packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

5 files changed, 0 insertions, 2018 deletions

diff --git a/package/broadcom-diag/Makefile b/package/broadcom-diag/Makefile
deleted file mode 100644
index 61b35290fc..0000000000
--- a/package/broadcom-diag/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=broadcom-diag
-PKG_RELEASE:=10
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/diag
-  SUBMENU:=Other modules
-  DEPENDS:=@TARGET_brcm47xx
-  TITLE:=Driver for router LEDs and Buttons
-  FILES:=$(PKG_BUILD_DIR)/diag.ko
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="$(BUILDFLAGS)" \
-		modules
-endef
-
-$(eval $(call KernelPackage,diag))
diff --git a/package/broadcom-diag/src/Makefile b/package/broadcom-diag/src/Makefile
deleted file mode 100644
index 44c80a8bff..0000000000
--- a/package/broadcom-diag/src/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for diag driver
-#
-# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version
-# 2 of the License, or (at your option) any later version.
-#
-
-obj-m := diag.o
-
-ifeq ($(MAKING_MODULES),1)
-
--include $(TOPDIR)/Rules.make
-endif
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
deleted file mode 100644
index ccbaee2d26..0000000000
--- a/package/broadcom-diag/src/diag.c
+++ /dev/null
@@ -1,1807 +0,0 @@
-/*
- * diag.c - GPIO interface driver for Broadcom boards
- *
- * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
- * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2008 Andy Boyett <agb@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/kmod.h>
-#include <linux/proc_fs.h>
-#include <linux/timer.h>
-#include <linux/version.h>
-#include <asm/uaccess.h>
-#include <linux/workqueue.h>
-#include <linux/skbuff.h>
-#include <linux/netlink.h>
-#include <linux/kobject.h>
-#include <net/sock.h>
-#include <bcm47xx_board.h>
-extern u64 uevent_next_seqnum(void);
-
-#include "gpio.h"
-#include "diag.h"
-#define getvar(str) (nvram_get(str)?:"")
-
-static inline int startswith (char *source, char *cmp) { return !strncmp(source,cmp,strlen(cmp)); }
-static int fill_event(struct event_t *);
-static unsigned int gpiomask = 0;
-module_param(gpiomask, int, 0644);
-
-enum {
-	/* Linksys */
-	WAP54GV1,
-	WAP54GV2,
-	WAP54GV3,
-	WRT54GV1,
-	WRT54G,
-	WRTSL54GS,
-	WRT54G3G,
-	WRT54G3GV2_VF,
-	WRT150NV1,
-	WRT150NV11,
-	WRT160NV1,
-	WRT160NV3,
-	WRT300NV11,
-	WRT350N,
-	WRT600N,
-	WRT600NV11,
-	WRT610N,
-	WRT610NV2,
-	E1000V1,
-	E3000V1,
-	E3200V1,
-
-	/* ASUS */
-	WLHDD,
-	WL300G,
-	WL320GE,
-	WL330GE,
-	WL500G,
-	WL500GD,
-	WL500GP,
-	WL500GPV2,
-	WL500W,
-	WL520GC,
-	WL520GU,
-	ASUS_4702,
-	WL700GE,
-	RTN16,
-
-	/* Buffalo */
-	WBR2_G54,
-	WHR_G54S,
-	WHR_HP_G54,
-	WHR_G125,
-	WHR2_A54G54,
-	WLA2_G54L,
-	WZR_G300N,
-	WZR_RS_G54,
-	WZR_RS_G54HP,
-	BUFFALO_UNKNOWN,
-	BUFFALO_UNKNOWN_4710,
-
-	/* Siemens */
-	SE505V1,
-	SE505V2,
-
-	/* US Robotics */
-	USR5461,
-
-	/* Dell */
-	TM2300,
-	TM2300V2,
-
-	/* Motorola */
-	WE800G,
-	WR850GV1,
-	WR850GV2V3,
-	WR850GP,
-
-	/* Belkin */
-	BELKIN_UNKNOWN,
-	BELKIN_F7D4301,
-
-	/* Netgear */
-	WGT634U,
-	WNR834BV1,
-	WNR834BV2,
-	WNDR3400V1,
-	WNDR3700V3,
-
-	/* Trendware */
-	TEW411BRPP,
-
-	/* SimpleTech */
-	STI_NAS,
-
-	/* D-Link */
-	DIR130,
-	DIR320,
-	DIR330,
-	DWL3150,
-
-	/* Sitecom */
-	WL105B,
-
-	/* Western Digital */
-	WDNetCenter,
-
-	/* Askey */
-	RT210W,
-
-	/* OvisLink */
-	WL1600GL,
-
-	/* Microsoft */
-	MN700,
-
-	/* Edimax */
-	PS1208MFG,
-};
-
-static void __init bcm4780_init(void) {
-		int pin = 1 << 3;
-
-		/* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
-		printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
-		bcm47xx_gpio_outen(pin, pin);
-		bcm47xx_gpio_control(pin, 0);
-		bcm47xx_gpio_out(pin, pin);
-
-		/* Wait 5s, so the HDD can spin up */
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ * 5);
-}
-
-static void __init NetCenter_init(void) {
-		/* unset pin 6 (+12V) */
-		int pin = 1 << 6;
-		bcm47xx_gpio_outen(pin, pin);
-		bcm47xx_gpio_control(pin, 0);
-		bcm47xx_gpio_out(pin, pin);
-		/* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
-		pin = 1 << 1;
-		bcm47xx_gpio_outen(pin, pin);
-		bcm47xx_gpio_control(pin, 0);
-		bcm47xx_gpio_out(pin, pin);
-		/* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
-		bcm4780_init();
-}
-
-static void __init bcm57xx_init(void) {
-	int pin = 1 << 2;
-
-	/* FIXME: switch comes up, but port mappings/vlans not right */
-	bcm47xx_gpio_outen(pin, pin);
-	bcm47xx_gpio_control(pin, 0);
-	bcm47xx_gpio_out(pin, pin);
-}
-
-static struct platform_t __initdata platforms[] = {
-	/* Linksys */
-	[WAP54GV1] = {
-		.name		= "Linksys WAP54G V1",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 3 },
-			{ .name = "wlan",	.gpio = 1 << 4 },
-		},
-	},
-	[WAP54GV2] = {
-		.name		= "Linksys WAP54G V2",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 1 << 5, .polarity = REVERSE },
-			/* GPIO 6 is b44 (eth0, LAN) PHY power */
-		},
-	},
-	[WAP54GV3] = {
-		.name		= "Linksys WAP54G V3",
-		.buttons	= {
-			/* FIXME: verify this */
-			{ .name = "reset",	.gpio = 1 << 7 },
-			{ .name = "ses",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			/* FIXME: diag? */
-			{ .name = "ses",	.gpio = 1 << 1 },
-		},
-	},
-	[WRT54GV1] = {
-		.name		= "Linksys WRT54G V1.x",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
-			{ .name = "dmz",	.gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
-		},
-	},
-	[WRT54G] = {
-		.name		= "Linksys WRT54G/GS/GL",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "dmz",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "ses_white",	.gpio = 1 << 2, .polarity = REVERSE },
-			{ .name = "ses_orange",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WRTSL54GS] = {
-		.name		= "Linksys WRTSL54GS",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "dmz",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "ses_white",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "ses_orange",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	[WRT54G3G] = {
-		.name		= "Linksys WRT54G3G",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "3g",		.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "dmz",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "3g_green",	.gpio = 1 << 2, .polarity = NORMAL },
