update the acx driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10178 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 0 insertions, 733 deletions

diff --git a/package/acx-mac80211/patches/002-acx_vlynq.diff b/package/acx-mac80211/patches/002-acx_vlynq.diff
deleted file mode 100644
index c488678304..0000000000
--- a/package/acx-mac80211/patches/002-acx_vlynq.diff
+++ /dev/null
@@ -1,555 +0,0 @@
-diff -Nru 1/acx_struct.h 2/acx_struct.h
---- 1/acx_struct.h	2007-10-03 23:42:39.000000000 +0800
-+++ 2/acx_struct.h	2007-10-06 01:15:32.000000000 +0800
-@@ -1425,7 +1425,13 @@
- 
- 	const u16	*io;		/* points to ACX100 or ACX111 PCI I/O register address set */
- 
-+#ifdef CONFIG_PCI
- 	struct pci_dev	*pdev;
-+#endif
-+#ifdef CONFIG_VLYNQ
-+	struct vlynq_device	*vdev;
-+#endif
-+	struct device *bus_dev;
- 
- 	unsigned long	membase;
- 	unsigned long	membase2;
-diff -Nru 1/pci.c 2/pci.c
---- 1/pci.c	2007-10-03 23:42:39.000000000 +0800
-+++ 2/pci.c	2007-10-06 01:15:32.000000000 +0800
-@@ -33,11 +33,15 @@
- #include <linux/ethtool.h>
- #include <linux/dma-mapping.h>
- #include <linux/workqueue.h>
-+#ifdef CONFIG_VLYNQ
-+#include <linux/vlynq.h>
-+#endif
- 
- #include "acx.h"
- 
- /***********************************************************************
- */
-+#ifdef CONFIG_PCI
- #define PCI_TYPE		(PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE)
- #define PCI_ACX100_REGION1		0x01
- #define PCI_ACX100_REGION1_SIZE		0x1000	/* Memory size - 4K bytes */
-@@ -74,7 +78,7 @@
- #define PCI_UNKNOWN	5
- #define PCI_POWER_ERROR	-1
- #endif
--
-+#endif /* CONFIG_PCI */
- /***********************************************************************
- */
- 
-@@ -87,12 +91,6 @@
- static void acxpci_s_up(struct ieee80211_hw *hw);
- static void acxpci_s_down(struct ieee80211_hw *hw);
- 
--void acxpci_put_devname(acx_device_t *adev, struct ethtool_drvinfo *info)
--{
--
--        strncpy(info->bus_info,pci_name(adev->pdev), ETHTOOL_BUSINFO_LEN);
--}
--
- /***********************************************************************
- ** Register access
- **
-@@ -605,12 +603,12 @@
- 	snprintf(filename, sizeof(filename), "tiacx1%02dc%02X",
- 		 IS_ACX111(adev) * 11, adev->radio_type);
- 
--	fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+	fw_image = acx_s_read_fw(adev->bus_dev, filename, &file_size);
- 	if (!fw_image) {
- 		adev->need_radio_fw = 1;
- 		filename[sizeof("tiacx1NN") - 1] = '\0';
- 		fw_image =
--		    acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
-+		    acx_s_read_fw(adev->bus_dev, filename, &file_size);
- 		if (!fw_image) {
- 			FN_EXIT1(NOT_OK);
- 			return NOT_OK;
-@@ -670,7 +668,7 @@
- 
- 	snprintf(filename, sizeof(filename), "tiacx1%02dr%02X",
- 		 IS_ACX111(adev) * 11, adev->radio_type);
--	radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size);
-+	radio_image = acx_s_read_fw(adev->bus_dev, filename, &size);
- 	if (!radio_image) {
- 		printk("acx: can't load radio module '%s'\n", filename);
- 		goto fail;
-@@ -886,7 +884,9 @@
- 
- 	acx_lock(adev, flags);
- 
-+#ifdef CONFIG_PCI
- 	acxpci_l_reset_mac(adev);
-+#endif
- 
- 	ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1;
- 	if (!ecpu_ctrl) {
-@@ -1426,6 +1426,7 @@
- };
- 
- 
-+#ifdef CONFIG_PCI
- static int __devinit
- acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
- {
-@@ -1477,6 +1478,7 @@
- 	/* acx_sem_lock(adev); */
- 	adev->ieee = ieee;
- 	adev->pdev = pdev;
-+	adev->bus_dev = &pdev->dev;
- 	adev->dev_type = DEVTYPE_PCI;
- 
- /** Finished with private interface **/
-@@ -1916,7 +1918,7 @@
- 	return OK;
- }
- #endif /* CONFIG_PM */
--
-+#endif /* CONFIG_PCI */
- 
- /***********************************************************************
- ** acxpci_s_up
-@@ -1998,7 +2000,7 @@
- 	/* then wait until interrupts have finished executing on other CPUs */
- 	acx_lock(adev, flags);
- 	disable_acx_irq(adev);
--        synchronize_irq(adev->pdev->irq);
-+        synchronize_irq(adev->irq);
- 	acx_unlock(adev, flags);
- 
- 	/* we really don't want to have an asynchronous tasklet disturb us
-@@ -3449,8 +3451,7 @@
- {
- 	void *ptr;
- 
--	ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL,
--				 size, phy, GFP_KERNEL);
-+	ptr = dma_alloc_coherent(adev->bus_dev, size, phy, GFP_KERNEL);
- 
- 	if (ptr) {
- 		log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
-@@ -4016,10 +4017,370 @@
- 	return OK;
- }
- 
-+#ifdef CONFIG_VLYNQ
-+struct vlynq_reg_config {
-+	u32 offset;
-+	u32 value;
-+};
-+
-+struct vlynq_known {
-+	u32 chip_id;
-+	char name[32];
-+	struct vlynq_mapping rx_mapping[4];
-+	int irq;
-+	int irq_type;
-+	int num_regs;
-+	struct vlynq_reg_config regs[10];
-+};
-+
-+#define CHIP_TNETW1130 0x00000009
-+#define CHIP_TNETW1350 0x00000029
-+
-+static struct vlynq_known known_devices[] = {
-+	{
-+		.chip_id = CHIP_TNETW1130, .name = "TI TNETW1130",
-+		.rx_mapping = {
-+			{ .size = 0x22000, .offset = 0xf0000000 },
-+			{ .size = 0x40000, .offset = 0xc0000000 },
-+			{ .size = 0x0, .offset = 0x0 },
-+			{ .size = 0x0, .offset = 0x0 },
-+		},
-+		.irq = 0,
-+		.irq_type = IRQ_TYPE_EDGE_RISING,
-+		.num_regs = 5,
-+		.regs = {
-+			{
-+				.offset = 0x790,
-+				.value = (0xd0000000 - PHYS_OFFSET)
-+			},
-+			{
-+				.offset = 0x794,
-+				.value = (0xd0000000 - PHYS_OFFSET)
-+			},
-+			{ .offset = 0x740, .value = 0 },
-+			{ .offset = 0x744, .value = 0x00010000 },
-+			{ .offset = 0x764, .value = 0x00010000 },
-+		},
-+	},
-+	{
-+		.chip_id = CHIP_TNETW1350, .name = "TI TNETW1350",
-+		.rx_mapping = {
-+			{ .size = 0x100000, .offset = 0x00300000 },
-+			{ .size = 0x80000, .offset = 0x00000000 },
-+			{ .size = 0x0, .offset = 0x0 },
-+			{ .size = 0x0, .offset = 0x0 },
-+		},
-+		.irq = 0,
-+		.irq_type = IRQ_TYPE_EDGE_RISING,
-+		.num_regs = 5,
-+		.regs = {
-+			{
-+				.offset = 0x790,
-+				.value = (0x60000000 - PHYS_OFFSET)
-+			},
-+			{
-+				.offset = 0x794,
-+				.value = (0x60000000 - PHYS_OFFSET)
-+			},
-+			{ .offset = 0x740, .value = 0 },
-+			{ .offset = 0x744, .value = 0x00010000 },
-+			{ .offset = 0x764, .value = 0x00010000 },
-+		},
-+	},
-+};
-+
-+static struct vlynq_device_id acx_vlynq_id[] = {
-+	{ CHIP_TNETW1130, vlynq_div_auto, 0 },
-+	{ CHIP_TNETW1350, vlynq_div_auto, 1 },
-+	{ 0, 0, 0 },
-+};
-+
-+static __devinit int vlynq_probe(struct vlynq_device *vdev,
-+				 struct vlynq_device_id *id)
-+{
-+	int result = -EIO, i;
-+	u32 addr;
-+	struct ieee80211_hw *ieee;
-+	acx_device_t *adev = NULL;
-+	acx111_ie_configoption_t co;
-+	struct vlynq_mapping mapping[4] = { { 0, }, };
