aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-07-06 18:23:31 +0200
committerMathias Kresin <dev@kresin.me>2018-07-08 00:04:27 +0200
commit647614803473757e3b2d93d46938afccd61a5a5d (patch)
treeebb7ca8fe8cfd78e4dc9a704df9e9e30e61aa4c3 /package/base-files
parentda6c09eff4d353f3c64e815fb3a556261111f0ca (diff)
downloadupstream-647614803473757e3b2d93d46938afccd61a5a5d.tar.gz
upstream-647614803473757e3b2d93d46938afccd61a5a5d.tar.bz2
upstream-647614803473757e3b2d93d46938afccd61a5a5d.zip
ath79: add support for OCEDO Raccoon
This commit adds support for the OCEDO Raccoon SOC: Atheros AR9344 RAM: 128MB FLASH: 16MiB WLAN1: AR9344 2.4 GHz 802.11bgn 2x2 WLAN2: AR9382 5 GHz 802.11an 2x2 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5 Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. NOTE: The U-Boot won't boot with the serial attached. Boot the device without serial attached and attach it after 3 seconds. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'raccoon-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/base-files')
0 files changed, 0 insertions, 0 deletions