aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-lantiq
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2016-05-20 23:45:59 +0200
committerMathias Kresin <dev@kresin.me>2016-11-29 21:40:16 +0100
commit36148d923b72688f825f3c2c540942c91039f7d2 (patch)
tree0944a1b31e78afb1ef61c1fec94bbdb0071442fc /package/boot/uboot-lantiq
parent0e34459e6b4d7b3753b27cf97f304f86e80155ca (diff)
downloadupstream-36148d923b72688f825f3c2c540942c91039f7d2.tar.gz
upstream-36148d923b72688f825f3c2c540942c91039f7d2.tar.bz2
upstream-36148d923b72688f825f3c2c540942c91039f7d2.zip
uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl. Use the ddr_settings.h from the GPL tarball. The NAND boot optimized one (with memory tuning enabled) doesn't work for the UART boot image. Use the same mtd layout as the stock u-boot. Add add UBI support. Use the leds to indicate boot status like it is done with the stock u-boot. Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Make only the ramboot u-boot available. Only this image is required for the first installation of LEDE. Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'package/boot/uboot-lantiq')
-rw-r--r--package/boot/uboot-lantiq/Makefile8
-rw-r--r--package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch344
2 files changed, 352 insertions, 0 deletions
diff --git a/package/boot/uboot-lantiq/Makefile b/package/boot/uboot-lantiq/Makefile
index 43f481fc2f..e34ba79140 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makefile
@@ -214,6 +214,13 @@ define uboot/acmp252_nor
DEPS:=@TARGET_lantiq_xway
endef
+define uboot/bthomehubv5a_ram
+ TITLE:=U-Boot for BT Home Hub 5A (RAM)
+ SOC:=vr9
+ DDR_SETTINGS:=board/bt/bthomehubv5a/ddr_settings.h
+ DEPS:=@TARGET_lantiq_xrx200
+endef
+
define uboot/easy50712_ram
TITLE:=U-Boot for Lantiq EASY50712 (RAM)
SOC:=danube
@@ -342,6 +349,7 @@ UBOOTS:= \
arv752dpw_ram arv752dpw_nor arv752dpw_brn \
arv752dpw22_ram arv752dpw22_nor arv752dpw22_brn \
arv8539pw22_brn arv8539pw22_nor arv8539pw22_ram \
+ bthomehubv5a_ram \
gigasx76x_ram gigasx76x_nor \
acmp252_ram acmp252_nor \
easy50712_ram easy50712_nor easy50712_norspl \
diff --git a/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch b/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch
new file mode 100644
index 0000000000..fd709bc2ac
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0116-MIPS-add-board-support-for-BT-Home-Hub-5A.patch
@@ -0,0 +1,344 @@
+--- /dev/null
++++ b/board/bt/bthomehubv5a/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/bt/bthomehubv5a/bthomehubv5a.c
+@@ -0,0 +1,125 @@
++/*
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++ * Based on p2812hnufx.c: (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++#define GPIO_POWER_GREEN 14
++#define GPIO_POWER_RED 12
++
++static void gpio_init(void)
++{
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++
++ /* Turn on the green power LED */
++ gpio_direction_output(GPIO_POWER_GREEN, 0);
++
++ /* Turn off the red power LED */
++ gpio_direction_output(GPIO_POWER_RED, 1);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++void show_boot_progress(int arg)
++{
++ if (!do_gpio_init)
++ return 0;
++
++ if (arg >= 0) {
++ /* Success - turn off the red power LED and turn on the green power LED */
++ gpio_set_value(GPIO_POWER_RED, 1);
++ gpio_set_value(GPIO_POWER_GREEN, 0);
++ } else {
++ /* Failure - turn off green power LED and turn on red power LED */
++ gpio_set_value(GPIO_POWER_GREEN, 1);
++ gpio_set_value(GPIO_POWER_RED, 0);
++ }
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 3 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 4 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 1 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FE0000;
++
++ ltq_gphy_phy11g_a2x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(&eth_board_config);
++}
+--- /dev/null
++++ b/board/bt/bthomehubv5a/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/bt/bthomehubv5a/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++ *
++ * The values have been taken from the HH5A GPL source.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000101
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000401
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141b42
++#define MC_CCR42_VALUE 0x141b42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -546,6 +546,8 @@ Active mips mips32 vrx20
+ Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 bt bthomehubv5a bthomehubv5a_nandspl bthomehubv5a:SYS_BOOT_NANDSPL Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++Active mips mips32 vrx200 bt bthomehubv5a bthomehubv5a_ram bthomehubv5a:SYS_BOOT_RAM Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+--- /dev/null
++++ b/include/configs/bthomehubv5a.h
+@@ -0,0 +1,89 @@
++/*
++ * Copyright (C) 2016 Mathias Kresin <openwrt@kresin.me>
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++ * Based on p2812hnufx.h: (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "BTHOMEHUBV5A"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "BT Home Hub 5A"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a ML01G100BHI00 NAND flash */
++#define CONFIG_SYS_NAND_USE_FLASH_BBT
++
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_SYS_NAND_PAGE_COUNT 64
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
++#define CONFIG_SYS_NAND_5_ADDR_CYCLE
++
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++#define CONFIG_LTQ_SPL_MC_TUNE
++
++#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16 MB */
++
++/* MTD devices */
++#define CONFIG_MTD_PARTITIONS
++#define CONFIG_MTD_DEVICE
++#define CONFIG_CMD_MTDPARTS
++#define MTDIDS_DEFAULT "nand0=nand-xway"
++#define MTDPARTS_DEFAULT "mtdparts=nand-xway:0x07e80000@0x100000(UBI)"
++
++/* UBI */
++#define CONFIG_RBTREE
++#define CONFIG_CMD_UBI
++#define CONFIG_CMD_UBIFS
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_SPL_TPL_OFFS 0x800
++#define CONFIG_SPL_TPL_SIZE 0x5000
++#define CONFIG_SPL_MC_TUNE_OFFS 0x5800
++#define CONFIG_SPL_U_BOOT_OFFS 0x6000
++#define CONFIG_SPL_U_BOOT_SIZE 0x3a000
++
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (640 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (128 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#undef CONFIG_BOOTCOMMAND
++#define CONFIG_BOOTCOMMAND \
++ "mtdparts default; ubi part UBI; ubi read ${loadaddr} kernel; bootm ${loadaddr}"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS
++
++#endif /* __CONFIG_H */