802_11_H_
-
-#ifndef _TYPEDEFS_H_
-#include <typedefs.h>
-#endif
-
-#ifndef _NET_ETHERNET_H_
-#include <proto/ethernet.h>
-#endif
-
-#include <proto/wpa.h>
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif
-
-#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
-
-/* Generic 802.11 frame constants */
-#define DOT11_A3_HDR_LEN		24	/* d11 header length with A3 */
-#define DOT11_A4_HDR_LEN		30	/* d11 header length with A4 */
-#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN	/* MAC header length */
-#define DOT11_FCS_LEN			4	/* d11 FCS length */
-#define DOT11_ICV_LEN			4	/* d11 ICV length */
-#define DOT11_ICV_AES_LEN		8	/* d11 ICV/AES length */
-#define DOT11_QOS_LEN			2	/* d11 QoS length */
-#define DOT11_HTC_LEN			4	/* d11 HT Control field length */
-
-#define DOT11_KEY_INDEX_SHIFT		6	/* d11 key index shift */
-#define DOT11_IV_LEN			4	/* d11 IV length */
-#define DOT11_IV_TKIP_LEN		8	/* d11 IV TKIP length */
-#define DOT11_IV_AES_OCB_LEN		4	/* d11 IV/AES/OCB length */
-#define DOT11_IV_AES_CCM_LEN		8	/* d11 IV/AES/CCM length */
-#define DOT11_IV_MAX_LEN		8	/* maximum iv len for any encryption */
-
-/* Includes MIC */
-#define DOT11_MAX_MPDU_BODY_LEN		2304	/* max MPDU body length */
-/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
-#define DOT11_MAX_MPDU_LEN		(DOT11_A4_HDR_LEN + \
-					 DOT11_QOS_LEN + \
-					 DOT11_IV_AES_CCM_LEN + \
-					 DOT11_MAX_MPDU_BODY_LEN + \
-					 DOT11_ICV_LEN + \
-					 DOT11_FCS_LEN)	/* d11 max MPDU length */
-
-#define DOT11_MAX_SSID_LEN		32	/* d11 max ssid length */
-
-/* dot11RTSThreshold */
-#define DOT11_DEFAULT_RTS_LEN		2347	/* d11 default RTS length */
-#define DOT11_MAX_RTS_LEN		2347	/* d11 max RTS length */
-
-/* dot11FragmentationThreshold */
-#define DOT11_MIN_FRAG_LEN		256	/* d11 min fragmentation length */
-#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength
-						* of the attached PHY
-						*/
-#define DOT11_DEFAULT_FRAG_LEN		2346	/* d11 default fragmentation length */
-
-/* dot11BeaconPeriod */
-#define DOT11_MIN_BEACON_PERIOD		1	/* d11 min beacon period */
-#define DOT11_MAX_BEACON_PERIOD		0xFFFF	/* d11 max beacon period */
-
-/* dot11DTIMPeriod */
-#define DOT11_MIN_DTIM_PERIOD		1	/* d11 min DTIM period */
-#define DOT11_MAX_DTIM_PERIOD		0xFF	/* d11 max DTIM period */
-
-/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
-#define DOT11_LLC_SNAP_HDR_LEN		8	/* d11 LLC/SNAP header length */
-#define DOT11_OUI_LEN			3	/* d11 OUI length */
-struct dot11_llc_snap_header {
-	uint8	dsap;				/* always 0xAA */
-	uint8	ssap;				/* always 0xAA */
-	uint8	ctl;				/* always 0x03 */
-	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
-						 * Bridge-Tunnel: 0x00 0x00 0xF8
-						 */
-	uint16	type;				/* ethertype */
-} PACKED;
-
-/* RFC1042 header used by 802.11 per 802.1H */
-#define RFC1042_HDR_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)	/* RCF1042 header length */
-
-/* Generic 802.11 MAC header */
-/*
- * N.B.: This struct reflects the full 4 address 802.11 MAC header.
- *		 The fields are defined such that the shorter 1, 2, and 3
- *		 address headers just use the first k fields.
- */
-struct dot11_header {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	a1;		/* address 1 */
-	struct ether_addr	a2;		/* address 2 */
-	struct ether_addr	a3;		/* address 3 */
-	uint16			seq;		/* sequence control */
-	struct ether_addr	a4;		/* address 4 */
-} PACKED;
-
-/* Control frames */
-
-struct dot11_rts_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	ta;		/* transmitter address */
-} PACKED;
-#define	DOT11_RTS_LEN		16		/* d11 RTS frame length */
-
-struct dot11_cts_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-} PACKED;
-#define	DOT11_CTS_LEN		10		/* d11 CTS frame length */
-
-struct dot11_ack_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-} PACKED;
-#define	DOT11_ACK_LEN		10		/* d11 ACK frame length */
-
-struct dot11_ps_poll_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* AID */
-	struct ether_addr	bssid;		/* receiver address, STA in AP */
-	struct ether_addr	ta;		/* transmitter address */
-} PACKED;
-#define	DOT11_PS_POLL_LEN	16		/* d11 PS poll frame length */
-
-struct dot11_cf_end_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	bssid;		/* transmitter address, STA in AP */
-} PACKED;
-#define	DOT11_CS_END_LEN	16		/* d11 CF-END frame length */
-
-/* BA/BAR Control parameters */
-#define DOT11_BA_CTL_POLICY_NORMAL	0x0000	/* normal ack */
-#define DOT11_BA_CTL_POLICY_NOACK	0x0001	/* no ack */
-#define DOT11_BA_CTL_POLICY_MASK	0x0001	/* ack policy mask */
-
-#define DOT11_BA_CTL_MTID		0x0002	/* multi tid BA */
-#define DOT11_BA_CTL_COMPRESSED		0x0004	/* compressed bitmap */
-
-#define DOT11_BA_CTL_NUMMSDU_MASK	0x0FC0	/* num msdu in bitmap mask */
-#define DOT11_BA_CTL_NUMMSDU_SHIFT	6	/* num msdu in bitmap shift */
-
-#define DOT11_BA_CTL_TID_MASK		0xF000	/* tid mask */
-#define DOT11_BA_CTL_TID_SHIFT		12	/* tid shift */
-
-struct dot11_ba_req_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	ta;		/* transmitter address */
-	uint16			bar_control;	/* BAR Control */
-	uint16			seqnum;		/* Starting Sequence control */
-} PACKED;
-#define DOT11_BA_REQ_LEN	20		/* BAR frame length */
-
-#define DOT11_BA_BITMAP_LEN	128		/* bitmap length */
-#define DOT11_BA_CMP_BITMAP_LEN	8		/* compressed bitmap length */
-struct dot11_ba_frame {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	ra;		/* receiver address */
-	struct ether_addr	ta;		/* transmitter address */
-	uint16			ba_control;	/* BA Control */
-	uint16			seqnum;		/* Starting Sequence control */
-	uint8			bitmap[DOT11_BA_BITMAP_LEN];	/* Block Ack Bitmap */
-} PACKED;
-#define DOT11_BA_LEN		20		/* BA frame length (without bitmap) */
-
-/* Management frame header */
-struct dot11_management_header {
-	uint16			fc;		/* frame control */
-	uint16			durid;		/* duration/ID */
-	struct ether_addr	da;		/* receiver address */
-	struct ether_addr	sa;		/* transmitter address */
-	struct ether_addr	bssid;		/* BSS ID */
-	uint16			seq;		/* sequence control */
-} PACKED;
-#define	DOT11_MGMT_HDR_LEN	24		/* d11 management header length */
-
-/* Management frame payloads */
-
-struct dot11_bcn_prb {
-	uint32			timestamp[2];
-	uint16			beacon_interval;
-	uint16			capability;
-} PACKED;
-#define	DOT11_BCN_PRB_LEN	12		/* d11 beacon probe frame length */
-
-struct dot11_auth {
-	uint16			alg;		/* algorithm */
-	uint16			seq;		/* sequence control */
-	uint16			status;		/* status code */
-} PACKED;
-#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info
-						 * elt
-						 */
-
-struct dot11_assoc_req {
-	uint16			capability;	/* capability information */
-	uint16			listen;		/* listen interval */
-} PACKED;
-#define DOT11_ASSOC_REQ_FIXED_LEN	4	/* length of assoc frame without info elts */
-
-struct dot11_reassoc_req {
-	uint16			capability;	/* capability information */
-	uint16			listen;		/* listen interval */
-	struct ether_addr	ap;		/* Current AP address */
-} PACKED;
-#define DOT11_REASSOC_REQ_FIXED_LEN	10	/* length of assoc frame without info elts */
-
-struct dot11_assoc_resp {
-	uint16			capability;	/* capability information */
-	uint16			status;		/* status code */
-	uint16			aid;		/* association ID */
-} PACKED;
-
-struct dot11_action_measure {
-	uint8	category;
-	uint8	action;
-	uint8	token;
-	uint8	data[1];
-} PACKED;
-#define DOT11_ACTION_MEASURE_LEN	3	/* d11 action measurement header length */
-
-struct dot11_action_switch_channel {
-	uint8	category;
-	uint8	action;
-	uint8	data[5]; /* for switch IE */
-} PACKED;
-
-struct dot11_action_ht_ch_width {
-	uint8	category;
-	uint8	action;
-	uint8	ch_width;
-} PACKED;
-
-struct dot11_action_ht_mimops {
-	uint8	category;
-	uint8	action;
-	uint8	enable;
-	uint8	psmode;
-} PACKED;
-
-/* ************* 802.11h related definitions. ************* */
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 power;
-} dot11_power_cnst_t;
-
-typedef struct {
-	uint8 min;
-	uint8 max;
-} dot11_power_cap_t;
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 tx_pwr;
-	uint8 margin;
-} dot11_tpc_rep_t;
-#define DOT11_MNG_IE_TPC_REPORT_LEN	2 	/* length of IE data, not including 2 byte header */
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 first_channel;
-	uint8 num_channels;
-} dot11_supp_channels_t;
-
-/* channel switch announcement (CSA) mode type - 802.11h-2003 $7.3.2.20 */
-#define DOT11_CSA_MODE_ADVISORY		0	/* no DOT11_CSA_MODE_NO_TX restriction imposed */
-#define DOT11_CSA_MODE_NO_TX		1	/* no transmission upon receiving CSA frame. */
-
-/* CSA IE data structure */
-struct dot11_channel_switch {
-	uint8 id;
-	uint8 len;
-	uint8 mode;
-	uint8 channel;
-	uint8 count;
-}  PACKED;
-typedef struct dot11_channel_switch dot11_channel_switch_t;
-
-#define DOT11_SWITCH_IE_LEN	3	/* length of IE data, not including 2 byte header */
-
-/* 802.11h Measurement Request/Report IEs */
-/* Measurement Type field */
-#define DOT11_MEASURE_TYPE_BASIC 	0	/* d11 measurement basic type */
-#define DOT11_MEASURE_TYPE_CCA 		1	/* d11 measurement CCA type */
-#define DOT11_MEASURE_TYPE_RPI		2	/* d11 measurement PRI type */
-
-/* Measurement Mode field */
-
-/* Measurement Request Modes */
-#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)	/* d11 measurement enable */
-#define DOT11_MEASURE_MODE_REQUEST	(1<<2)	/* d11 measurement request */
-#define DOT11_MEASURE_MODE_REPORT 	(1<<3)	/* d11 measurement report */
-/* Measurement Report Modes */
-#define DOT11_MEASURE_MODE_LATE 	(1<<0)	/* d11 measurement late */
-#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)	/* d11 measurement incapable */
-#define DOT11_MEASURE_MODE_REFUSED	(1<<2)	/* d11 measurement refuse */
-/* Basic Measurement Map bits */
-#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))	/* d11 measurement basic map BSS */
-#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))	/* d11 measurement map OFDM */
-#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))	/* d11 measurement map unknown */
-#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))	/* d11 measurement map radar */
-#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))	/* d11 measurement map unmeasuremnt */
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 token;
-	uint8 mode;
-	uint8 type;
-	uint8 channel;
-	uint8 start_time[8];
-	uint16 duration;
-} dot11_meas_req_t;
-#define DOT11_MNG_IE_MREQ_LEN 14	/* d11 measurement request IE length */
-/* length of Measure Request IE data not including variable len */
-#define DOT11_MNG_IE_MREQ_FIXED_LEN 3	/* d11 measurement request IE fixed length */
-
-struct dot11_meas_rep {
-	uint8 id;
-	uint8 len;
-	uint8 token;
-	uint8 mode;
-	uint8 type;
-	union
-	{
-		struct {
-			uint8 channel;
-			uint8 start_time[8];
-			uint16 duration;
-			uint8 map;
-		} PACKED basic;
-		uint8 data[1];
-	} PACKED rep;
-} PACKED;
-typedef struct dot11_meas_rep dot11_meas_rep_t;
-
-/* length of Measure Report IE data not including variable len */
-#define DOT11_MNG_IE_MREP_FIXED_LEN	3	/* d11 measurement response IE fixed length */
-
-struct dot11_meas_rep_basic {
-	uint8 channel;
-	uint8 start_time[8];
-	uint16 duration;
-	uint8 map;
-} PACKED;
-typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
-#define DOT11_MEASURE_BASIC_REP_LEN	12	/* d11 measurement basic report length */
-
-struct dot11_quiet {
-	uint8 id;
-	uint8 len;
-	uint8 count;	/* TBTTs until beacon interval in quiet starts */
-	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
-	uint16 duration;	/* Length of quiet period, in TU's */
-	uint16 offset;	/* TU's offset from TBTT in Count field */
-} PACKED;
-typedef struct dot11_quiet dot11_quiet_t;
-
-typedef struct {
-	uint8 channel;
-	uint8 map;
-} chan_map_tuple_t;
-
-typedef struct {
-	uint8 id;
-	uint8 len;
-	uint8 eaddr[ETHER_ADDR_LEN];
-	uint8 interval;
-	chan_map_tuple_t map[1];
-} dot11_ibss_dfs_t;
-
-/* WME Elements */
-#define WME_OUI			"\x00\x50\xf2"	/* WME OUI */
-#define WME_VER			1	/* WME version */
-#define WME_TYPE		2	/* WME type */
-#define WME_SUBTYPE_IE		0	/* Information Element */
-#define WME_SUBTYPE_PARAM_IE	1	/* Parameter Element */
-#define WME_SUBTYPE_TSPEC	2	/* Traffic Specification */
-
-/* WME Access Category Indices (ACIs) */
-#define AC_BE			0	/* Best Effort */
-#define AC_BK			1	/* Background */
-#define AC_VI			2	/* Video */
-#define AC_VO			3	/* Voice */
-#define AC_COUNT		4	/* number of ACs */
-
-typedef uint8 ac_bitmap_t;	/* AC bitmap of (1 << AC_xx) */
-
-#define AC_BITMAP_NONE		0x0	/* No ACs */
-#define AC_BITMAP_ALL		0xf	/* All ACs */
-#define AC_BITMAP_TST(ab, ac)	(((ab) & (1 << (ac))) != 0)
-
-/* WME Information Element (IE) */
-struct wme_ie {
-	uint8 oui[3];
-	uint8 type;
-	uint8 subtype;
-	uint8 version;
-	uint8 qosinfo;
-} PACKED;
-typedef struct wme_ie wme_ie_t;
-#define WME_IE_LEN 7	/* WME IE length */
-
-struct edcf_acparam {
-	uint8	ACI;
-	uint8	ECW;
-	uint16  TXOP;		/* stored in network order (ls octet first) */
-} PACKED;
-typedef struct edcf_acparam edcf_acparam_t;
-
-/* WME Parameter Element (PE) */
-struct wme_param_ie {
-	uint8 oui[3];
-	uint8 type;
-	uint8 subtype;
-	uint8 version;
-	uint8 qosinfo;
-	uint8 rsvd;
-	edcf_acparam_t acparam[AC_COUNT];
-} PACKED;
-typedef struct wme_param_ie wme_param_ie_t;
-#define WME_PARAM_IE_LEN            24          /* WME Parameter IE length */
-
-/* QoS Info field for IE as sent from AP */
-#define WME_QI_AP_APSD_MASK         0x80        /* U-APSD Supported mask */
-#define WME_QI_AP_APSD_SHIFT        7           /* U-APSD Supported shift */
-#define WME_QI_AP_COUNT_MASK        0x0f        /* Parameter set count mask */
-#define WME_QI_AP_COUNT_SHIFT       0           /* Parameter set count shift */
-
-/* QoS Info field for IE as sent from STA */
-#define WME_QI_STA_MAXSPLEN_MASK    0x60        /* Max Service Period Length mask */
-#define WME_QI_STA_MAXSPLEN_SHIFT   5           /* Max Service Period Length shift */
-#define WME_QI_STA_APSD_ALL_MASK    0xf         /* APSD all AC bits mask */
-#define WME_QI_STA_APSD_ALL_SHIFT   0           /* APSD all AC bits shift */
-#define WME_QI_STA_APSD_BE_MASK     0x8         /* APSD AC_BE mask */
-#define WME_QI_STA_APSD_BE_SHIFT    3           /* APSD AC_BE shift */
-#define WME_QI_STA_APSD_BK_MASK     0x4         /* APSD AC_BK mask */
-#define WME_QI_STA_APSD_BK_SHIFT    2           /* APSD AC_BK shift */
-#define WME_QI_STA_APSD_VI_MASK     0x2         /* APSD AC_VI mask */
-#define WME_QI_STA_APSD_VI_SHIFT    1           /* APSD AC_VI shift */
-#define WME_QI_STA_APSD_VO_MASK     0x1         /* APSD AC_VO mask */
-#define WME_QI_STA_APSD_VO_SHIFT    0           /* APSD AC_VO shift */
-
-/* ACI */
-#define EDCF_AIFSN_MIN               1           /* AIFSN minimum value */
-#define EDCF_AIFSN_MAX               15          /* AIFSN maximum value */
-#define EDCF_AIFSN_MASK              0x0f        /* AIFSN mask */
-#define EDCF_ACM_MASK                0x10        /* ACM mask */
-#define EDCF_ACI_MASK                0x60        /* ACI mask */
-#define EDCF_ACI_SHIFT               5           /* ACI shift */
-
-/* ECW */
-#define EDCF_ECW_MIN                 0           /* cwmin/cwmax exponent minimum value */
-#define EDCF_ECW_MAX                 15          /* cwmin/cwmax exponent maximum value */
-#define EDCF_ECW2CW(exp)             ((1 << (exp)) - 1)
-#define EDCF_ECWMIN_MASK             0x0f        /* cwmin exponent form mask */
