uboot-mvebu: update to v2021.01

u-boot now detects emmc variants at runtime, we don't need to build
seperate binaries anymore.

Signed-off-by: Andre Heider <a.heider@gmail.com>

3 files changed, 0 insertions, 523 deletions

diff --git a/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch b/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch
deleted file mode 100644
index 85c61098f8..0000000000
--- a/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From cdcfd9211c805624a702b6ff81b9bd9515344749 Mon Sep 17 00:00:00 2001
-From: Andre Heider <a.heider@gmail.com>
-Date: Fri, 4 Sep 2020 16:34:22 +0200
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: use Linux
- model/compatible strings
-
-Fix the actual board vendor and ease synching dts files from Linux.
-
-Signed-off-by: Andre Heider <a.heider@gmail.com>
----
- arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
- board/Marvell/mvebu_armada-37xx/board.c  | 8 ++++----
- 2 files changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm/dts/armada-3720-espressobin.dts
-+++ b/arch/arm/dts/armada-3720-espressobin.dts
-@@ -50,8 +50,8 @@
- #include "armada-372x.dtsi"
- 
- / {
--	model = "Marvell Armada 3720 Community Board ESPRESSOBin";
--	compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
-+	model = "Globalscale Marvell ESPRESSOBin Board";
-+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
---- a/board/Marvell/mvebu_armada-37xx/board.c
-+++ b/board/Marvell/mvebu_armada-37xx/board.c
-@@ -88,14 +88,14 @@ int board_late_init(void)
- 	if (env_get("fdtfile"))
- 		return 0;
- 
--	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
-+	if (!of_machine_is_compatible("globalscale,espressobin"))
- 		return 0;
- 
- 	/* If the memory controller has been configured for DDR4, we're running on v7 */
- 	ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
- 		& A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
- 
--	emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
-+	emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
- 
- 	if (ddr4 && emmc)
- 		env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
-@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(str
- /* Bring-up board-specific network stuff */
- int board_network_enable(struct mii_dev *bus)
- {
--	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
-+	if (!of_machine_is_compatible("globalscale,espressobin"))
- 		return 0;
- 
- 	/*
-@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd
- 	int part_off;
- 
- 	/* Fill SPI MTD partitions for Linux kernel on Espressobin */
--	if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
-+	if (!of_machine_is_compatible("globalscale,espressobin"))
- 		return 0;
- 
- 	spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
diff --git a/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch b/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch
deleted file mode 100644
index 1ca8b8d8dc..0000000000
--- a/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch
+++ /dev/null
@@ -1,368 +0,0 @@
-From a9ac1dd46a4fd11880be80227e1eb102e3c61dd8 Mon Sep 17 00:00:00 2001
-From: Andre Heider <a.heider@gmail.com>
-Date: Fri, 4 Sep 2020 15:38:58 +0200
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: split common parts
- to .dtsi
-
-Move most of the dts to the new common armada-3720-espressobin.dtsi
-file, just like Linux, but keep the current, downstream based, version.
-
-The dts itself is imported from Linux.
-
-Signed-off-by: Andre Heider <a.heider@gmail.com>
----
- arch/arm/dts/armada-3720-espressobin.dts  | 164 +--------------------
- arch/arm/dts/armada-3720-espressobin.dtsi | 167 ++++++++++++++++++++++
- 2 files changed, 174 insertions(+), 157 deletions(-)
- create mode 100644 arch/arm/dts/armada-3720-espressobin.dtsi
-
---- a/arch/arm/dts/armada-3720-espressobin.dts
-+++ b/arch/arm/dts/armada-3720-espressobin.dts
-@@ -1,170 +1,20 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- /*
-- * Device Tree file for Marvell Armada 3720 community board
-- * (ESPRESSOBin)
-+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
-  * Copyright (C) 2016 Marvell
-  *
-- * Gregory CLEMENT <gregory.clement@free-electrons.com>
-- * Konstantin Porotchkin <kostap@marvell.com>
-+ * Romain Perier <romain.perier@free-electrons.com>
-  *
-- * This file is dual-licensed: you can use it either under the terms
-- * of the GPL or the X11 license, at your option. Note that this dual
-- * licensing only applies to this file, and not this project as a
-- * whole.
-- *
-- *  a) This file is free software; you can redistribute it and/or
-- *     modify it under the terms of the GNU General Public License as
-- *     published by the Free Software Foundation; either version 2 of the
-- *     License, or (at your option) any later version.
-- *
-- *     This file is distributed in the hope that it will be useful
-- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- *     GNU General Public License for more details.
