aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-envtools
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-08-08 22:13:44 +0200
committerMathias Kresin <dev@kresin.me>2018-08-09 18:44:57 +0200
commitc4931713df8ffb3c4e5c1be7d0b6d4aa96a7dd4c (patch)
treec714a77976744b2c4dd86013962680f1e064478e /package/boot/uboot-envtools
parent387736af41444945da6a5e51748e91011569c03e (diff)
downloadupstream-c4931713df8ffb3c4e5c1be7d0b6d4aa96a7dd4c.tar.gz
upstream-c4931713df8ffb3c4e5c1be7d0b6d4aa96a7dd4c.tar.bz2
upstream-c4931713df8ffb3c4e5c1be7d0b6d4aa96a7dd4c.zip
ath79: add support for OCEDO Koala
This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/boot/uboot-envtools')
-rw-r--r--package/boot/uboot-envtools/files/ath791
1 files changed, 1 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 4d9d2e8fe0..aa0bf4514f 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -14,6 +14,7 @@ board=$(board_name)
case "$board" in
glinet,ar300m|\
+ocedo,koala|\
ocedo,raccoon|\
openmesh,om5p-ac-v2)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"