aboutsummaryrefslogtreecommitdiffstats
path: root/package/broadcom-57xx/src/bcmrobo.c
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
commitddd809f9e56e3a30d459d6189a1582808d204821 (patch)
tree42452684184365d849557d88c0a7155f32287ad3 /package/broadcom-57xx/src/bcmrobo.c
parent20937ce81a7807fb3506728edaaff731cee7e18c (diff)
downloadupstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.gz
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.bz2
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.zip
(6/6) bcm57xx: package
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11471
Diffstat (limited to 'package/broadcom-57xx/src/bcmrobo.c')
-rw-r--r--package/broadcom-57xx/src/bcmrobo.c1329
1 files changed, 1329 insertions, 0 deletions
diff --git a/package/broadcom-57xx/src/bcmrobo.c b/package/broadcom-57xx/src/bcmrobo.c
new file mode 100644
index 0000000000..72824f6f62
--- /dev/null
+++ b/package/broadcom-57xx/src/bcmrobo.c
@@ -0,0 +1,1329 @@
+/*
+ * Broadcom BCM5325E/536x switch configuration module
+ *
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based on:
+ * Broadcom 53xx RoboSwitch device driver.
+ *
+ * Copyright 2007, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ */
+
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+
+#include <typedefs.h>
+#include <osl.h>
+#include <sbutils.h>
+#include <sbconfig.h>
+#include <bcmendian.h>
+#include "bcmparams.h"
+#include <bcmnvram.h>
+#include <bcmdevs.h>
+#include "bcmrobo.h"
+#include "proto/ethernet.h"
+#include <switch-core.h>
+
+#define DRIVER_NAME "bcm57xx"
+#define DRIVER_VERSION "0.1"
+
+#ifndef GPIO_PIN_NOTDEFINED
+#define GPIO_PIN_NOTDEFINED 0x20
+#endif
+
+#ifdef BCMDBG
+#define ET_ERROR(args) printk args
+#else /* BCMDBG */
+#define ET_ERROR(args)
+#endif /* BCMDBG */
+#define ET_MSG(args)
+
+/*
+ * Switch can be programmed through SPI interface, which
+ * has a rreg and a wreg functions to read from and write to
+ * registers.
+ */
+
+/* MII access registers */
+#define PSEUDO_PHYAD 0x1E /* MII Pseudo PHY address */
+#define REG_MII_PAGE 0x10 /* MII Page register */
+#define REG_MII_ADDR 0x11 /* MII Address register */
+#define REG_MII_DATA0 0x18 /* MII Data register 0 */
+#define REG_MII_DATA1 0x19 /* MII Data register 1 */
+#define REG_MII_DATA2 0x1a /* MII Data register 2 */
+#define REG_MII_DATA3 0x1b /* MII Data register 3 */
+
+/* Page numbers */
+#define PAGE_CTRL 0x00 /* Control page */
+#define PAGE_MMR 0x02 /* 5397 Management/Mirroring page */
+#define PAGE_VTBL 0x05 /* ARL/VLAN Table access page */
+#define PAGE_VLAN 0x34 /* VLAN page */
+
+/* Control page registers */
+#define REG_CTRL_PORT0 0x00 /* Port 0 traffic control register */
+#define REG_CTRL_PORT1 0x01 /* Port 1 traffic control register */
+#define REG_CTRL_PORT2 0x02 /* Port 2 traffic control register */
+#define REG_CTRL_PORT3 0x03 /* Port 3 traffic control register */
+#define REG_CTRL_PORT4 0x04 /* Port 4 traffic control register */
+#define REG_CTRL_PORT5 0x05 /* Port 5 traffic control register */
+#define REG_CTRL_PORT6 0x06 /* Port 6 traffic control register */
+#define REG_CTRL_PORT7 0x07 /* Port 7 traffic control register */
+#define REG_CTRL_MODE 0x0B /* Switch Mode register */
+#define REG_CTRL_MIIPO 0x0E /* 5325: MII Port Override register */
+#define REG_CTRL_SRST 0x79 /* Software reset control register */
+
+#define REG_DEVICE_ID 0x30 /* 539x Device id: */
+#define DEVID5325 0x25 /* 5325 (Not really be we fake it) */
+#define DEVID5395 0x95 /* 5395 */
+#define DEVID5397 0x97 /* 5397 */
+#define DEVID5398 0x98 /* 5398 */
+
+/* VLAN page registers */
+#define REG_VLAN_CTRL0 0x00 /* VLAN Control 0 register */
+#define REG_VLAN_CTRL1 0x01 /* VLAN Control 1 register */
+#define REG_VLAN_CTRL4 0x04 /* VLAN Control 4 register */
+#define REG_VLAN_CTRL5 0x05 /* VLAN Control 5 register */
+#define REG_VLAN_ACCESS 0x06 /* VLAN Table Access register */
+#define REG_VLAN_WRITE 0x08 /* VLAN Write register */
+#define REG_VLAN_READ 0x0C /* VLAN Read register */
+#define REG_VLAN_PTAG0 0x10 /* VLAN Default Port Tag register - port 0 */
+#define REG_VLAN_PTAG1 0x12 /* VLAN Default Port Tag register - port 1 */
+#define REG_VLAN_PTAG2 0x14 /* VLAN Default Port Tag register - port 2 */
+#define REG_VLAN_PTAG3 0x16 /* VLAN Default Port Tag register - port 3 */
+#define REG_VLAN_PTAG4 0x18 /* VLAN Default Port Tag register - port 4 */
+#define REG_VLAN_PTAG5 0x1a /* VLAN Default Port Tag register - port 5 */