-- *
-- * Or, alternatively
-- *
-- *  b) Permission is hereby granted, free of charge, to any person
-- *     obtaining a copy of this software and associated documentation
-- *     files (the "Software"), to deal in the Software without
-- *     restriction, including without limitation the rights to use
-- *     copy, modify, merge, publish, distribute, sublicense, and/or
-- *     sell copies of the Software, and to permit persons to whom the
-- *     Software is furnished to do so, subject to the following
-- *     conditions:
-- *
-- *     The above copyright notice and this permission notice shall be
-- *     included in all copies or substantial portions of the Software.
-- *
-- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-- *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/*
-+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
-  */
- 
- /dts-v1/;
- 
--#include "armada-372x.dtsi"
-+#include "armada-3720-espressobin.dtsi"
- 
- / {
- 	model = "Globalscale Marvell ESPRESSOBin Board";
- 	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
--
--	chosen {
--		stdout-path = "serial0:115200n8";
--	};
--
--	aliases {
--		ethernet0 = &eth0;
--		i2c0 = &i2c0;
--		spi0 = &spi0;
--	};
--
--	memory {
--		device_type = "memory";
--		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
--	};
--
--	vcc_sd_reg0: regulator@0 {
--		compatible = "regulator-gpio";
--		regulator-name = "vcc_sd0";
--		regulator-min-microvolt = <1800000>;
--		regulator-max-microvolt = <3300000>;
--		regulator-type = "voltage";
--		states = <1800000 0x1
--			  3300000 0x0>;
--		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
--	};
--};
--
--&comphy {
--	max-lanes = <3>;
--	phy0 {
--		phy-type = <PHY_TYPE_USB3_HOST0>;
--		phy-speed = <PHY_SPEED_5G>;
--	};
--
--	phy1 {
--		phy-type = <PHY_TYPE_PEX0>;
--		phy-speed = <PHY_SPEED_2_5G>;
--	};
--
--	phy2 {
--		phy-type = <PHY_TYPE_SATA0>;
--		phy-speed = <PHY_SPEED_5G>;
--	};
--};
--
--&eth0 {
--	status = "okay";
--	pinctrl-names = "default";
--	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
--	phy-mode = "rgmii";
--	phy_addr = <0x1>;
--	fixed-link {
--		speed = <1000>;
--		full-duplex;
--	};
--};
--
--&i2c0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&i2c1_pins>;
--	status = "okay";
--};
--
--/* CON3 */
--&sata {
--	status = "okay";
--};
--
--&sdhci0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&sdio_pins>;
--	bus-width = <4>;
--	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
--	vqmmc-supply = <&vcc_sd_reg0>;
--	status = "okay";
--};
--
--&spi0 {
--	status = "okay";
--	pinctrl-names = "default";
--	pinctrl-0 = <&spi_quad_pins>;
--
--	spi-flash@0 {
--		#address-cells = <1>;
--		#size-cells = <1>;
--		compatible = "st,m25p128", "jedec,spi-nor";
--		reg = <0>; /* Chip select 0 */
--		spi-max-frequency = <50000000>;
--		m25p,fast-read;
--	};
--};
--
--/* Exported on the micro USB connector CON32 through an FTDI */
--&uart0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&uart1_pins>;
--	status = "okay";
--};
--
--/* CON29 */
--&usb2 {
--	status = "okay";
--};
--
--/* CON31 */
--&usb3 {
--	status = "okay";
--};
--
--&pcie0 {
--	pinctrl-names = "default";
--	pinctrl-0 = <&pcie_pins>;
--	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--	status = "okay";
- };
---- /dev/null
-+++ b/arch/arm/dts/armada-3720-espressobin.dtsi
-@@ -0,0 +1,167 @@
-+/*
-+ * Device Tree file for Marvell Armada 3720 community board
-+ * (ESPRESSOBin)
-+ * Copyright (C) 2016 Marvell
-+ *
-+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
-+ * Konstantin Porotchkin <kostap@marvell.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "armada-372x.dtsi"
-+
-+/ {
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	aliases {
-+		ethernet0 = &eth0;
-+		i2c0 = &i2c0;
-+		spi0 = &spi0;
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-+	};
-+
-+	vcc_sd_reg0: regulator@0 {
-+		compatible = "regulator-gpio";
-+		regulator-name = "vcc_sd0";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-type = "voltage";
-+		states = <1800000 0x1
-+			  3300000 0x0>;
-+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&comphy {
-+	max-lanes = <3>;
-+	phy0 {
-+		phy-type = <PHY_TYPE_USB3_HOST0>;
