diff options
| author | Mikhail Zhilkin <csharper2005@gmail.com> | 2022-03-18 18:09:45 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-08-13 20:52:37 +0200 |
| commit | 85b41cbd3b8e98393232b5f619dcc7378652fbd8 (patch) | |
| tree | 932daf0a672a1edad1cdd970995cfb19a1de0623 /package/boot/uboot-envtools/files | |
| parent | 6d5873a162e9e03c93012a26b0004d46e6764a8e (diff) | |
| download | upstream-85b41cbd3b8e98393232b5f619dcc7378652fbd8.tar.gz upstream-85b41cbd3b8e98393232b5f619dcc7378652fbd8.tar.bz2 upstream-85b41cbd3b8e98393232b5f619dcc7378652fbd8.zip | |
ramips: add support for Beeline SmartBox TURBO
Beeline SmartBox TURBO is a wireless WiFi 5 router manufactured by
Sercomm company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 256 MiB, Micron MT29F2G08ABAGA3W
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5xGbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: 1xUSB3.0
Button: 2 buttons (Reset & WPS)
LEDs: 1 RGB LED
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Login to the router web interface (admin:admin)
2. Navigate to Settings -> WAN -> Add static IP interface (e.g.
10.0.0.1/255.255.255.0)
3. Navigate to Settings -> Remote cotrol -> Add SSH, port 22,
10.0.0.0/255.255.255.0 and interface created before
4. Change IP of your client to 10.0.0.2/255.255.255.0 and connect the
ethernet cable to the WAN port of the router
5. Connect to the router using SSH shell (SuperUser:SNxxxxxxxxxx, where
SNxxxxxxxxxx is the serial number from the backplate label)
6. Run in SSH shell:
sh
7. Make a mtd backup (optional, see related section)
8. Change bootflag to Sercomm1 and reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
reboot
9. Login to the router web interface (admin:admin)
10. Remove dots from the OpenWrt factory image filename
11. Update firmware via web using OpenWrt factory image
Revert to stock
---------------
1. Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
2. Optional: Update with any stock (Beeline) firmware if you want to
overwrite OpenWrt in Slot 0 completely.
mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
cd /tmp
for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
tftp -l mtd.md5 -p 10.0.0.2
MAC Addresses
-------------
+-----+-----------+---------+
| use | address | example |
+-----+-----------+---------+
| LAN | label | *:54 |
| WAN | label + 1 | *:55 |
| 2g | label + 4 | *:58 |
| 5g | label + 5 | *:59 |
+-----+-----------+---------+
The label MAC address was found in Factory 0x21000
Co-developed-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Diffstat (limited to 'package/boot/uboot-envtools/files')
| -rw-r--r-- | package/boot/uboot-envtools/files/ramips | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index f7f4821cef..597baef6cd 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -31,7 +31,8 @@ ampedwireless,ally-00x19k|\ ampedwireless,ally-r1900k) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4" ;; -beeline,smartbox-giga) +beeline,smartbox-giga|\ +beeline,smartbox-turbo) ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000" ;; buffalo,wsr-1166dhp|\ |