+#define REG_VLAN_PTAG6 0x1c /* VLAN Default Port Tag register - port 6 */
+#define REG_VLAN_PTAG7 0x1e /* VLAN Default Port Tag register - port 7 */
+#define REG_VLAN_PTAG8 0x20 /* 539x: VLAN Default Port Tag register - IMP port */
+#define REG_VLAN_PMAP 0x20 /* 5325: VLAN Priority Re-map register */
+
+#define VLAN_NUMVLANS 16 /* # of VLANs */
+
+
+/* ARL/VLAN Table Access page registers */
+#define REG_VTBL_CTRL 0x00 /* ARL Read/Write Control */
+#define REG_VTBL_MINDX 0x02 /* MAC Address Index */
+#define REG_VTBL_VINDX 0x08 /* VID Table Index */
+#define REG_VTBL_ARL_E0 0x10 /* ARL Entry 0 */
+#define REG_VTBL_ARL_E1 0x18 /* ARL Entry 1 */
+#define REG_VTBL_DAT_E0 0x18 /* ARL Table Data Entry 0 */
+#define REG_VTBL_SCTRL 0x20 /* ARL Search Control */
+#define REG_VTBL_SADDR 0x22 /* ARL Search Address */
+#define REG_VTBL_SRES 0x24 /* ARL Search Result */
+#define REG_VTBL_SREXT 0x2c /* ARL Search Result */
+#define REG_VTBL_VID_E0 0x30 /* VID Entry 0 */
+#define REG_VTBL_VID_E1 0x32 /* VID Entry 1 */
+#define REG_VTBL_PREG 0xFF /* Page Register */
+#define REG_VTBL_ACCESS 0x60 /* VLAN table access register */
+#define REG_VTBL_INDX 0x61 /* VLAN table address index register */
+#define REG_VTBL_ENTRY 0x63 /* VLAN table entry register */
+#define REG_VTBL_ACCESS_5395 0x80 /* VLAN table access register */
+#define REG_VTBL_INDX_5395 0x81 /* VLAN table address index register */
+#define REG_VTBL_ENTRY_5395 0x83 /* VLAN table entry register */
+
+/* SPI registers */
+#define REG_SPI_PAGE 0xff /* SPI Page register */
+
+/* Access switch registers through GPIO/SPI */
+
+/* Minimum timing constants */
+#define SCK_EDGE_TIME 2 /* clock edge duration - 2us */
+#define MOSI_SETUP_TIME 1 /* input setup duration - 1us */
+#define SS_SETUP_TIME 1 /* select setup duration - 1us */
+
+/* misc. constants */
+#define SPI_MAX_RETRY 100
+
+static int config_attach(robo_info_t *robo);
+static void config_detach(robo_info_t *robo);
+
+/* Enable GPIO access to the chip */
+static void
+gpio_enable(robo_info_t *robo)
+{
+ /* Enable GPIO outputs with SCK and MOSI low, SS high */
+ sb_gpioout(robo->sbh, robo->ss | robo->sck | robo->mosi, robo->ss, GPIO_DRV_PRIORITY);
+ sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi,
+ robo->ss | robo->sck | robo->mosi, GPIO_DRV_PRIORITY);
+}
+
+/* Disable GPIO access to the chip */
+static void
+gpio_disable(robo_info_t *robo)
+{
+ /* Disable GPIO outputs with all their current values */
+ sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi, 0, GPIO_DRV_PRIORITY);
+}
+
+/* Write a byte stream to the chip thru SPI */
+static int
+spi_write(robo_info_t *robo, uint8 *buf, uint len)
+{
+ uint i;
+ uint8 mask;
+
+ /* Byte bang from LSB to MSB */
+ for (i = 0; i < len; i++) {
+ /* Bit bang from MSB to LSB */
+ for (mask = 0x80; mask; mask >>= 1) {
+ /* Clock low */
+ sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
+ OSL_DELAY(SCK_EDGE_TIME);
+
+ /* Sample on rising edge */
+ if (mask & buf[i])
+ sb_gpioout(robo->sbh, robo->mosi, robo->mosi, GPIO_DRV_PRIORITY);
+ else
+ sb_gpioout(robo->sbh, robo->mosi, 0, GPIO_DRV_PRIORITY);
+ OSL_DELAY(MOSI_SETUP_TIME);
+
+ /* Clock high */
+ sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
+ OSL_DELAY(SCK_EDGE_TIME);
+ }
+ }
+
+ return 0;
+}
+
+/* Read a byte stream from the chip thru SPI */
+static int
+spi_read(robo_info_t *robo, uint8 *buf, uint len)
+{
+ uint i, timeout;
+ uint8 rack, mask, byte;
+
+ /* Timeout after 100 tries without RACK */
+ for (i = 0, rack = 0, timeout = SPI_MAX_RETRY; i < len && timeout;) {
+ /* Bit bang from MSB to LSB */
+ for (mask = 0x80, byte = 0; mask; mask >>= 1) {
+ /* Clock low */
+ sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
+ OSL_DELAY(SCK_EDGE_TIME);
+
+ /* Sample on falling edge */
+ if (sb_gpioin(robo->sbh) & robo->miso)
+ byte |= mask;
+
+ /* Clock high */
+ sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
+ OSL_DELAY(SCK_EDGE_TIME);
+ }
+ /* RACK when bit 0 is high */
+ if (!rack) {
+ rack = (byte & 1);
+ timeout--;
+ continue;
+ }
+ /* Byte bang from LSB to MSB */
+ buf[i] = byte;
+ i++;
+ }
+
+ if (timeout == 0) {
+ ET_ERROR(("spi_read: timeout"));
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Enable/disable SPI access */
+static void
+spi_select(robo_info_t *robo, uint8 spi)
+{
+ if (spi) {
+ /* Enable SPI access */
+ sb_gpioout(robo->sbh, robo->ss, 0, GPIO_DRV_PRIORITY);
+ } else {
+ /* Disable SPI access */
+ sb_gpioout(robo->sbh, robo->ss, robo->ss, GPIO_DRV_PRIORITY);
+ }