-#define EDCF_ECWMAX_MASK             0xf0        /* cwmax exponent form mask */
-#define EDCF_ECWMAX_SHIFT            4           /* cwmax exponent form shift */
-
-/* TXOP */
-#define EDCF_TXOP_MIN                0           /* TXOP minimum value */
-#define EDCF_TXOP_MAX                65535       /* TXOP maximum value */
-#define EDCF_TXOP2USEC(txop)         ((txop) << 5)
-
-/* Default EDCF parameters that AP advertises for STA to use; WMM draft Table 12 */
-#define EDCF_AC_BE_ACI_STA           0x03	/* STA ACI value for best effort AC */
-#define EDCF_AC_BE_ECW_STA           0xA4	/* STA ECW value for best effort AC */
-#define EDCF_AC_BE_TXOP_STA          0x0000	/* STA TXOP value for best effort AC */
-#define EDCF_AC_BK_ACI_STA           0x27	/* STA ACI value for background AC */
-#define EDCF_AC_BK_ECW_STA           0xA4	/* STA ECW value for background AC */
-#define EDCF_AC_BK_TXOP_STA          0x0000	/* STA TXOP value for background AC */
-#define EDCF_AC_VI_ACI_STA           0x42	/* STA ACI value for video AC */
-#define EDCF_AC_VI_ECW_STA           0x43	/* STA ECW value for video AC */
-#define EDCF_AC_VI_TXOP_STA          0x005e	/* STA TXOP value for video AC */
-#define EDCF_AC_VO_ACI_STA           0x62	/* STA ACI value for audio AC */
-#define EDCF_AC_VO_ECW_STA           0x32	/* STA ECW value for audio AC */
-#define EDCF_AC_VO_TXOP_STA          0x002f	/* STA TXOP value for audio AC */
-
-/* Default EDCF parameters that AP uses; WMM draft Table 14 */
-#define EDCF_AC_BE_ACI_AP            0x03	/* AP ACI value for best effort AC */
-#define EDCF_AC_BE_ECW_AP            0x64	/* AP ECW value for best effort AC */
-#define EDCF_AC_BE_TXOP_AP           0x0000	/* AP TXOP value for best effort AC */
-#define EDCF_AC_BK_ACI_AP            0x27	/* AP ACI value for background AC */
-#define EDCF_AC_BK_ECW_AP            0xA4	/* AP ECW value for background AC */
-#define EDCF_AC_BK_TXOP_AP           0x0000	/* AP TXOP value for background AC */
-#define EDCF_AC_VI_ACI_AP            0x41	/* AP ACI value for video AC */
-#define EDCF_AC_VI_ECW_AP            0x43	/* AP ECW value for video AC */
-#define EDCF_AC_VI_TXOP_AP           0x005e	/* AP TXOP value for video AC */
-#define EDCF_AC_VO_ACI_AP            0x61	/* AP ACI value for audio AC */
-#define EDCF_AC_VO_ECW_AP            0x32	/* AP ECW value for audio AC */
-#define EDCF_AC_VO_TXOP_AP           0x002f	/* AP TXOP value for audio AC */
-
-struct dot11_qbss_load_ie {
-	uint8 id; 			/* 11, DOT11_MNG_QBSS_LOAD_ID */
-	uint8 length;
-	uint16 station_count; 		/* total number of STAs associated */
-	uint8 channel_utilization;	/* % of time, normalized to 255, QAP sensed medium busy */
-	uint16 aac; 			/* available admission capacity */
-} PACKED;
-typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t;
-
-/* nom_msdu_size */
-#define FIXED_MSDU_SIZE 0x8000		/* MSDU size is fixed */
-#define MSDU_SIZE_MASK	0x7fff		/* (Nominal or fixed) MSDU size */
-
-/* surplus_bandwidth */
-/* Represented as 3 bits of integer, binary point, 13 bits fraction */
-#define	INTEGER_SHIFT	13	/* integer shift */
-#define FRACTION_MASK	0x1FFF	/* fraction mask */
-
-/* Management Notification Frame */
-struct dot11_management_notification {
-	uint8 category;			/* DOT11_ACTION_NOTIFICATION */
-	uint8 action;
-	uint8 token;
-	uint8 status;
-	uint8 data[1];			/* Elements */
-} PACKED;
-#define DOT11_MGMT_NOTIFICATION_LEN 4	/* Fixed length */
-
-/* WME Action Codes */
-#define WME_ADDTS_REQUEST	0	/* WME ADDTS request */
-#define WME_ADDTS_RESPONSE	1	/* WME ADDTS response */
-#define WME_DELTS_REQUEST	2	/* WME DELTS request */
-
-/* WME Setup Response Status Codes */
-#define WME_ADMISSION_ACCEPTED	0	/* WME admission accepted */
-#define WME_INVALID_PARAMETERS	1	/* WME invalide parameters */
-#define WME_ADMISSION_REFUSED	3	/* WME admission refused */
-
-/* Macro to take a pointer to a beacon or probe response
- * header and return the char* pointer to the SSID info element
- */
-#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
-
-/* Authentication frame payload constants */
-#define DOT11_OPEN_SYSTEM	0	/* d11 open authentication */
-#define DOT11_SHARED_KEY	1	/* d11 shared authentication */
-#define DOT11_CHALLENGE_LEN	128	/* d11 chanllenge text length */
-
-/* Frame control macros */
-#define FC_PVER_MASK		0x3	/* PVER mask */
-#define FC_PVER_SHIFT		0	/* PVER shift */
-#define FC_TYPE_MASK		0xC	/* type mask */
-#define FC_TYPE_SHIFT		2	/* type shift */
-#define FC_SUBTYPE_MASK		0xF0	/* subtype mask */
-#define FC_SUBTYPE_SHIFT	4	/* subtype shift */
-#define FC_TODS			0x100	/* to DS */
-#define FC_TODS_SHIFT		8	/* to DS shift */
-#define FC_FROMDS		0x200	/* from DS */
-#define FC_FROMDS_SHIFT		9	/* from DS shift */
-#define FC_MOREFRAG		0x400	/* more frag. */
-#define FC_MOREFRAG_SHIFT	10	/* more frag. shift */
-#define FC_RETRY		0x800	/* retry */
-#define FC_RETRY_SHIFT		11	/* retry shift */
-#define FC_PM			0x1000	/* PM */
-#define FC_PM_SHIFT		12	/* PM shift */
-#define FC_MOREDATA		0x2000	/* more data */
-#define FC_MOREDATA_SHIFT	13	/* more data shift */
-#define FC_WEP			0x4000	/* WEP */
-#define FC_WEP_SHIFT		14	/* WEP shift */
-#define FC_ORDER		0x8000	/* order */
-#define FC_ORDER_SHIFT		15	/* order shift */
-
-/* sequence control macros */
-#define SEQNUM_SHIFT		4	/* seq. number shift */
-#define SEQNUM_MAX		0x1000	/* max seqnum + 1 */
-#define FRAGNUM_MASK		0xF	/* frag. number mask */
-
-/* Frame Control type/subtype defs */
-
-/* FC Types */
-#define FC_TYPE_MNG		0	/* management type */
-#define FC_TYPE_CTL		1	/* control type */
-#define FC_TYPE_DATA		2	/* data type */
-
-/* Management Subtypes */
-#define FC_SUBTYPE_ASSOC_REQ		0	/* assoc. request */
-#define FC_SUBTYPE_ASSOC_RESP		1	/* assoc. response */
-#define FC_SUBTYPE_REASSOC_REQ		2	/* reassoc. request */
-#define FC_SUBTYPE_REASSOC_RESP		3	/* reassoc. response */
-#define FC_SUBTYPE_PROBE_REQ		4	/* probe request */
-#define FC_SUBTYPE_PROBE_RESP		5	/* probe response */
-#define FC_SUBTYPE_BEACON		8	/* beacon */
-#define FC_SUBTYPE_ATIM			9	/* ATIM */
-#define FC_SUBTYPE_DISASSOC		10	/* disassoc. */
-#define FC_SUBTYPE_AUTH			11	/* authentication */
-#define FC_SUBTYPE_DEAUTH		12	/* de-authentication */
-#define FC_SUBTYPE_ACTION		13	/* action */
-
-/* Control Subtypes */
-#define FC_SUBTYPE_BLOCKACK_REQ		8	/* Block Ack Req */
-#define FC_SUBTYPE_BLOCKACK		9	/* Block Ack */
-#define FC_SUBTYPE_PS_POLL		10	/* PS poll */
-#define FC_SUBTYPE_RTS			11	/* RTS */
-#define FC_SUBTYPE_CTS			12	/* CTS */
-#define FC_SUBTYPE_ACK			13	/* ACK */
-#define FC_SUBTYPE_CF_END		14	/* CF-END */
-#define FC_SUBTYPE_CF_END_ACK		15	/* CF-END ACK */
-
-/* Data Subtypes */
-#define FC_SUBTYPE_DATA			0	/* Data */
-#define FC_SUBTYPE_DATA_CF_ACK		1	/* Data + CF-ACK */
-#define FC_SUBTYPE_DATA_CF_POLL		2	/* Data + CF-Poll */
-#define FC_SUBTYPE_DATA_CF_ACK_POLL	3	/* Data + CF-Ack + CF-Poll */
-#define FC_SUBTYPE_NULL			4	/* Null */
-#define FC_SUBTYPE_CF_ACK		5	/* CF-Ack */
-#define FC_SUBTYPE_CF_POLL		6	/* CF-Poll */
-#define FC_SUBTYPE_CF_ACK_POLL		7	/* CF-Ack + CF-Poll */
-#define FC_SUBTYPE_QOS_DATA		8	/* QoS Data */
-#define FC_SUBTYPE_QOS_DATA_CF_ACK	9	/* QoS Data + CF-Ack */
-#define FC_SUBTYPE_QOS_DATA_CF_POLL	10	/* QoS Data + CF-Poll */
-#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL	11	/* QoS Data + CF-Ack + CF-Poll */
-#define FC_SUBTYPE_QOS_NULL		12	/* QoS Null */
-#define FC_SUBTYPE_QOS_CF_POLL		14	/* QoS CF-Poll */
-#define FC_SUBTYPE_QOS_CF_ACK_POLL	15	/* QoS CF-Ack + CF-Poll */
-
-/* Data Subtype Groups */
-#define FC_SUBTYPE_ANY_QOS(s)		(((s) & 8) != 0)
-#define FC_SUBTYPE_ANY_NULL(s)		(((s) & 4) != 0)
-#define FC_SUBTYPE_ANY_CF_POLL(s)	(((s) & 2) != 0)
-#define FC_SUBTYPE_ANY_CF_ACK(s)	(((s) & 1) != 0)
-
-/* Type/Subtype Combos */
-#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)	/* FC kind mask */
-
-#define FC_KIND(t, s)	(((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))	/* FC kind */
-
-#define FC_SUBTYPE(fc)	(((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT)	/* Subtype from FC */
-#define FC_TYPE(fc)	(((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT)	/* Type from FC */
-
-#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)	/* assoc. request */
-#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)	/* assoc. response */
-#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)	/* reassoc. request */
-#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)	/* reassoc. response */
-#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)	/* probe request */
-#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)	/* probe response */
-#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)		/* beacon */
-#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)	/* disassoc */
-#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)		/* authentication */
-#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)		/* deauthentication */
-#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)		/* action */
-
-#define FC_BLOCKACK_REQ	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ)	/* Block Ack Req */
-#define FC_BLOCKACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK)	/* Block Ack */
-#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)	/* PS poll */
-#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)		/* RTS */
-#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)		/* CTS */
-#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)		/* ACK */
-#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)		/* CF-END */
-#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)	/* CF-END ACK */
-
-#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)		/* data */
-#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)		/* null data */
-#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)	/* data CF ACK */
-#define FC_QOS_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)	/* QoS data */
-#define FC_QOS_NULL	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)	/* QoS null */
-
-/* QoS Control Field */
-
-/* 802.1D Priority */
-#define QOS_PRIO_SHIFT		0	/* QoS priority shift */
-#define QOS_PRIO_MASK		0x0007	/* QoS priority mask */
-#define QOS_PRIO(qos)		(((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)	/* QoS priority */
-
-/* Traffic Identifier */
-#define QOS_TID_SHIFT		0	/* QoS TID shift */
-#define QOS_TID_MASK		0x000f	/* QoS TID mask */
-#define QOS_TID(qos)		(((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)	/* QoS TID */
-
-/* End of Service Period (U-APSD) */
-#define QOS_EOSP_SHIFT		4	/* QoS End of Service Period shift */
-#define QOS_EOSP_MASK		0x0010	/* QoS End of Service Period mask */
-#define QOS_EOSP(qos)		(((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT)	/* Qos EOSP */
-
-/* Ack Policy */
-#define QOS_ACK_NORMAL_ACK	0	/* Normal Ack */
-#define QOS_ACK_NO_ACK		1	/* No Ack (eg mcast) */
-#define QOS_ACK_NO_EXP_ACK	2	/* No Explicit Ack */
-#define QOS_ACK_BLOCK_ACK	3	/* Block Ack */
-#define QOS_ACK_SHIFT		5	/* QoS ACK shift */
-#define QOS_ACK_MASK		0x0060	/* QoS ACK mask */
-#define QOS_ACK(qos)		(((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)	/* QoS ACK */
-
-/* A-MSDU flag */
-#define QOS_AMSDU_SHIFT		7	/* AMSDU shift */
-#define QOS_AMSDU_MASK		0x0080	/* AMSDU mask */
-
-/* Management Frames */
-
-/* Management Frame Constants */
-
-/* Fixed fields */
-#define DOT11_MNG_AUTH_ALGO_LEN		2	/* d11 management auth. algo. length */
-#define DOT11_MNG_AUTH_SEQ_LEN		2	/* d11 management auth. seq. length */
-#define DOT11_MNG_BEACON_INT_LEN	2	/* d11 management beacon interval length */
-#define DOT11_MNG_CAP_LEN		2	/* d11 management cap. length */
-#define DOT11_MNG_AP_ADDR_LEN		6	/* d11 management AP address length */
-#define DOT11_MNG_LISTEN_INT_LEN	2	/* d11 management listen interval length */
-#define DOT11_MNG_REASON_LEN		2	/* d11 management reason length */
-#define DOT11_MNG_AID_LEN		2	/* d11 management AID length */
-#define DOT11_MNG_STATUS_LEN		2	/* d11 management status length */
-#define DOT11_MNG_TIMESTAMP_LEN		8	/* d11 management timestamp length */
-
-/* DUR/ID field in assoc resp is 0xc000 | AID */
-#define DOT11_AID_MASK			0x3fff	/* d11 AID mask */
-
-/* Reason Codes */
-#define DOT11_RC_RESERVED			0	/* d11 RC reserved */
-#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
-#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer
-							 * valid
-							 */
-#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station
-							 * is leaving (or has left) IBSS or ESS
-							 */
-#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
-#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable
-							 * to handle all currently associated
-							 * stations
-							 */
-#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
-							 * nonauthenticated station
-							 */
-#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
-							 *  nonassociated station
-							 */
-#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
-							 * leaving (or has left) BSS
-							 */
-#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
-							 * not authenticated with responding
-							 * station
-							 */
-#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
-
-/* Status Codes */
-#define DOT11_STATUS_SUCCESS			0	/* Successful */
-#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
-#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested
-							 * capabilities in the Capability
-							 * Information field
-							 */
-#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability
-							 * to confirm that association exists
-							 */
-#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason
-							 * outside the scope of this standard
-							 */
-#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support
-							 * the specified authentication
-							 * algorithm
-							 */
-#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame
-							 * with authentication transaction
-							 * sequence number out of expected
-							 * sequence
-							 */
-#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of
-							 * challenge failure
-							 */
-#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout
-							 * waiting for next frame in sequence
-							 */
-#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is
-							 * unable to handle additional
-							 * associated stations
-							 */
-#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting
-							 * station not supporting all of the
-							 * data rates in the BSSBasicRateSet
-							 * parameter
-							 */
-#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting
-							 * station not supporting the Short
-							 * Preamble option
-							 */
-#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting
-							 * station not supporting the PBCC
-							 * Modulation option
-							 */
-#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting
-							 * station not supporting the Channel
-							 * Agility option
-							 */
-#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum
-							 * Management capability is required.
-							 */
-#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info
-							 * in the Power Cap element is
-							 * unacceptable.