-+	struct vlynq_known *match = NULL;
-+
-+	FN_ENTER;
-+	result = vlynq_enable_device(vdev);
-+	if (result)
-+		return result;
-+
-+	match = &known_devices[id->driver_data];
-+
-+	if (!match) {
-+		result = -ENODEV;
-+		goto fail;
-+	}
-+
-+	mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
-+	mapping[0].size = 0x02000000;
-+	vlynq_set_local_mapping(vdev, vdev->mem_start, mapping);
-+	vlynq_set_remote_mapping(vdev, 0, match->rx_mapping);
-+
-+	set_irq_type(vlynq_virq_to_irq(vdev, match->irq), match->irq_type);
-+
-+	addr = (u32)ioremap(vdev->mem_start, 0x1000);
-+	if (!addr) {
-+		printk(KERN_ERR "%s: failed to remap io memory\n",
-+		       vdev->dev.bus_id);
-+		result = -ENXIO;
-+		goto fail;
-+	}
-+
-+	for (i = 0; i < match->num_regs; i++)
-+		iowrite32(match->regs[i].value,
-+			  (u32 *)(addr + match->regs[i].offset));
-+
-+	iounmap((void *)addr);
-+
-+	ieee = ieee80211_alloc_hw(sizeof(struct acx_device), &acxpci_hw_ops);
-+	if (!ieee) {
-+		printk("acx: could not allocate ieee80211 structure %s\n",
-+		       vdev->dev.bus_id);
-+		goto fail_alloc_netdev;
-+	}
-+	ieee->flags &=	 (~IEEE80211_HW_RX_INCLUDES_FCS &
-+			  ~IEEE80211_HW_MONITOR_DURING_OPER) |
-+			 IEEE80211_HW_WEP_INCLUDE_IV;
-+	ieee->queues = 1;
-+
-+	adev = ieee2adev(ieee);
-+
-+	memset(adev, 0, sizeof(*adev));
-+	/** Set up our private interface **/
-+	spin_lock_init(&adev->lock);	/* initial state: unlocked */
-+	/* We do not start with downed sem: we want PARANOID_LOCKING to work */
-+	mutex_init(&adev->mutex);
-+	/* since nobody can see new netdev yet, we can as well
-+	 ** just _presume_ that we're under sem (instead of actually taking it): */
-+	/* acx_sem_lock(adev); */
-+	adev->ieee = ieee;
-+	adev->vdev = vdev;
-+	adev->bus_dev = &vdev->dev;
-+	adev->dev_type = DEVTYPE_PCI;
-+
-+/** Finished with private interface **/
-+
-+	vlynq_set_drvdata(vdev, ieee);
-+	if (!request_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start, "acx")) {
-+		printk("acx: cannot reserve VLYNQ memory region\n");
-+		goto fail_request_mem_region;
-+	}
-+	adev->iobase = ioremap(vdev->mem_start, vdev->mem_end - vdev->mem_start);
-+	if (!adev->iobase) {
-+		printk("acx: ioremap() FAILED\n");
-+		goto fail_ioremap;
-+	}
-+	adev->iobase2 = adev->iobase + match->rx_mapping[0].size;
-+	adev->chip_type = CHIPTYPE_ACX111;
-+	adev->chip_name = match->name;
-+	adev->io = IO_ACX111;
-+	adev->irq = vlynq_virq_to_irq(vdev, match->irq);
-+
-+	printk("acx: found %s-based wireless network card at %s, irq:%d, "
-+	       "phymem:0x%x, mem:0x%p\n",
-+	       match->name, vdev->dev.bus_id, adev->irq,
-+	       vdev->mem_start, adev->iobase);
-+	log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
-+
-+	if (0 == adev->irq) {
-+		printk("acx: can't use IRQ 0\n");
-+		goto fail_irq;
-+	}
-+	SET_IEEE80211_DEV(ieee, &vdev->dev);
-+
-+
-+	/* to find crashes due to weird driver access
-+	 * to unconfigured interface (ifup) */
-+	adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
-+
-+
-+	/* ok, pci setup is finished, now start initializing the card */
-+
-+	/* NB: read_reg() reads may return bogus data before reset_dev(),
-+	 * since the firmware which directly controls large parts of the I/O
-+	 * registers isn't initialized yet.