+ OSL_DELAY(SS_SETUP_TIME);
+}
+
+
+/* Select chip and page */
+static void
+spi_goto(robo_info_t *robo, uint8 page)
+{
+ uint8 reg8 = REG_SPI_PAGE; /* page select register */
+ uint8 cmd8;
+
+ /* Issue the command only when we are on a different page */
+ if (robo->page == page)
+ return;
+
+ robo->page = page;
+
+ /* Enable SPI access */
+ spi_select(robo, 1);
+
+ /* Select new page with CID 0 */
+ cmd8 = ((6 << 4) | /* normal SPI */
+ 1); /* write */
+ spi_write(robo, &cmd8, 1);
+ spi_write(robo, &reg8, 1);
+ spi_write(robo, &page, 1);
+
+ /* Disable SPI access */
+ spi_select(robo, 0);
+}
+
+/* Write register thru SPI */
+static int
+spi_wreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
+{
+ int status = 0;
+ uint8 cmd8;
+ union {
+ uint8 val8;
+ uint16 val16;
+ uint32 val32;
+ } bytes;
+
+ /* validate value length and buffer address */
+ ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
+ (len == 4 && !((int)val & 3)));
+
+ /* Select chip and page */
+ spi_goto(robo, page);
+
+ /* Enable SPI access */
+ spi_select(robo, 1);
+
+ /* Write with CID 0 */
+ cmd8 = ((6 << 4) | /* normal SPI */
+ 1); /* write */
+ spi_write(robo, &cmd8, 1);
+ spi_write(robo, &addr, 1);
+ switch (len) {
+ case 1:
+ bytes.val8 = *(uint8 *)val;
+ break;
+ case 2:
+ bytes.val16 = htol16(*(uint16 *)val);
+ break;
+ case 4:
+ bytes.val32 = htol32(*(uint32 *)val);
+ break;
+ }
+ spi_write(robo, (uint8 *)val, len);
+
+ ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, addr,
+ *(uint16 *)val, len));
+ /* Disable SPI access */
+ spi_select(robo, 0);
+ return status;
+}
+
+/* Read register thru SPI in fast SPI mode */
+static int
+spi_rreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
+{
+ int status = 0;
+ uint8 cmd8;
+ union {
+ uint8 val8;
+ uint16 val16;
+ uint32 val32;
+ } bytes;
+
+ /* validate value length and buffer address */
+ ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
+ (len == 4 && !((int)val & 3)));
+
+ /* Select chip and page */
+ spi_goto(robo, page);
+
+ /* Enable SPI access */
+ spi_select(robo, 1);
+
+ /* Fast SPI read with CID 0 and byte offset 0 */
+ cmd8 = (1 << 4); /* fast SPI */
+ spi_write(robo, &cmd8, 1);
+ spi_write(robo, &addr, 1);
+ status = spi_read(robo, (uint8 *)&bytes, len);
+ switch (len) {
+ case 1:
+ *(uint8 *)val = bytes.val8;
+ break;
+ case 2:
+ *(uint16 *)val = ltoh16(bytes.val16);
+ break;
+ case 4:
+ *(uint32 *)val = ltoh32(bytes.val32);
+ break;
+ }
+
+ ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, addr,
+ *(uint16 *)val, len));
+
+ /* Disable SPI access */
+ spi_select(robo, 0);
+ return status;
+}
+
+/* SPI/gpio interface functions */
+static dev_ops_t spigpio = {
+ gpio_enable,
+ gpio_disable,
+ spi_wreg,
+ spi_rreg,
+ "SPI (GPIO)"
+};
+
+
+/* Access switch registers through MII (MDC/MDIO) */
+
+#define MII_MAX_RETRY 100
+
+/* Write register thru MDC/MDIO */
+static int
+mii_wreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
+{
+ uint16 cmd16, val16,val48[3];
+ void *h = robo->h;
+ uint32 val64[2];
+ memset(val48,0,6);
+ memset(val64,0,8);
+ int i;
+ uint8 *ptr = (uint8 *)val;
+
+ /* validate value length and buffer address */
+ ASSERT(len == 1 || len == 6 || len == 8 ||
+ ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
+
+ ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, reg,
+ *(uint16 *)val, len));
+
+ /* set page number - MII register 0x10 */
+ if (robo->page != page) {
+ cmd16 = ((page << 8) | /* page number */
+ 1); /* mdc/mdio access enable */
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
+ robo->page = page;
+ }
+
+ switch (len) {
+ case 8:
+ val16 = ptr[7];
+ val16 = ((val16 << 8) | ptr[6]);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA3, val16);
+ /* FALLTHRU */
+
+ case 6:
+ val16 = ptr[5];
+ val16 = ((val16 << 8) | ptr[4]);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA2, val16);
+ val16 = ptr[3];
+ val16 = ((val16 << 8) | ptr[2]);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
+ val16 = ptr[1];
+ val16 = ((val16 << 8) | ptr[0]);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
+ break;
+
+ case 4:
+ val16 = (uint16)((*(uint32 *)val) >> 16);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
+ val16 = (uint16)(*(uint32 *)val);
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
+ break;
+
+ case 2:
+ val16 = *(uint16 *)val;
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
+ break;
+
+ case 1:
+ val16 = *(uint8 *)val;
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
