remove the old broadcom wl driver for linux 2.4

SVN-Revision: 21947

1 files changed, 0 insertions, 165 deletions

diff --git a/package/broadcom-wl-old/src/driver/proto/bcmevent.h b/package/broadcom-wl-old/src/driver/proto/bcmevent.h
deleted file mode 100644
index 6c46beb7cd..0000000000
--- a/package/broadcom-wl-old/src/driver/proto/bcmevent.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Broadcom Event  protocol definitions
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- *
- * Dependencies: proto/bcmeth.h
- *
- *
- */
-
-/*
- * Broadcom Ethernet Events protocol defines
- *
- */
-
-#ifndef _BCMEVENT_H_
-#define _BCMEVENT_H_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define	PACKED	__attribute__((packed))
-#else
-#pragma pack(1)
-#define	PACKED
-#endif /* defined(__GNUC__) */
-
-#define BCM_EVENT_MSG_VERSION		1	/* wl_event_msg_t struct version */
-#define BCM_MSG_IFNAME_MAX		16	/* max length of interface name */
-
-/* flags */
-#define WLC_EVENT_MSG_LINK		0x01	/* link is up */
-#define WLC_EVENT_MSG_FLUSHTXQ		0x02	/* flush tx queue on MIC error */
-#define WLC_EVENT_MSG_GROUP		0x04	/* group MIC error */
-
-/* these fields are stored in network order */
-typedef struct
-{
-	uint16	version;
-	uint16	flags;			/* see flags below */
-	uint32	event_type;		/* Message (see below) */
-	uint32	status;			/* Status code (see below) */
-	uint32	reason;			/* Reason code (if applicable) */
-	uint32	auth_type;		/* WLC_E_AUTH */
-	uint32	datalen;		/* data buf */
-	struct ether_addr	addr;	/* Station address (if applicable) */
-	char	ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
-} PACKED wl_event_msg_t;
-
-/* used by driver msgs */
-typedef struct bcm_event {
-	struct ether_header eth;
-	bcmeth_hdr_t		bcm_hdr;
-	wl_event_msg_t		event;
-	/* data portion follows */
-} PACKED bcm_event_t;
-
-#define BCM_MSG_LEN	(sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
-
-/* Event messages */
-#define WLC_E_SET_SSID		0	/* indicates status of set SSID */
-#define WLC_E_JOIN		1	/* differentiates join IBSS from found (WLC_E_START) IBSS */
-#define WLC_E_START		2	/* STA founded an IBSS or AP started a BSS */
-#define WLC_E_AUTH		3	/* 802.11 AUTH request */
-#define WLC_E_AUTH_IND		4	/* 802.11 AUTH indication */
-#define WLC_E_DEAUTH		5	/* 802.11 DEAUTH request */
-#define WLC_E_DEAUTH_IND	6	/* 802.11 DEAUTH indication */
-#define WLC_E_ASSOC		7	/* 802.11 ASSOC request */
-#define WLC_E_ASSOC_IND		8	/* 802.11 ASSOC indication */
-#define WLC_E_REASSOC		9	/* 802.11 REASSOC request */
-#define WLC_E_REASSOC_IND	10	/* 802.11 REASSOC indication */
-#define WLC_E_DISASSOC		11	/* 802.11 DISASSOC request */
-#define WLC_E_DISASSOC_IND	12	/* 802.11 DISASSOC indication */
-#define WLC_E_QUIET_START	13	/* 802.11h Quiet period started */
-#define WLC_E_QUIET_END		14	/* 802.11h Quiet period ended */
-#define WLC_E_BEACON_RX		15	/* BEACONS received/lost indication */
-#define WLC_E_LINK		16	/* generic link indication */
-#define WLC_E_MIC_ERROR		17	/* TKIP MIC error occurred */
-#define WLC_E_NDIS_LINK		18	/* NDIS style link indication */
-#define WLC_E_ROAM		19	/* roam attempt occurred: indicate status & reason */
-#define WLC_E_TXFAIL		20	/* change in dot11FailedCount (txfail) */
-#define WLC_E_PMKID_CACHE	21	/* WPA2 pmkid cache indication */
-#define WLC_E_RETROGRADE_TSF	22	/* current AP's TSF value went backward */
-#define WLC_E_PRUNE		23	/* AP was pruned from join list for reason */
-#define WLC_E_AUTOAUTH		24	/* report AutoAuth table entry match for join attempt */
-#define WLC_E_EAPOL_MSG		25	/* Event encapsulating an EAPOL message */
-#define WLC_E_SCAN_COMPLETE	26	/* Scan results are ready or scan was aborted */
-#define WLC_E_ADDTS_IND		27	/* indicate to host addts fail/success */
-#define WLC_E_DELTS_IND		28	/* indicate to host delts fail/success */