-							 */
-#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info
-							 * in the Supported Channel element is
-							 * unacceptable
-							 */
-#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting
-							 * station not supporting the Short Slot
-							 * Time option
-							 */
-#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting
-							 * station not supporting the ER-PBCC
-							 * Modulation option
-							 */
-#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting
-							 * station not supporting the DSS-OFDM
-							 * option
-							 */
-
-/* Info Elts, length of INFORMATION portion of Info Elts */
-#define DOT11_MNG_DS_PARAM_LEN			1	/* d11 management DS parameter length */
-#define DOT11_MNG_IBSS_PARAM_LEN		2	/* d11 management IBSS parameter length */
-
-/* TIM Info element has 3 bytes fixed info in INFORMATION field,
- * followed by 1 to 251 bytes of Partial Virtual Bitmap
- */
-#define DOT11_MNG_TIM_FIXED_LEN			3	/* d11 management TIM fixed length */
-#define DOT11_MNG_TIM_DTIM_COUNT		0	/* d11 management DTIM count */
-#define DOT11_MNG_TIM_DTIM_PERIOD		1	/* d11 management DTIM period */
-#define DOT11_MNG_TIM_BITMAP_CTL		2	/* d11 management TIM BITMAP control  */
-#define DOT11_MNG_TIM_PVB			3	/* d11 management TIM PVB */
-
-/* TLV defines */
-#define TLV_TAG_OFF		0	/* tag offset */
-#define TLV_LEN_OFF		1	/* length offset */
-#define TLV_HDR_LEN		2	/* header length */
-#define TLV_BODY_OFF		2	/* body offset */
-
-/* Management Frame Information Element IDs */
-#define DOT11_MNG_SSID_ID			0	/* d11 management SSID id */
-#define DOT11_MNG_RATES_ID			1	/* d11 management rates id */
-#define DOT11_MNG_FH_PARMS_ID			2	/* d11 management FH parameter id */
-#define DOT11_MNG_DS_PARMS_ID			3	/* d11 management DS parameter id */
-#define DOT11_MNG_CF_PARMS_ID			4	/* d11 management CF parameter id */
-#define DOT11_MNG_TIM_ID			5	/* d11 management TIM id */
-#define DOT11_MNG_IBSS_PARMS_ID			6	/* d11 management IBSS parameter id */
-#define DOT11_MNG_COUNTRY_ID			7	/* d11 management country id */
-#define DOT11_MNG_HOPPING_PARMS_ID		8	/* d11 management hopping parameter id */
-#define DOT11_MNG_HOPPING_TABLE_ID		9	/* d11 management hopping table id */
-#define DOT11_MNG_REQUEST_ID			10	/* d11 management request id */
-#define DOT11_MNG_QBSS_LOAD_ID 			11	/* d11 management QBSS Load id */
-#define DOT11_MNG_CHALLENGE_ID			16	/* d11 management chanllenge id */
-#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
-#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
-#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
-#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
-#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
-#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement */
-#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
-#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
-#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
-#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
-#define DOT11_MNG_ERP_ID			42	/* d11 management ERP id */
-#define DOT11_MNG_TS_DELAY_ID			43	/* d11 management TS Delay id */
-#define DOT11_MNG_NONERP_ID			47	/* d11 management NON-ERP id */
-#define DOT11_MNG_RSN_ID			48	/* d11 management RSN id */
-#define DOT11_MNG_EXT_RATES_ID			50	/* d11 management ext. rates id */
-#define DOT11_MNG_WPA_ID			221	/* d11 management WPA id */
-#define DOT11_MNG_PROPR_ID			221	/* d11 management proprietary id */
-
-/* Rate element Basic flag and rate mask */
-#define DOT11_RATE_BASIC			0x80	/* flag for a Basic Rate */
-#define DOT11_RATE_MASK				0x7F	/* mask for numeric part of rate */
-
-/* ERP info element bit values */
-#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
-#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present
-							 *in the BSS
-							 */
-#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for
-							 *ERP-OFDM frames
-							 */
-#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed,
-							 * 1 == not allowed
-							 */
-/* TS Delay element offset & size */
-#define DOT11_MGN_TS_DELAY_LEN		4	/* length of TS DELAY IE */
-#define TS_DELAY_FIELD_SIZE			4	/* TS DELAY field size */
-
-/* Capability Information Field */
-#define DOT11_CAP_ESS				0x0001	/* d11 cap. ESS */
-#define DOT11_CAP_IBSS				0x0002	/* d11 cap. IBSS */
-#define DOT11_CAP_POLLABLE			0x0004	/* d11 cap. pollable */
-#define DOT11_CAP_POLL_RQ			0x0008	/* d11 cap. poll request */
-#define DOT11_CAP_PRIVACY			0x0010	/* d11 cap. privacy */
-#define DOT11_CAP_SHORT				0x0020	/* d11 cap. short */
-#define DOT11_CAP_PBCC				0x0040	/* d11 cap. PBCC */
-#define DOT11_CAP_AGILITY			0x0080	/* d11 cap. agility */
-#define DOT11_CAP_SPECTRUM			0x0100	/* d11 cap. spectrum */
-#define DOT11_CAP_SHORTSLOT			0x0400	/* d11 cap. shortslot */
-#define DOT11_CAP_CCK_OFDM			0x2000	/* d11 cap. CCK/OFDM */
-
-/* Action Frame Constants */
-#define DOT11_ACTION_CAT_ERR_MASK	0x80	/* d11 action category error mask */
-#define DOT11_ACTION_CAT_MASK		0x7F	/* d11 action category mask */
-#define DOT11_ACTION_CAT_SPECT_MNG	0x00	/* d11 action category spectrum management */
-#define DOT11_ACTION_CAT_BLOCKACK	0x03	/* d11 action category block ack */
-#define DOT11_ACTION_NOTIFICATION	0x11	/* 17 */
-
-#define DOT11_ACTION_ID_M_REQ		0	/* d11 action measurement request */
-#define DOT11_ACTION_ID_M_REP		1	/* d11 action measurement response */
-#define DOT11_ACTION_ID_TPC_REQ		2	/* d11 action TPC request */
-#define DOT11_ACTION_ID_TPC_REP		3	/* d11 action TPC response */
-#define DOT11_ACTION_ID_CHANNEL_SWITCH	4		/* d11 action channel switch */
-
-/* HT (EWC) action ids */
-#define DOT11_ACTION_ID_HT_CH_WIDTH	0	/* mimo ps action frame id */
-#define DOT11_ACTION_ID_HT_MIMO_PS	1	/* mimo ps action frame id */
-
-/* Block Ack action types */
-#define DOT11_BA_ACTION_ADDBA_REQ	0	/* ADDBA Req action frame type */
-#define DOT11_BA_ACTION_ADDBA_RESP	1	/* ADDBA Resp action frame type */
-#define DOT11_BA_ACTION_DELBA		2	/* DELBA action frame type */
-
-/* ADDBA action parameters */
-#define DOT11_ADDBA_PARAM_POLICY_MASK	0x0002	/* policy mask(ack vs delayed) */
-#define DOT11_ADDBA_PARAM_POLICY_SHIFT	1	/* policy shift */
-#define DOT11_ADDBA_PARAM_TID_MASK	0x003c	/* tid mask */
-#define DOT11_ADDBA_PARAM_TID_SHIFT	2	/* tid shift */
-#define DOT11_ADDBA_PARAM_BSIZE_MASK	0xffc0	/* buffer size mask */
-#define DOT11_ADDBA_PARAM_BSIZE_SHIFT	6	/* buffer size shift */
-
-#define DOT11_ADDBA_POLICY_DELAYED	0	/* delayed BA policy */
-#define DOT11_ADDBA_POLICY_IMMEDIATE	1	/* immediate BA policy */
-
-struct dot11_addba_req {
-	uint8 category;				/* category of action frame (3) */
-	uint8 action;				/* action: addba req */
-	uint8 token;				/* identifier */
-	uint16 addba_param_set;			/* parameter set */
-	uint16 timeout;				/* timeout in seconds */
-	uint16 start_seqnum;			/* starting sequence number */
-}PACKED;
-typedef struct dot11_addba_req dot11_addba_req_t;
-#define DOT11_ADDBA_REQ_LEN		9	/* length of addba req frame */
-
-struct dot11_addba_resp {
-	uint8 category;				/* category of action frame (3) */
-	uint8 action;				/* action: addba resp */
-	uint8 token;				/* identifier */
-	uint16 status;				/* status of add request */
-	uint16 addba_param_set;			/* negotiated parameter set */
-	uint16 timeout;				/* negotiated timeout in seconds */
-}PACKED;
-typedef struct dot11_addba_resp dot11_addba_resp_t;
-#define DOT11_ADDBA_RESP_LEN		9	/* length of addba resp frame */
-
-/* DELBA action parameters */
-#define DOT11_DELBA_PARAM_INIT_MASK	0x0800	/* initiator mask */
-#define DOT11_DELBA_PARAM_INIT_SHIFT	11	/* initiator shift */
-#define DOT11_DELBA_PARAM_TID_MASK	0xf000	/* tid mask */
-#define DOT11_DELBA_PARAM_TID_SHIFT	12	/* tid shift */
-
-struct dot11_delba {
-	uint8 category;				/* category of action frame (3) */
-	uint8 action;				/* action: addba req */
-	uint16 delba_param_set;			/* paarmeter set */
-	uint16 reason;				/* reason for dellba */
-}PACKED;
-typedef struct dot11_delba dot11_delba_t;
-#define DOT11_DELBA_LEN			6	/* length of delba frame */
-
-/* MLME Enumerations */
-#define DOT11_BSSTYPE_INFRASTRUCTURE		0	/* d11 infrastructure */
-#define DOT11_BSSTYPE_INDEPENDENT		1	/* d11 independent */
-#define DOT11_BSSTYPE_ANY			2	/* d11 any BSS type */
-#define DOT11_SCANTYPE_ACTIVE			0	/* d11 scan active */
-#define DOT11_SCANTYPE_PASSIVE			1	/* d11 scan passive */
-
-/* 802.11 BRCM "Compromise" Pre N constants */
-#define PREN_PREAMBLE		24	/* green field preamble time */
-#define PREN_MM_EXT		16	/* extra mixed mode preamble time */
-#define PREN_PREAMBLE_EXT	4	/* extra preamble (multiply by unique_streams-1) */
-
-/* 802.11 A PHY constants */
-#define APHY_SLOT_TIME		9	/* APHY slot time */
-#define APHY_SIFS_TIME		16	/* APHY SIFS time */
-#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))	/* APHY DIFS time */
-#define APHY_PREAMBLE_TIME	16	/* APHY preamble time */
-#define APHY_SIGNAL_TIME	4	/* APHY signal time */
-#define APHY_SYMBOL_TIME	4	/* APHY symbol time */
-#define APHY_SERVICE_NBITS	16	/* APHY service nbits */
-#define APHY_TAIL_NBITS		6	/* APHY tail nbits */
-#define	APHY_CWMIN		15	/* APHY cwmin */
-
-/* 802.11 B PHY constants */
-#define BPHY_SLOT_TIME		20	/* BPHY slot time */
-#define BPHY_SIFS_TIME		10	/* BPHY SIFS time */
-#define BPHY_DIFS_TIME		50	/* BPHY DIFS time */
-#define BPHY_PLCP_TIME		192	/* BPHY PLCP time */
-#define BPHY_PLCP_SHORT_TIME	96	/* BPHY PLCP short time */
-#define	BPHY_CWMIN		31	/* BPHY cwmin */
-
-/* 802.11 G constants */
-#define DOT11_OFDM_SIGNAL_EXTENSION	6	/* d11 OFDM signal extension */
-
-#define PHY_CWMAX		1023	/* PHY cwmax */
-
-#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
-
-/* dot11Counters Table - 802.11 spec., Annex D */
-typedef struct d11cnt {
-	uint32		txfrag;		/* dot11TransmittedFragmentCount */
-	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
-	uint32		txfail;		/* dot11FailedCount */
-	uint32		txretry;	/* dot11RetryCount */
-	uint32		txretrie;	/* dot11MultipleRetryCount */
-	uint32		rxdup;		/* dot11FrameduplicateCount */
-	uint32		txrts;		/* dot11RTSSuccessCount */
-	uint32		txnocts;	/* dot11RTSFailureCount */
-	uint32		txnoack;	/* dot11ACKFailureCount */
-	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
-	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
-	uint32		rxcrc;		/* dot11FCSErrorCount */
-	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
-	uint32		rxundec;	/* dot11WEPUndecryptableCount */
-} d11cnt_t;
-
-/* BRCM OUI */
-#define BRCM_OUI		"\x00\x10\x18"	/* Broadcom OUI */
-
-/* OUI for BRCM proprietary IE */
-#define BRCM_PROP_OUI		"\x00\x90\x4C"	/* Broadcom proprietary OUI */
-
-/* BRCM info element */
-struct brcm_ie {
-	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
-	uint8	len;		/* IE length */
-	uint8	oui[3];		/* Proprietary OUI, BRCM_OUI */
-	uint8	ver;		/* type/ver of this IE */
-	uint8	assoc;		/* # of assoc STAs */
-	uint8	flags;		/* misc flags */
-	uint8	flags1;		/* misc flags */
-	uint16	amsdu_mtu_pref;	/* preferred A-MSDU MTU */
-} PACKED;
-typedef	struct brcm_ie brcm_ie_t;
-#define BRCM_IE_LEN		11	/* BRCM IE length */
-#define BRCM_IE_VER		2	/* BRCM IE version */
-#define BRCM_IE_LEGACY_AES_VER	1	/* BRCM IE legacy AES version */
-
-/* brcm_ie flags */
-#define	BRF_ABCAP		0x1	/* afterburner capable */
-#define	BRF_ABRQRD		0x2	/* afterburner requested */
-#define	BRF_LZWDS		0x4	/* lazy wds enabled */
-#define	BRF_BLOCKACK		0x8	/* BlockACK capable */
-#define BRF_ABCOUNTER_MASK	0xf0	/* afterburner wds "state" counter */
-#define BRF_ABCOUNTER_SHIFT	4	/* offset of afterburner wds "state" counter */
-
-/* brcm_ie flags1 */
-#define	BRF1_AMSDU		0x1	/* A-MSDU capable */
-
-#define AB_WDS_TIMEOUT_MAX	15	/* afterburner wds Max count indicating not
-					 * locally capable
-					 */
-#define AB_WDS_TIMEOUT_MIN	1	/* afterburner wds, use zero count as indicating
-					 * "downrev"
-					 */
-
-/* EWC definitions */
-#define MCSSET_LEN	16	/* 16-bits per 8-bit set to give 128-bits bitmap of MCS Index */
-
-struct ewc_cap {
-	uint16	cap;
-	uint8	params;
-	uint8	supp_mcs[MCSSET_LEN];
-	uint16	ext_htcap;
-	uint32	txbf_cap;
-	uint8	as_cap;
-} PACKED;
-typedef struct ewc_cap ewc_cap_t;
-
-/* CAP IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
-/* the capability IE is primarily used to convey this nodes abilities */
-struct ewc_cap_ie {
-	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
-	uint8	len;		/* IE length */
-	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
-	uint8	type;           /* type inidicates what follows */
-	ewc_cap_t cap;
-} PACKED;
-typedef struct ewc_cap_ie ewc_cap_ie_t;
-
-#define EWC_CAP_IE_LEN	(26+4)	
-#define EWC_CAP_IE_TYPE	51      
-
-#define EWC_CAP_ADC_CODING	0x0001	/* Advance coding support */
-#define EWC_CAP_40MHZ		0x0002  /* FALSE:20Mhz, TRUE: 20 and 40MHZ supported */
-#define EWC_CAP_MIMO_PS_MASK	0x000C  /* Mimo PS mask */
-#define EWC_CAP_MIMO_PS_SHIFT	0x0002	/* Mimo PS shift */
-#define EWC_CAP_MIMO_PS_OFF	0x0003	/* Mimo PS, no restriction */
-#define EWC_CAP_MIMO_PS_RTS	0x0001	/* Mimo PS, send RTS/CTS around MIMO frames */
-#define EWC_CAP_MIMO_PS_ON	0x0000	/* Mimo PS, MIMO disallowed */
-#define EWC_CAP_GF		0x0010	/* Greenfield preamble support */
-#define EWC_CAP_SHORT_GI_20	0x0020	/* 20MHZ short guard interval support */
-#define EWC_CAP_SHORT_GI_40	0x0040	/* 40Mhz short guard interval support */
-#define EWC_CAP_TX_STBC		0x0080	/* Tx STBC support */
-#define EWC_CAP_RX_STBC_MASK	0x0300	/* Rx STBC mask */
-#define EWC_CAP_RX_STBC_SHIFT	8	/* Rx STBC shift */
-#define EWC_CAP_DELAYED_BA	0x0400	/* delayed BA support */
-#define EWC_CAP_MAX_AMSDU	0x0800	/* Max AMSDU size in bytes , 0=3839, 1=7935 */
-#define EWC_CAP_DSSS_CCK	0x1000	/* DSSS/CCK supported by the BSS */
-#define EWC_CAP_PSMP		0x2000	/* Power Save Multi Poll support */
-#define EWC_CAP_STBC_CTL	0x4000	/* STBC control frame support */
-#define EWC_CAP_LSIG_TXOP	0x8000	/* L-SIG TXOP protection support */
-
-#define EWC_MAX_AMSDU		7935	/* max amsdu size (bytes) per the EWC spec */
-#define EWC_MIN_AMSDU		3835	/* min amsdu size (bytes) per the EWC spec */
-
-#define EWC_PARAMS_RX_FACTOR_MASK	0x03	/* ampdu rcv factor mask */
-#define EWC_PARAMS_DENSITY_MASK		0x1C	/* ampdu density mask */
-#define EWC_PARAMS_DENSITY_SHIFT	2	/* ampdu density shift */
-
-/* EWC/AMPDU specific define */
-#define AMPDU_MAX_MPDU_DENSITY	7	/* max mpdu density; in 1/8 usec units */
-#define AMPDU_MAX_RX_FACTOR	3	/* max rcv ampdu len (64kb) */
-#define AMPDU_RX_FACTOR_BASE	8*1024	/* ampdu factor base for rx len */
-#define AMPDU_DELIMITER_LEN	4	/* length of ampdu delimiter */
-
-struct ewc_add {
-	uint8	ctl_ch;			/* control channel number */
-	uint8	byte1;			/* ext ch,rec. ch. width, RIFS support */
-	uint16	opmode;			/* operation mode */
-	uint16	misc_bits;		/* misc bits */
-	uint8	basic_mcs[MCSSET_LEN];  /* required MCS set */
-} PACKED;
-typedef struct ewc_add ewc_add_t;
-
-/* ADD IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
-/* the additional IE is primarily used to convey the current BSS configuration */
-struct ewc_add_ie {
-	uint8	id;		/* IE ID, 221, DOT11_MNG_PROPR_ID */
-	uint8	len;		/* IE length */
-	uint8	oui[3];		/* Proprietary OUI, BRCM_PROP_OUI */
-	uint8	type;		/* indicates what follows */
-	ewc_add_t add;
-} PACKED;
-typedef struct ewc_add_ie ewc_add_ie_t;
-
-#define EWC_ADD_IE_LEN	(22+4)	
