diff options
author | David Bauer <mail@david-bauer.net> | 2018-07-06 18:23:31 +0200 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-07-08 00:04:27 +0200 |
commit | 647614803473757e3b2d93d46938afccd61a5a5d (patch) | |
tree | ebb7ca8fe8cfd78e4dc9a704df9e9e30e61aa4c3 /package/base-files/files/bin | |
parent | da6c09eff4d353f3c64e815fb3a556261111f0ca (diff) | |
download | upstream-647614803473757e3b2d93d46938afccd61a5a5d.tar.gz upstream-647614803473757e3b2d93d46938afccd61a5a5d.tar.bz2 upstream-647614803473757e3b2d93d46938afccd61a5a5d.zip |
ath79: add support for OCEDO Raccoon
This commit adds support for the OCEDO Raccoon
SOC: Atheros AR9344
RAM: 128MB
FLASH: 16MiB
WLAN1: AR9344 2.4 GHz 802.11bgn 2x2
WLAN2: AR9382 5 GHz 802.11an 2x2
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
NOTE: The U-Boot won't boot with the serial attached.
Boot the device without serial attached and attach it
after 3 seconds.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'raccoon-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/base-files/files/bin')
0 files changed, 0 insertions, 0 deletions