-+	 * acx100 seems to be more affected than acx111 */
-+	if (OK != acxpci_s_reset_dev(adev))
-+		goto fail_reset;
-+
-+	if (OK != acx_s_init_mac(adev))
-+		goto fail_init_mac;
-+
-+	acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
-+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
-+	if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
-+		goto fail_read_eeprom_version;
-+
-+	acx_s_parse_configoption(adev, &co);
-+	acx_s_set_defaults(adev);
-+	acx_s_get_firmware_version(adev);	/* needs to be after acx_s_init_mac() */
-+	acx_display_hardware_details(adev);
-+
-+	/* Register the card, AFTER everything else has been set up,
-+	 * since otherwise an ioctl could step on our feet due to
-+	 * firmware operations happening in parallel or uninitialized data */
-+
-+
-+	acx_proc_register_entries(ieee);
-+
-+	/* Now we have our device, so make sure the kernel doesn't try
-+	 * to send packets even though we're not associated to a network yet */
-+
-+	/* after register_netdev() userspace may start working with dev
-+	 * (in particular, on other CPUs), we only need to up the sem */
-+	/* acx_sem_unlock(adev); */
-+
-+	printk("acx " ACX_RELEASE ": net device %s, driver compiled "
-+	       "against wireless extensions %d and Linux %s\n",
-+	       wiphy_name(adev->ieee->wiphy), WIRELESS_EXT, UTS_RELEASE);
-+
-+	MAC_COPY(adev->ieee->wiphy->perm_addr, adev->dev_addr);
-+
-+	log(L_IRQ | L_INIT, "using IRQ %d\n", adev->irq);
-+
-+/** done with board specific setup **/
-+
-+	acx_init_task_scheduler(adev);
-+	result = ieee80211_register_hw(adev->ieee);
-+	if (OK != result) {
-+		printk("acx: ieee80211_register_hw() FAILED: %d\n", result);
-+		goto fail_register_netdev;
-+	}
-+#if CMD_DISCOVERY
-+	great_inquisitor(adev);
-+#endif
-+
-+	result = OK;
-+	goto done;
-+
-+	/* error paths: undo everything in reverse order... */
-+
-+
-+	acxpci_s_delete_dma_regions(adev);
-+
-+      fail_init_mac:
-+      fail_read_eeprom_version:
-+      fail_reset:
-+
-+      fail_alloc_netdev:
-+      fail_irq:
-+
-+	iounmap(adev->iobase);
-+      fail_ioremap:
-+
-+	release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start);
-+      fail_request_mem_region:
-+      fail_register_netdev:
-+	ieee80211_free_hw(ieee);
-+      fail:
-+	vlynq_disable_device(vdev);
-+      done:
-+	FN_EXIT1(result);
-+	return result;
-+}
-+
-+static void vlynq_remove(struct vlynq_device *vdev)
-+{
-+	struct ieee80211_hw *hw = vlynq_get_drvdata(vdev);
-+	acx_device_t *adev = ieee2adev(hw);
-+	unsigned long flags;
-+	FN_ENTER;
-+
-+	if (!hw) {
-+		log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
-+		    __func__);
-+		goto end;
-+	}
-+
-+
-+	acx_lock(adev, flags);
-+	acx_unlock(adev, flags);
-+	adev->initialized = 0;
-+
-+	/* If device wasn't hot unplugged... */
-+	if (adev_present(adev)) {
-+
-+		acx_sem_lock(adev);
-+
-+		/* disable both Tx and Rx to shut radio down properly */
-+		if (adev->initialized) {
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
-+			acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
-+		}
-+		acx_lock(adev, flags);
-+		/* disable power LED to save power :-) */
-+		log(L_INIT, "switching off power LED to save power\n");
-+		acxpci_l_power_led(adev, 0);
-+		/* stop our eCPU */
-+		acx_unlock(adev, flags);
-+
-+		acx_sem_unlock(adev);
-+	}
-+
-+	/* unregister the device to not let the kernel
-+	 * (e.g. ioctls) access a half-deconfigured device
-+	 * NB: this will cause acxpci_e_close() to be called,
-+	 * thus we shouldn't call it under sem!
