aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
diff options
context:
space:
mode:
authorMartin Kennedy <hurricos@gmail.com>2022-09-18 12:15:57 -0400
committerHauke Mehrtens <hauke@hauke-m.de>2023-03-27 00:27:59 +0200
commit12f52336d2b18951d883af07f398fc9697adba24 (patch)
tree172fc77c68c6e0ddaab657616da58881966b2470 /package/boot
parent88d76bb455c8fdb525ac2495feda71c14a558296 (diff)
downloadupstream-12f52336d2b18951d883af07f398fc9697adba24.tar.gz
upstream-12f52336d2b18951d883af07f398fc9697adba24.tar.bz2
upstream-12f52336d2b18951d883af07f398fc9697adba24.zip
ath79: Add Aruba AP-175 support
This board is very similar to the Aruba AP-105, but is outdoor-first. It is very similar to the MSR2000 (though certain MSR2000 models have a different PHY[^1]). A U-Boot replacement is required to install OpenWrt on these devices[^2]. Specifications -------------- * Device: Aruba AP-175 * SoC: Atheros AR7161 680 MHz MIPS * RAM: 128MB - 2x Mira P3S12D40ETP * Flash: 16MB MXIC MX25L12845EMI-10G (SPI-NOR) * WiFi: 2 x DNMA-H92 Atheros AR9220-AC1A 802.11abgn * ETH: IC+ IP1001 Gigabit + PoE PHY * LED: 2x int., plus 12 ext. on TCA6416 GPIO expander * Console: CP210X linking USB-A Port to CPU console @ 115200 * RTC: DS1374C, with internal battery * Temp: LM75 temperature sensor Factory installation: - Needs a u-boot replacement. The process is almost identical to that of the AP105, except that the case is easier to open, and that you need to compile u-boot from a slightly different branch: https://github.com/Hurricos/u-boot-ap105/tree/ap175 The instructions for performing an in-circuit reflash with an SPI-Flasher like a CH314A can be found on the OpenWrt Wiki (https://openwrt.org/toh/aruba/ap-105); in addition a detailed guide may be found on YouTube[^3]. - Once u-boot has been replaced, a USB-A-to-A cable may be used to connect your PC to the CP210X inside the AP at 115200 baud; at this point, the normal u-boot serial flashing procedure will work (set up networking; tftpboot and boot an OpenWrt initramfs; sysupgrade to OpenWrt proper.) - There is no built-in functionality to revert back to stock firmware, because the AP-175 has been declared by the vendor[^4] end-of-life as of 31 Jul 2020. If for some reason you wish to return to stock firmware, take a backup of the 16MiB flash before flashing u-boot. [^1]: https://github.com/shalzz/aruba-ap-310/blob/master/platform/bootloader/apboot-11n/include/configs/msr2k.h#L186 [^2]: https://github.com/Hurricos/u-boot-ap105/tree/ap175 [^3]: https://www.youtube.com/watch?v=Vof__dPiprs [^4]: https://www.arubanetworks.com/support-services/end-of-life/#product=access-points&version=0 Signed-off-by: Martin Kennedy <hurricos@gmail.com>
Diffstat (limited to 'package/boot')
-rw-r--r--package/boot/uboot-envtools/files/ath7922
1 files changed, 12 insertions, 10 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index b968fa8fde..c7049f7029 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -88,6 +88,18 @@ ziking,cpe46b|\
zyxel,nbg6616)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
+aruba,ap-105|\
+aruba,ap-175|\
+dongwon,dw02-412h-64m|\
+dongwon,dw02-412h-128m|\
+glinet,gl-ar300m-lite|\
+glinet,gl-ar300m-nand|\
+glinet,gl-ar300m-nor|\
+glinet,gl-ar300m16)
+ idx="$(find_mtd_index u-boot-env)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
+ ;;
buffalo,wzr-hp-ag300h)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
;;
@@ -99,16 +111,6 @@ linksys,ea4500-v3)
domywifi,dw33d)
ubootenv_add_uci_config "/dev/mtd4" "0x0" "0x10000" "0x10000"
;;
-dongwon,dw02-412h-64m|\
-dongwon,dw02-412h-128m|\
-glinet,gl-ar300m-lite|\
-glinet,gl-ar300m-nand|\
-glinet,gl-ar300m-nor|\
-glinet,gl-ar300m16)
- idx="$(find_mtd_index u-boot-env)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
- ;;
glinet,gl-ar150)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
;;