aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-envtools/files/ath79
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2020-03-21 23:20:31 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2020-09-28 01:28:37 +0200
commit66abd58196a8e1195f1e2cd9871b4fc194b6570b (patch)
treed0959571e260cfdd3083fd4f8d1ba132379d270a /package/boot/uboot-envtools/files/ath79
parent7f96cbd2a11a382a940ecdfc75d45bad44283414 (diff)
downloadupstream-66abd58196a8e1195f1e2cd9871b4fc194b6570b.tar.gz
upstream-66abd58196a8e1195f1e2cd9871b4fc194b6570b.tar.bz2
upstream-66abd58196a8e1195f1e2cd9871b4fc194b6570b.zip
ath79: add support for ALFA Network AP121FE
The AP121FE is a slightly modified version of already supported AP121F model (added to ar71xx in 0c6165d21a and to ath79 in 334bbc5198). The differences in compare to AP121F: - no micro SD card reader - USB data lines are included in Type-A plug - USB bus switched to device/peripheral mode (permanently, in bootstrap) Other than that, specifications are the same: - Atheros AR9331 - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of flash (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz Wi-Fi, up to 15 dBm - 1x IPEX/U.FL connector, internal PCB antenna - 3x LED, 1x button, 1x switch - 4-pin UART header on PCB (2 mm pitch) - USB 2.0 Type-A plug (power and data) Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'package/boot/uboot-envtools/files/ath79')
0 files changed, 0 insertions, 0 deletions