-			{ .name = "3g_blue",	.gpio = 1 << 3, .polarity = NORMAL },
-			{ .name = "3g_blink",	.gpio = 1 << 5, .polarity = NORMAL },
-		},
-	},
-	[WRT54G3GV2_VF] = {
-		.name		= "Linksys WRT54G3GV2-VF",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "3g",		.gpio = 1 << 5 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "3g_green",	.gpio = 1 << 2, .polarity = NORMAL },
-			{ .name = "3g_blue",	.gpio = 1 << 3, .polarity = NORMAL },
-		},
-	},
-	[WRT150NV1] = {
-		.name		= "Linksys WRT150N V1",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_green",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
-		},
-	},
-	[WRT150NV11] = {
-		.name		= "Linksys WRT150N V1.1",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_green",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
-		},
-	},
-	[WRT160NV1] = {
-		.name		= "Linksys WRT160N v1.x",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_blue",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
-		},
-	},
-	[WRT160NV3] = {
-		.name		= "Linksys WRT160N V3",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 5 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_blue",	.gpio = 1 << 4, .polarity = REVERSE },
-			{ .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WRT300NV11] = {
-		.name           = "Linksys WRT300N V1.1",
-		.buttons        = {
-			{ .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
-			{ .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
-		},
-		.leds           = {
-			{ .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
-			{ .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
-			{ .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
-		},
-		.platform_init = bcm57xx_init,
-	},
-	[WRT350N] = {
-		.name		= "Linksys WRT350N",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 8 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_amber",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "ses_green",	.gpio = 1 << 9, .polarity = REVERSE },
-			{ .name = "usb_blink",	.gpio = 1 << 10, .polarity = REVERSE },
-			{ .name = "usb",	.gpio = 1 << 11, .polarity = REVERSE },
-		},
-		.platform_init = bcm57xx_init,
-	},
-	[WRT600N] = {
-		.name           = "Linksys WRT600N",
-		.buttons        = {
-			{ .name = "reset",      .gpio = 1 << 6 },
-			{ .name = "ses",        .gpio = 1 << 7 },
-		},
-		.leds           = {
-			{ .name = "power",              .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
-			{ .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
-			{ .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
-			{ .name = "wl0_ses_green",      .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
-			{ .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
-			{ .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
-		},
-		.platform_init = bcm57xx_init,
-	},
-	[WRT600NV11] = {
-		.name           = "Linksys WRT600N V1.1",
-		.buttons        = {
-			{ .name = "reset",      .gpio = 1 << 6 },
-			{ .name = "ses",        .gpio = 1 << 7 },
-		},
-		.leds           = {
-			{ .name = "power",             .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
-			{ .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
-			{ .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
-			{ .name = "wl0_ses_green",     .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
-			{ .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
-			{ .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
-		},
-		.platform_init = bcm57xx_init,
-	},
-	[WRT610N] = {
-		.name           = "Linksys WRT610N",
-		.buttons        = {
-			{ .name = "reset",      .gpio = 1 << 6 },
-			{ .name = "ses",        .gpio = 1 << 8 },
-		},
-		.leds           = {
-			{ .name = "power",      .gpio = 1 << 1,  .polarity = NORMAL }, // Power LED
-			{ .name = "usb",        .gpio = 1 << 0,  .polarity = REVERSE }, // USB LED
-			{ .name = "ses_amber",  .gpio = 1 << 3,  .polarity = REVERSE }, // WiFi protected setup LED amber
-			{ .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
-		},
-	},
-	[WRT610NV2] = {
-		.name		= "Linksys WRT610N V2",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5,	.polarity = NORMAL },	// Power LED
-			{ .name = "usb",	.gpio = 1 << 7,	.polarity = NORMAL },	// USB LED
-			{ .name = "ses_amber",	.gpio = 1 << 0,	.polarity = REVERSE },	// WiFi protected setup LED amber
-			{ .name = "ses_blue",	.gpio = 1 << 3,	.polarity = REVERSE },	// WiFi protected setup LED blue
-			{ .name = "wlan",	.gpio = 1 << 1,	.polarity = NORMAL },	// Wireless LED
-		},
-	},
-	/* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */
-	[E1000V1] = {
-		.name           = "Linksys E1000 V1",
-		.buttons        = {
-			{ .name = "reset",      .gpio = 1 << 6 },
-			{ .name = "wps",        .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */
-		},
-		.leds           = {
-			/** turns on leds for all ethernet ports (wan too)
-			 *  this also disconnects some, or maybe all, ethernet ports 
-			 *  1: leds work normally
-			 *  0: all lit all the time */
-			/* nvram get gpio3=robo_reset */
-			{ .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
-			{ .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "ses_blue",   .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */
-			{ .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */
-		},
-	},
-	[E3000V1] = {
-		.name		= "Linksys E3000 V1",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5,	.polarity = NORMAL },	// Power LED
-			{ .name = "usb",	.gpio = 1 << 7,	.polarity = NORMAL },	// USB LED
-			{ .name = "ses_amber",	.gpio = 1 << 0,	.polarity = REVERSE },	// WiFi protected setup LED amber
-			{ .name = "ses_blue",	.gpio = 1 << 3,	.polarity = REVERSE },	// WiFi protected setup LED blue
-			{ .name = "wlan",	.gpio = 1 << 1,	.polarity = NORMAL },	// Wireless LED
-		},
-	},
-	[E3200V1] = {
-		.name		= "Linksys E3200 V1",
-		.buttons	= {
-			/* { .name = "switch",	.gpio = 1 << 4 },*/	/* nvram get gpio4=robo_reset */
-			{ .name = "reset",	.gpio = 1 << 5 },	/* nvram get reset_gpio=5 */
-			{ .name = "wps",	.gpio = 1 << 8 },	/* nvram get gpio8=wps_button */
-			/* { .name = "wombo",	.gpio = 1 << 23 },*/	/* nvram get gpio23=wombo_reset - wireless on motherboard */
-		},
-		.leds	= {
-			{ .name = "power",	.gpio = 1 << 3, .polarity = REVERSE },	/* Power LED */