-+	 * Well, netdev did, but ieee80211 stack does not, so we
-+	 * have to do so manually...
-+	 */
-+	acxpci_e_close(hw);
-+	log(L_INIT, "removing device %s\n", wiphy_name(adev->ieee->wiphy));
-+	ieee80211_unregister_hw(adev->ieee);
-+
-+	/* unregister_netdev ensures that no references to us left.
-+	 * For paranoid reasons we continue to follow the rules */
-+	acx_sem_lock(adev);
-+
-+	if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
-+		acxpci_s_down(hw);
-+		CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
-+	}
-+
-+	acx_proc_unregister_entries(adev->ieee);
-+
-+	/* finally, clean up PCI bus state */
-+	acxpci_s_delete_dma_regions(adev);
-+	if (adev->iobase)
-+		iounmap(adev->iobase);
-+	if (adev->iobase2)
-+		iounmap(adev->iobase2);
-+	release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start);
-+
-+	/* remove dev registration */
-+
-+	acx_sem_unlock(adev);
-+	vlynq_disable_device(vdev);
-+
-+	/* Free netdev (quite late,
-+	 * since otherwise we might get caught off-guard
-+	 * by a netdev timeout handler execution
-+	 * expecting to see a working dev...) */
-+	ieee80211_free_hw(adev->ieee);
-+
-+      end:
-+	FN_EXIT0;
-+}
-+
-+static struct vlynq_driver vlynq_acx = {
-+	.name = "acx_vlynq",
-+	.id_table = acx_vlynq_id,
-+	.probe = vlynq_probe,
-+	.remove = __devexit_p(vlynq_remove),
-+};
-+#endif
- 
- /***********************************************************************
- ** Data for init_module/cleanup_module
- */
-+#ifdef CONFIG_PCI
- static const struct pci_device_id acxpci_id_tbl[] __devinitdata = {
- 	{
- 	 .vendor = PCI_VENDOR_ID_TI,
-@@ -4071,7 +4432,7 @@
- 	.resume = acxpci_e_resume
- #endif /* CONFIG_PM */
- };
--
-+#endif /* CONFIG_PCI */
- 
- /***********************************************************************
- ** acxpci_e_init_module
-@@ -4080,7 +4441,7 @@
- */
- int __init acxpci_e_init_module(void)
- {
--	int res;
-+	int res = 0;
- 
- 	FN_ENTER;
- 
-@@ -4100,10 +4461,15 @@
- #endif
- 	log(L_INIT,
- 	    "acx: " ENDIANNESS_STRING
--	    "acx: PCI module " ACX_RELEASE " initialized, "
-+	    "acx: PCI/VLYNQ module " ACX_RELEASE " initialized, "
- 	    "waiting for cards to probe...\n");
- 
-+#ifdef CONFIG_PCI
- 	res = pci_register_driver(&acxpci_drv_id);
-+#endif
-+#ifdef CONFIG_VLYNQ
-+	res = vlynq_register_driver(&vlynq_acx);
-+#endif
- 	FN_EXIT1(res);
- 	return res;
- }
-@@ -4119,7 +4485,12 @@
- {
- 	FN_ENTER;
- 
-+#ifdef CONFIG_VLYNQ
-+	vlynq_unregister_driver(&vlynq_acx);
-+#endif
-+#ifdef CONFIG_PCI
- 	pci_unregister_driver(&acxpci_drv_id);
-+#endif
- 
- 	FN_EXIT0;
- }
diff --git a/package/acx-mac80211/patches/003-mac80211_fixes.diff b/package/acx-mac80211/patches/003-mac80211_fixes.diff
deleted file mode 100644
index 62052b352b..0000000000
--- a/package/acx-mac80211/patches/003-mac80211_fixes.diff
+++ /dev/null
@@ -1,178 +0,0 @@
-Index: acx-mac80211-20071003/common.c
-===================================================================
---- acx-mac80211-20071003.orig/common.c	2007-10-15 21:33:40.000000000 +0800
