aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-envtools
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2020-01-12 21:36:23 +0900
committerPetr Štetiar <ynezz@true.cz>2020-07-08 23:22:30 +0200
commit358aec77756d6bf850a533272f2685a45220dc0c (patch)
tree6d28b534f25267ab28af866abb92ec92b057f3a9 /package/boot/uboot-envtools
parentdc61e3b7ffdc2e3873af238a9100d44ee685578c (diff)
downloadupstream-358aec77756d6bf850a533272f2685a45220dc0c.tar.gz
upstream-358aec77756d6bf850a533272f2685a45220dc0c.tar.bz2
upstream-358aec77756d6bf850a533272f2685a45220dc0c.zip
ath79: add support for Arduino Yun
Arduino Yun is a microcontroller development board, based on Atmel ATmega32u4 and Atheros AR9331. Specifications: - MCU: ATmega32U4 - SoC: AR9331 - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - Ethernet: 1x 10/100Mbps - USB: 1x 2.0 - MicroSD: 1x SDHC Notes: - Stock firmware is based on OpenWrt AA. - The SoC UART can be accessed only through the MCU. YunSerialTerminal is recommended for access to serial console. - Stock firmware uses non-standard 250000 baudrate by default. - The MCU can be reprogrammed from the SoC with avrdude linuxgpio. Installation: 1. Update U-Boot environment variables to adapt to new partition scheme. > setenv bootcmd "run addboard; run addtty; run addparts; run addrootfs; bootm 0x9f050000 || bootm 0x9fea0000" > setenv mtdparts "spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro" > saveenv 2. Boot into stock firmware normally and perform sysupgrade with sysupgrade image. # sysupgrade -n -F /tmp/sysupgrade.bin Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'package/boot/uboot-envtools')
-rw-r--r--package/boot/uboot-envtools/files/ath791
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 3754b521a4..5f5a448861 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -14,6 +14,7 @@ board=$(board_name)
case "$board" in
alfa-network,ap121f|\
+arduino,yun|\
buffalo,bhr-4grv2|\
devolo,magic-2-wifi|\
engenius,ecb1750|\