-		},
-	},
-	/* Asus */
-	[WLHDD] = {
-		.name		= "ASUS WL-HDD",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "usb",	.gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WL300G] = {
-		.name		= "ASUS WL-300g",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WL320GE] = {
-		.name		= "ASUS WL-320gE/WL-320gP",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "power",	.gpio = 1 << 2, .polarity = REVERSE },
-			{ .name = "link",	.gpio = 1 << 11, .polarity = REVERSE },
-		},
-	},
-	[WL330GE] = {
-		.name		= "ASUS WL-330gE",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 2 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WL500G] = {
-		.name		= "ASUS WL-500g",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WL500GD] = {
-		.name		= "ASUS WL-500g Deluxe",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WL500GP] = {
-		.name		= "ASUS WL-500g Premium",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WL500GPV2] = {
-		.name		= "ASUS WL-500g Premium V2",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 2 },
-			{ .name = "ses",	.gpio = 1 << 3 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WL500W] = {
-		.name		= "ASUS WL-500W",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "ses",	.gpio = 1 << 7 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5, .polarity = REVERSE },
-		},
-	},
-	[WL520GC] = {
-		.name		= "ASUS WL-520GC",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 2 },
-			{ .name = "ses",	.gpio = 1 << 3 },
-		},
-		.leds		= {
-		{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WL520GU] = {
-		.name		= "ASUS WL-520gU",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 2 },
-			{ .name = "ses",	.gpio = 1 << 3 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[ASUS_4702] = {
-		.name		= "ASUS (unknown, BCM4702)",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	[WL700GE] = {
-		.name		= "ASUS WL-700gE",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
-			{ .name = "ses",	.gpio = 1 << 4 }, // on back, actual name ezsetup
-			{ .name = "power",	.gpio = 1 << 0 }, // on front
-			{ .name = "copy",	.gpio = 1 << 6 }, // on front
-		},
-		.leds		= {
-#if 0
-			// GPIO that controls power led also enables/disables some essential functions
-			// - power to HDD
-			// - switch leds
-			{ .name = "power",	.gpio = 1 << 3, .polarity = NORMAL },  // actual name power
-#endif
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
-		},
-		.platform_init = bcm4780_init,
-	},
-	[RTN16] = {
-		.name		= "ASUS RT-N16",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 8 },
-			{ .name = "ses",	.gpio = 1 << 5 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 7, .polarity = NORMAL },
-		},
-	},
-	/* Buffalo */
-	[WHR_G54S] = {
-		.name		= "Buffalo WHR-G54S",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-			{ .name = "bridge",	.gpio = 1 << 5 },
-			{ .name = "ses",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "internal",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "bridge",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WBR2_G54] = {
-		.name		= "Buffalo WBR2-G54",
-		/* FIXME: verify */
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WHR_HP_G54] = {
-		.name		= "Buffalo WHR-HP-G54",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-			{ .name = "bridge",	.gpio = 1 << 5 },
-			{ .name = "ses",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "internal",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "bridge",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WHR_G125] = {
-		.name		= "Buffalo WHR-G125",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-			{ .name = "bridge",	.gpio = 1 << 5 },
-			{ .name = "ses",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "internal",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "bridge",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WHR2_A54G54] = {
-		.name		= "Buffalo WHR2-A54G54",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	[WLA2_G54L] = {
-		.name		= "Buffalo WLA2-G54L",
-		/* FIXME: verify */
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WZR_G300N] = {
-		.name		= "Buffalo WZR-G300N",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "bridge",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-		},
-	},
-	[WZR_RS_G54] = {
-		.name		= "Buffalo WZR-RS-G54",
-		.buttons	= {
-			{ .name = "ses",	.gpio = 1 << 0 },
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "vpn",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[WZR_RS_G54HP] = {
-		.name		= "Buffalo WZR-RS-G54HP",
-		.buttons	= {
-			{ .name = "ses",	.gpio = 1 << 0 },
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-			{ .name = "ses",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "vpn",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[BUFFALO_UNKNOWN] = {
-		.name		= "Buffalo (unknown)",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	[BUFFALO_UNKNOWN_4710] = {
-		.name		= "Buffalo (unknown, BCM4710)",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	/* Siemens */
-	[SE505V1] = {
-		.name		= "Siemens SE505 V1",
-		.buttons	= {
-			/* No usable buttons */
-		},
-		.leds		= {
-//			{ .name = "power",	.gpio = 1 << 0  .polarity = REVERSE },	// Usable when retrofitting D26 (?)
-			{ .name = "dmz",	.gpio = 1 << 4, .polarity = REVERSE },	// actual name WWW
-			{ .name = "wlan",	.gpio = 1 << 3, .polarity = REVERSE },
-		},
-	},
-	[SE505V2] = {
-		.name		= "Siemens SE505 V2",
-		.buttons	= {
-			/* No usable buttons */
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "dmz",	.gpio = 1 << 0, .polarity = REVERSE },	// actual name WWW
-			{ .name = "wlan",	.gpio = 1 << 3, .polarity = REVERSE },
-		},
-	},
-	/* US Robotics */
-	[USR5461] = {
-		.name		= "U.S. Robotics USR5461",
-		.buttons	= {
-			/* No usable buttons */
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "printer",	.gpio = 1 << 1, .polarity = REVERSE },
-		},
-	},
-	/* Dell */
-	[TM2300] = {
-		.name		= "Dell TrueMobile 2300",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "power",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	[TM2300V2] = {
-		.name		= "Dell TrueMobile 2300 v2",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "power",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	/* Motorola */
