aboutsummaryrefslogtreecommitdiffstats
path: root/package/broadcom-57xx/src/5701rls.c
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-06-15 11:11:28 +0000
commitddd809f9e56e3a30d459d6189a1582808d204821 (patch)
tree42452684184365d849557d88c0a7155f32287ad3 /package/broadcom-57xx/src/5701rls.c
parent20937ce81a7807fb3506728edaaff731cee7e18c (diff)
downloadupstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.gz
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.tar.bz2
upstream-ddd809f9e56e3a30d459d6189a1582808d204821.zip
(6/6) bcm57xx: package
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11471
Diffstat (limited to 'package/broadcom-57xx/src/5701rls.c')
-rw-r--r--package/broadcom-57xx/src/5701rls.c46
1 files changed, 46 insertions, 0 deletions
diff --git a/package/broadcom-57xx/src/5701rls.c b/package/broadcom-57xx/src/5701rls.c
new file mode 100644
index 0000000000..6b7d49c7a8
--- /dev/null
+++ b/package/broadcom-57xx/src/5701rls.c
@@ -0,0 +1,46 @@
+/******************************************************************************/
+/* */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
+/* Corporation. */
+/* All rights reserved. */
+/* */
+/* This program is free software; you can redistribute it and/or modify */
+/* it under the terms of the GNU General Public License as published by */
+/* the Free Software Foundation, located in the file LICENSE. */
+/* */
+/* History: */
+/* */
+/******************************************************************************/
+
+#ifdef INCLUDE_5701_AX_FIX
+
+#include "mm.h"
+#include "5701rls.h"
+
+LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice)
+{
+ T3_FWIMG_INFO FwImgInfo;
+
+ FwImgInfo.StartAddress = t3FwStartAddr;
+ FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText;
+ FwImgInfo.Text.Offset = t3FwTextAddr;
+ FwImgInfo.Text.Length = t3FwTextLen;
+ FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata;
+ FwImgInfo.ROnlyData.Offset = t3FwRodataAddr;
+ FwImgInfo.ROnlyData.Length = t3FwRodataLen;
+ FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData;
+ FwImgInfo.Data.Offset = t3FwDataAddr;
+ FwImgInfo.Data.Length = t3FwDataLen;
+
+ if (LM_LoadFirmware(pDevice,
+ &FwImgInfo,
+ T3_RX_CPU_ID | T3_TX_CPU_ID,
+ T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
+ {
+ return LM_STATUS_FAILURE;
+ }
+
+ return LM_STATUS_SUCCESS;
+}
+
+#endif /* INCLUDE_5701_AX_FIX */