-#define EWC_ADD_IE_TYPE	52	
-
-/* byte1 defn's */
-#define EWC_EXT_CH_MASK		0x03	/* extension channel mask */
-#define EWC_EXT_CH_UPPER	0x01	/* ext. ch. on upper sb */
-#define EWC_EXT_CH_LOWER	0x03	/* ext. ch. on lower sb */
-#define EWC_EXT_CH_NONE		0x00	/* extension channel mask */
-#define EWC_BW_ANY		0x04	/* set, STA can use 20 or 40MHz */
-#define EWC_RIFS_PERMITTED     	0x08	/* RIFS allowed */
-
-/* opmode defn's */
-#define EWC_OPMODE_MASK		0x0003	/* protection mode mask */
-#define EWC_OPMODE_PURE		0x0000	/* protection mode PURE */
-#define EWC_OPMODE_HT20IN40	0x0002	/* protection mode 20MHz HT in 40MHz BSS */
-#define EWC_OPMODE_MIXED	0x0003	/* protection mode Mixed Mode */
-#define EWC_NONGF_PRESENT	0x0004	/* protection mode non-GF */
-
-/* misc_bites defn's */
-#define EWC_BASIC_STBC_MCS	0x007f	/* basic STBC MCS */
-#define EWC_DUAL_STBC_PROT	0x0080	/* Dual STBC Protection */
-#define EWC_SECOND_BCN		0x0100	/* Secondary beacon support */
-#define EWC_LSIG_TXOP		0x0200	/* L-SIG TXOP Protection full support */
-#define EWC_PCO_ACTIVE		0x0400	/* PCO active */
-#define EWC_PCO_PHASE		0x0800	/* PCO phase */
-
-/* Macros for opmode */
-#define EWC_MIXEDMODE_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
-				   == EWC_OPMODE_MIXED)	/* mixed mode present */
-#define EWC_HT20_PRESENT(add)	((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
-				== EWC_OPMODE_HT20IN40)	/* 20MHz HT present */
-#define EWC_USE_PROTECTION(add) (EWC_HT20_PRESENT((add)) || \
-				EWC_MIXEDMODE_PRESENT((add)))	/* use protection */
-
-/* Vendor IE structure */
-struct vndr_ie {
-	uchar id;
-	uchar len;
-	uchar oui [3];
-	uchar data [1]; 	/* Variable size data */
-}PACKED;
-typedef struct vndr_ie vndr_ie_t;
-
-#define VNDR_IE_HDR_LEN		2	/* id + len field */
-#define VNDR_IE_MIN_LEN		3	/* size of the oui field */
-#define VNDR_IE_MAX_LEN		256	/* verdor IE max length */
-
-/* WPA definitions */
-#define WPA_VERSION		1	/* WPA version */
-#define WPA_OUI			"\x00\x50\xF2"	/* WPA OUI */
-
-#define WPA2_VERSION		1	/* WPA2 version */
-#define WPA2_VERSION_LEN	2	/* WAP2 version length */
-#define WPA2_OUI		"\x00\x0F\xAC"	/* WPA2 OUI */
-
-#define WPA_OUI_LEN	3	/* WPA OUI length */
-
-/* RSN authenticated key managment suite */
-#define RSN_AKM_NONE		0	/* None (IBSS) */
-#define RSN_AKM_UNSPECIFIED	1	/* Over 802.1x */
-#define RSN_AKM_PSK		2	/* Pre-shared Key */
-
-/* Key related defines */
-#define DOT11_MAX_DEFAULT_KEYS	4	/* number of default keys */
-#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
-#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
-#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
-
-#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
-#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
-#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
-#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
-#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
-#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
-#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
-#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
-#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
-#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
-#define TKIP_MIC_SUP_RX		TKIP_MIC_AUTH_TX	/* offset to Supplicant MIC RX key */
-#define TKIP_MIC_SUP_TX		TKIP_MIC_AUTH_RX	/* offset to Supplicant MIC TX key */
-#define AES_KEY_SIZE		16	/* size of AES key */
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _802_11_H_ */
diff --git a/package/broadcom-wl/src/wlc/include/proto/bcmeth.h b/package/broadcom-wl/src/wlc/include/proto/bcmeth.h
deleted file mode 100644
index 7b3295389a..0000000000
--- a/package/broadcom-wl/src/wlc/include/proto/bcmeth.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Broadcom Ethernettype  protocol definitions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id: bcmeth.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
- */
-
-/*
- * Broadcom Ethernet protocol defines
- */
-
-#ifndef _BCMETH_H_
-#define _BCMETH_H_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif
-
-/* ETHER_TYPE_BRCM is defined in ethernet.h */
-
-/*
- * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
- * in one of two formats: (only subtypes 32768-65535 are in use now)
- *
- * subtypes 0-32767:
- *     8 bit subtype (0-127)
- *     8 bit length in bytes (0-255)
- *
- * subtypes 32768-65535:
- *     16 bit big-endian subtype
- *     16 bit big-endian length in bytes (0-65535)
- *
- * length is the number of additional bytes beyond the 4 or 6 byte header
- *
- * Reserved values:
- * 0 reserved
- * 5-15 reserved for iLine protocol assignments
- * 17-126 reserved, assignable
- * 127 reserved
- * 32768 reserved
- * 32769-65534 reserved, assignable
- * 65535 reserved
- */
-
-/* 
- * While adding the subtypes and their specific processing code make sure
- * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
- */
-
-#define	BCMILCP_SUBTYPE_RATE		1
-#define	BCMILCP_SUBTYPE_LINK		2
-#define	BCMILCP_SUBTYPE_CSA		3
-#define	BCMILCP_SUBTYPE_LARQ		4
-#define BCMILCP_SUBTYPE_VENDOR		5
-#define	BCMILCP_SUBTYPE_FLH		17
-
-#define BCMILCP_SUBTYPE_VENDOR_LONG	32769
-#define BCMILCP_SUBTYPE_CERT		32770
-#define BCMILCP_SUBTYPE_SES		32771
-
-
-#define BCMILCP_BCM_SUBTYPE_RESERVED	0
-#define BCMILCP_BCM_SUBTYPE_EVENT		1
-#define BCMILCP_BCM_SUBTYPE_SES			2
-/*
- * The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
- * within BCMILCP_BCM_SUBTYPE_EVENT type messages
- */
-/* #define BCMILCP_BCM_SUBTYPE_EAPOL		3 */
-
-#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH	8
-#define BCMILCP_BCM_SUBTYPEHDR_VERSION		0
-
-/* These fields are stored in network order */
-typedef  struct bcmeth_hdr
-{
-	uint16	subtype;	/* Vendor specific..32769 */
-	uint16	length;
-	uint8	version;	/* Version is 0 */
-	uint8	oui[3];		/* Broadcom OUI */
-	/* user specific Data */
-	uint16	usr_subtype;
-} PACKED bcmeth_hdr_t;
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif	/*  _BCMETH_H_ */
diff --git a/package/broadcom-wl/src/wlc/include/proto/bcmevent.h b/package/broadcom-wl/src/wlc/include/proto/bcmevent.h
deleted file mode 100644
index d922a5d215..0000000000
--- a/package/broadcom-wl/src/wlc/include/proto/bcmevent.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Broadcom Event  protocol definitions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- *
- * Dependencies: proto/bcmeth.h
- *
- * $Id: bcmevent.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
- *
- */
-
-/*
- * Broadcom Ethernet Events protocol defines
- *
- */
-
-#ifndef _BCMEVENT_H_
-#define _BCMEVENT_H_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif /* defined(__GNUC__) */
-
-#define BCM_EVENT_MSG_VERSION		1	/* wl_event_msg_t struct version */
-#define BCM_MSG_IFNAME_MAX		16	/* max length of interface name */
-
-/* flags */
-#define WLC_EVENT_MSG_LINK		0x01	/* link is up */
-#define WLC_EVENT_MSG_FLUSHTXQ		0x02	/* flush tx queue on MIC error */
-#define WLC_EVENT_MSG_GROUP		0x04	/* group MIC error */
-
-/* theses fields are stored in network order */
-typedef struct
-{
-	uint16	version;
-	uint16	flags;			/* see flags below */
-	uint32	event_type;		/* Message (see below) */
-	uint32	status;			/* Status code (see below) */
-	uint32	reason;			/* Reason code (if applicable) */
-	uint32	auth_type;		/* WLC_E_AUTH */
-	uint32	datalen;		/* data buf */
-	struct ether_addr	addr;	/* Station address (if applicable) */
-	char	ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
-} PACKED wl_event_msg_t;
-
-/* used by driver msgs */
-typedef struct bcm_event {
-	struct ether_header eth;
-	bcmeth_hdr_t		bcm_hdr;
-	wl_event_msg_t		event;
-	/* data portion follows */
-} PACKED bcm_event_t;
-
-#define BCM_MSG_LEN	(sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
-
-/* Event messages */
-#define WLC_E_SET_SSID		0	/* indicates status of set SSID */
-#define WLC_E_JOIN		1	/* differentiates join IBSS from found (WLC_E_START) IBSS */
-#define WLC_E_START		2	/* STA founded an IBSS or AP started a BSS */
-#define WLC_E_AUTH		3	/* 802.11 AUTH request */
-#define WLC_E_AUTH_IND		4	/* 802.11 AUTH indication */
-#define WLC_E_DEAUTH		5	/* 802.11 DEAUTH request */
-#define WLC_E_DEAUTH_IND	6	/* 802.11 DEAUTH indication */
-#define WLC_E_ASSOC		7	/* 802.11 ASSOC request */
-#define WLC_E_ASSOC_IND		8	/* 802.11 ASSOC indication */
-#define WLC_E_REASSOC		9	/* 802.11 REASSOC request */
-#define WLC_E_REASSOC_IND	10	/* 802.11 REASSOC indication */
-#define WLC_E_DISASSOC		11	/* 802.11 DISASSOC request */
-#define WLC_E_DISASSOC_IND	12	/* 802.11 DISASSOC indication */
-#define WLC_E_QUIET_START	13	/* 802.11h Quiet period started */
-#define WLC_E_QUIET_END		14	/* 802.11h Quiet period ended */
-#define WLC_E_BEACON_RX		15	/* BEACONS received/lost indication */
-#define WLC_E_LINK		16	/* generic link indication */
-#define WLC_E_MIC_ERROR		17	/* TKIP MIC error occurred */
-#define WLC_E_NDIS_LINK		18	/* NDIS style link indication */
-#define WLC_E_ROAM		19	/* roam attempt occurred: indicate status & reason */
-#define WLC_E_TXFAIL		20	/* change in dot11FailedCount (txfail) */
-#define WLC_E_PMKID_CACHE	21	/* WPA2 pmkid cache indication */
-#define WLC_E_RETROGRADE_TSF	22	/* current AP's TSF value went backward */
-#define WLC_E_PRUNE		23	/* AP was pruned from join list for reason */
-#define WLC_E_AUTOAUTH		24	/* report AutoAuth table entry match for join attempt */
-#define WLC_E_EAPOL_MSG		25	/* Event encapsulating an EAPOL message */
-#define WLC_E_SCAN_COMPLETE	26	/* Scan results are ready or scan was aborted */
-#define WLC_E_ADDTS_IND		27	/* indicate to host addts fail/success */
-#define WLC_E_DELTS_IND		28	/* indicate to host delts fail/success */
-#define WLC_E_BCNSENT_IND	29	/* indicate to host of beacon transmit */
-#define WLC_E_BCNRX_MSG		30	/* Send the received beacon up to the host */
-#define WLC_E_LAST		31	/* highest val + 1 for range checking */
-
-/* Event status codes */
-#define WLC_E_STATUS_SUCCESS		0	/* operation was successful */
-#define WLC_E_STATUS_FAIL		1	/* operation failed */
-#define WLC_E_STATUS_TIMEOUT		2	/* operation timed out */
-#define WLC_E_STATUS_NO_NETWORKS	3	/* failed due to no matching network found */
-#define WLC_E_STATUS_ABORT		4	/* operation was aborted */
-#define WLC_E_STATUS_NO_ACK		5	/* protocol failure: packet not ack'd */
-#define WLC_E_STATUS_UNSOLICITED	6	/* AUTH or ASSOC packet was unsolicited */
-#define WLC_E_STATUS_ATTEMPT		7	/* attempt to assoc to an auto auth configuration */
-
-/* roam reason codes */
-#define WLC_E_REASON_INITIAL_ASSOC	0	/* initial assoc */
-#define WLC_E_REASON_LOW_RSSI		1	/* roamed due to low RSSI */
-#define WLC_E_REASON_DEAUTH		2	/* roamed due to DEAUTH indication */
-#define WLC_E_REASON_DISASSOC		3	/* roamed due to DISASSOC indication */
-#define WLC_E_REASON_BCNS_LOST		4	/* roamed due to lost beacons */
-#define WLC_E_REASON_FAST_ROAM_FAILED	5	/* roamed due to fast roam failure */
-#define WLC_E_REASON_DIRECTED_ROAM	6	/* roamed due to request by AP */
-#define WLC_E_REASON_TSPEC_REJECTED	7	/* roamed due to TSPEC rejection */
-#define WLC_E_REASON_BETTER_AP		8	/* roamed due to finding better AP */
-
-/* prune reason codes */
-#define WLC_E_PRUNE_ENCR_MISMATCH	1	/* ecryption mismatch */
-#define WLC_E_PRUNE_BCAST_BSSID		2	/* AP uses a broadcast BSSID */
-#define WLC_E_PRUNE_MAC_DENY		3	/* STA's MAC addr is in AP's MAC deny list */
-#define WLC_E_PRUNE_MAC_NA		4	/* STA's MAC addr is not in AP's MAC allow list */
-#define WLC_E_PRUNE_REG_PASSV		5	/* AP not allowed due to regulatory restriction */
-#define WLC_E_PRUNE_SPCT_MGMT		6	/* AP does not support STA locale spectrum mgmt */
-#define WLC_E_PRUNE_RADAR		7	/* AP is on a radar channel of STA locale */
-#define WLC_E_RSN_MISMATCH		8	/* STA does not support AP's RSN */
-#define WLC_E_PRUNE_NO_COMMON_RATES	9	/* No rates in common with AP */
-#define WLC_E_PRUNE_BASIC_RATES		10	/* STA does not support all basic rates of BSS */
-#define WLC_E_PRUNE_CCXFAST_PREVAP	11	/* CCX FAST ROAM: prune previous AP */
-#define WLC_E_PRUNE_CIPHER_NA		12	/* BSS's cipher not supported */
-#define WLC_E_PRUNE_KNOWN_STA		13	/* AP is already known to us as a STA */
-#define WLC_E_PRUNE_CCXFAST_DROAM	14	/* CCX FAST ROAM: prune unqulified AP */
-#define WLC_E_PRUNE_WDS_PEER		15	/* AP is already known to us as a WDS peer */
-#define WLC_E_PRUNE_QBSS_LOAD		16	/* QBSS LOAD - AAC is too low */
-#define WLC_E_PRUNE_HOME_AP		17	/* prune home AP */
-
-/* WLC_SET_CALLBACK data type */
-typedef struct wlc_event_cb {
-	void (*fn)(void *, bcm_event_t *);	/* Callback function */
-	void *context;				/* Passed to callback function */
-} wlc_event_cb_t;
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif /* PACKED */
-
-#endif /* _BCMEVENT_H_ */
diff --git a/package/broadcom-wl/src/wlc/include/proto/ethernet.h b/package/broadcom-wl/src/wlc/include/proto/ethernet.h
deleted file mode 100644
index 03fd4f654c..0000000000
--- a/package/broadcom-wl/src/wlc/include/proto/ethernet.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id: ethernet.h,v 1.1.1.14 2006/02/27 03:43:16 honor Exp $
- */
-
-#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
-#define _NET_ETHERNET_H_
-
-#ifndef _TYPEDEFS_H_
-#include "typedefs.h"
-#endif
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif
-
-/*
- * The number of bytes in an ethernet (MAC) address.
- */
-#define	ETHER_ADDR_LEN		6
-
-/*
- * The number of bytes in the type field.
- */
-#define	ETHER_TYPE_LEN		2
-
-/*
- * The number of bytes in the trailing CRC field.
- */
-#define	ETHER_CRC_LEN		4
-
-/*
- * The length of the combined header.
- */
-#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-
-/*
- * The minimum packet length.
- */
-#define	ETHER_MIN_LEN		64
-
-/*
- * The minimum packet user data length.
- */
-#define	ETHER_MIN_DATA		46
-
-/*
- * The maximum packet length.
- */
-#define	ETHER_MAX_LEN		1518
-
-/*
- * The maximum packet user data length.
- */
-#define	ETHER_MAX_DATA		1500
-
-/* ether types */
-#define	ETHER_TYPE_IP		0x0800		/* IP */
-#define ETHER_TYPE_ARP		0x0806		/* ARP */
-#define ETHER_TYPE_8021Q	0x8100		/* 802.1Q */
-#define	ETHER_TYPE_BRCM		0x886c		/* Broadcom Corp. */
-#define	ETHER_TYPE_802_1X	0x888e		/* 802.1x */
-#ifdef BCMWPA2
-#define	ETHER_TYPE_802_1X_PREAUTH 0x88c7	/* 802.1x preauthentication */
-#endif
-
-/* Broadcom subtype follows ethertype;  First 2 bytes are reserved; Next 2 are subtype; */
-#define	ETHER_BRCM_SUBTYPE_LEN	4		/* Broadcom 4 byte subtype */
-#define	ETHER_BRCM_CRAM		0x1		/* Broadcom subtype cram protocol */
-
-/* ether header */
-#define ETHER_DEST_OFFSET	0		/* dest address offset */
-#define ETHER_SRC_OFFSET	6		/* src address offset */
-#define ETHER_TYPE_OFFSET	12		/* ether type offset */
-
-/*
- * A macro to validate a length with
- */
-#define	ETHER_IS_VALID_LEN(foo)	\
-	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-
-
-#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
-/*
- * Structure of a 10Mb/s Ethernet header.
- */
-struct	ether_header {
-	uint8	ether_dhost[ETHER_ADDR_LEN];
-	uint8	ether_shost[ETHER_ADDR_LEN];
-	uint16	ether_type;
-} PACKED;
-
-/*
- * Structure of a 48-bit Ethernet address.
- */
-struct	ether_addr {
-	uint8 octet[ETHER_ADDR_LEN];
-} PACKED;
-#endif	/* !__INCif_etherh Quick and ugly hack for VxWorks */
-
-/*
- * Takes a pointer, sets locally admininistered
- * address bit in the 48-bit Ethernet address.