-+		phy-speed = <PHY_SPEED_5G>;
-+	};
-+
-+	phy1 {
-+		phy-type = <PHY_TYPE_PEX0>;
-+		phy-speed = <PHY_SPEED_2_5G>;
-+	};
-+
-+	phy2 {
-+		phy-type = <PHY_TYPE_SATA0>;
-+		phy-speed = <PHY_SPEED_5G>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
-+	phy-mode = "rgmii";
-+	phy_addr = <0x1>;
-+	fixed-link {
-+		speed = <1000>;
-+		full-duplex;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	status = "okay";
-+};
-+
-+/* CON3 */
-+&sata {
-+	status = "okay";
-+};
-+
-+&sdhci0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdio_pins>;
-+	bus-width = <4>;
-+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
-+	vqmmc-supply = <&vcc_sd_reg0>;
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi_quad_pins>;
-+
-+	spi-flash@0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "st,m25p128", "jedec,spi-nor";
-+		reg = <0>; /* Chip select 0 */
-+		spi-max-frequency = <50000000>;
-+		m25p,fast-read;
-+	};
-+};
-+
-+/* Exported on the micro USB connector CON32 through an FTDI */
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>;
-+	status = "okay";
-+};
-+
-+/* CON29 */
-+&usb2 {
-+	status = "okay";
-+};
-+
-+/* CON31 */
-+&usb3 {
-+	status = "okay";
-+};
-+
-+&pcie0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pcie_pins>;
-+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-+	status = "okay";
-+};
diff --git a/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch b/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch
deleted file mode 100644
index 1e2944b5a2..0000000000
--- a/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 408bba2fb84ad0b02c3f9529065126b40899e256 Mon Sep 17 00:00:00 2001
-From: Andre Heider <a.heider@gmail.com>
-Date: Fri, 4 Sep 2020 15:44:41 +0200
-Subject: [PATCH] arm64: dts: a3720: add support for espressobin with
- populated emmc
-
-Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for
-emmc, since our dtsi is still based on downstream and sdhc0 is used for
-the sd card.
-
-Signed-off-by: Andre Heider <a.heider@gmail.com>
----
- arch/arm/dts/Makefile                         |  1 +
- arch/arm/dts/armada-3720-espressobin-emmc.dts | 44 +++++++++++++++++++
- doc/README.marvell                            |  7 ++-
- 3 files changed, 50 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harm
- dtb-$(CONFIG_ARCH_MVEBU) +=			\
- 	armada-3720-db.dtb			\
- 	armada-3720-espressobin.dtb		\
-+	armada-3720-espressobin-emmc.dtb	\
- 	armada-3720-turris-mox.dtb		\
- 	armada-3720-uDPU.dtb			\
- 	armada-375-db.dtb			\
---- /dev/null
-+++ b/arch/arm/dts/armada-3720-espressobin-emmc.dts
-@@ -0,0 +1,44 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
-+ * Copyright (C) 2018 Marvell
-+ *
-+ * Romain Perier <romain.perier@free-electrons.com>
-+ * Konstantin Porotchkin <kostap@marvell.com>
-+ *
-+ */
-+/*
-+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
-+ */
-+
-+/dts-v1/;
-+
-+#include "armada-3720-espressobin.dtsi"
-+
-+/ {
-+	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
-+	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-+		     "marvell,armada3720", "marvell,armada3710";
-+};
-+
-+/* U11 */
-+&sdhci1 {
-+	non-removable;
-+	bus-width = <8>;
-+	mmc-ddr-1_8v;
-+	mmc-hs400-1_8v;
-+	marvell,xenon-emmc;
-+	marvell,xenon-tun-count = <9>;
-+	marvell,pad-type = "fixed-1-8v";
-+
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc_pins>;
-+	status = "okay";
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	mmccard: mmccard@0 {
-+		compatible = "mmc-card";
-+		reg = <0>;
-+	};
-+};
---- a/doc/README.marvell
-+++ b/doc/README.marvell
-@@ -43,8 +43,11 @@ Build Procedure
-         In order to prevent this, the required device-tree MUST be set during compilation.
-         All device-tree files are located in ./arch/arm/dts/ folder.
- 
--	For other DB boards (MacchiatoBin, EspressoBin and 3700 DB board) compile u-boot with
--	just default device-tree from defconfig using:
-+	For the EspressoBin board with populated eMMC device use
-+		# make DEVICE_TREE=armada-3720-espressobin-emmc
-+
-+	For other DB boards (MacchiatoBin, EspressoBin without soldered eMMC and 3700 DB board)
-+	compile u-boot with just default device-tree from defconfig using:
- 
- 		# make
-