(6/6) bcm57xx: package

This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11471

1 files changed, 46 insertions, 0 deletions

diff --git a/package/broadcom-57xx/src/5701rls.c b/package/broadcom-57xx/src/5701rls.c
new file mode 100644
index 0000000000..6b7d49c7a8
--- /dev/null
+++ b/package/broadcom-57xx/src/5701rls.c
@@ -0,0 +1,46 @@
+/******************************************************************************/
+/*                                                                            */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom  */
+/* Corporation.                                                               */
+/* All rights reserved.                                                       */
+/*                                                                            */
+/* This program is free software; you can redistribute it and/or modify       */
+/* it under the terms of the GNU General Public License as published by       */
+/* the Free Software Foundation, located in the file LICENSE.                 */
+/*                                                                            */
+/* History:                                                                   */
+/*                                                                            */
+/******************************************************************************/
+
+#ifdef INCLUDE_5701_AX_FIX
+
+#include "mm.h"
+#include "5701rls.h"
+
+LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice)
+{
+  T3_FWIMG_INFO FwImgInfo;
+
+  FwImgInfo.StartAddress = t3FwStartAddr;
+  FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText;
+  FwImgInfo.Text.Offset  = t3FwTextAddr;
+  FwImgInfo.Text.Length  = t3FwTextLen;
+  FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata;
+  FwImgInfo.ROnlyData.Offset  = t3FwRodataAddr;
+  FwImgInfo.ROnlyData.Length  = t3FwRodataLen;
+  FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData;
+  FwImgInfo.Data.Offset  = t3FwDataAddr;
+  FwImgInfo.Data.Length  = t3FwDataLen;
+
+  if (LM_LoadFirmware(pDevice,
+                      &FwImgInfo,
+                      T3_RX_CPU_ID | T3_TX_CPU_ID,
+                      T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
+    {
+      return LM_STATUS_FAILURE;
+    }
+  
+  return LM_STATUS_SUCCESS;
+}
+
+#endif /* INCLUDE_5701_AX_FIX */