- */
-#define ETHER_SET_LOCALADDR(ea)	(((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
-
-/*
- * Takes a pointer, returns true if a 48-bit multicast address
- * (including broadcast, since it is all ones)
- */
-#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
-
-
-/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
-#define	ether_cmp(a, b)	(!(((short*)a)[0] == ((short*)b)[0]) | \
-			 !(((short*)a)[1] == ((short*)b)[1]) | \
-			 !(((short*)a)[2] == ((short*)b)[2]))
-
-/* copy an ethernet address - assumes the pointers can be referenced as shorts */
-#define	ether_copy(s, d) { \
-		((short*)d)[0] = ((short*)s)[0]; \
-		((short*)d)[1] = ((short*)s)[1]; \
-		((short*)d)[2] = ((short*)s)[2]; }
-
-/*
- * Takes a pointer, returns true if a 48-bit broadcast (all ones)
- */
-#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
-			    ((uint8 *)(ea))[1] &		\
-			    ((uint8 *)(ea))[2] &		\
-			    ((uint8 *)(ea))[3] &		\
-			    ((uint8 *)(ea))[4] &		\
-			    ((uint8 *)(ea))[5]) == 0xff)
-
-static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-
-/*
- * Takes a pointer, returns true if a 48-bit null address (all zeros)
- */
-#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
-			    ((uint8 *)(ea))[1] |		\
-			    ((uint8 *)(ea))[2] |		\
-			    ((uint8 *)(ea))[3] |		\
-			    ((uint8 *)(ea))[4] |		\
-			    ((uint8 *)(ea))[5]) == 0)
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _NET_ETHERNET_H_ */
diff --git a/package/broadcom-wl/src/wlc/include/proto/wpa.h b/package/broadcom-wl/src/wlc/include/proto/wpa.h
deleted file mode 100644
index dd35dbef02..0000000000
--- a/package/broadcom-wl/src/wlc/include/proto/wpa.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Fundamental types and constants relating to WPA
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id: wpa.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
- */
-
-#ifndef _proto_wpa_h_
-#define _proto_wpa_h_
-
-#include <typedefs.h>
-#include <proto/ethernet.h>
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif
-
-/* Reason Codes */
-
-/* 10 and 11 are from TGh. */
-#define DOT11_RC_BAD_PC			10	/* Unacceptable power capability element */
-#define DOT11_RC_BAD_CHANNELS		11	/* Unacceptable supported channels element */
-/* 12 is unused */
-/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
-#define DOT11_RC_INVALID_WPA_IE		13	/* Invalid info. element */
-#define DOT11_RC_MIC_FAILURE		14	/* Michael failure */
-#define DOT11_RC_4WH_TIMEOUT		15	/* 4-way handshake timeout */
-#define DOT11_RC_GTK_UPDATE_TIMEOUT	16	/* Group key update timeout */
-#define DOT11_RC_WPA_IE_MISMATCH	17	/* WPA IE in 4-way handshake differs from
-						 * (re-)assoc. request/probe response
-						 */
-#define DOT11_RC_INVALID_MC_CIPHER	18	/* Invalid multicast cipher */
-#define DOT11_RC_INVALID_UC_CIPHER	19	/* Invalid unicast cipher */
-#define DOT11_RC_INVALID_AKMP		20	/* Invalid authenticated key management protocol */
-#define DOT11_RC_BAD_WPA_VERSION	21	/* Unsupported WPA version */
-#define DOT11_RC_INVALID_WPA_CAP	22	/* Invalid WPA IE capabilities */
-#define DOT11_RC_8021X_AUTH_FAIL	23	/* 802.1X authentication failure */
-
-#define WPA2_PMKID_LEN	16
-
-/* WPA IE fixed portion */
-typedef struct
-{
-	uint8 tag;	/* TAG */
-	uint8 length;	/* TAG length */
-	uint8 oui[3];	/* IE OUI */
-	uint8 oui_type;	/* OUI type */
-	struct {
-		uint8 low;
-		uint8 high;
-	} PACKED version;	/* IE version */
-} PACKED wpa_ie_fixed_t;
-#define WPA_IE_OUITYPE_LEN	4
-#define WPA_IE_FIXED_LEN	8
-#define WPA_IE_TAG_FIXED_LEN	6
-
-#ifdef BCMWPA2
-typedef struct {
-	uint8 tag;	/* TAG */
-	uint8 length;	/* TAG length */
-	struct {
-		uint8 low;
-		uint8 high;
-	} PACKED version;	/* IE version */
-} PACKED wpa_rsn_ie_fixed_t;
-#define WPA_RSN_IE_FIXED_LEN	4
-#define WPA_RSN_IE_TAG_FIXED_LEN	2
-typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
-#endif
-
-/* WPA suite/multicast suite */
-typedef struct
-{
-	uint8 oui[3];
-	uint8 type;
-} PACKED wpa_suite_t, wpa_suite_mcast_t;
-#define WPA_SUITE_LEN	4
-
-/* WPA unicast suite list/key management suite list */
-typedef struct
-{
-	struct {
-		uint8 low;
-		uint8 high;
-	} PACKED count;
-	wpa_suite_t list[1];
-} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
-#define WPA_IE_SUITE_COUNT_LEN	2
-#ifdef BCMWPA2
-typedef struct
-{
-	struct {
-		uint8 low;
-		uint8 high;
-	} PACKED count;
-	wpa_pmkid_t list[1];
-} PACKED wpa_pmkid_list_t;
-#endif
-
-/* WPA cipher suites */
-#define WPA_CIPHER_NONE		0	/* None */
-#define WPA_CIPHER_WEP_40	1	/* WEP (40-bit) */
-#define WPA_CIPHER_TKIP		2	/* TKIP: default for WPA */
-#define WPA_CIPHER_AES_OCB	3	/* AES (OCB) */
-#define WPA_CIPHER_AES_CCM	4	/* AES (CCM) */
-#define WPA_CIPHER_WEP_104	5	/* WEP (104-bit) */
-
-#define IS_WPA_CIPHER(cipher)	((cipher) == WPA_CIPHER_NONE || \
-				 (cipher) == WPA_CIPHER_WEP_40 || \
-				 (cipher) == WPA_CIPHER_WEP_104 || \
-				 (cipher) == WPA_CIPHER_TKIP || \
-				 (cipher) == WPA_CIPHER_AES_OCB || \
-				 (cipher) == WPA_CIPHER_AES_CCM)
-
-/* WPA TKIP countermeasures parameters */
-#define WPA_TKIP_CM_DETECT	60	/* multiple MIC failure window (seconds) */
-#define WPA_TKIP_CM_BLOCK	60	/* countermeasures active window (seconds) */
-
-/* WPA capabilities defined in 802.11i */
-#define WPA_CAP_4_REPLAY_CNTRS		2
-#define WPA_CAP_16_REPLAY_CNTRS		3
-#define WPA_CAP_REPLAY_CNTR_SHIFT	2
-#define WPA_CAP_REPLAY_CNTR_MASK	0x000c
-
-/* WPA Specific defines */
-#define WPA_CAP_LEN	2	/* Length of RSN capabilities in RSN IE (2 octets) */
-
-#ifdef BCMWPA2
-#define	WPA_CAP_WPA2_PREAUTH		1
-#endif /* BCMWPA2 */
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _proto_wpa_h_ */
diff --git a/package/broadcom-wl/src/wlc/include/typedefs.h b/package/broadcom-wl/src/wlc/include/typedefs.h
deleted file mode 100644
index 6c498bbcb2..0000000000
--- a/package/broadcom-wl/src/wlc/include/typedefs.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $
- */
-
-#ifndef _TYPEDEFS_H_
-#define _TYPEDEFS_H_
-
-/*
- * Inferred Typedefs
- *
- */
-
-/* Infer the compile environment based on preprocessor symbols and pramas.
- * Override type definitions as needed, and include configuration dependent
- * header files to define types.
- */
-
-#ifdef __cplusplus
-
-#define TYPEDEF_BOOL
-#ifndef FALSE
-#define FALSE	false
-#endif
-#ifndef TRUE
-#define TRUE	true
-#endif
-
-#endif	/* __cplusplus */
-
-#if defined(_NEED_SIZE_T_)
-typedef long unsigned int size_t;
-#endif
-
-#define TYPEDEF_UINT
-#define TYPEDEF_USHORT
-#define TYPEDEF_ULONG
-
-
-/* Do not support the (u)int64 types with strict ansi for GNU C */
-#if defined(__GNUC__) && defined(__STRICT_ANSI__)
-#define TYPEDEF_INT64
-#define TYPEDEF_UINT64
-#endif
-
-/* pick up ushort & uint from standard types.h */
-#if defined(linux) && defined(__KERNEL__)
-#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
-#else
-#include <sys/types.h>
-#endif
-
-/* use the default typedefs in the next section of this file */
-#define USE_TYPEDEF_DEFAULTS
-
-/*
- * Default Typedefs
- *
- */
-
-#ifdef USE_TYPEDEF_DEFAULTS
-#undef USE_TYPEDEF_DEFAULTS
-
-#ifndef TYPEDEF_BOOL
-typedef	/* @abstract@ */ unsigned char	bool;
-#endif
-
-/* define uchar, ushort, uint, ulong */
-
-#ifndef TYPEDEF_UCHAR
-typedef unsigned char	uchar;
-#endif
-
-#ifndef TYPEDEF_USHORT
-typedef unsigned short	ushort;
-#endif
-
-#ifndef TYPEDEF_UINT
-typedef unsigned int	uint;
-#endif
-
-#ifndef TYPEDEF_ULONG
-typedef unsigned long	ulong;
-#endif
-
-/* define [u]int8/16/32/64, uintptr */
-
-#ifndef TYPEDEF_UINT8
-typedef unsigned char	uint8;
-#endif
-
-#ifndef TYPEDEF_UINT16
-typedef unsigned short	uint16;
-#endif
-
-#ifndef TYPEDEF_UINT32
-typedef unsigned int	uint32;
-#endif
-
-#ifndef TYPEDEF_UINT64
-typedef unsigned long long uint64;
-#endif
-
-#ifndef TYPEDEF_UINTPTR
-typedef unsigned int	uintptr;
-#endif
-
-#ifndef TYPEDEF_INT8
-typedef signed char	int8;
-#endif
-
-#ifndef TYPEDEF_INT16
-typedef signed short	int16;
-#endif
-
-#ifndef TYPEDEF_INT32
-typedef signed int	int32;
-#endif
-
-#ifndef TYPEDEF_INT64
-typedef signed long long int64;
-#endif
-
-/* define float32/64, float_t */
-
-#ifndef TYPEDEF_FLOAT32
-typedef float		float32;
-#endif
-
-#ifndef TYPEDEF_FLOAT64
-typedef double		float64;
-#endif
-
-/*
- * abstracted floating point type allows for compile time selection of
- * single or double precision arithmetic.  Compiling with -DFLOAT32
- * selects single precision; the default is double precision.
- */
-
-#ifndef TYPEDEF_FLOAT_T
-
-#if defined(FLOAT32)
-typedef float32 float_t;
-#else /* default to double precision floating point */
-typedef float64 float_t;
-#endif
-
-#endif /* TYPEDEF_FLOAT_T */
-
-/* define macro values */
-
-#ifndef FALSE
-#define FALSE	0
-#endif
-
-#ifndef TRUE
-#define TRUE	1  /* TRUE */
-#endif
-
-#ifndef NULL
-#define	NULL	0
-#endif
-
-#ifndef OFF
-#define	OFF	0
-#endif
-
-#ifndef ON
-#define	ON	1  /* ON = 1 */
-#endif
-
-#define	AUTO	(-1) /* Auto = -1 */
-
-/* define PTRSZ, INLINE */
-
-#ifndef PTRSZ
-#define	PTRSZ	sizeof(char*)
-#endif
-
-#ifndef INLINE
-
-#ifdef _MSC_VER
-
-#define INLINE __inline
-
-#elif __GNUC__
-
-#define INLINE __inline__
-
-#else
-
-#define INLINE
-
-#endif /* _MSC_VER */
-
-#endif /* INLINE */
-
-#undef TYPEDEF_BOOL
-#undef TYPEDEF_UCHAR
-#undef TYPEDEF_USHORT
-#undef TYPEDEF_UINT
-#undef TYPEDEF_ULONG
-#undef TYPEDEF_UINT8
-#undef TYPEDEF_UINT16
-#undef TYPEDEF_UINT32
-#undef TYPEDEF_UINT64
-#undef TYPEDEF_UINTPTR
-#undef TYPEDEF_INT8
-#undef TYPEDEF_INT16
-#undef TYPEDEF_INT32
-#undef TYPEDEF_INT64
-#undef TYPEDEF_FLOAT32
-#undef TYPEDEF_FLOAT64
-#undef TYPEDEF_FLOAT_T
-
-#endif /* USE_TYPEDEF_DEFAULTS */
-
-/* 
- * Including the bcmdefs.h here, to make sure everyone including typedefs.h 
- * gets this automatically 
-*/
-#include <bcmdefs.h>
-
-#endif /* _TYPEDEFS_H_ */
diff --git a/package/broadcom-wl/src/wlc/include/wlioctl.h b/package/broadcom-wl/src/wlc/include/wlioctl.h
deleted file mode 100644
index 0558415d33..0000000000
--- a/package/broadcom-wl/src/wlc/include/wlioctl.h
+++ /dev/null
@@ -1,1384 +0,0 @@
-/*
- * Custom OID/ioctl definitions for
- * Broadcom 802.11abg Networking Device Driver
- *
- * Definitions subject to change without notice.
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id: wlioctl.h,v 1.1.1.22 2006/04/15 01:29:08 michael Exp $
- */
-
-#ifndef _wlioctl_h_
-#define	_wlioctl_h_
-
-#include <typedefs.h>
-#include <proto/ethernet.h>
-#include <proto/bcmeth.h>
-#include <proto/bcmevent.h>
-#include <proto/802.11.h>
-
-#ifdef __NetBSD__
-/* NetBSD 2.0 does not have SIOCDEVPRIVATE. This is NetBSD 2.0 specific */
-#define SIOCDEVPRIVATE	_IOWR('i', 139, struct ifreq)
-#endif
-
-/* require default structure packing */
-#if !defined(__GNUC__)
-#pragma pack(push, 8)
-#endif
-
-/* A chanspec holds the channel number, band, bandwidth and control sideband */
-typedef uint16 chanspec_t;
-#define WL_CHANSPEC_CHAN_MASK		0x00ff
-
-#define WL_CHANSPEC_CTL_SB_MASK		0x0300
-#define WL_CHANSPEC_CTL_SB_SHIFT	     8
-#define WL_CHANSPEC_CTL_SB_LOWER	0x0100
-#define WL_CHANSPEC_CTL_SB_UPPER	0x0200
-#define WL_CHANSPEC_CTL_SB_NONE		0x0300
-
-#define WL_CHANSPEC_BW_MASK		0x0C00
-#define WL_CHANSPEC_BW_SHIFT		    10
-#define WL_CHANSPEC_BW_10		0x0400
-#define WL_CHANSPEC_BW_20		0x0800
-#define WL_CHANSPEC_BW_40		0x0C00
-
-#define WL_CHANSPEC_BAND_MASK		0xf000
-#define WL_CHANSPEC_BAND_SHIFT		12
-#define WL_CHANSPEC_BAND_5G		0x1000
-#define WL_CHANSPEC_BAND_2G		0x2000
-#define INVCHANSPEC	255
-
-/* Legacy structure to help keep backward compatible wl tool and tray app */
-
-#define	LEGACY_WL_BSS_INFO_VERSION	107	/* older version of wl_bss_info struct */
-
-typedef struct wl_bss_info_107 {
-	uint32		version;		/* version field */
-	uint32		length;			/* byte length of data in this record,
-						 * starting at version and including IEs
-						 */
-	struct ether_addr BSSID;
-	uint16		beacon_period;		/* units are Kusec */
-	uint16		capability;		/* Capability information */
-	uint8		SSID_len;
-	uint8		SSID[32];
-	struct {
-		uint	count;			/* # rates in this set */
-		uint8	rates[16];		/* rates in 500kbps units w/hi bit set if basic */
-	} rateset;				/* supported rates */
-	uint8		channel;		/* Channel no. */
-	uint16		atim_window;		/* units are Kusec */
-	uint8		dtim_period;		/* DTIM period */
-	int16		RSSI;			/* receive signal strength (in dBm) */
-	int8		phy_noise;		/* noise (in dBm) */
-	uint32		ie_length;		/* byte length of Information Elements */
-	/* variable length Information Elements */
-} wl_bss_info_107_t;
-
-/*
- * Per-bss information structure.
