diff options
| author | David Bauer <mail@david-bauer.net> | 2019-03-11 18:05:32 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-03-13 16:25:35 +0100 |
| commit | 148d29d47b1d555d0058dcc5dda450b74c4628ec (patch) | |
| tree | 2776b656d5499965af22127edb8348ca7438fae7 /package/boot/uboot-fritz4040 | |
| parent | 5389db72e3265198986dfb50a831fb8f8264d346 (diff) | |
| download | upstream-148d29d47b1d555d0058dcc5dda450b74c4628ec.tar.gz upstream-148d29d47b1d555d0058dcc5dda450b74c4628ec.tar.bz2 upstream-148d29d47b1d555d0058dcc5dda450b74c4628ec.zip | |
ipq40xx: add support for AVM FRITZ!Repeater 3000
Hardware
--------
CPU: Qualcomm IPQ4019
RAM: 256M (NANYA NT5CC128M16JR-EK)
FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI)
ETH: Qualcomm QCA8072
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
WiFi5: QCA9984 4T4R 4SS n/ac
LED: - Connect green/blue/red
- Power green
BTN: WPS/Connect
UART: 115200n8 3.3V
VCC - RX - TX - GND (Square is VCC)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz3000'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ3000.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz3000.bin uboot0
> mtd write /path/to/uboot-fritz3000.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/boot/uboot-fritz4040')
| -rw-r--r-- | package/boot/uboot-fritz4040/Makefile | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/package/boot/uboot-fritz4040/Makefile b/package/boot/uboot-fritz4040/Makefile index 3182842c89..015ca1deb9 100644 --- a/package/boot/uboot-fritz4040/Makefile +++ b/package/boot/uboot-fritz4040/Makefile @@ -25,6 +25,11 @@ define U-Boot/Default UBOOT_IMAGE:=uboot-$(1).bin endef +define U-Boot/fritz3000 + NAME:=FritzRepeater 3000 + BUILD_DEVICES:=avm_fritzrepeater-3000 +endef + define U-Boot/fritz4040 NAME:=FritzBox 4040 BUILD_DEVICES:=avm_fritzbox-4040 @@ -61,6 +66,6 @@ define Package/u-boot/install $(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/ endef -UBOOT_TARGETS := fritz4040 fritz7530 +UBOOT_TARGETS := fritz3000 fritz4040 fritz7530 $(eval $(call BuildPackage/U-Boot)) |