+ break;
+ }
+
+ /* set register address - MII register 0x11 */
+ cmd16 = ((reg << 8) | /* register address */
+ 1); /* opcode write */
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
+
+ /* is operation finished? */
+ for (i = MII_MAX_RETRY; i > 0; i --) {
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
+ if ((val16 & 3) == 0)
+ break;
+ }
+
+ /* timed out */
+ if (!i) {
+ ET_ERROR(("mii_wreg: timeout"));
+ return -1;
+ }
+ return 0;
+}
+
+/* Read register thru MDC/MDIO */
+static int
+mii_rreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
+{
+ uint16 cmd16, val16;
+ void *h = robo->h;
+ int i;
+ uint8 *ptr = (uint8 *)val;
+
+ /* validate value length and buffer address */
+ ASSERT(len == 1 || len == 6 || len == 8 ||
+ ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
+
+ /* set page number - MII register 0x10 */
+ if (robo->page != page) {
+ cmd16 = ((page << 8) | /* page number */
+ 1); /* mdc/mdio access enable */
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
+ robo->page = page;
+ }
+
+ /* set register address - MII register 0x11 */
+ cmd16 = ((reg << 8) | /* register address */
+ 2); /* opcode read */
+ robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
+
+ /* is operation finished? */
+ for (i = MII_MAX_RETRY; i > 0; i --) {
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
+ if ((val16 & 3) == 0)
+ break;
+ }
+ /* timed out */
+ if (!i) {
+ ET_ERROR(("mii_rreg: timeout"));
+ return -1;
+ }
+
+ ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, reg, val16, len));
+
+ switch (len) {
+ case 8:
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA3);
+ ptr[7] = (val16 >> 8);
+ ptr[6] = (val16 & 0xff);
+ /* FALLTHRU */
+
+ case 6:
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA2);
+ ptr[5] = (val16 >> 8);
+ ptr[4] = (val16 & 0xff);
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
+ ptr[3] = (val16 >> 8);
+ ptr[2] = (val16 & 0xff);
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
+ ptr[1] = (val16 >> 8);
+ ptr[0] = (val16 & 0xff);
+ break;
+
+ case 4:
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
+ *(uint32 *)val = (((uint32)val16) << 16);
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
+ *(uint32 *)val |= val16;
+ break;
+
+ case 2:
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
+ *(uint16 *)val = val16;
+ break;
+ case 1:
+ val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
+ *(uint8 *)val = (uint8)(val16 & 0xff);
+ break;
+ }
+
+ return 0;
+}
+
+/* MII interface functions */
+static dev_ops_t mdcmdio = {
+ NULL,
+ NULL,
+ mii_wreg,
+ mii_rreg,
+ "MII (MDC/MDIO)"
+};
+
+/* High level switch configuration functions. */
+
+static int
+findmatch(char *string, char *name)
+{
+ uint len;
+ char *c;
+
+ len = strlen(name);
+ /* CSTYLED */
+ while ((c = strchr(string, ',')) != NULL) {
+ if (len == (uint)(c - string) && !strncmp(string, name, len))
+ return 1;
+ string = c + 1;
+ }
+
+ return (!strcmp(string, name));
+}
+
+static uint
+getgpiopin(char *vars, char *pin_name, uint def_pin)
+{
+ char name[] = "gpioXXXX";
+ char *val;
+ uint pin;
+
+ /* Go thru all possibilities till a match in pin name */
+ for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
+ snprintf(name, sizeof(name), "gpio%d", pin);
+ val = getvar(vars, name);
+ if (val && findmatch(val, pin_name))
+ return pin;
+ }
+
+ if (def_pin != GPIO_PIN_NOTDEFINED) {
+ /* make sure the default pin is not used by someone else */
+ snprintf(name, sizeof(name), "gpio%d", def_pin);
+ if (getvar(vars, name)) {
+ def_pin = GPIO_PIN_NOTDEFINED;
+ }
+ }
+
+ return def_pin;
+}
+
+
+/* Port flags */
+#define FLAG_TAGGED 't' /* output tagged (external ports only) */
+#define FLAG_UNTAG 'u' /* input & output untagged (CPU port only, for OS (linux, ...) */
+#define FLAG_LAN '*' /* input & output untagged (CPU port only, for CFE */
+
+/* port descriptor */
+typedef struct {
+ uint32 untag; /* untag enable bit (Page 0x05 Address 0x63-0x66 Bit[17:9]) */
+ uint32 member; /* vlan member bit (Page 0x05 Address 0x63-0x66 Bit[7:0]) */
+ uint8 ptagr; /* port tag register address (Page 0x34 Address 0x10-0x1F) */
+ uint8 cpu; /* is this cpu port? */
+} pdesc_t;
+
+pdesc_t pdesc97[] = {
+ /* 5395/5397/5398 is 0 ~ 7. port 8 is IMP port. */
+ /* port 0 */ {1 << 9, 1 << 0, REG_VLAN_PTAG0, 0},
+ /* port 1 */ {1 << 10, 1 << 1, REG_VLAN_PTAG1, 0},
+ /* port 2 */ {1 << 11, 1 << 2, REG_VLAN_PTAG2, 0},
+ /* port 3 */ {1 << 12, 1 << 3, REG_VLAN_PTAG3, 0},