- */
-
-#define	WL_BSS_INFO_VERSION	108		/* current version of wl_bss_info struct */
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in wl_scan_results_t)
- */
-typedef struct wl_bss_info {
-	uint32		version;		/* version field */
-	uint32		length;			/* byte length of data in this record,
-						 * starting at version and including IEs
-						 */
-	struct ether_addr BSSID;
-	uint16		beacon_period;		/* units are Kusec */
-	uint16		capability;		/* Capability information */
-	uint8		SSID_len;
-	uint8		SSID[32];
-	struct {
-		uint	count;			/* # rates in this set */
-		uint8	rates[16];		/* rates in 500kbps units w/hi bit set if basic */
-	} rateset;				/* supported rates */
-	chanspec_t	chanspec;		/* chanspec for bss */
-	uint16		atim_window;		/* units are Kusec */
-	uint8		dtim_period;		/* DTIM period */
-	int16		RSSI;			/* receive signal strength (in dBm) */
-	int8		phy_noise;		/* noise (in dBm) */
-
-	bool		n_cap;			/* BSS is 802.11N Capable */
-	uint32		nbss_cap;		/* 802.11N BSS Capabilities (based on EWC_CAP_*) */
-	uint8		ctl_ch;			/* 802.11N BSS control channel number */
-	uint32		reserved[2];		/* Reserved for expansion of BSS properties */
-	uint8		basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */
-
-	uint16		ie_offset;		/* offset at which IEs start, from beginning */
-	uint32		ie_length;		/* byte length of Information Elements */
-	/* Add new fields here */
-	/* variable length Information Elements */
-} wl_bss_info_t;
-
-typedef struct wlc_ssid {
-	uint32		SSID_len;
-	uchar		SSID[32];
-} wlc_ssid_t;
-
-typedef struct wl_scan_params {
-	wlc_ssid_t ssid;		/* default: {0, ""} */
-	struct ether_addr bssid;	/* default: bcast */
-	int8 bss_type;			/* default: any,
-					 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
-					 */
-	int8 scan_type;			/* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
-	int32 nprobes;			/* -1 use default, number of probes per channel */
-	int32 active_time;		/* -1 use default, dwell time per channel for
-					 * active scanning
-					 */
-	int32 passive_time;		/* -1 use default, dwell time per channel
-					 * for passive scanning
-					 */
-	int32 home_time;		/* -1 use default, dwell time for the home channel
-					 * between channel scans
-					 */
-	int32 channel_num;		/* 0 use default (all available channels), count of
-					 * channels in channel_list
-					 */
-	uint16 channel_list[1];		/* list of chanspecs */
-} wl_scan_params_t;
-/* size of wl_scan_params not including variable length array */
-#define WL_SCAN_PARAMS_FIXED_SIZE 64
-
-typedef struct wl_scan_results {
-	uint32 buflen;
-	uint32 version;
-	uint32 count;
-	wl_bss_info_t bss_info[1];
-} wl_scan_results_t;
-/* size of wl_scan_results not including variable length array */
-#define WL_SCAN_RESULTS_FIXED_SIZE 12
-
-
-#define WL_NUMRATES		255	/* max # of rates in a rateset */
-typedef struct wl_rateset {
-	uint32	count;			/* # rates in this set */
-	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
-} wl_rateset_t;
-
-/* uint32 list */
-typedef struct wl_uint32_list {
-	/* in - # of elements, out - # of entries */
-	uint32 count;
-	/* variable length uint32 list */
-	uint32 element[1];
-} wl_uint32_list_t;
-
-#define WLC_CNTRY_BUF_SZ	4		/* Country string is 3 bytes + NULL */
-
-/* defines used by the nrate iovar */
-#define NRATE_MCS_INUSE	0x00000080	/* MSC in use,indicates b0-6 holds an mcs */
-#define NRATE_RATE_MASK 0x0000007f	/* rate/mcs value */
-#define NRATE_STF_MASK	0x0000ff00	/* stf mode mask: siso, cdd, stbc, sdm */
-#define NRATE_STF_SHIFT	8		/* stf mode shift */
-
-#define ANTENNA_NUM_1	1		/* total number of antennas to be used */
-#define ANTENNA_NUM_2	2
-#define ANTENNA_NUM_3	3
-#define ANTENNA_NUM_4	4
-
-typedef struct wl_channels_in_country {
-	uint32 buflen;
-	uint32 band;
-	char country_abbrev[WLC_CNTRY_BUF_SZ];
-	uint32 count;
-	uint32 channel[1];
-} wl_channels_in_country_t;
-
-typedef struct wl_country_list {
-	uint32 buflen;
-	uint32 band_set;
-	uint32 band;
-	uint32 count;
-	char country_abbrev[1];
-} wl_country_list_t;
-
-#define WL_RM_TYPE_BASIC	1
-#define WL_RM_TYPE_CCA		2
-#define WL_RM_TYPE_RPI		3
-
-#define WL_RM_FLAG_PARALLEL	(1<<0)
-
-#define WL_RM_FLAG_LATE		(1<<1)
-#define WL_RM_FLAG_INCAPABLE	(1<<2)
-#define WL_RM_FLAG_REFUSED	(1<<3)
-
-typedef struct wl_rm_req_elt {
-	int8	type;
-	int8	flags;
-	chanspec_t	chanspec;
-	uint32	token;		/* token for this measurement */
-	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
-	uint32	tsf_l;		/* TSF low 32-bits */
-	uint32	dur;		/* TUs */
-} wl_rm_req_elt_t;
-
-typedef struct wl_rm_req {
-	uint32	token;		/* overall measurement set token */
-	uint32	count;		/* number of measurement requests */
-	wl_rm_req_elt_t	req[1];	/* variable length block of requests */
-} wl_rm_req_t;
-#define WL_RM_REQ_FIXED_LEN	8
-
-typedef struct wl_rm_rep_elt {
-	int8	type;
-	int8	flags;
-	chanspec_t	chanspec;
-	uint32	token;		/* token for this measurement */
-	uint32	tsf_h;		/* TSF high 32-bits of Measurement start time */
-	uint32	tsf_l;		/* TSF low 32-bits */
-	uint32	dur;		/* TUs */
-	uint32	len;		/* byte length of data block */
-	uint8	data[1];	/* variable length data block */
-} wl_rm_rep_elt_t;
-#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
-
-#define WL_RPI_REP_BIN_NUM 8
-typedef struct wl_rm_rpi_rep {
-	uint8	rpi[WL_RPI_REP_BIN_NUM];
-	int8	rpi_max[WL_RPI_REP_BIN_NUM];
-} wl_rm_rpi_rep_t;
-
-typedef struct wl_rm_rep {
-	uint32	token;		/* overall measurement set token */
-	uint32	len;		/* length of measurement report block */
-	wl_rm_rep_elt_t	rep[1];	/* variable length block of reports */
-} wl_rm_rep_t;
-#define WL_RM_REP_FIXED_LEN	8
-
-
-#if defined(BCMSUP_PSK)
-typedef enum sup_auth_status {
-	WLC_SUP_DISCONNECTED = 0,
-	WLC_SUP_CONNECTING,
-	WLC_SUP_IDREQUIRED,
-	WLC_SUP_AUTHENTICATING,
-	WLC_SUP_AUTHENTICATED,
-	WLC_SUP_KEYXCHANGE,
-	WLC_SUP_KEYED,
-	WLC_SUP_TIMEOUT
-} sup_auth_status_t;
-#endif	/* BCMCCX | BCMSUP_PSK */
-
-/* Enumerate crypto algorithms */
-#define	CRYPTO_ALGO_OFF			0
-#define	CRYPTO_ALGO_WEP1		1
-#define	CRYPTO_ALGO_TKIP		2
-#define	CRYPTO_ALGO_WEP128		3
-#define CRYPTO_ALGO_AES_CCM		4
-#define CRYPTO_ALGO_AES_OCB_MSDU	5
-#define CRYPTO_ALGO_AES_OCB_MPDU	6
-#define CRYPTO_ALGO_NALG		7
-
-#define WSEC_GEN_MIC_ERROR	0x0001
-#define WSEC_GEN_REPLAY		0x0002
-
-#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
-#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
-#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
-#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
-
-typedef struct wl_wsec_key {
-	uint32		index;		/* key index */
-	uint32		len;		/* key length */
-	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
-	uint32		pad_1[18];
-	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	uint32		flags;		/* misc flags */
-	uint32		pad_2[2];
-	int		pad_3;
-	int		iv_initialized;	/* has IV been initialized already? */
-	int		pad_4;
-	/* Rx IV */
-	struct {
-		uint32	hi;		/* upper 32 bits of IV */
-		uint16	lo;		/* lower 16 bits of IV */
-	} rxiv;
-	uint32		pad_5[2];
-	struct ether_addr ea;		/* per station */
-} wl_wsec_key_t;
-
-#define WSEC_MIN_PSK_LEN	8
-#define WSEC_MAX_PSK_LEN	64
-
-/* Flag for key material needing passhash'ing */
-#define WSEC_PASSPHRASE		(1<<0)
-
-/* receptacle for WLC_SET_WSEC_PMK parameter */
-typedef struct {
-	ushort	key_len;		/* octets in key material */
-	ushort	flags;			/* key handling qualification */
-	uint8	key[WSEC_MAX_PSK_LEN];	/* PMK material */
-} wsec_pmk_t;
-
-/* wireless security bitvec */
-#define WEP_ENABLED		0x0001
-#define TKIP_ENABLED		0x0002
-#define AES_ENABLED		0x0004
-#define WSEC_SWFLAG		0x0008
-#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
-#define FIPS_ENABLED	0x0080
-
-/* WPA authentication mode bitvec */
-#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
-#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
-#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
-#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
-/* #define WPA_AUTH_8021X 0x0020 */	/* 802.1x, reserved */
-#ifdef BCMWPA2
-#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
-#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
-#endif	/* BCMWPA2 */
-
-#ifdef BCMWPA2
-/* pmkid */
-#define	MAXPMKID		16	
-
-typedef struct _pmkid
-{
-	struct ether_addr	BSSID;
-	uint8			PMKID[WPA2_PMKID_LEN];
-} pmkid_t;
-
-typedef struct _pmkid_list
-{
-	uint32	npmkid;
-	pmkid_t	pmkid[1];
-} pmkid_list_t;
-
-typedef struct _pmkid_cand {
-	struct ether_addr	BSSID;
-	uint8			preauth;
-} pmkid_cand_t;
-
-typedef struct _pmkid_cand_list {
-	uint32	npmkid_cand;
-	pmkid_cand_t	pmkid_cand[1];
-} pmkid_cand_list_t;
-#endif	/* BCMWPA2 */
-
-typedef struct wl_led_info {
-	uint32		index;		/* led index */
-	uint32		behavior;
-	bool		activehi;
-} wl_led_info_t;
-
-typedef struct wlc_assoc_info {
-	uint32		req_len;
-	uint32		resp_len;
-	uint32		flags;
-	struct dot11_assoc_req req;
-	struct ether_addr reassoc_bssid; /* used in reassoc's */
-	struct dot11_assoc_resp resp;
-} wl_assoc_info_t;
-/* flags */
-#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
-/* srom read/write struct passed through ioctl */
-typedef struct {
-	uint	byteoff;		/* byte offset */
-	uint	nbytes;		/* number of bytes */
-	uint16 buf[1];
-} srom_rw_t;
-
-/* R_REG and W_REG struct passed through ioctl */
-typedef struct {
-	uint32	byteoff;	/* byte offset of the field in d11regs_t */
-	uint32	val;		/* read/write value of the field */
-	uint32	size;		/* sizeof the field */
-	uint	band;		/* band (optional) */
-} rw_reg_t;
-
-/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */
-/* PCL - Power Control Loop */
-/* current gain setting is replaced by user input */
-#define WL_ATTEN_APP_INPUT_PCL_OFF	0	/* turn off PCL, apply supplied input */
-#define WL_ATTEN_PCL_ON			1	/* turn on PCL */
-/* current gain setting is maintained */
-#define WL_ATTEN_PCL_OFF		2	/* turn off PCL. */
-typedef struct {
-	uint16	auto_ctrl;	/* WL_ATTEN_XX */
-	uint16	bb;		/* Baseband attenuation */
-	uint16	radio;		/* Radio attenuation */
-	uint16	txctl1;		/* Radio TX_CTL1 value */
-} atten_t;
-
-/* defines used by poweridx iovar - it controls power in a-band */
-/* current gain setting is maintained */
-#define WL_PWRIDX_PCL_OFF	-2	/* turn off PCL.  */
-#define WL_PWRIDX_PCL_ON	-1	/* turn on PCL */
-#define WL_PWRIDX_LOWER_LIMIT	-2	/* lower limit */
-#define WL_PWRIDX_UPPER_LIMIT	63	/* upper limit */
-/* value >= 0 causes
- *	- input to be set to that value
- *	- PCL to be off
- */
-
-/* Used to get specific STA parameters */
-typedef struct {
-	uint32	val;
-	struct ether_addr ea;
-} scb_val_t;
-
-
-/* Event data type */
-typedef struct wlc_event {
-	wl_event_msg_t event;		/* encapsulated event */
-	struct ether_addr *addr;	/* used to keep a trace of the potential present of
-					 * an address in wlc_event_msg_t
-					 */
-	void *data;			/* used to hang additional data on an event */
-	struct wlc_event *next;		/* enables ordered list of pending events */
-} wlc_event_t;
-
-#define BCM_MAC_STATUS_INDICATION	(0x40010200L)
-
-/* Please update the following when modifying this structure:
- *    StaInfo Twiki page flags section - description of the sta_info_t struct
- *    src/wl/exe/wlu.c - print of sta_info_t
- * Pay attention to version if structure changes.
- */
-typedef struct {
-	uint16			ver;		/* version of this struct */
-	uint16			len;		/* length in bytes of this structure */
-	uint16			cap;		/* sta's advertised capabilities */
-	uint32			flags;		/* flags defined below */
-	uint32			idle;		/* time since data pkt rx'd from sta */
-	struct ether_addr	ea;		/* Station address */
-	wl_rateset_t		rateset;	/* rateset in use */
-	uint32			in;		/* seconds elapsed since associated */
-	uint32			listen_interval_inms; /* Min Listen interval in ms for this STA */
-} sta_info_t;
-
-#define WL_STA_VER		2
-
-/* Flags for sta_info_t indicating properties of STA */
-#define WL_STA_BRCM		0x1		/* Running a Broadcom driver */
-#define WL_STA_WME		0x2		/* WMM association */
-#define WL_STA_ABCAP		0x4		/* Afterburner-capable */
-#define WL_STA_AUTHE		0x8		/* Authenticated */
-#define WL_STA_ASSOC		0x10		/* Associated */
-#define WL_STA_AUTHO		0x20		/* Authorized */
-#define WL_STA_WDS		0x40		/* Wireless Distribution System */
-#define WL_STA_WDS_LINKUP	0x80		/* WDS traffic/probes flowing properly */
-#define WL_STA_PS		0x100		/* STA is in power save mode from AP's viewpoint */
-#define WL_STA_APSD_BE		0x200		/* APSD delv/trigger for AC_BE is default enabled */
-#define WL_STA_APSD_BK		0x400		/* APSD delv/trigger for AC_BK is default enabled */
-#define WL_STA_APSD_VI		0x800		/* APSD delv/trigger for AC_VI is default enabled */
-#define WL_STA_APSD_VO		0x1000		/* APSD delv/trigger for AC_VO is default enabled */
-#define WL_STA_N_CAP		0x2000		/* STA 802.11n capable */
-
-#define WL_WDS_LINKUP		WL_STA_WDS_LINKUP	/* deprecated */
-
-/*
- * Country locale determines which channels are available to us.
- */
-typedef enum _wlc_locale {
-	WLC_WW = 0,	/* Worldwide */
-	WLC_THA,	/* Thailand */
-	WLC_ISR,	/* Israel */
-	WLC_JDN,	/* Jordan */
-	WLC_PRC,	/* China */
-	WLC_JPN,	/* Japan */
-	WLC_FCC,	/* USA */
-	WLC_EUR,	/* Europe */
-	WLC_USL,	/* US Low Band only */
-	WLC_JPH,	/* Japan High Band only */
-	WLC_ALL,	/* All the channels in this band */
-	WLC_11D,	/* Represents locale received by 11d beacons */
-	WLC_LAST_LOCALE,
-	WLC_UNDEFINED_LOCALE = 0xf
-} wlc_locale_t;
-
-/* channel encoding */
-typedef struct channel_info {
-	int hw_channel;
-	int target_channel;
-	int scan_channel;
-} channel_info_t;
-
-/* For ioctls that take a list of MAC addresses */
-struct maclist {
-	uint count;			/* number of MAC addresses */
-	struct ether_addr ea[1];	/* variable length array of MAC addresses */
-};
-
-/* get pkt count struct passed through ioctl */
-typedef struct get_pktcnt {
-	uint rx_good_pkt;
-	uint rx_bad_pkt;
-	uint tx_good_pkt;
-	uint tx_bad_pkt;
-} get_pktcnt_t;
-
-/* Linux network driver ioctl encoding */
-typedef struct wl_ioctl {
-	uint cmd;	/* common ioctl definition */
-	void *buf;	/* pointer to user buffer */
-	uint len;	/* length of user buffer */
-	bool set;	/* get or set request (optional) */
-	uint used;	/* bytes read or written (optional) */
-	uint needed;	/* bytes needed (optional) */
-} wl_ioctl_t;
-
-/*
- * Structure for passing hardware and software
- * revision info up from the driver.
- */
-typedef struct wlc_rev_info {
-	uint		vendorid;	/* PCI vendor id */
-	uint		deviceid;	/* device id of chip */
-	uint		radiorev;	/* radio revision */
-	uint		chiprev;	/* chip revision */
-	uint		corerev;	/* core revision */
-	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
-	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
-	uint		boardrev;	/* board revision */
-	uint		driverrev;	/* driver version */
-	uint		ucoderev;	/* microcode version */
-	uint		bus;		/* bus type */
-	uint		chipnum;	/* chip number */
-} wlc_rev_info_t;
-
-#define WL_BRAND_MAX 10
-typedef struct wl_instance_info {
-	uint instance;
-	char brand[WL_BRAND_MAX];
-} wl_instance_info_t;
-
-/* check this magic number */
-#define WLC_IOCTL_MAGIC		0x14e46c77
-
-/* bump this number if you change the ioctl interface */
-#define WLC_IOCTL_VERSION	1
-
-#define	WLC_IOCTL_MAXLEN	8192		/* max length ioctl buffer required */
-#define	WLC_IOCTL_SMLEN		256		/* "small" length ioctl buffer required */
-
-/* common ioctl definitions */
-#define WLC_GET_MAGIC				0
-#define WLC_GET_VERSION				1
-#define WLC_UP					2
-#define WLC_DOWN				3
-#define WLC_DUMP				6
-#define WLC_GET_MSGLEVEL			7
-#define WLC_SET_MSGLEVEL			8
-#define WLC_GET_PROMISC				9
-#define WLC_SET_PROMISC				10
-#define WLC_GET_RATE				12
-/* #define WLC_SET_RATE				13 */ /* no longer supported */
-#define WLC_GET_INSTANCE			14
-/* #define WLC_GET_FRAG				15 */ /* no longer supported */
-/* #define WLC_SET_FRAG				16 */ /* no longer supported */
-/* #define WLC_GET_RTS				17 */ /* no longer supported */
-/* #define WLC_SET_RTS				18 */ /* no longer supported */
-#define WLC_GET_INFRA				19
-#define WLC_SET_INFRA				20
-#define WLC_GET_AUTH				21
-#define WLC_SET_AUTH				22
-#define WLC_GET_BSSID				23
-#define WLC_SET_BSSID				24
-#define WLC_GET_SSID				25
-#define WLC_SET_SSID				26
-#define WLC_RESTART				27
-#define WLC_GET_CHANNEL				29
-#define WLC_SET_CHANNEL				30
-#define WLC_GET_SRL				31
-#define WLC_SET_SRL				32
-#define WLC_GET_LRL				33
-#define WLC_SET_LRL				34
-#define WLC_GET_PLCPHDR				35
-#define WLC_SET_PLCPHDR				36
-#define WLC_GET_RADIO				37
-#define WLC_SET_RADIO				38
-#define WLC_GET_PHYTYPE				39
-/* #define WLC_GET_WEP				42 */ /* no longer supported */
-/* #define WLC_SET_WEP				43 */ /* no longer supported */
-#define WLC_GET_KEY				44
-#define WLC_SET_KEY				45
-#define WLC_GET_REGULATORY			46
-#define WLC_SET_REGULATORY			47
-#define WLC_GET_PASSIVE 			48
-#define WLC_SET_PASSIVE 			49
-#define WLC_SCAN				50
-#define WLC_SCAN_RESULTS			51
-#define WLC_DISASSOC				52
-#define WLC_REASSOC				53
-#define WLC_GET_ROAM_TRIGGER			54
-#define WLC_SET_ROAM_TRIGGER			55
-#define WLC_GET_TXANT				61
-#define WLC_SET_TXANT				62
-#define WLC_GET_ANTDIV				63
-#define WLC_SET_ANTDIV				64
-/* #define WLC_GET_TXPWR			65 */ /* no longer supported */
-/* #define WLC_SET_TXPWR			66 */ /* no longer supported */
-#define WLC_GET_CLOSED				67
-#define WLC_SET_CLOSED				68
-#define WLC_GET_MACLIST				69
-#define WLC_SET_MACLIST				70
-#define WLC_GET_RATESET				71
-#define WLC_SET_RATESET				72
-#define WLC_GET_LOCALE				73
-#define WLC_LONGTRAIN				74
-#define WLC_GET_BCNPRD				75
-#define WLC_SET_BCNPRD				76
-#define WLC_GET_DTIMPRD				77
-#define WLC_SET_DTIMPRD				78
-#define WLC_GET_SROM				79
-#define WLC_SET_SROM				80
-#define WLC_GET_WEP_RESTRICT			81
-#define WLC_SET_WEP_RESTRICT			82
-#define WLC_GET_COUNTRY				83
-#define WLC_SET_COUNTRY				84
-#define WLC_GET_PM				85
-#define WLC_SET_PM				86
-#define WLC_GET_WAKE				87
-#define WLC_SET_WAKE				88
-#define WLC_GET_D11CNTS				89
-#define WLC_GET_FORCELINK			90	/* ndis only */
-#define WLC_SET_FORCELINK			91	/* ndis only */
-#define WLC_FREQ_ACCURACY			92
-#define WLC_CARRIER_SUPPRESS			93
-#define WLC_GET_PHYREG				94
-#define WLC_SET_PHYREG				95
-#define WLC_GET_RADIOREG			96
-#define WLC_SET_RADIOREG			97
-#define WLC_GET_REVINFO				98
-#define WLC_GET_UCANTDIV			99
-#define WLC_SET_UCANTDIV			100
-#define WLC_R_REG				101
-#define WLC_W_REG				102
-#define WLC_DIAG_LOOPBACK			103
-#define WLC_RESET_D11CNTS			104
-#define WLC_GET_MACMODE				105
-#define WLC_SET_MACMODE				106
-#define WLC_GET_MONITOR				107
-#define WLC_SET_MONITOR				108
-#define WLC_GET_GMODE				109
-#define WLC_SET_GMODE				110
-#define WLC_GET_LEGACY_ERP			111
-#define WLC_SET_LEGACY_ERP			112
-#define WLC_GET_RX_ANT				113
-#define WLC_GET_CURR_RATESET			114	/* current rateset */
-#define WLC_GET_SCANSUPPRESS			115
-#define WLC_SET_SCANSUPPRESS			116
-#define WLC_GET_AP				117
-#define WLC_SET_AP				118
-#define WLC_GET_EAP_RESTRICT			119
-#define WLC_SET_EAP_RESTRICT			120
-#define WLC_SCB_AUTHORIZE			121
-#define WLC_SCB_DEAUTHORIZE			122
-#define WLC_GET_WDSLIST				123
-#define WLC_SET_WDSLIST				124
-#define WLC_GET_ATIM				125
-#define WLC_SET_ATIM				126
-#define WLC_GET_RSSI				127
-#define WLC_GET_PHYANTDIV			128
-#define WLC_SET_PHYANTDIV			129
-#define WLC_AP_RX_ONLY				130
-#define WLC_GET_TX_PATH_PWR			131
-#define WLC_SET_TX_PATH_PWR			132
-#define WLC_GET_WSEC				133
-#define WLC_SET_WSEC				134
-#define WLC_GET_PHY_NOISE			135
-#define WLC_GET_BSS_INFO			136
-#define WLC_GET_PKTCNTS				137
-#define WLC_GET_LAZYWDS				138
-#define WLC_SET_LAZYWDS				139
-#define WLC_GET_BANDLIST			140
-#define WLC_GET_BAND				141
-#define WLC_SET_BAND				142
-#define WLC_SCB_DEAUTHENTICATE			143
-#define WLC_GET_SHORTSLOT			144
-#define WLC_GET_SHORTSLOT_OVERRIDE		145
-#define WLC_SET_SHORTSLOT_OVERRIDE		146
-#define WLC_GET_SHORTSLOT_RESTRICT		147
-#define WLC_SET_SHORTSLOT_RESTRICT		148
-#define WLC_GET_GMODE_PROTECTION		149
-#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
-#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
-#define WLC_UPGRADE				152
-/* #define WLC_GET_MRATE			153 */ /* no longer supported */
-/* #define WLC_SET_MRATE			154 */ /* no longer supported */
-#define WLC_GET_ASSOCLIST			159
-#define WLC_GET_CLK				160
-#define WLC_SET_CLK				161
-#define WLC_GET_UP				162
-#define WLC_OUT					163
-#define WLC_GET_WPA_AUTH			164
-#define WLC_SET_WPA_AUTH			165
-#define WLC_GET_PROTECTION_CONTROL		178
-#define WLC_SET_PROTECTION_CONTROL		179
-#define WLC_GET_PHYLIST				180
-#define WLC_GET_KEY_SEQ				183
-/* #define WLC_GET_GMODE_PROTECTION_CTS		198 */ /* no longer supported */
-/* #define WLC_SET_GMODE_PROTECTION_CTS		199 */ /* no longer supported */
-#define WLC_GET_PIOMODE				203
-#define WLC_SET_PIOMODE				204
-#define WLC_SET_LED				209
-#define WLC_GET_LED				210
-#define WLC_GET_CHANNEL_SEL			215
-#define WLC_START_CHANNEL_SEL			216
-#define WLC_GET_VALID_CHANNELS			217
-#define WLC_GET_FAKEFRAG			218
-#define WLC_SET_FAKEFRAG			219
-#define WLC_GET_WET				230
-#define WLC_SET_WET				231
-#define WLC_GET_KEY_PRIMARY			235
-#define WLC_SET_KEY_PRIMARY			236
-#define WLC_GET_RADAR				242
-#define WLC_SET_RADAR				243
-#define WLC_SET_SPECT_MANAGMENT			244
-#define WLC_GET_SPECT_MANAGMENT			245
-#define WLC_WDS_GET_REMOTE_HWADDR		246	/* handled in wl_linux.c/wl_vx.c */
-#define WLC_SET_CS_SCAN_TIMER			248
-#define WLC_GET_CS_SCAN_TIMER			249
-#define WLC_SEND_PWR_CONSTRAINT			254
-#define WLC_CURRENT_PWR				256
-#define WLC_GET_CHANNELS_IN_COUNTRY		260
-#define WLC_GET_COUNTRY_LIST			261
-#define WLC_GET_VAR				262	/* get value of named variable */
-#define WLC_SET_VAR				263	/* set named variable to value */
-#define WLC_NVRAM_GET				264	/* deprecated */
-#define WLC_NVRAM_SET				265
-#define WLC_SET_WSEC_PMK			268
-#define WLC_GET_AUTH_MODE			269
-#define WLC_SET_AUTH_MODE			270
-#define WLC_NDCONFIG_ITEM			273	/* currently handled in wl_oid.c */
-#define WLC_NVOTPW				274
-#define WLC_OTPW				275
-#define WLC_SET_LOCALE				278
-#define WLC_LAST				279	/* do not change - use get_var/set_var */
-
-/*
- * Minor kludge alert:
- * Duplicate a few definitions that irelay requires from epiioctl.h here
- * so caller doesn't have to include this file and epiioctl.h .