-#define WLC_E_BCNSENT_IND	29	/* indicate to host of beacon transmit */
-#define WLC_E_BCNRX_MSG		30	/* Send the received beacon up to the host */
-#define WLC_E_BCNLOST_MSG	31	/* indicate to host loss of beacon */
-#define WLC_E_ROAM_PREP		32	/* before attempting to roam */
-#define WLC_E_PFN_NET_FOUND	33	/* PFN network found event */
-#define WLC_E_PFN_NET_LOST	34	/* PFN network lost event */
-
-#ifdef EXT_STA
-#define WLC_E_RESET_COMPLETE	35
-#define WLC_E_JOIN_START	36
-#define WLC_E_ROAM_START	37
-#define WLC_E_ASSOC_START	38
-#define WLC_E_IBSS_ASSOC	39
-#define WLC_E_RADIO		40
-#define WLC_E_LAST		41 /* highest val + 1 for range checking */
-#else /* EXT_STA */
-#define WLC_E_LAST		35	/* highest val + 1 for range checking */
-#endif /* EXT_STA */
-
-/* Event status codes */
-#define WLC_E_STATUS_SUCCESS		0	/* operation was successful */
-#define WLC_E_STATUS_FAIL		1	/* operation failed */
-#define WLC_E_STATUS_TIMEOUT		2	/* operation timed out */
-#define WLC_E_STATUS_NO_NETWORKS	3	/* failed due to no matching network found */
-#define WLC_E_STATUS_ABORT		4	/* operation was aborted */
-#define WLC_E_STATUS_NO_ACK		5	/* protocol failure: packet not ack'd */
-#define WLC_E_STATUS_UNSOLICITED	6	/* AUTH or ASSOC packet was unsolicited */
-#define WLC_E_STATUS_ATTEMPT		7	/* attempt to assoc to an auto auth configuration */
-#define WLC_E_STATUS_PARTIAL		8	/* scan results are incomplete */
-#define WLC_E_STATUS_NEWSCAN	9	/* scan aborted by another scan */
-#define WLC_E_STATUS_NEWASSOC	10	/* scan aborted due to assoc in progress */
-#define WLC_E_STATUS_11HQUIET	11	/* 802.11h quiet period started */
-#define WLC_E_STATUS_SUPPRESS	12	/* user disabled scanning (WLC_SET_SCANSUPPRESS) */
-#define WLC_E_STATUS_NOCHANS	13	/* no allowable channels to scan */
-#define WLC_E_STATUS_CCXFASTRM	14	/* scan aborted due to CCX fast roam */
-
-/* roam reason codes */
-#define WLC_E_REASON_INITIAL_ASSOC	0	/* initial assoc */
-#define WLC_E_REASON_LOW_RSSI		1	/* roamed due to low RSSI */
-#define WLC_E_REASON_DEAUTH		2	/* roamed due to DEAUTH indication */
-#define WLC_E_REASON_DISASSOC		3	/* roamed due to DISASSOC indication */
-#define WLC_E_REASON_BCNS_LOST		4	/* roamed due to lost beacons */
-#define WLC_E_REASON_FAST_ROAM_FAILED	5	/* roamed due to fast roam failure */
-#define WLC_E_REASON_DIRECTED_ROAM	6	/* roamed due to request by AP */
-#define WLC_E_REASON_TSPEC_REJECTED	7	/* roamed due to TSPEC rejection */
-#define WLC_E_REASON_BETTER_AP		8	/* roamed due to finding better AP */
-
-/* prune reason codes */
-#define WLC_E_PRUNE_ENCR_MISMATCH	1	/* encryption mismatch */
-#define WLC_E_PRUNE_BCAST_BSSID		2	/* AP uses a broadcast BSSID */
-#define WLC_E_PRUNE_MAC_DENY		3	/* STA's MAC addr is in AP's MAC deny list */
-#define WLC_E_PRUNE_MAC_NA		4	/* STA's MAC addr is not in AP's MAC allow list */
-#define WLC_E_PRUNE_REG_PASSV		5	/* AP not allowed due to regulatory restriction */
-#define WLC_E_PRUNE_SPCT_MGMT		6	/* AP does not support STA locale spectrum mgmt */
-#define WLC_E_PRUNE_RADAR		7	/* AP is on a radar channel of STA locale */
-#define WLC_E_RSN_MISMATCH		8	/* STA does not support AP's RSN */
-#define WLC_E_PRUNE_NO_COMMON_RATES	9	/* No rates in common with AP */
-#define WLC_E_PRUNE_BASIC_RATES		10	/* STA does not support all basic rates of BSS */
-#define WLC_E_PRUNE_CIPHER_NA		12	/* BSS's cipher not supported */
-#define WLC_E_PRUNE_KNOWN_STA		13	/* AP is already known to us as a STA */
-#define WLC_E_PRUNE_WDS_PEER		15	/* AP is already known to us as a WDS peer */
-#define WLC_E_PRUNE_QBSS_LOAD		16	/* QBSS LOAD - AAC is too low */
-#define WLC_E_PRUNE_HOME_AP		17	/* prune home AP */
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif /* PACKED */
-
-#endif /* _BCMEVENT_H_ */