+ /* port 4 */ {1 << 13, 1 << 4, REG_VLAN_PTAG4, 0},
+ /* port 5 */ {1 << 14, 1 << 5, REG_VLAN_PTAG5, 0},
+ /* port 6 */ {1 << 15, 1 << 6, REG_VLAN_PTAG6, 0},
+ /* port 7 */ {1 << 16, 1 << 7, REG_VLAN_PTAG7, 0},
+ /* mii port */ {1 << 17, 1 << 8, REG_VLAN_PTAG8, 1},
+};
+
+pdesc_t pdesc25[] = {
+ /* port 0 */ {1 << 6, 1 << 0, REG_VLAN_PTAG0, 0},
+ /* port 1 */ {1 << 7, 1 << 1, REG_VLAN_PTAG1, 0},
+ /* port 2 */ {1 << 8, 1 << 2, REG_VLAN_PTAG2, 0},
+ /* port 3 */ {1 << 9, 1 << 3, REG_VLAN_PTAG3, 0},
+ /* port 4 */ {1 << 10, 1 << 4, REG_VLAN_PTAG4, 0},
+ /* mii port */ {1 << 11, 1 << 5, REG_VLAN_PTAG5, 1},
+};
+
+
+#define to_robo(driver) ((robo_info_t *) ((switch_driver *) driver)->priv)
+#define ROBO_START(driver) \
+ do { \
+ robo_info_t *robo = to_robo(driver); \
+ if (robo->ops->enable_mgmtif) \
+ robo->ops->enable_mgmtif(robo)
+
+#define ROBO_END(driver) \
+ if (robo->ops->disable_mgmtif) \
+ robo->ops->disable_mgmtif(robo); \
+ } while (0)
+
+int
+bcm_robo_reset(robo_info_t *robo)
+{
+ int i, max_port_ind;
+ uint8 val8;
+ uint16 val16;
+ uint32 val32;
+ pdesc_t *pdesc;
+ int pdescsz;
+
+/* printk(KERN_WARNING "bcmrobo.c: bcm_robo_reset\n"); */
+
+ if (robo->ops->enable_mgmtif)
+ robo->ops->enable_mgmtif(robo);
+
+ /* setup global vlan configuration, FIXME: necessary? */
+ /* VLAN Control 0 Register (Page 0x34, Address 0) */
+ val8 = ((1 << 7) | /* enable 802.1Q VLAN */
+ (3 << 5)); /* individual VLAN learning mode */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
+
+ /* VLAN Control 1 Register (Page 0x34, Address 1) */
+ robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
+ val8 |= ((1 << 2) | /* enable RSV multicast V Fwdmap */
+ (1 << 3)); /* enable RSV multicast V Untagmap */
+ if (robo->devid == DEVID5325)
+ val8 |= (1 << 1); /* enable RSV multicast V Tagging */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
+
+ bcm_robo_set_macaddr(robo, NULL);
+
+ if (robo->devid == DEVID5325) {
+ /* VLAN Control 4 Register (Page 0x34, Address 4) */
+ val8 = (1 << 6); /* drop frame with VID violation */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
+
+ /* VLAN Control 5 Register (Page 0x34, Address 5) */
+ val8 = (1 << 3); /* drop frame when miss V table */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
+
+ pdesc = pdesc25;
+ pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
+ } else {
+ pdesc = pdesc97;
+ pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
+ }
+
+ if (robo->devid == DEVID5325) {
+ /* setup priority mapping - applies to tagged ingress frames */
+ /* Priority Re-map Register (Page 0x34, Address 0x20-0x23) */
+ /* FIXME: un-hardcode */
+ val32 = ((0 << 0) | /* 0 -> 0 */
+ (1 << 3) | /* 1 -> 1 */
+ (2 << 6) | /* 2 -> 2 */
+ (3 << 9) | /* 3 -> 3 */
+ (4 << 12) | /* 4 -> 4 */
+ (5 << 15) | /* 5 -> 5 */
+ (6 << 18) | /* 6 -> 6 */
+ (7 << 21)); /* 7 -> 7 */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_PMAP, &val32, sizeof(val32));
+ }
+
+ /* Set unmanaged mode */
+ robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
+ val8 &= (~(1 << 0));
+ robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
+
+ /* No spanning tree for unmanaged mode */
+ val8 = 0;
+ max_port_ind = ((robo->devid == DEVID5398) ? REG_CTRL_PORT7 : REG_CTRL_PORT4);
+ for (i = REG_CTRL_PORT0; i <= max_port_ind; i++) {
+ robo->ops->write_reg(robo, PAGE_CTRL, i, &val8, sizeof(val8));
+ }
+
+ /* WAN port LED */
+ val16 = 0x1f;
+ robo->ops->write_reg(robo, PAGE_CTRL, 0x16, &val16, 2);
+
+ if (robo->ops->enable_mgmtif)
+ robo->ops->disable_mgmtif(robo);
+
+ return 0;
+}
+
+/* Get access to the RoboSwitch */
+robo_info_t *
+bcm_robo_attach(sb_t *sbh, void *h, char *name, char *vars, miird_f miird, miiwr_f miiwr)
+{
+ robo_info_t *robo;
+ uint32 reset, idx;
+ uint8 val8;
+ uint16 val16;
+
+ /* Allocate and init private state */
+ if (!(robo = MALLOC(sb_osh(sbh), sizeof(robo_info_t)))) {
+ ET_ERROR(("robo_attach: out of memory, malloced %d bytes", MALLOCED(sb_osh(sbh))));
+ return NULL;
+ }
+ bzero(robo, sizeof(robo_info_t));
+
+ robo->h = h;
+ robo->sbh = sbh;
+ robo->vars = vars;
+ robo->miird = miird;
+ robo->miiwr = miiwr;
+ robo->page = -1;
+ robo->name = name;
+
+ /* Trigger external reset by nvram variable existance */
+ if ((reset = getgpiopin(robo->vars, "robo_reset", GPIO_PIN_NOTDEFINED)) !=
+ GPIO_PIN_NOTDEFINED) {
+ /*
+ * Reset sequence: RESET low(50ms)->high(20ms)
+ *
+ * We have to perform a full sequence for we don't know how long
+ * it has been from power on till now.