- * If this grows any more, it would be time to move these irelay-specific
- * definitions out of the epiioctl.h and into a separate driver common file.
- */
-#ifndef EPICTRL_COOKIE
-#define EPICTRL_COOKIE		0xABADCEDE
-#endif
-
-/* vx wlc ioctl's offset */
-#define CMN_IOCTL_OFF 0x180
-
-/*
- * custom OID support
- *
- * 0xFF - implementation specific OID
- * 0xE4 - first byte of Broadcom PCI vendor ID
- * 0x14 - second byte of Broadcom PCI vendor ID
- * 0xXX - the custom OID number
- */
-
-/* begin 0x1f values beyond the start of the ET driver range. */
-#define WL_OID_BASE		0xFFE41420
-
-/* NDIS overrides */
-#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
-#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
-
-#define WL_DECRYPT_STATUS_SUCCESS	1
-#define WL_DECRYPT_STATUS_FAILURE	2
-#define WL_DECRYPT_STATUS_UNKNOWN	3
-
-/* allows user-mode app to poll the status of USB image upgrade */
-#define WLC_UPGRADE_SUCCESS			0
-#define WLC_UPGRADE_PENDING			1
-
-#ifdef CONFIG_USBRNDIS_RETAIL
-/* struct passed in for WLC_NDCONFIG_ITEM */
-typedef struct {
-	char *name;
-	void *param;
-} ndconfig_item_t;
-#endif
-
-/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-#define WL_RADIO_SW_DISABLE		(1<<0)
-#define WL_RADIO_HW_DISABLE		(1<<1)
-#define WL_RADIO_MPC_DISABLE		(1<<2)
-#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any channel */
-
-/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
-#define WL_TXPWR_OVERRIDE	(1<<31)
-
-/* "diag" iovar argument and error code */
-#define WL_DIAG_INTERRUPT			1	/* d11 loopback interrupt test */
-#define WL_DIAG_MEMORY				3	/* d11 memory test */
-#define WL_DIAG_LED				4	/* LED test */
-#define WL_DIAG_REG				5	/* d11/phy register test */
-#define WL_DIAG_SROM				6	/* srom read/crc test */
-#define WL_DIAG_DMA				7	/* DMA test */
-
-#define WL_DIAGERR_SUCCESS			0
-#define WL_DIAGERR_FAIL_TO_RUN			1	/* unable to run requested diag */
-#define WL_DIAGERR_NOT_SUPPORTED		2	/* diag requested is not supported */
-#define WL_DIAGERR_INTERRUPT_FAIL		3	/* loopback interrupt test failed */
-#define WL_DIAGERR_LOOPBACK_FAIL		4	/* loopback data test failed */
-#define WL_DIAGERR_SROM_FAIL			5	/* srom read failed */
-#define WL_DIAGERR_SROM_BADCRC			6	/* srom crc failed */
-#define WL_DIAGERR_REG_FAIL			7	/* d11/phy register test failed */
-#define WL_DIAGERR_MEMORY_FAIL			8	/* d11 memory test failed */
-#define WL_DIAGERR_NOMEM			9	/* diag test failed due to no memory */
-#define WL_DIAGERR_DMA_FAIL			10	/* DMA test failed */
-
-/* band types */
-#define	WLC_BAND_AUTO		0	/* auto-select */
-#define	WLC_BAND_5G		1	/* 5 Ghz */
-#define	WLC_BAND_2G		2	/* 2.4 Ghz */
-#define	WLC_BAND_ALL		3	/* all bands */
-
-/* phy types (returned by WLC_GET_PHYTPE) */
-#define	WLC_PHY_TYPE_A		0
-#define	WLC_PHY_TYPE_B		1
-#define	WLC_PHY_TYPE_G		2
-#define	WLC_PHY_TYPE_N		4
-#define	WLC_PHY_TYPE_NULL	0xf
-
-/* MAC list modes */
-#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
-#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
-#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */
-
-/*
- *
- */
-#define GMODE_LEGACY_B		0
-#define GMODE_AUTO		1
-#define GMODE_ONLY		2
-#define GMODE_B_DEFERRED	3
-#define GMODE_PERFORMANCE	4
-#define GMODE_LRS		5
-#define GMODE_MAX		6
-
-/* values for PLCPHdr_override */
-#define WLC_PLCP_AUTO	-1
-#define WLC_PLCP_SHORT	0
-#define WLC_PLCP_LONG	1
-
-/* values for g_protection_override and n_protection_override */
-#define WLC_PROTECTION_AUTO		-1
-#define WLC_PROTECTION_OFF		0
-#define WLC_PROTECTION_ON		1
-
-/* values for g_protection_control and n_protection_control */
-#define WLC_PROTECTION_CTL_OFF		0
-#define WLC_PROTECTION_CTL_LOCAL	1
-#define WLC_PROTECTION_CTL_OVERLAP	2
-
-/* deprecated const names for g_protection_override */
-#define WLC_G_PROTECTION_AUTO		WLC_PROTECTION_AUTO
-#define WLC_G_PROTECTION_OFF		WLC_PROTECTION_OFF
-#define WLC_G_PROTECTION_ON		WLC_PROTECTION_ON
-
-/* deprecated const names for g_protection_control */
-#define WLC_G_PROTECTION_CTL_OFF	WLC_PROTECTION_CTL_OFF
-#define WLC_G_PROTECTION_CTL_LOCAL	WLC_PROTECTION_CTL_LOCAL
-#define WLC_G_PROTECTION_CTL_OVERLAP	WLC_PROTECTION_CTL_OVERLAP
-
-/* deprecated const names for get/set g_protection_control */
-#define WLC_GET_GMODE_PROTECTION_CONTROL	WLC_GET_PROTECTION_CONTROL
-#define WLC_SET_GMODE_PROTECTION_CONTROL	WLC_SET_PROTECTION_CONTROL
-
-/* values for n_protection */
-#define WLC_N_PROTECTION_OFF		0
-#define WLC_N_PROTECTION_MIXEDMODE	1
-#define WLC_N_PROTECTION_CTS		2
-
-/* values for n_preamble_type */
-#define WLC_N_PREAMBLE_MIXEDMODE	0
-#define WLC_N_PREAMBLE_GF		1
-
-/* Values for PM */
-#define PM_OFF	0
-#define PM_MAX	1
-#define PM_FAST 2
-
-
-
-typedef struct {
-	int npulses; 	/* required number of pulses at n * t_int */
-	int ncontig; 	/* required number of pulses at t_int */
-	int min_pw; 	/* minimum pulse width (20 MHz clocks) */
-	int max_pw; 	/* maximum pulse width (20 MHz clocks) */
-	uint16 thresh0;	/* Radar detection, thresh 0 */
-	uint16 thresh1;	/* Radar detection, thresh 1 */
-	int npulses_lp;  /* Radar detection, minimum long pulses */
-	int min_pw_lp; /* Minimum pulsewidth for long pulses */
-	int max_pw_lp; /* Maximum pulsewidth for long pulses */
-	int min_fm_lp; /* Minimum fm for long pulses */
-	int max_deltat_lp;  /* Maximum deltat for long pulses */
-	int min_deltat; /* Minimum spacing between pulses */
-} wl_radar_args_t;
-
-/* radar iovar SET defines */
-#define WL_RADAR_DETECTOR_OFF		0	/* radar detector off */
-#define WL_RADAR_DETECTOR_ON		1	/* radar detector on */
-#define WL_RADAR_SIMULATED		2	/* force radar detector to declare
-						 * detection once
-						 */
-
-/* dfs_status iovar-related defines */
-
-/* cac - channel availability check,
- * ism - in-service monitoring
- * csa - channel switching announcement
- */
-
-/* cac state values */
-#define WL_DFS_CACSTATE_IDLE		0	/* state for operating in non-radar channel */
-#define	WL_DFS_CACSTATE_PREISM_CAC	1	/* CAC in progress */
-#define WL_DFS_CACSTATE_ISM		2	/* ISM in progress */
-#define WL_DFS_CACSTATE_CSA		3	/* csa */
-#define WL_DFS_CACSTATE_POSTISM_CAC	4	/* ISM CAC */
-#define WL_DFS_CACSTATE_PREISM_OOC	5	/* PREISM OOC */
-#define WL_DFS_CACSTATE_POSTISM_OOC	6	/* POSTISM OOC */
-#define WL_DFS_CACSTATES		7	/* this many states exist */
-
-/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
-typedef struct {
-	uint state;		/* noted by WL_DFS_CACSTATE_XX. */
-	uint duration;		/* time spent in ms in state. */
-	/* as dfs enters ISM state, it removes the operational channel from quiet channel
-	 * list and notes the channel in channel_cleared. set to 0 if no channel is cleared
-	 */
-	chanspec_t chanspec_cleared;
-	/* chanspec cleared used to be a uint, add another to uint16 to maintain size */
-	uint16 pad;
-} wl_dfs_status_t;
-
-#define NUM_PWRCTRL_RATES 12
-
-typedef struct tx_inst_power {
-} tx_inst_power_t;
-
-
-/* regulatory enforcement levels */
-#define SPECT_MNGMT_OFF			0		/* both 11h and 11d disabled */
-#define SPECT_MNGMT_LOOSE_11H		1		/* allow non-11h APs in scan lists */
-#define SPECT_MNGMT_STRICT_11H		2		/* prune out non-11h APs from scan list */
-#define SPECT_MNGMT_STRICT_11D		3		/* switch to 802.11D mode */
-/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
- * adoption is done irregardless of capability-spectrum_management
- */
-#define SPECT_MNGMT_LOOSE_11H_D		4		/* operation defined above */
-
-#define WL_CHAN_VALID_HW	(1 << 0)	/* valid with current HW */
-#define WL_CHAN_VALID_SW	(1 << 1)	/* valid with current country setting */
-#define WL_CHAN_BAND_5G		(1 << 2)	/* 5GHz-band channel */
-#define WL_CHAN_RADAR		(1 << 3)	/* radar sensitive  channel */
-#define WL_CHAN_INACTIVE	(1 << 4)	/* temporarily inactive due to radar */
-#define WL_CHAN_PASSIVE		(1 << 5)	/* channel is in passive mode */
-#define WL_CHAN_RESTRICTED	(1 << 6)	/* restricted use channel */
-
-/* BTC mode used by "btc_mode" iovar */
-#define	WL_BTC_DISABLE		0	/* disable BT coexistance */
-#define WL_BTC_ENABLE		1	/* enable BT coexistance */
-#define WL_BTC_PREMPT		2	/* enable BT coexistance and BT pre-emption */
-
-#define WL_MPC_VAL		0x00400000
-#define WL_APSTA_VAL		0x00800000
-#define WL_DFS_VAL		0x01000000
-#define WL_BA_VAL		0x02000000
-#define WL_NITRO_VAL		0x04000000
-#define WL_CAC_VAL		0x08000000
-#define WL_AMSDU_VAL		0x10000000
-#define WL_AMPDU_VAL		0x20000000
-
-/* max # of leds supported by GPIO (gpio pin# == led index#) */
-#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
-
-/* led per-pin behaviors */
-#define	WL_LED_OFF		0		/* always off */
-#define	WL_LED_ON		1		/* always on */
-#define	WL_LED_ACTIVITY		2		/* activity */
-#define	WL_LED_RADIO		3		/* radio enabled */
-#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
-#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
-#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
-#define	WL_LED_WI1		7		
-#define	WL_LED_WI2		8		
-#define	WL_LED_WI3		9		
-#define	WL_LED_ASSOC		10		/* associated state indicator */
-#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
-#define	WL_LED_NUMBEHAVIOR	12
-
-/* led behavior numeric value format */
-#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
-#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
-
-/* max # of channels returnd by the get valid channels iovar */
-#define WL_NUMCHANSPECS		100
-
-/* WDS link local endpoint WPA role */
-#define WL_WDS_WPA_ROLE_AUTH	0	/* authenticator */
-#define WL_WDS_WPA_ROLE_SUP	1	/* supplicant */
-#define WL_WDS_WPA_ROLE_AUTO	255	/* auto, based on mac addr value */
-
-/* number of bytes needed to define a 128-bit mask for MAC event reporting */
-#define WL_EVENTING_MASK_LEN	16
-
-/* Structures and constants used for "vndr_ie" IOVar interface */
-#define VNDR_IE_CMD_LEN		4	/* length of the set command string:
-					 * "add", "del" (+ NULL)
-					 */
-
-/* 802.11 Mgmt Packet flags */
-#define VNDR_IE_BEACON_FLAG	0x1
-#define VNDR_IE_PRBRSP_FLAG	0x2
-#define VNDR_IE_ASSOCRSP_FLAG	0x4
-#define VNDR_IE_AUTHRSP_FLAG	0x8
-
-#define VNDR_IE_INFO_HDR_LEN	(sizeof(uint32))
-
-typedef struct {
-	uint32 pktflag;			/* bitmask indicating which packet(s) contain this IE */
-	vndr_ie_t vndr_ie_data;		/* vendor IE data */
-} vndr_ie_info_t;
-
-typedef struct {
-	int iecount;			/* number of entries in the vndr_ie_list[] array */
-	vndr_ie_info_t vndr_ie_list[1];	/* variable size list of vndr_ie_info_t structs */
-} vndr_ie_buf_t;
-
-typedef struct {
-	char cmd[VNDR_IE_CMD_LEN];	/* vndr_ie IOVar set command : "add", "del" + NULL */
-	vndr_ie_buf_t vndr_ie_buffer;	/* buffer containing Vendor IE list information */
-} vndr_ie_setbuf_t;
-
-/* join target preference types */
-#define WL_JOIN_PREF_RSSI	1	/* by RSSI, mandatory */
-#define WL_JOIN_PREF_WPA	2	/* by akm and ciphers, optional, RSN and WPA as values */
-#define WL_JOIN_PREF_BAND	3	/* by 802.11 band, optional, WLC_BAND_XXXX as values */
-
-/* band preference */
-#define WLJP_BAND_ASSOC_PREF	255	/* use assoc preference settings */
-					/* others use WLC_BAND_XXXX as values */
-
-/* any multicast cipher suite */
-#define WL_WPA_ACP_MCS_ANY	"\x00\x00\x00\x00"
-
-struct tsinfo_arg {
-	uint8 octets[3];
-};
-
-#if !defined(__GNUC__)
-#pragma pack(pop)
-#endif
-
-#define	NFIFO			6	/* # tx/rx fifopairs */
-
-#define	WL_CNT_T_VERSION	1	/* current version of wl_cnt_t struct */
-
-typedef struct {
-	uint16	version;	/* see definition of WL_CNT_T_VERSION */
-	uint16	length;		/* length of entire structure */
-
-	/* transmit stat counters */
-	uint32	txframe;	/* tx data frames */
-	uint32	txbyte;		/* tx data bytes */
-	uint32	txretrans;	/* tx mac retransmits */
-	uint32	txerror;	/* tx data errors (derived: sum of others) */
-	uint32	txctl;		/* tx management frames */
-	uint32	txprshort;	/* tx short preamble frames */
-	uint32	txserr;		/* tx status errors */
-	uint32	txnobuf;	/* tx out of buffers errors */
-	uint32	txnoassoc;	/* tx discard because we're not associated */
-	uint32	txrunt;		/* tx runt frames */
-	uint32	txchit;		/* tx header cache hit (fastpath) */
-	uint32	txcmiss;	/* tx header cache miss (slowpath) */
-
-	/* transmit chip error counters */
-	uint32	txuflo;		/* tx fifo underflows */
-	uint32	txphyerr;	/* tx phy errors (indicated in tx status) */
-	uint32	txphycrs;	
-
-	/* receive stat counters */
-	uint32	rxframe;	/* rx data frames */
-	uint32	rxbyte;		/* rx data bytes */
-	uint32	rxerror;	/* rx data errors (derived: sum of others) */
-	uint32	rxctl;		/* rx management frames */
-	uint32	rxnobuf;	/* rx out of buffers errors */
-	uint32	rxnondata;	/* rx non data frames in the data channel errors */
-	uint32	rxbadds;	/* rx bad DS errors */
-	uint32	rxbadcm;	/* rx bad control or management frames */
-	uint32	rxfragerr;	/* rx fragmentation errors */
-	uint32	rxrunt;		/* rx runt frames */
-	uint32	rxgiant;	/* rx giant frames */
-	uint32	rxnoscb;	/* rx no scb error */
-	uint32	rxbadproto;	/* rx invalid frames */
-	uint32	rxbadsrcmac;	/* rx frames with Invalid Src Mac */
-	uint32	rxbadda;	/* rx frames tossed for invalid da */
-	uint32	rxfilter;	/* rx frames filtered out */
-
-	/* receive chip error counters */
-	uint32	rxoflo;		/* rx fifo overflow errors */
-	uint32	rxuflo[NFIFO];	/* rx dma descriptor underflow errors */
-
-	uint32	d11cnt_txrts_off;	/* d11cnt txrts value when reset d11cnt */
-	uint32	d11cnt_rxcrc_off;	/* d11cnt rxcrc value when reset d11cnt */
-	uint32	d11cnt_txnocts_off;	/* d11cnt txnocts value when reset d11cnt */
-
-	/* misc counters */
-	uint32	dmade;		/* tx/rx dma descriptor errors */
-	uint32	dmada;		/* tx/rx dma data errors */
-	uint32	dmape;		/* tx/rx dma descriptor protocol errors */
-	uint32	reset;		/* reset count */
