layerscape: add 64b/32b target for ls1012ardb device

The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 60 insertions, 0 deletions

diff --git a/package/boot/uboot-layerscape/patches/0037-driver-spi-remove-Warning-prints-for-Spansion-FS-S-f.patch b/package/boot/uboot-layerscape/patches/0037-driver-spi-remove-Warning-prints-for-Spansion-FS-S-f.patch
new file mode 100644
index 0000000000..981182b125
--- /dev/null
+++ b/package/boot/uboot-layerscape/patches/0037-driver-spi-remove-Warning-prints-for-Spansion-FS-S-f.patch
@@ -0,0 +1,60 @@
+From 65a6669afc667dacacf24a3a3f340205e38b0c5d Mon Sep 17 00:00:00 2001
+From: Yunhui Cui <yunhui.cui@nxp.com>
+Date: Fri, 27 May 2016 10:25:09 +0800
+Subject: [PATCH 37/93] driver: spi: remove Warning prints for Spansion FS-S
+ fmaily
+
+The Spansion flash FS-S family don't support the bank related
+commands, Even if flash size exceed 16MB, we cannot enable the
+macro CONFIG_SPI_FLASH_BAR. Also, we need remove the irrelevant
+warnings:
+"puts("SF: Warning - Only lower 16MiB accessible,"
+"Full access #define CONFIG_SPI_FLASH_BAR"
+
+Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
+---
+ drivers/mtd/spi/spi_flash.c |   13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
+index e9d1c64..b0f09ab 100644
+--- a/drivers/mtd/spi/spi_flash.c
++++ b/drivers/mtd/spi/spi_flash.c
+@@ -1009,6 +1009,9 @@ int spi_flash_scan(struct spi_flash *flash)
+ 	u8 idcode[5];
+ 	u8 cmd;
+ 	int ret;
++#ifdef CONFIG_SPI_FLASH_SPANSION
++	u8 id[6];
++#endif
+ 
+ 	/* Read the ID codes */
+ 	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+@@ -1062,7 +1065,6 @@ int spi_flash_scan(struct spi_flash *flash)
+ 	if ((jedec == 0x0219 || (jedec == 0x0220)) &&
+ 	    (ext_jedec & 0xff00) == 0x4d00) {
+ 		int ret;
+-		u8 id[6];
+ 
+ 		/* Read the ID codes again, 6 bytes */
+ 		ret = spi_flash_cmd(flash->spi, CMD_READ_ID, id, sizeof(id));
+@@ -1253,10 +1255,13 @@ int spi_flash_scan(struct spi_flash *flash)
+ #endif
+ 
+ #ifndef CONFIG_SPI_FLASH_BAR
+-	if (((flash->dual_flash == SF_SINGLE_FLASH) &&
+-	     (flash->size > SPI_FLASH_16MB_BOUN)) ||
++	if ((id[5] != 0x81) &&
++	/*Spansion FS-S family not support BAR ,
++	Even if CONFIG_SPI_FLASH_BAR is unable,  Need not the Warning prints */
++	     ((((flash->dual_flash == SF_SINGLE_FLASH) &&
++	     (flash->size > SPI_FLASH_16MB_BOUN))) ||
+ 	     ((flash->dual_flash > SF_SINGLE_FLASH) &&
+-	     (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
++	     (flash->size > SPI_FLASH_16MB_BOUN << 1)))) {
+ 		puts("SF: Warning - Only lower 16MiB accessible,");
+ 		puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+ 	}
+-- 
+1.7.9.5
+