+ */
+ ET_MSG(("%s: Using external reset in gpio pin %d\n", __FUNCTION__, reset));
+ reset = 1 << reset;
+
+ /* Keep RESET low for 50 ms */
+ sb_gpioout(robo->sbh, reset, 0, GPIO_DRV_PRIORITY);
+ sb_gpioouten(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
+ bcm_mdelay(50);
+
+ if (robo->devid == DEVID5395)
+ nvram_set("switch_type", "BCM5395");
+ else if(robo->devid == DEVID5397)
+ nvram_set("switch_type", "BCM5397");
+ else
+ nvram_set("switch_type", "unknown");
+
+ /* Keep RESET high for at least 20 ms */
+ sb_gpioout(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
+ bcm_mdelay(20);
+ } else {
+ /* In case we need it */
+ idx = sb_coreidx(robo->sbh);
+
+ if (sb_setcore(robo->sbh, SB_ROBO, 0)) {
+ /* If we have an internal robo core, reset it using sb_core_reset */
+ ET_MSG(("%s: Resetting internal robo core\n", __FUNCTION__));
+ sb_core_reset(robo->sbh, 0, 0);
+ }
+
+ sb_setcoreidx(robo->sbh, idx);
+ }
+
+ if (miird && miiwr) {
+ uint16 tmp;
+ int rc, retry_count = 0;
+
+ /* Read the PHY ID */
+ tmp = miird(h, PSEUDO_PHYAD, 2);
+ if (tmp != 0xffff) {
+ do {
+ rc = mii_rreg(robo, PAGE_MMR, REG_DEVICE_ID, \
+ &robo->devid, sizeof(uint16));
+ if (rc != 0)
+ break;
+ retry_count++;
+ } while ((robo->devid == 0) && (retry_count < 10));
+
+ ET_MSG(("%s: devid read %ssuccesfully via mii: 0x%x\n", __FUNCTION__, \
+ rc ? "un" : "", robo->devid));
+ ET_MSG(("%s: mii access to switch works\n", __FUNCTION__));
+ robo->ops = &mdcmdio;
+ if ((rc != 0) || (robo->devid == 0)) {
+ ET_MSG(("%s: error reading devid, assuming 5325e\n", __FUNCTION__));
+ robo->devid = DEVID5325;
+ }
+ ET_MSG(("%s: devid: 0x%x\n", __FUNCTION__, robo->devid));
+ }
+ }
+
+ if ((robo->devid == DEVID5395) ||
+ (robo->devid == DEVID5397) ||
+ (robo->devid == DEVID5398)) {
+ uint8 srst_ctrl;
+
+ /* If it is a 539x switch, use the soft reset register */
+ ET_MSG(("%s: Resetting 539x robo switch\n", __FUNCTION__));
+
+ /* Reset the 539x switch core and register file */
+ srst_ctrl = 0x83;
+ mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
+
+ bcm_mdelay(500);
+
+ srst_ctrl = 0x00;
+ mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
+ }
+
+ if (!robo->ops) {
+ int mosi, miso, ss, sck;
+
+ robo->ops = &spigpio;
+ robo->devid = DEVID5325;
+
+ /* Init GPIO mapping. Default 2, 3, 4, 5 */
+ ss = getgpiopin(vars, "robo_ss", 2);
+ if (ss == GPIO_PIN_NOTDEFINED) {
+ ET_ERROR(("robo_attach: robo_ss gpio fail: GPIO 2 in use"));
+ goto error;
+ }
+ robo->ss = 1 << ss;
+ sck = getgpiopin(vars, "robo_sck", 3);
+ if (sck == GPIO_PIN_NOTDEFINED) {
+ ET_ERROR(("robo_attach: robo_sck gpio fail: GPIO 3 in use"));
+ goto error;
+ }
+ robo->sck = 1 << sck;
+ mosi = getgpiopin(vars, "robo_mosi", 4);
+ if (mosi == GPIO_PIN_NOTDEFINED) {
+ ET_ERROR(("robo_attach: robo_mosi gpio fail: GPIO 4 in use"));
+ goto error;
+ }
+ robo->mosi = 1 << mosi;
+ miso = getgpiopin(vars, "robo_miso", 5);
+ if (miso == GPIO_PIN_NOTDEFINED) {
+ ET_ERROR(("robo_attach: robo_miso gpio fail: GPIO 5 in use"));
+ goto error;
+ }
+ robo->miso = 1 << miso;
+ ET_MSG(("%s: ss %d sck %d mosi %d miso %d\n", __FUNCTION__,
+ ss, sck, mosi, miso));
+ }
+
+ /* sanity check */
+ ASSERT(robo->ops);
+ ASSERT(robo->ops->write_reg);
+ ASSERT(robo->ops->read_reg);
+ ASSERT((robo->devid == DEVID5325) ||
+ (robo->devid == DEVID5395) ||
+ (robo->devid == DEVID5397) ||
+ (robo->devid == DEVID5398));
+
+ bcm_robo_reset(robo);
+ config_attach(robo);
+
+ return robo;
+
+error:
+ MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
+ return NULL;
+}
+
+/* Release access to the RoboSwitch */
+void
+bcm_robo_detach(robo_info_t *robo)
+{
+ config_detach(robo);
+ MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
+}
+
+/* Enable the device and set it to a known good state */
+int
+bcm_robo_enable_device(robo_info_t *robo)
+{
+ uint8 reg_offset, reg_val;
+ int ret = 0;
+
+ /* Enable management interface access */
+ if (robo->ops->enable_mgmtif)
+ robo->ops->enable_mgmtif(robo);
+
+ if (robo->devid == DEVID5398) {
+ /* Disable unused ports: port 6 and 7 */
+ for (reg_offset = REG_CTRL_PORT6; reg_offset <= REG_CTRL_PORT7; reg_offset ++) {
+ /* Set bits [1:0] to disable RX and TX */
+ reg_val = 0x03;
+ robo->ops->write_reg(robo, PAGE_CTRL, reg_offset, &reg_val,
+ sizeof(reg_val));
+ }
+ }
+
+ if (robo->devid == DEVID5325) {
+ /* Must put the switch into Reverse MII mode! */
+
+ /* MII port state override (page 0 register 14) */
+ robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val, sizeof(reg_val));
+
+ /* Bit 4 enables reverse MII mode */
+ if (!(reg_val & (1 << 4))) {
+ /* Enable RvMII */
+ reg_val |= (1 << 4);
+ robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val,
+ sizeof(reg_val));
+
+ /* Read back */
+ robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, &reg_val,
+ sizeof(reg_val));
+ if (!(reg_val & (1 << 4))) {
+ ET_ERROR(("robo_enable_device: enabling RvMII mode failed\n"));
+ ret = -1;
+ }
+ }
+ }
+
+ /* Disable management interface access */
+ if (robo->ops->disable_mgmtif)
+ robo->ops->disable_mgmtif(robo);
+
+ return ret;
+}
+
+
+void bcm_robo_set_macaddr(robo_info_t *robo, char *mac_addr)
+{
+ uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
+
+ if (mac_addr != NULL)
+ memcpy(robo->macaddr, mac_addr, 6);
+
+ mac_addr = robo->macaddr;