-	uint32	tbtt;		/* cnts the TBTT int's */
-	uint32	txdmawar;	
-	uint32	pkt_callback_reg_fail;	/* callbacks register failure */
-
-	/* MAC counters: 32-bit version of d11.h's macstat_t */
-	uint32	txallfrm;	/* total number of frames sent, incl. Data, ACK, RTS, CTS,
-				 * Control Management (includes retransmissions)
-				 */
-	uint32	txrtsfrm;	/* number of RTS sent out by the MAC */
-	uint32	txctsfrm;	/* number of CTS sent out by the MAC */
-	uint32	txackfrm;	/* number of ACK frames sent out */
-	uint32	txdnlfrm;	/* Not used */
-	uint32	txbcnfrm;	/* beacons transmitted */
-	uint32	txfunfl[8];	/* per-fifo tx underflows */
-	uint32	txtplunfl;	/* Template underflows (mac was too slow to transmit ACK/CTS
-				 * or BCN)
-				 */
-	uint32	txphyerror;	/* Transmit phy error, type of error is reported in tx-status for
-				 * driver enqueued frames
-				 */
-	uint32	rxfrmtoolong;	/* Received frame longer than legal limit (2346 bytes) */
-	uint32	rxfrmtooshrt;	/* Received frame did not contain enough bytes for its frame type */
-	uint32	rxinvmachdr;	/* Either the protocol version != 0 or frame type not
-				 * data/control/management
-				 */
-	uint32	rxbadfcs;	/* number of frames for which the CRC check failed in the MAC */
-	uint32	rxbadplcp;	/* parity check of the PLCP header failed */
-	uint32	rxcrsglitch;	/* PHY was able to correlate the preamble but not the header */
-	uint32	rxstrt;		/* Number of received frames with a good PLCP
-				 * (i.e. passing parity check)
-				 */
-	uint32	rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
-	uint32	rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
-	uint32	rxcfrmucast;	/* number of received CNTRL frames with good FCS and matching RA */
-	uint32	rxrtsucast;	/* number of unicast RTS addressed to the MAC (good FCS) */
-	uint32	rxctsucast;	/* number of unicast CTS addressed to the MAC (good FCS) */
-	uint32	rxackucast;	/* number of ucast ACKS received (good FCS) */
-	uint32	rxdfrmocast;	/* number of received DATA frames (good FCS and not matching RA) */
-	uint32	rxmfrmocast;	/* number of received MGMT frames (good FCS and not matching RA) */
-	uint32	rxcfrmocast;	/* number of received CNTRL frame (good FCS and not matching RA) */
-	uint32	rxrtsocast;	/* number of received RTS not addressed to the MAC */
-	uint32	rxctsocast;	/* number of received CTS not addressed to the MAC */
-	uint32	rxdfrmmcast;	/* number of RX Data multicast frames received by the MAC */
-	uint32	rxmfrmmcast;	/* number of RX Management multicast frames received by the MAC */
-	uint32	rxcfrmmcast;	/* number of RX Control multicast frames received by the MAC
-				 * (unlikely to see these)
-				 */
-	uint32	rxbeaconmbss;	/* beacons received from member of BSS */
-	uint32	rxdfrmucastobss; /* number of unicast frames addressed to the MAC from
-				  * other BSS (WDS FRAME)
-				  */
-	uint32	rxbeaconobss;	/* beacons received from other BSS */
-	uint32	rxrsptmout;	/* Number of response timeouts for transmitted frames
-				 * expecting a response
-				 */
-	uint32	bcntxcancl;	/* transmit beacons canceled due to receipt of beacon (IBSS) */
-	uint32	rxf0ovfl;	/* Number of receive fifo 0 overflows */
-	uint32	rxf1ovfl;	/* Number of receive fifo 1 overflows (obsolete) */
-	uint32	rxf2ovfl;	/* Number of receive fifo 2 overflows (obsolete) */
-	uint32	txsfovfl;	/* Number of transmit status fifo overflows (obsolete) */
-	uint32	pmqovfl;	/* Number of PMQ overflows */
-	uint32	rxcgprqfrm;	/* Number of received Probe requests that made it into
-				 * the PRQ fifo
-				 */
-	uint32	rxcgprsqovfl;	/* Rx Probe Request Que overflow in the AP */
-	uint32	txcgprsfail;	/* Tx Probe Response Fail. AP sent probe response but did
-				 * not get ACK
-				 */
-	uint32	txcgprssuc;	/* Tx Probe Response Success (ACK was received) */
-	uint32	prs_timeout;	/* Number of probe requests that were dropped from the PRQ
-				 * fifo because a probe response could not be sent out within
-				 * the time limit defined in M_PRS_MAXTIME
-				 */
-	uint32	rxnack;		/* Number of NACKS received (Afterburner) */
-	uint32	frmscons;	/* Number of frames completed without transmission because of an
-				 * Afterburner re-queue
-				 */
-	uint32	txnack;		/* Number of NACKs transmitted (Afterburner) */
-	uint32	txglitch_nack;	/* obsolete */
-	uint32	txburst;	/* obsolete */
-
-	/* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
-	uint32	txfrag;		/* dot11TransmittedFragmentCount */
-	uint32	txmulti;	/* dot11MulticastTransmittedFrameCount */
-	uint32	txfail;		/* dot11FailedCount */
-	uint32	txretry;	/* dot11RetryCount */
-	uint32	txretrie;	/* dot11MultipleRetryCount */
-	uint32	rxdup;		/* dot11FrameduplicateCount */
-	uint32	txrts;		/* dot11RTSSuccessCount */
-	uint32	txnocts;	/* dot11RTSFailureCount */
-	uint32	txnoack;	/* dot11ACKFailureCount */
-	uint32	rxfrag;		/* dot11ReceivedFragmentCount */
-	uint32	rxmulti;	/* dot11MulticastReceivedFrameCount */
-	uint32	rxcrc;		/* dot11FCSErrorCount */
-	uint32	txfrmsnt;	/* dot11TransmittedFrameCount (bogus MIB?) */
-	uint32	rxundec;	/* dot11WEPUndecryptableCount */
-
-	/* WPA2 counters (see rxundec for DecryptFailureCount) */
-	uint32	tkipmicfaill;	/* TKIPLocalMICFailures */
-	uint32	tkipcntrmsr;	/* TKIPCounterMeasuresInvoked */
-	uint32	tkipreplay;	/* TKIPReplays */
-	uint32	ccmpfmterr;	/* CCMPFormatErrors */
-	uint32	ccmpreplay;	/* CCMPReplays */
-	uint32	ccmpundec;	/* CCMPDecryptErrors */
-	uint32	fourwayfail;	/* FourWayHandshakeFailures */
-	uint32	wepundec;	/* dot11WEPUndecryptableCount */
-	uint32	wepicverr;	/* dot11WEPICVErrorCount */
-	uint32	decsuccess;	/* DecryptSuccessCount */
-	uint32	tkipicverr;	/* TKIPICVErrorCount */
-	uint32	wepexcluded;	/* dot11WEPExcludedCount */
-
-	uint32	txchanrej;	/* Tx frames suppressed due to channel rejection */
-	uint32	psmwds;		/* Count PSM watchdogs */
-	uint32	phywatchdog;	/* Count Phy lockups */
-} wl_cnt_t;
-
-#define WL_WME_CNT_VERSION	1	/* current version of wl_wme_cnt_t */
-
-typedef struct {
-	uint32 packets;
-	uint32 bytes;
-} wl_traffic_stats_t;
-
-typedef struct {
-	uint16	version;	/* see definition of WL_CNT_T_VERSION */
-	uint16	length;		/* length of entire structure */
-
-	wl_traffic_stats_t tx[AC_COUNT];	/* Packets transmitted */
-	wl_traffic_stats_t tx_failed[AC_COUNT];	/* Packets dropped or failed to transmit */
-	wl_traffic_stats_t rx[AC_COUNT];	/* Packets received */
-	wl_traffic_stats_t rx_failed[AC_COUNT];	/* Packets failed to receive */
-
-	wl_traffic_stats_t forward[AC_COUNT];	/* Packets forwarded by AP */
-
-	wl_traffic_stats_t tx_expired[AC_COUNT];	/* packets dropped due to lifetime expiry */
-
-} wl_wme_cnt_t;
-
-#ifdef WLBA
-
-#define	WLC_BA_CNT_VERSION	1	/* current version of wlc_ba_cnt_t */
-
-/* block ack related stats */
-typedef struct wlc_ba_cnt {
-	uint16	version;	/* WLC_BA_CNT_VERSION */
-	uint16	length;		/* length of entire structure */
-
-	/* transmit stat counters */
-	uint32 txpdu;		/* pdus sent */
-	uint32 txsdu;		/* sdus sent */
-	uint32 txfc;		/* tx side flow controlled packets */
-	uint32 txfci;		/* tx side flow control initiated */
-	uint32 txretrans;	/* retransmitted pdus */
-	uint32 txbatimer;	/* ba resend due to timer */
-	uint32 txdrop;		/* dropped packets */
-	uint32 txaddbareq;	/* addba req sent */
-	uint32 txaddbaresp;	/* addba resp sent */
-	uint32 txdelba;		/* delba sent */
-	uint32 txba;		/* ba sent */
-	uint32 txbar;		/* bar sent */
-	uint32 txpad[4];	/* future */
-
-	/* receive side counters */
-	uint32 rxpdu;		/* pdus recd */
-	uint32 rxqed;		/* pdus buffered before sending up */
-	uint32 rxdup;		/* duplicate pdus */
-	uint32 rxnobuf;		/* pdus discarded due to no buf */
-	uint32 rxaddbareq;	/* addba req recd */
-	uint32 rxaddbaresp;	/* addba resp recd */
-	uint32 rxdelba;		/* delba recd */
-	uint32 rxba;		/* ba recd */
-	uint32 rxbar;		/* bar recd */
-	uint32 rxinvba;		/* invalid ba recd */
-	uint32 rxbaholes;	/* ba recd with holes */
-	uint32 rxunexp;		/* unexpected packets */
-	uint32 rxpad[4];	/* future */
-} wlc_ba_cnt_t;
-#endif /* WLBA */
-
-/* structure for per-tid ampdu control */
-struct ampdu_tid_control {
-	uint8 tid;			/* tid */
-	uint8 enable;			/* enable/disable */
-};
-
-/* structure for addts arguments */
-/* For ioctls that take a list of TSPEC */
-struct tslist {
-	int count;			/* number of tspecs */
-	struct tsinfo_arg tsinfo[1];	/* variable length array of tsinfo */
-};
-
-/* structure for addts/delts arguments */
-typedef struct tspec_arg {
-	uint16 version;			/* see definition of TSPEC_ARG_VERSION */
-	uint16 length;			/* length of entire structure */
-	uint flag;			/* bit field */
-	/* TSPEC Arguments */
-	struct tsinfo_arg tsinfo;	/* TS Info bit field */
-	uint16 nom_msdu_size;		/* (Nominal or fixed) MSDU Size (bytes) */
-	uint16 max_msdu_size;		/* Maximum MSDU Size (bytes) */
-	uint min_srv_interval;		/* Minimum Service Interval (us) */
-	uint max_srv_interval;		/* Maximum Service Interval (us) */
-	uint inactivity_interval;	/* Inactivity Interval (us) */
-	uint suspension_interval;	/* Suspension Interval (us) */
-	uint srv_start_time;		/* Service Start Time (us) */
-	uint min_data_rate;		/* Minimum Data Rate (bps) */
-	uint mean_data_rate;		/* Mean Data Rate (bps) */
-	uint peak_data_rate;		/* Peak Data Rate (bps) */
-	uint max_burst_size;		/* Maximum Burst Size (bytes) */
-	uint delay_bound;		/* Delay Bound (us) */
-	uint min_phy_rate;		/* Minimum PHY Rate (bps) */
-	uint16 surplus_bw;		/* Surplus Bandwidth Allowance Factor */
-	uint16 medium_time;		/* Medium Time (32 us/s periods) */
-} tspec_arg_t;
-
-/* current version of wl_tspec_arg_t struct */
-#define	TSPEC_ARG_VERSION	1	/* current version of wl_tspec_arg_t struct */
-#define TSPEC_ARG_LENGTH	55	/* argment length from tsinfo to medium_time */
-
-/* define for flag */
-#define TSPEC_PENDING		0	/* TSPEC pending */
-#define TSPEC_ACCEPTED		1	/* TSPEC accepted */
-#define TSPEC_REJECTED		2	/* TSPEC rejected */
-#define TSPEC_UNKNOWN		3	/* TSPEC unknown */
-#define TSPEC_STATUS_MASK	7	/* TSPEC status mask */
-
-
-/* Software feature flag defines used by wlfeatureflag */
-#define WL_SWFL_ABBFL		0x0001 /* Allow Afterburner on systems w/o hardware BFL */
-#define WL_SWFL_ABENCORE	0x0002 /* Allow AB on non-4318E chips */
-
-#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
-
-/* Packet lifetime configuration per ac */
-typedef struct wl_lifetime {
-	uint32 ac;	        /* access class */
-	uint32 lifetime;    /* Packet lifetime value in ms */
-} wl_lifetime_t;
-
-#endif /* _wlioctl_h_ */
diff --git a/package/broadcom-wl/src/wlc/include/wlutils.h b/package/broadcom-wl/src/wlc/include/wlutils.h
deleted file mode 100644
index a5aa1fd663..0000000000
--- a/package/broadcom-wl/src/wlc/include/wlutils.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Broadcom wireless network adapter utility functions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id: wlutils.h,v 1.1.1.12 2006/02/27 03:43:20 honor Exp $
- */
-
-#ifndef _wlutils_h_
-#define _wlutils_h_
-
-#include <typedefs.h>
-#include <wlioctl.h>
-
-/*
- * Pass a wlioctl request to the specified interface.
- * @param	name	interface name
- * @param	cmd	WLC_GET_MAGIC <= cmd < WLC_LAST
- * @param	buf	buffer for passing in and/or receiving data
- * @param	len	length of buf
- * @return	>= 0 if successful or < 0 otherwise
- */
-extern int wl_ioctl(char *name, int cmd, void *buf, int len);
-
-/*
- * Probe the specified interface.
- * @param	name	interface name
- * @return	>= 0 if a Broadcom wireless device or < 0 otherwise
- */
-extern int wl_probe(char *name);
-
-extern int wl_iovar_set(char *ifname, char *iovar, void *param, int paramlen);
-extern int wl_iovar_get(char *ifname, char *iovar, void *bufptr, int buflen);
-/*
- * Set/Get named variable.
- * @param	ifname		interface name
- * @param	iovar		variable name
- * @param	param		input param value/buffer
- * @param	paramlen	input param value/buffer length
- * @param	bufptr		io buffer
- * @param	buflen		io buffer length
- * @param	val		val or val pointer for int routines
- * @return	success == 0, failure != 0
- */
-/*
- * set named driver variable to int value
- * calling example: wl_iovar_setint(ifname, "arate", rate)
-*/
-static inline int
-wl_iovar_setint(char *ifname, char *iovar, int val)
-{
-	return wl_iovar_set(ifname, iovar, &val, sizeof(val));
-}
-
-/*
- * get named driver variable to int value and return error indication
- * calling example: wl_iovar_getint(ifname, "arate", &rate)
- */
-static inline int
-wl_iovar_getint(char *ifname, char *iovar, int *val)
-{
-	return wl_iovar_get(ifname, iovar, val, sizeof(int));
-}
-
-/*
- * Set/Get named variable indexed by BSS Configuration
- * @param	ifname		interface name
- * @param	iovar		variable name
- * @param	bssidx		bsscfg index
- * @param	param		input param value/buffer
- * @param	paramlen	input param value/buffer length
- * @param	bufptr		io buffer
- * @param	buflen		io buffer length
- * @param	val		val or val pointer for int routines
- * @return	success == 0, failure != 0
- */
-extern int wl_bssiovar_get(char *ifname, char *iovar, int bssidx, void *outbuf, int len);
-extern int wl_bssiovar_set(char *ifname, char *iovar, int bssidx, void *param, int paramlen);
-/*
- * set named & bss indexed driver variable to int value
- */
-static inline int
-wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val)
-{
-	return wl_bssiovar_set(ifname, iovar, bssidx, &val, sizeof(int));
-}
-
-static inline int
-wl_bssiovar_getint(char *ifname, char *iovar, int bssidx, int *val)
-{
-	return wl_bssiovar_get(ifname, iovar, bssidx, val, sizeof(int));
-}
-
-extern int wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val);
-
-#endif /* _wlutils_h_ */