-+++ acx-mac80211-20071003/common.c	2007-10-16 10:01:58.000000000 +0800
-@@ -1683,7 +1683,9 @@
- */
- void
- acx_i_set_multicast_list(struct ieee80211_hw *hw,
--                            unsigned short netflags, int mc_count)
-+                         unsigned int changed_flags,
-+                         unsigned int *total_flags,
-+                         int mc_count, struct dev_addr_list *mc_list)
- {
-         acx_device_t *adev = ieee2adev(hw);
-         unsigned long flags;
-@@ -1692,9 +1694,12 @@
- 
-         acx_lock(adev, flags);
- 
-+        *total_flags &= (FIF_PROMISC_IN_BSS | FIF_ALLMULTI);
-+        if ((changed_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) == 0)
-+                return;
-         /* firmwares don't have allmulti capability,
-          * so just use promiscuous mode instead in this case. */
--        if (netflags & (IFF_PROMISC | IFF_ALLMULTI)) {
-+        if (*total_flags) {
-                 SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS);
-                 CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI);
-                 SET_BIT(adev->set_mask, SET_RXCONFIG);
-@@ -4523,8 +4528,8 @@
- */
- 
- int acx_net_set_key(struct ieee80211_hw *ieee,
--		    set_key_cmd cmd,
--		    u8 * addr, struct ieee80211_key_conf *key, int aid)
-+		    enum set_key_cmd cmd, const u8 *local_addr,
-+		    const u8 * addr, struct ieee80211_key_conf *key)
- {
- //      return 0;
- 	struct acx_device *adev = ieee2adev(ieee);
-@@ -4536,11 +4541,11 @@
- //	TODO();
- 	switch (key->alg) {
- 	default:
--	case ALG_NONE:
-+/*	case ALG_NONE:
- 	case ALG_NULL:
- 		algorithm = ACX_SEC_ALGO_NONE;
- 		break;
--	case ALG_WEP:
-+*/	case ALG_WEP:
- 		if (key->keylen == 5)
- 			algorithm = ACX_SEC_ALGO_WEP;
- 		else
-@@ -4565,20 +4570,21 @@
- 		if (err)
- 			goto out_unlock;
- 		key->hw_key_idx = index;
--		CLEAR_BIT(key->flags, IEEE80211_KEY_FORCE_SW_ENCRYPT);
--		if (CHECK_BIT(key->flags, IEEE80211_KEY_DEFAULT_TX_KEY))
--			adev->default_key_idx = index;
-+/*		CLEAR_BIT(key->flags, IEEE80211_KEY_FORCE_SW_ENCRYPT);*/
-+/*		if (CHECK_BIT(key->flags, IEEE80211_KEY_DEFAULT_TX_KEY))
-+			adev->default_key_idx = index;*/
-+                SET_BIT(key->flags, IEEE80211_KEY_FLAG_GENERATE_IV);
- 		adev->key[index].enabled = 1;
- 		break;
- 	case DISABLE_KEY:
- 		adev->key[index].enabled = 0;
- 		err = 0;
- 		break;
--	case REMOVE_ALL_KEYS:
-+/*	case REMOVE_ALL_KEYS:
- 		acx_clear_keys(adev);
- 		err = 0;
- 		break;
--     /* case ENABLE_COMPRESSION:
-+*/    /* case ENABLE_COMPRESSION:
- 	case DISABLE_COMPRESSION:
- 		err = 0;
- 		break; */
-Index: acx-mac80211-20071003/pci.c
-===================================================================
---- acx-mac80211-20071003.orig/pci.c	2007-10-15 21:33:40.000000000 +0800
-+++ acx-mac80211-20071003/pci.c	2007-10-15 21:34:29.000000000 +0800
-@@ -87,7 +87,7 @@
- static void disable_acx_irq(acx_device_t * adev);
- 
- static int acxpci_e_open(struct ieee80211_hw *hw);
--static int acxpci_e_close(struct ieee80211_hw *hw);
-+static void acxpci_e_close(struct ieee80211_hw *hw);