+
+ /* setup mac address */
+ arl_entry[0] = mac_addr[5];
+ arl_entry[1] = mac_addr[4];
+ arl_entry[2] = mac_addr[3];
+ arl_entry[3] = mac_addr[2];
+ arl_entry[4] = mac_addr[1];
+ arl_entry[5] = mac_addr[0];
+
+ if (robo->devid == DEVID5325) {
+ /* Init the entry 1 of the bin */
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
+ arl_entry1, sizeof(arl_entry1));
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
+ arl_entry1, 1);
+
+ /* Init the entry 0 of the bin */
+ arl_entry[6] = 0x8; /* Port Id: MII */
+ arl_entry[7] = 0xc0; /* Static Entry, Valid */
+
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
+ arl_entry, sizeof(arl_entry));
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
+ arl_entry, ETHER_ADDR_LEN);
+
+ } else {
+ /* Initialize the MAC Addr Index Register */
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
+ arl_entry, ETHER_ADDR_LEN);
+ }
+}
+
+static int handle_reset(void *driver, char *buf, int nr)
+{
+ ROBO_START(driver);
+ bcm_robo_reset(robo);
+ ROBO_END(driver);
+
+ return 0;
+}
+
+
+static int handle_enable_read(void *driver, char *buf, int nr)
+{
+ int ret;
+ uint8 val8;
+
+ ROBO_START(driver);
+ robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
+ ret = sprintf(buf, "%d\n", !!(val8 & (1 << 1)));
+ ROBO_END(driver);
+
+ return ret;
+}
+
+static int handle_enable_write(void *driver, char *buf, int nr)
+{
+ uint8 val8;
+
+/* printk(KERN_WARNING "bcmrobo.c: handle_enable_write\n"); */
+
+ ROBO_START(driver);
+ robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
+ val8 &= ~(1 << 1);
+ val8 |= ((buf[0] == '1') << 1);
+ robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
+ ROBO_END(driver);
+
+ return 0;
+}
+
+static int handle_enable_vlan_read(void *driver, char *buf, int nr)
+{
+ uint8 val8;
+
+ ROBO_START(driver);
+ robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
+ ROBO_END(driver);
+
+ return sprintf(buf, "%d\n", (((val8 & (1 << 7)) == (1 << 7)) ? 1 : 0));
+}
+static int handle_enable_vlan_write(void *driver, char *buf, int nr)
+{
+ int disable = ((buf[0] != '1') ? 1 : 0);
+
+ uint8 val8;
+ uint16 val16;
+ pdesc_t *pdesc;
+ int pdescsz;
+ uint16 vid;
+ uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
+
+/* printk(KERN_WARNING "bcmrobo.c: handle_enable_vlan_write\n"); */
+
+ ROBO_START(driver);
+
+ /* setup global vlan configuration */
+ /* VLAN Control 0 Register (Page 0x34, Address 0) */
+ val8 = disable ? 0 :
+ ((1 << 7) | /* enable/disable 802.1Q VLAN */
+ (3 << 5)); /* individual VLAN learning mode */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
+
+ /* VLAN Control 1 Register (Page 0x34, Address 1) */
+ val8 = disable ? 0 :
+ ((1 << 2) | /* enable/disable RSV multicast V Fwdmap */
+ (1 << 3)); /* enable/disable RSV multicast V Untagmap */
+ if (robo->devid == DEVID5325)
+ val8 |= disable ? 0 : (1 << 1); /* enable/disable RSV multicast V Tagging */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
+
+ if ( disable == 0 ) { /* FIXME: ok to stop here when disabling? */
+ arl_entry[0] = robo->macaddr[5];
+ arl_entry[1] = robo->macaddr[4];
+ arl_entry[2] = robo->macaddr[3];
+ arl_entry[3] = robo->macaddr[2];
+ arl_entry[4] = robo->macaddr[1];
+ arl_entry[5] = robo->macaddr[0];
+
+ if (robo->devid == DEVID5325) {
+ /* Init the entry 1 of the bin */
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
+ arl_entry1, sizeof(arl_entry1));
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
+ arl_entry1, 1);
+
+ /* Init the entry 0 of the bin */
+ arl_entry[6] = 0x8; /* Port Id: MII */
+ arl_entry[7] = 0xc0; /* Static Entry, Valid */
+
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
+ arl_entry, sizeof(arl_entry));
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
+ arl_entry, ETHER_ADDR_LEN);
+
+ /* VLAN Control 4 Register (Page 0x34, Address 4) */
+ val8 = (1 << 6); /* drop frame with VID violation */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
+
+ /* VLAN Control 5 Register (Page 0x34, Address 5) */
+ val8 = (1 << 3); /* drop frame when miss V table */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
+
+ pdesc = pdesc25;
+ pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
+ } else {
+ /* Initialize the MAC Addr Index Register */
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
+ arl_entry, ETHER_ADDR_LEN);
+
+ pdesc = pdesc97;
+ pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
+ }
+
+ /* setup each vlan. max. 16 vlans. */
+ /* force vlan id to be equal to vlan number */
+ for (vid = 0; vid < VLAN_NUMVLANS; vid ++) {
+
+ /* Add static ARL entries */
+ if (robo->devid == DEVID5325) {
+ val8 = vid;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E0, \
+ &val8, sizeof(val8));
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
+ &val8, sizeof(val8));
+
+ /* Write the entry */
+ val8 = 0x80;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
+ &val8, sizeof(val8));
+ /* Wait for write to complete */
+ SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
+ &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
+ 100 /* usec */);
+ } else {
+ /* Set the VLAN Id in VLAN ID Index Register */
+ val8 = vid;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
+ &val8, sizeof(val8));
+
+ /* Set the MAC addr and VLAN Id in ARL Table MAC/VID Entry 0
+ * Register.