-	[WE800G] = {
-		.name		= "Motorola WE800G",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 4, .polarity = NORMAL },
-			{ .name = "diag",	.gpio = 1 << 2, .polarity = REVERSE },
-			{ .name = "wlan_amber",	.gpio = 1 << 1, .polarity = NORMAL },
-		},
-	},
-	[WR850GV1] = {
-		.name		= "Motorola WR850G V1",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 0 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 4, .polarity = NORMAL },
-			{ .name = "diag",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "dmz",	.gpio = 1 << 6, .polarity = NORMAL },
-			{ .name = "wlan_red",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "wlan_green",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	[WR850GV2V3] = {
-		.name		= "Motorola WR850G V2/V3",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 5 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "wan",	.gpio = 1 << 6, .polarity = INPUT },
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-	[WR850GP] = {
-		.name		= "Motorola WR850GP",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 5 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "dmz",	.gpio = 1 << 6, .polarity = REVERSE },
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = REVERSE },
-		},
-	},
-
-	/* Belkin */
-	[BELKIN_UNKNOWN] = {
-		.name		= "Belkin (unknown)",
-		/* FIXME: verify & add detection */
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5, .polarity = NORMAL },
-			{ .name = "wlan",	.gpio = 1 << 3, .polarity = NORMAL },
-			{ .name = "connected",	.gpio = 1 << 0, .polarity = NORMAL },
-		},
-	},
-	[BELKIN_F7D4301] = {
-		.name		= "Belkin PlayMax F7D4301",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-			{ .name = "wps",	.gpio = 1 << 8 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 11, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 13, .polarity = REVERSE },
-			{ .name = "led0",	.gpio = 1 << 14, .polarity = REVERSE },
-			{ .name = "led1",	.gpio = 1 << 15, .polarity = REVERSE },
-		},
-	},
-	/* Netgear */
-	[WGT634U] = {
-		.name		= "Netgear WGT634U",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 2 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 3, .polarity = NORMAL },
-		},
-	},
-	/* Netgear */
-	[WNR834BV1] = {
-		.name		= "Netgear WNR834B V1",
-		.buttons	= { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ },
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 4, .polarity = REVERSE },
-			{ .name = "diag",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 6, .polarity = REVERSE },
-		},
-	},
-	/* Netgear */
-	[WNR834BV2] = {
-		.name	 	= "Netgear WNR834B V2",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 6 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 2, .polarity = NORMAL },
-			{ .name = "diag",	.gpio = 1 << 3, .polarity = NORMAL },
-			{ .name = "connected",	.gpio = 1 << 7, .polarity = NORMAL },
-		},
-	},
-	[WNDR3400V1] = {
-		.name		= "Netgear WNDR3400 V1",
-		.buttons	= {
-			/* nvram get gpio5=robo_reset */
-			{ .name = "reset",	.gpio = 1 << 4 },
-			{ .name = "wps",	.gpio = 1 << 6 },
-			{ .name = "wlan",	.gpio = 1 << 8 },
-		},
-		.leds		= {
-			{ .name = "wlan",	.gpio = 0 << 0, .polarity = NORMAL },
-			{ .name = "connected",	.gpio = 1 << 0, .polarity = NORMAL },
-			{ .name = "power",	.gpio = 1 << 3, .polarity = NORMAL },
-			{ .name = "diag",	.gpio = 1 << 7, .polarity = NORMAL },
-			{ .name = "usb",	.gpio = 1 << 2, .polarity = REVERSE },
-		},
-	},
-	[WNDR3700V3] = {
-		.name		= "Netgear WNDR3700 V3",
-		.buttons	= {
-			/* { .name = "usb",	.gpio = 1 << 1 }, */ /* this button doesn't seem to exist. */
-			{ .name = "wlan",	.gpio = 1 << 2 },
-			{ .name = "reset",	.gpio = 1 << 3 },
-			{ .name = "wps",	.gpio = 1 << 4 },
-			/* { .name = "switch",	.gpio = 1 << 5 },*/	/* nvram get gpio5=robo_reset */
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = (1 << 0) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			{ .name = "diag",	.gpio = (1 << 1) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			/* WAN LED doesn't respond to GPIO control. The switch is probably driving it.
-			 * { .name = "wan",	.gpio = (1 << 2) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			 */
-			{ .name = "wlan2g",	.gpio = (1 << 3) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			{ .name = "wlan5g",	.gpio = (1 << 4) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			{ .name = "usb",	.gpio = (1 << 5) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			{ .name = "wps",	.gpio = (1 << 6) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = (1 << 7) | GPIO_TYPE_SHIFT, .polarity = REVERSE },
-		},
-	},
-	/* Trendware */
-	[TEW411BRPP] = {
-		.name           = "Trendware TEW411BRP+",
-		.buttons        = {
-			{ /* No usable buttons */ },
-		},
-		.leds           = {
-			{ .name = "power",      .gpio = 1 << 7, .polarity = NORMAL },
-			{ .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "bridge",     .gpio = 1 << 6, .polarity = NORMAL },
-		},
-	},
-	/* SimpleTech */
-	[STI_NAS] = {
-		.name	   = "SimpleTech SimpleShare NAS",
-		.buttons	= {
-			{ .name = "reset",      .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe.
-		},
-		.leds	   = {
-			{ .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
-		},
-		.platform_init = bcm4780_init,
-	},
-	/* D-Link */
-	[DIR130] = {
-		.name	  = "D-Link DIR-130",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 3},
-			{ .name = "reserved",	.gpio = 1 << 7},
-		},
-		.leds	   = {
-			{ .name = "diag",	.gpio = 1 << 0},
-			{ .name = "blue",	.gpio = 1 << 6},
-		},
-	},
-	[DIR320] = {
-		.name	  = "D-Link DIR-320",
-		.buttons	= {
-			{ .name = "reserved",	.gpio = 1 << 6},
-			{ .name = "reset",	.gpio = 1 << 7},
-		},
-		.leds	   = {
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = NORMAL },
-			{ .name = "diag",	.gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
-			{ .name = "red",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "blue",	.gpio = 1 << 4, .polarity = REVERSE },
-			{ .name = "usb",	.gpio = 1 << 5, .polarity = NORMAL },
-		},
-	},
-	[DIR330] = {
-		.name	  = "D-Link DIR-330",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 3},
-			{ .name = "reserved",	.gpio = 1 << 7},
-		},
-		.leds	   = {
-			{ .name = "diag",	.gpio = 1 << 0},
