diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2020-08-30 22:26:14 +0200 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2021-12-29 20:35:57 +0100 |
| commit | 4e46ae1f69b5ff1cf09b2e2eee69a7c38a00202d (patch) | |
| tree | 123368371db5c47f35bb28836f05b33e112fcdad /package/boot | |
| parent | 4e82a80b6857c8623c3b341637db7a96200e8652 (diff) | |
| download | upstream-4e46ae1f69b5ff1cf09b2e2eee69a7c38a00202d.tar.gz upstream-4e46ae1f69b5ff1cf09b2e2eee69a7c38a00202d.tar.bz2 upstream-4e46ae1f69b5ff1cf09b2e2eee69a7c38a00202d.zip | |
kirkwood: add support for NETGEAR ReadyNAS Duo v2
NETGEAR ReadyNAS Duo v2 is a NAS based on Marvell kirkwood SoC.
Specification:
- Processor Marvell 88F6282 (1.6 GHz)
- 256MB RAM
- 128MB NAND
- 1x GBE LAN port (PHY: Marvell 88E1318)
- 1x USB 2.0
- 2x USB 3.0
- 2x SATA
- 3x button
- 5x leds
- serial on J5 connector accessible from rear panel
(115200 8N1) (VCC,TX,RX,GND) (3V3 LOGIC!)
Installation by USB + serial:
- Copy initramfs image to fat32 usb drive
- Connect pendrive to USB 2.0 front socket
- Connect serial console
- Stop booting in u-boot
- Do:
usb reset
setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000'
saveenv
fatload usb 0:1 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage
bootm 0x1200000
- copy sysupgrade image via ssh.
- run sysupgrade
Installation by TFTP + serial:
- Setup TFTP server and copy initramfs image
- Connect serial console
- Stop booting in u-boot
- Do:
setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000'
saveenv
setenv serverip 192.168.1.1
setenv ipaddr 192.168.1.2
tftpboot 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage
bootm 0x1200000
- copy sysupgrade image via ssh.
- run sysupgrade
Known issues:
- Power button and PHY INTn pin are connected to the same GPIO. It
causes that every network restart button is pressed in system.
As workaround, button is used as regular BTN_1.
For more info please look at file:
RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
from Netgear GPL sources.
Tested-by: Raylynn Knight <rayknight@me.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'package/boot')
| -rw-r--r-- | package/boot/uboot-envtools/files/kirkwood | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/kirkwood b/package/boot/uboot-envtools/files/kirkwood index 6a3dfcaba8..240371f48d 100644 --- a/package/boot/uboot-envtools/files/kirkwood +++ b/package/boot/uboot-envtools/files/kirkwood @@ -19,6 +19,7 @@ globalscale,sheevaplug|\ iom,ix2-200|\ linksys,e4200-v2|\ linksys,ea4500|\ +netgear,readynas-duo-v2|\ raidsonic,ib-nas62x0|\ seagate,dockstar|\ zyxel,nsa310b|\ |