+ */
+ arl_entry[6] = vid;
+ arl_entry[7] = 0x0;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
+ arl_entry, sizeof(arl_entry));
+
+ /* Set the Static bit , Valid bit and Port ID fields in
+ * ARL Table Data Entry 0 Register
+ */
+ val16 = 0xc008;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_DAT_E0, \
+ &val16, sizeof(val16));
+
+ /* Clear the ARL_R/W bit and set the START/DONE bit in
+ * the ARL Read/Write Control Register.
+ */
+ val8 = 0x80;
+ robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
+ &val8, sizeof(val8));
+ /* Wait for write to complete */
+ SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
+ &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
+ 100 /* usec */);
+ }
+ }
+ }
+
+ ROBO_END(driver);
+ return 0;
+}
+
+static int handle_vlan_port_read(void *driver, char *buf, int nr)
+{
+ /* FIXME: yeah, some work is missing here */
+ return sprintf(buf, "bcmrobo.c: handle_vlan_port_read unimplimented\n");
+}
+
+static int handle_vlan_port_write(void *driver, char *buf, int nr)
+{
+
+ switch_driver *d = (switch_driver *) driver;
+ switch_vlan_config *c = switch_parse_vlan(d, buf);
+
+ uint8 val8;
+ uint16 val16;
+ uint32 val32;
+ int j;
+ pdesc_t *pdesc;
+ int pdescsz;
+
+/* printk(KERN_WARNING "bcmrobo.c: handle_vlan_port_write, nr %d\n", nr); */
+
+ if (c == NULL)
+ return -EINVAL;
+
+ ROBO_START(driver);
+
+ if (robo->devid == DEVID5325) {
+ pdesc = pdesc25;
+ pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
+ } else {
+ pdesc = pdesc97;
+ pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
+ }
+
+
+ for (j = 0; j < d->ports; j++) {
+ if ((c->untag | c->pvid) & (1 << j))
+ if ((j != d->cpuport) || (c->untag & (1 << j))) {
+
+ /* change default vlan tag */
+
+/* printk(KERN_WARNING "bcmrobo.c: set default vlan tag, port %d -> vlan %d\n", j, nr); */
+
+ val16 = ((0 << 13) | /* priority - always 0 */
+ nr); /* vlan id */
+ robo->ops->write_reg(robo, PAGE_VLAN, pdesc[j].ptagr, &val16, sizeof(val16));
+ }
+ }
+
+
+ if (robo->devid == DEVID5325) {
+ val32 = ((c->untag << 6) | /* untag enable */
+ c->port); /* vlan members */
+ val32 |= ((1 << 20) | /* valid write */
+ ((nr >> 4) << 12)); /* vlan id bit[11:4] */
+ /* VLAN Write Register (Page 0x34, Address 0x08-0x0B) */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_WRITE, &val32,
+ sizeof(val32));
+ /* VLAN Table Access Register (Page 0x34, Address 0x06-0x07) */
+ val16 = ((1 << 13) | /* start command */
+ (1 << 12) | /* write state */
+ nr); /* vlan id */
+ robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_ACCESS, &val16,
+ sizeof(val16));
+ } else {
+ uint8 vtble, vtbli, vtbla;
+ val32 = ((c->untag << 9) | /* untag enable */
+ c->port); /* vlan members */
+
+ if (robo->devid == DEVID5395) {
+ vtble = REG_VTBL_ENTRY_5395;
+ vtbli = REG_VTBL_INDX_5395;
+ vtbla = REG_VTBL_ACCESS_5395;
+ } else {
+ vtble = REG_VTBL_ENTRY;
+ vtbli = REG_VTBL_INDX;
+ vtbla = REG_VTBL_ACCESS;
+ }
+
+ /* VLAN Table Entry Register (Page 0x05, Address 0x63-0x66/0x83-0x86) */
+ robo->ops->write_reg(robo, PAGE_VTBL, vtble, &val32,
+ sizeof(val32));
+ /* VLAN Table Address Index Reg (Page 0x05, Address 0x61-0x62/0x81-0x82) */
+ val16 = nr; /* vlan id */
+ robo->ops->write_reg(robo, PAGE_VTBL, vtbli, &val16,
+ sizeof(val16));
+
+ /* VLAN Table Access Register (Page 0x34, Address 0x60/0x80) */
+ val8 = ((1 << 7) | /* start command */
+ 0); /* write */
+ robo->ops->write_reg(robo, PAGE_VTBL, vtbla, &val8,
+ sizeof(val8));
+ }
+
+ ROBO_END(driver);
+ return 0;
+}
+
+static int __init config_attach(robo_info_t *robo)
+{
+ switch_config cfg[] = {
+ {"enable", handle_enable_read, handle_enable_write},
+ {"reset", NULL, handle_reset},
+ {"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
+ {NULL, NULL, NULL}
+ };
+ switch_config vlan[] = {
+ {"ports", handle_vlan_port_read, handle_vlan_port_write},
+ {NULL, NULL, NULL}
+ };
+ switch_driver driver = {
+ name: DRIVER_NAME,
+ version: DRIVER_VERSION,
+ interface: robo->name,
+ cpuport: 8,
+ ports: 9,
+ vlans: 16,
+ driver_handlers: cfg,
+ port_handlers: NULL,
+ vlan_handlers: vlan,
+ };
+ if (robo->devid == DEVID5325) {
+ driver.ports = 6;
+ driver.cpuport = 5;
+ }
+ driver.priv = (void *) robo;
+
+ return switch_register_driver(&driver);
+}
+
+static void __exit config_detach(robo_info_t *robo)
+{
+ switch_unregister_driver(DRIVER_NAME);
+}
+
+