-			{ .name = "usb",	.gpio = 1 << 4},
-			{ .name = "blue",	.gpio = 1 << 6},
-		},
-	},
-	[DWL3150] = {
-		.name	= "D-Link DWL-3150",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 7},
-		},
-		.leds	  = {
-			{ .name = "diag",	.gpio = 1 << 2},
-			{ .name = "status",	.gpio = 1 << 1},
-		},
-	},
-	/* Double check */
-	[WL105B] = {
-		.name	= "Sitecom WL-105b",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 10},
-		},
-		.leds	  = {
-			{ .name = "wlan",	.gpio = 1 << 4},
-			{ .name = "power",	.gpio = 1 << 3},
-		},
-	},
-	/* Western Digital Net Center */
-	[WDNetCenter] = {
-		.name   = "Western Digital NetCenter",
-		.buttons        = {
-			{ .name = "power",	.gpio = 1 << 0},
-			{ .name = "reset",	.gpio = 1 << 7},
-		},
-		.platform_init = NetCenter_init,
-	},
-	/* Askey (and clones) */
-	[RT210W] = {
-		.name		= "Askey RT210W",
-		.buttons	= {
-			/* Power button is hard-wired to hardware reset */
-			/* but is also connected to GPIO 7 (probably for bootloader recovery)  */
-			{ .name = "power",	.gpio = 1 << 7},
-		},
-		.leds		= {
-		 	/* These were verified and named based on Belkin F5D4230-4 v1112 */
-			{ .name = "connected",	.gpio = 1 << 0, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 3, .polarity = REVERSE },
-			{ .name = "power",	.gpio = 1 << 5, .polarity = REVERSE },
-		},
-	},
-	[WL1600GL] = {
-		.name		= "OvisLink WL-1600GL",
-		.buttons	= {
-			{ .name = "reset",	.gpio = 1 << 3 },
-			{ .name = "ses",	.gpio = 1 << 4 },
-		},
-		.leds		= {
-			{ .name = "power",	.gpio = 1 << 5, .polarity = REVERSE },
-			{ .name = "wps",	.gpio = 1 << 2, .polarity = REVERSE },
-			{ .name = "wlan",	.gpio = 1 << 1, .polarity = REVERSE },
-			{ .name = "connected",	.gpio = 1 << 0, .polarity = REVERSE },
-		},
-	},
-	/* Microsoft */
-	[MN700] = {
-		.name   = "Microsoft MN-700",
-		.buttons        = {
-			{ .name = "reset",	.gpio = 1 << 7 },
-		},
-		.leds     = {
-			{ .name = "power",	.gpio = 1 << 6, .polarity = NORMAL },
-		},
-	},
-	/* Edimax */
-	[PS1208MFG] = {
-		.name   = "Edimax PS-1208MFG",
-		.buttons        = {
-			{ .name = "reset",	.gpio = 1 << 4 },
-		},
-		.leds     = {
-			{ .name = "status",	.gpio = 1 << 1, .polarity = NORMAL },
-			{ .name = "wlan",	.gpio = 1 << 0, .polarity = NORMAL },
-		},
-	},
-};
-
-static struct platform_t __init *platform_detect_legacy(void)
-{
-	char *boardnum, *boardtype, *buf;
-
-	if (strcmp(getvar("nvram_type"), "cfe") == 0)
-		return &platforms[WGT634U];
-
-
-	/* no easy model number, attempt to guess */
-	boardnum = getvar("boardnum");
-	boardtype = getvar("boardtype");
-
-	if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N  v1/V1.1 */
-		if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
-			return &platforms[WRT600NV11];
-
-	if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
-			return &platforms[WRT600N];
-	}
-
-	if (startswith(getvar("pmon_ver"), "CFE")) {
-		/* CFE based - newer hardware */
-		if (!strcmp(boardnum, "42")) { /* Linksys */
-			if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
-				return &platforms[WRT350N];
-
-			if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
-				return &platforms[WRT54G3G];
-
-			if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
-				return &platforms[WRTSL54GS];
-
-			/* default to WRT54G */
-			return &platforms[WRT54G];
-		}
-		if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
-			return &platforms[WAP54GV2];
-
-		if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e"))
-			return &platforms[WL1600GL];
-
-
-		if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
-			if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
-				return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */
-		}
-
-		if (!strcmp(boardnum, "45")) { /* ASUS */
-			if (!strcmp(boardtype,"0x0472"))
-				return &platforms[WL500W];
-			else if (!strcmp(boardtype,"0x467"))
-				return &platforms[WL320GE];
-			else
-				return &platforms[WL500GD];
-		}
-
-		if (!strcmp(boardnum, "10496"))
-			return &platforms[USR5461];
-
-		if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
-			return &platforms[SE505V2];
-
-		if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
-				!strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
-			return &platforms[DIR320];
-
-		if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) {
-			return &platforms[WDNetCenter];
-		}
-
-		if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B  V1 and V2*/
-			if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8"))
-				return &platforms[WNR834BV1];
-			if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1"))
-				return &platforms[WNR834BV2];
-		}
-
-	} else { /* PMON based - old stuff */
-		if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
-			(simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
-			return &platforms[WR850GV1];
-		}
-		if (startswith(boardtype, "bcm94710dev")) {
-			if (!strcmp(boardnum, "42"))
-				return &platforms[WRT54GV1];
-			if (simple_strtoul(boardnum, NULL, 0) == 2)
-				return &platforms[WAP54GV1];
-		}
-		/* MN-700 has also hardware_version 'WL500-...', so use boardnum */
-		if (startswith(getvar("hardware_version"), "WL500-")) {
-			if (!strcmp(getvar("boardnum"), "mn700"))
-				return &platforms[MN700];
-			else
-				return &platforms[WL500G];
-		}
-		if (startswith(getvar("hardware_version"), "WL300-")) {
-			/* Either WL-300g or WL-HDD, do more extensive checks */
-			if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
-				(simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1))
-				return &platforms[WLHDD];
-			if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
-				(simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
-				return &platforms[WL300G];
-		}
-		/* Sitecom WL-105b */
-		if (startswith(boardnum, "2") && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1)
-			return &platforms[WL105B];
-
-		/* unknown asus stuff, probably bcm4702 */
-		if (startswith(boardnum, "asusX"))
-			return &platforms[ASUS_4702];
-
-		/* bcm4702 based Askey RT210W clones, Including:
-		 * Askey RT210W (duh?)
-		 * Siemens SE505v1
-		 * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
-		 */
-		if (!strcmp(boardtype,"bcm94710r4")
-		 && !strcmp(boardnum ,"100")