- static void acxpci_s_up(struct ieee80211_hw *hw);
- static void acxpci_s_down(struct ieee80211_hw *hw);
- 
-@@ -1414,12 +1414,12 @@
-         .conf_tx = acx_net_conf_tx,
-         .add_interface = acx_add_interface,
-         .remove_interface = acx_remove_interface,
--	.open = acxpci_e_open,
-+	.start = acxpci_e_open,
- 	.stop = acxpci_e_close,
--        .reset = acx_net_reset,
-+/*        .reset = acx_net_reset,*/
-         .config = acx_net_config,
-         .config_interface = acx_config_interface,
--        .set_multicast_list = acx_i_set_multicast_list,
-+        .configure_filter = acx_i_set_multicast_list,
-         .set_key = acx_net_set_key,
-         .get_stats = acx_e_get_stats,
-         .get_tx_stats = acx_net_get_tx_stats,
-@@ -1454,9 +1454,7 @@
- 		       pci_name(pdev));
- 		goto fail_alloc_netdev;
- 	}
--	ieee->flags &=	 ~IEEE80211_HW_RX_INCLUDES_FCS &
--			 ~IEEE80211_HW_MONITOR_DURING_OPER |
--			 IEEE80211_HW_WEP_INCLUDE_IV;
-+	ieee->flags &=	 ~IEEE80211_HW_RX_INCLUDES_FCS;
- 	ieee->queues = 1;
- 
- 	/* (NB: memsets to 0 entire area) */
-@@ -2113,7 +2111,7 @@
- **	>0	f/w reported error
- **	<0	driver reported error
- */
--static int acxpci_e_close(struct ieee80211_hw *hw)
-+static void acxpci_e_close(struct ieee80211_hw *hw)
- {
- 	acx_device_t *adev = ieee2adev(hw);
- 	unsigned long flags;
-@@ -2142,7 +2140,6 @@
- 
- 	log(L_INIT, "closed device\n");
- 	FN_EXIT0;
--	return OK;
- }
- 
- 
-@@ -4145,9 +4142,7 @@
- 		       vdev->dev.bus_id);
- 		goto fail_alloc_netdev;
- 	}
--	ieee->flags &=	 (~IEEE80211_HW_RX_INCLUDES_FCS &
--			  ~IEEE80211_HW_MONITOR_DURING_OPER) |
--			 IEEE80211_HW_WEP_INCLUDE_IV;
-+	ieee->flags &=	 ~IEEE80211_HW_RX_INCLUDES_FCS;
- 	ieee->queues = 1;
- 
- 	adev = ieee2adev(ieee);
-Index: acx-mac80211-20071003/acx_func.h
-===================================================================
---- acx-mac80211-20071003.orig/acx_func.h	2007-10-15 21:33:40.000000000 +0800
-+++ acx-mac80211-20071003/acx_func.h	2007-10-15 21:36:01.000000000 +0800
-@@ -610,10 +610,9 @@
- 		struct ieee80211_if_init_conf *conf);
- int acx_net_reset(struct ieee80211_hw* ieee);
- int acx_net_set_key(struct ieee80211_hw *hw, 
--		set_key_cmd cmd,
--		u8 *addr,
--		struct ieee80211_key_conf *key,
--		int aid);
-+		enum set_key_cmd cmd,
-+		const u8 *local_addr, const u8 *addr,
-+		struct ieee80211_key_conf *key);
- int acx_config_interface(struct ieee80211_hw* ieee, int if_id, 
- 		struct ieee80211_if_conf *conf);
- int acx_net_config(struct ieee80211_hw* ieee, struct ieee80211_conf *conf);
-@@ -625,7 +624,9 @@
- int acxpci_s_reset_dev(acx_device_t *adev);
- void acx_e_after_interrupt_task(struct work_struct* work);
- void acx_i_set_multicast_list(struct ieee80211_hw *hw,
--                            unsigned short netflags, int mc_count);
-+                            unsigned int changed_flags,
-+                            unsigned int *total_flags,
-+                            int mc_count, struct dev_addr_list *mc_list);
- 
- /*** End DeviceScape Functions **/
-