-		 && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
-		   ){
-			return &platforms[RT210W];
-		}
-	}
-
-	if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
-		if (startswith(boardtype, "bcm94710ap"))
-			return &platforms[BUFFALO_UNKNOWN_4710];
-		else
-			return &platforms[BUFFALO_UNKNOWN];
-	}
-
-	if (startswith(getvar("CFEver"), "MotoWRv2") ||
-		startswith(getvar("CFEver"), "MotoWRv3") ||
-		!strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
-
-		return &platforms[WR850GV2V3];
-	}
-
-	if (!strcmp(boardnum, "44") && !strcmp(getvar("boardflags"),"0x0388")) {  /* Trendware TEW-411BRP+ */
-		return &platforms[TEW411BRPP];
-	}
-
-	if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */
-		return &platforms[STI_NAS];
-
-	if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */
-		return &platforms[DWL3150];
-
-	if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */
-		!strcmp(getvar("status_gpio"), "1")) /* gpio based detection */
-		return &platforms[PS1208MFG];
-
-	/* not found */
-	return NULL;
-}
-
-static struct platform_t __init *platform_detect(void)
-{
-	enum bcm47xx_board board;
-	const char *board_name;
-
-
-	board = bcm47xx_board_get();
-	board_name = bcm47xx_board_get_name();
-	if (board != BCM47XX_BOARD_UNKNOWN && board != BCM47XX_BOARD_NON)
-		printk(MODULE_NAME ": kernel found a \"%s\"\n", board_name);
-
-	switch(board) {
-	case BCM47XX_BOARD_ASUS_RTN16:
-		return &platforms[RTN16];
-	case BCM47XX_BOARD_ASUS_WL330GE:
-		return &platforms[WL330GE];
-	case BCM47XX_BOARD_ASUS_WL500GPV1:
-		return &platforms[WL500GP];
-	case BCM47XX_BOARD_ASUS_WL500GPV2:
-		return &platforms[WL500GPV2];
-	case BCM47XX_BOARD_ASUS_WL520GC:
-		return &platforms[WL520GC];
-	case BCM47XX_BOARD_ASUS_WL520GU:
-		return &platforms[WL520GU];
-	case BCM47XX_BOARD_ASUS_WL700GE:
-		return &platforms[WL700GE];
-	case BCM47XX_BOARD_BELKIN_F7D4301:
-		return &platforms[BELKIN_F7D4301];
-	case BCM47XX_BOARD_BUFFALO_WBR2_G54:
-		return &platforms[WBR2_G54];
-	case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
-		return &platforms[WHR2_A54G54];
-	case BCM47XX_BOARD_BUFFALO_WHR_G125:
-		return &platforms[WHR_G125];
-	case BCM47XX_BOARD_BUFFALO_WHR_G54S:
-		return &platforms[WHR_G54S];
-	case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
-		return &platforms[WHR_HP_G54];
-	case BCM47XX_BOARD_BUFFALO_WLA2_G54L:
-		return &platforms[WLA2_G54L];
-	case BCM47XX_BOARD_BUFFALO_WZR_G300N:
-		return &platforms[WZR_G300N];
-	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
-		return &platforms[WZR_RS_G54];
-	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
-		return &platforms[WZR_RS_G54HP];
-	case BCM47XX_BOARD_DELL_TM2300:
-		return &platforms[TM2300];
-	case BCM47XX_BOARD_DLINK_DIR130:
-		return &platforms[DIR130];
-	case BCM47XX_BOARD_DLINK_DIR330:
-		return &platforms[DIR330];
-	case BCM47XX_BOARD_LINKSYS_E1000V1:
-		return &platforms[E1000V1];
-	case BCM47XX_BOARD_LINKSYS_E3000V1:
-		return &platforms[E3000V1];
-	case BCM47XX_BOARD_LINKSYS_E3200V1:
-		return &platforms[E3200V1];
-	case BCM47XX_BOARD_LINKSYS_WRT150NV1:
-		return &platforms[WRT150NV1];
-	case BCM47XX_BOARD_LINKSYS_WRT150NV11:
-		return &platforms[WRT150NV11];
-	case BCM47XX_BOARD_LINKSYS_WRT160NV1:
-		return &platforms[WRT160NV1];
-	case BCM47XX_BOARD_LINKSYS_WRT160NV3:
-		return &platforms[WRT160NV3];
-	case BCM47XX_BOARD_LINKSYS_WRT300NV11:
-		return &platforms[WRT300NV11];
-	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
-		return &platforms[WRT54G3GV2_VF];
-	case BCM47XX_BOARD_LINKSYS_WRT610NV1:
-		return &platforms[WRT610N];
-	case BCM47XX_BOARD_LINKSYS_WRT610NV2:
-		return &platforms[WRT610NV2];
-	case BCM47XX_BOARD_MOTOROLA_WE800G:
-		return &platforms[WE800G];
-	case BCM47XX_BOARD_MOTOROLA_WR850GP:
-		return &platforms[WR850GP];
-	case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
-		return &platforms[WR850GV2V3];
-	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
-		return &platforms[WNDR3400V1];
-	case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
-		return &platforms[WNDR3700V3];
-	case BCM47XX_BOARD_UNKNOWN:
-	case BCM47XX_BOARD_NON:
-		printk(MODULE_NAME ": unknown board found, try legacy detect\n");
-		printk(MODULE_NAME ": please open a ticket at https://dev.openwrt.org and attach the complete nvram\n");
-		return platform_detect_legacy();
-	default:
-		printk(MODULE_NAME ": board was detected as \"%s\", but not gpio configuration available\n", board_name);
-		printk(MODULE_NAME ": now trying legacy detect\n");
-		return platform_detect_legacy();
-	}
-}
-
-static inline void ssb_maskset32(struct ssb_device *dev,
-				  u16 offset, u32 mask, u32 set)
-{
-	ssb_write32(dev, offset, (ssb_read32(dev, offset) & mask) | set);
-}
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
-{
-	int irq;
-
-	irq = gpio_to_irq(0);
-	if (irq == -EINVAL) return;
-	
-	if (enabled) {
-		if (request_irq(irq, handler, IRQF_SHARED, "gpio", handler))
-			return;
-	} else {
-		free_irq(irq, handler);
-	}
-
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		if (bcm47xx_bus.ssb.chipco.dev)
-			ssb_maskset32(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
-		break;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		if (bcm47xx_bus.bcma.bus.drv_cc.core)
-			bcma_maskset32(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
-		break;
-#endif
-	}
-}
-
-static void register_buttons(struct button_t *b)
-{
-	for (; b->name; b++)
-		platform.button_mask |= b->gpio;
-
-	platform.button_mask &= ~gpiomask;
-
-	bcm47xx_gpio_outen(platform.button_mask, 0);
-	bcm47xx_gpio_control(platform.button_mask, 0);
-	platform.button_polarity = bcm47xx_gpio_in(~0) & platform.button_mask;
-	bcm47xx_gpio_polarity(platform.button_mask, platform.button_polarity);
-	bcm47xx_gpio_intmask(platform.button_mask, platform.button_mask);
-
-	gpio_set_irqenable(1, button_handler);
-}
-
-static void unregister_buttons(struct button_t *b)
-{
-	bcm47xx_gpio_intmask(platform.button_mask, 0);
-
-	gpio_set_irqenable(0, button_handler);
-}
-
-
-static void add_msg(struct event_t *event, char *msg, int argv)
-{
-	char *s;
-
-	if (argv)
-		return;
-
-	s = skb_put(event->skb, strlen(msg) + 1);
-	strcpy(s, msg);
-}
-
-static void hotplug_button(struct work_struct *work)
-{
-	struct event_t *event = container_of(work, struct event_t, wq);
-	char *s;
-
-	event->skb = alloc_skb(2048, GFP_KERNEL);
-
-	s = skb_put(event->skb, strlen(event->action) + 2);
-	sprintf(s, "%s@", event->action);
-	fill_event(event);
-
-	NETLINK_CB(event->skb).dst_group = 1;
-	broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-
-	kfree(event);
-}
-
-
-static int fill_event (struct event_t *event)
-{
-	static char buf[128];
-
-	add_msg(event, "HOME=/", 0);
-	add_msg(event, "PATH=/sbin:/bin:/usr/sbin:/usr/bin", 0);
-	add_msg(event, "SUBSYSTEM=button", 0);
-	snprintf(buf, 128, "ACTION=%s", event->action);
-	add_msg(event, buf, 0);
-	snprintf(buf, 128, "BUTTON=%s", event->name);
-	add_msg(event, buf, 0);
-	snprintf(buf, 128, "SEEN=%ld", event->seen);
-	add_msg(event, buf, 0);
-	snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-	add_msg(event, buf, 0);
-
-	return 0;
-}
-
-
-static irqreturn_t button_handler(int irq, void *dev_id)
-{
-	struct button_t *b;
-	u32 in, changed;
-
-	in = bcm47xx_gpio_in(~0) & platform.button_mask;
-	bcm47xx_gpio_polarity(platform.button_mask, in);
-	changed = platform.button_polarity ^ in;
-	platform.button_polarity = in;
-
-	changed &= ~bcm47xx_gpio_outen(0, 0);
-
-	for (b = platform.buttons; b->name; b++) {
-		struct event_t *event;
-
-		if (!(b->gpio & changed)) continue;
-
-		b->pressed ^= 1;
-
-		if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
-			event->seen = (jiffies - b->seen)/HZ;
-			event->name = b->name;
-			event->action = b->pressed ? "pressed" : "released";
-			INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-			schedule_work(&event->wq);
-		}
-
-		b->seen = jiffies;
-	}
-	return IRQ_HANDLED;
-}
-
-static void register_leds(struct led_t *l)
-{
-	struct proc_dir_entry *p;
-	u32 mask = 0;
-	u32 oe_mask = 0;
-	u32 val = 0;
-
-	leds = proc_mkdir("led", diag);
-	if (!leds)
-		return;
-
-	for(; l->name; l++) {
-		if (l->gpio & gpiomask)
-			continue;
-
-		switch (l->gpio & GPIO_TYPE_MASK) {
-		case GPIO_TYPE_EXTIF:
-			l->state = 0;
-			set_led_extif(l);
-			break;
-		case GPIO_TYPE_SHIFT:
-			mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
-			oe_mask |= (SHIFTREG_DATA | SHIFTREG_CLK);
-			l->state = (l->polarity != NORMAL);
-			set_led_shift(l);
-			break;
-		case GPIO_TYPE_NORMAL:
-		default:
-			if (l->polarity != INPUT) oe_mask |= l->gpio;
-			mask |= l->gpio;
-			val |= (l->polarity == NORMAL)?0:l->gpio;
-			break;
-		}
-
-		if (l->polarity == INPUT) continue;
-
-		if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
-			l->proc.type = PROC_LED;
-			l->proc.ptr = l;
-			p->data = (void *) &l->proc;
-			p->proc_fops = &diag_proc_fops;
-		}
-	}
-
-	bcm47xx_gpio_outen(mask, oe_mask);
-	bcm47xx_gpio_control(mask, 0);
-	bcm47xx_gpio_out(mask, val);
-	bcm47xx_gpio_intmask(mask, 0);
-}
-
-static void unregister_leds(struct led_t *l)
-{
-	for(; l->name; l++)
-		remove_proc_entry(l->name, leds);
-
-	remove_proc_entry("led", diag);
-}
-
-static void set_led_extif(struct led_t *led)
-{
-	volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
-	if (led->state)
-		*addr = 0xFF;
-	else
-		*addr;
-}
-
-/*
- * This should be extended to allow the platform to specify the pins and width
- * of the shift register. They're hardcoded for now because only the WNDR3700v3
- * uses it.
- */
-static void shiftreg_output(unsigned int val)
-{
-	unsigned int mask;
-
-	bcm47xx_gpio_out(SHIFTREG_DATA, SHIFTREG_DATA); /* init off, pull high */
-	bcm47xx_gpio_out(SHIFTREG_CLK, 0); /* init reset */
-
-	/* shift 8 times */
-	for(mask = 1 << (SHIFTREG_MAX_BITS-1); mask; mask >>= 1)
-	{
-		bcm47xx_gpio_out(SHIFTREG_DATA, (val & mask) ? SHIFTREG_DATA : 0);
-		bcm47xx_gpio_out(SHIFTREG_CLK, SHIFTREG_CLK); /* pull high to trigger */
-		bcm47xx_gpio_out(SHIFTREG_CLK, 0); /* reset to low */
-	}
-}
-
-static void set_led_shift(struct led_t *led)
-{
-	static u32	shiftreg = 0;
-	u32			old = shiftreg;
-	u32			pin = (led->gpio & ~GPIO_TYPE_MASK);
-
-	if (led->state) {
-		shiftreg |= pin;
-	} else {
-		shiftreg &= ~pin;
-	}
-
-	/* Clock the bits out. */
-	if (shiftreg != old) {
-		shiftreg_output(shiftreg);
-	}
-}
-
-
-static void led_flash(unsigned long dummy) {
-	struct led_t *l;
-	u32 mask = 0;
-	u8 extif_blink = 0;
-
-	for (l = platform.leds; l->name; l++) {
-		if (!l->flash) continue;
-		switch (l->gpio & GPIO_TYPE_MASK) {
-		case GPIO_TYPE_EXTIF:
-			extif_blink = 1;
-			l->state = !l->state;
-			set_led_extif(l);
-			break;
-		case GPIO_TYPE_SHIFT:
-			extif_blink = 1;
-			l->state = !l->state;
-			set_led_shift(l);
-			break;
-		case GPIO_TYPE_NORMAL:
-		default:
-			mask |= l->gpio;
-			break;
-		}
-	}
-
-	mask &= ~gpiomask;
-	if (mask) {
-		u32 val = ~bcm47xx_gpio_in(~0);
-
-		bcm47xx_gpio_outen(mask, mask);
-		bcm47xx_gpio_control(mask, 0);
-		bcm47xx_gpio_out(mask, val);
-	}
-	if (mask || extif_blink) {
-		mod_timer(&led_timer, jiffies + FLASH_TIME);
-	}
-}
-
-static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
-	struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-	char *page;
-	int len = 0;
-
-	if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
-		return -ENOBUFS;
-
-	if (dent->data != NULL) {
-		struct prochandler_t *handler = (struct prochandler_t *) dent->data;
-		switch (handler->type) {
-			case PROC_LED: {
-				struct led_t * led = (struct led_t *) handler->ptr;
-				u8 p = (led->polarity == NORMAL ? 0 : 1);
-				if (led->flash) {
-					len = sprintf(page, "f\n");
-				} else if ((led->gpio & GPIO_TYPE_MASK) != GPIO_TYPE_NORMAL) {
-					len = sprintf(page, "%d\n", ((led->state ^ p) ? 1 : 0));
-				} else {
-					u32 in = (bcm47xx_gpio_in(~0) & led->gpio ? 1 : 0);
-					len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
-				}
-				break;
-			}
-			case PROC_MODEL:
-				len = sprintf(page, "%s\n", platform.name);
-				break;
-			case PROC_GPIOMASK:
-				len = sprintf(page, "0x%04x\n", gpiomask);
-				break;
-		}
-	}
-	len += 1;
-
-	if (*ppos < len) {
-		len = min_t(int, len - *ppos, count);
-		if (copy_to_user(buf, (page + *ppos), len)) {
-			kfree(page);
-			return -EFAULT;
-		}
-		*ppos += len;
-	} else {
-		len = 0;
-	}
-
-	kfree(page);
-	return len;
-}
-
-
-static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-{
-	struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
-	char *page;
-	int ret = -EINVAL;
-
-	if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
-		return -ENOBUFS;
-
-	if (copy_from_user(page, buf, count)) {
-		kfree(page);
-		return -EINVAL;
-	}
-	page[count] = 0;
-
-	if (dent->data != NULL) {
-		struct prochandler_t *handler = (struct prochandler_t *) dent->data;
-		switch (handler->type) {
-			case PROC_LED: {
-				struct led_t *led = (struct led_t *) handler->ptr;
-				int p = (led->polarity == NORMAL ? 0 : 1);
-
-				if (page[0] == 'f') {
-					led->flash = 1;
-					led_flash(0);
-				} else {
-					led->flash = 0;
-					if ((led->gpio & GPIO_TYPE_MASK) == GPIO_TYPE_EXTIF) {
-						led->state = p ^ ((page[0] == '1') ? 1 : 0);
-						set_led_extif(led);
-					} else if ((led->gpio & GPIO_TYPE_MASK) == GPIO_TYPE_SHIFT) {
-						led->state = p ^ ((page[0] == '1') ? 1 : 0);
-						set_led_shift(led);
-					} else {
-						bcm47xx_gpio_outen(led->gpio, led->gpio);
-						bcm47xx_gpio_control(led->gpio, 0);
-						bcm47xx_gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
-					}
-				}
-				break;
-			}
-			case PROC_GPIOMASK:
-				gpiomask = simple_strtoul(page, NULL, 0);
-
-				if (platform.buttons) {
-					unregister_buttons(platform.buttons);
-					register_buttons(platform.buttons);
-				}
-
-				if (platform.leds) {
-					unregister_leds(platform.leds);
-					register_leds(platform.leds);
-				}
-				break;
-		}
-		ret = count;
-	}
-
-	kfree(page);
-	return ret;
-}
-
-static int __init diag_init(void)
-{
-	static struct proc_dir_entry *p;
-	static struct platform_t *detected;
-
-	detected = platform_detect();
-	if (!detected) {
-		printk(MODULE_NAME ": Router model not detected.\n");
-		return -ENODEV;
-	}
-	memcpy(&platform, detected, sizeof(struct platform_t));
-
-	printk(MODULE_NAME ": Detected '%s'\n", platform.name);
-	if (platform.platform_init != NULL) {
-		platform.platform_init();
-	}
-
-	if (!(diag = proc_mkdir("diag", NULL))) {
-		printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
-		return -EINVAL;
-	}
-
-	if ((p = create_proc_entry("model", S_IRUSR, diag))) {
-		p->data = (void *) &proc_model;
-		p->proc_fops = &diag_proc_fops;
-	}
-
-	if ((p = create_proc_entry("gpiomask", S_IRUSR | S_IWUSR, diag))) {
-		p->data = (void *) &proc_gpiomask;
-		p->proc_fops = &diag_proc_fops;
-	}
-
-	if (platform.buttons)
-		register_buttons(platform.buttons);
-
-	if (platform.leds)
-		register_leds(platform.leds);
-
-	return 0;
-}
-
-static void __exit diag_exit(void)
-{
-	del_timer(&led_timer);
-
-	if (platform.buttons)
-		unregister_buttons(platform.buttons);
-
-	if (platform.leds)
-		unregister_leds(platform.leds);
-
-	remove_proc_entry("model", diag);
-	remove_proc_entry("gpiomask", diag);
-	remove_proc_entry("diag", NULL);
-}
-
-module_init(diag_init);
-module_exit(diag_exit);
-
-MODULE_AUTHOR("Mike Baker, Felix Fietkau / OpenWrt.org");
-MODULE_LICENSE("GPL");
diff --git a/package/broadcom-diag/src/diag.h b/package/broadcom-diag/src/diag.h
deleted file mode 100644
index d9b5b006fe..0000000000
--- a/package/broadcom-diag/src/diag.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * diag.h - GPIO interface driver for Broadcom boards
- *
- * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
- *                    Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/irq.h>
-#define MODULE_NAME "diag"
-
-#define MAX_GPIO 16
-#define FLASH_TIME HZ/6
-
-enum polarity_t {
-	REVERSE = 0,
-	NORMAL = 1,
-	INPUT = 2,
-};
-
-enum {
-	PROC_BUTTON,
-	PROC_LED,
-	PROC_MODEL,
-	PROC_GPIOMASK
-};
-
-struct prochandler_t {
-	int type;
-	void *ptr;
-};
-
-struct button_t {
-	struct prochandler_t proc;
-	char *name;
-	u32 gpio;
-	unsigned long seen;
-	u8 pressed;
-};
-
-struct led_t {
-	struct prochandler_t proc;
-	char *name;
-	u32 gpio;
-	u8 polarity;
-	u8 flash;
-	u8 state;
-};
-
-struct platform_t {
-	char *name;
-
-	struct button_t buttons[MAX_GPIO];
-	u32 button_mask;
-	u32 button_polarity;
-	void (*platform_init)(void);
-
-	struct led_t leds[MAX_GPIO];
-};
-
-struct event_t {
-	struct work_struct wq;
-	unsigned long seen;
-	char *name, *action;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-	struct sk_buff *skb;
-#else
-	char *scratch;
-	char *argv[4];
-	char *envp[7];
-	u8 enr, anr;
-#endif
-};
-
-extern char *nvram_get(char *str);
-
-static struct platform_t platform;
-
-/* buttons */
-
-static void register_buttons(struct button_t *b);
-static void unregister_buttons(struct button_t *b);
-
-static void hotplug_button(struct work_struct *work);
-static irqreturn_t button_handler(int irq, void *dev_id);
-
-/* leds */
-
-static void register_leds(struct led_t *l);
-static void unregister_leds(struct led_t *l);
-
-static void set_led_extif(struct led_t *led);
-static void set_led_shift(struct led_t *led);
-static void led_flash(unsigned long dummy);
-
-/* 2.4 compatibility */
-#ifndef TIMER_INITIALIZER
-#define TIMER_INITIALIZER(_function, _expires, _data) \
-	{ \
-		/* _expires and _data currently unused */ \
-		function: _function \
-	}
-#endif
-
-static struct timer_list led_timer = TIMER_INITIALIZER(&led_flash, 0, 0);
-
-/* proc */
-
-static struct proc_dir_entry *diag, *leds;
-
-static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
-static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos);
-
-static struct file_operations diag_proc_fops = {
-	read: diag_proc_read,
-	write: diag_proc_write
-};
-
-static struct prochandler_t proc_model = { .type = PROC_MODEL };
-static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
-
diff --git a/package/broadcom-diag/src/gpio.h b/package/broadcom-diag/src/gpio.h
deleted file mode 100644
index 8bd3fe02f8..0000000000
--- a/package/broadcom-diag/src/gpio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __DIAG_GPIO_H
-#define __DIAG_GPIO_H
-
-#include <linux/interrupt.h>
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/gpio.h>
-#include <bcm47xx.h>
-
-#define EXTIF_ADDR 0x1f000000
-#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
-
-/* GPIO pins driving LEDs through a shift register */
-#define SHIFTREG_DATA		(1 << 6)
-#define SHIFTREG_CLK		(1 << 7)
-#define SHIFTREG_MAX_BITS	8
-
-#define GPIO_TYPE_NORMAL	(0x0 << 24)
-#define GPIO_TYPE_EXTIF 	(0x1 << 24)
-#define GPIO_TYPE_SHIFT		(0x2 << 24)
-#define GPIO_TYPE_MASK  	(0xf << 24)
-
-#endif /* __DIAG_GPIO_H */