aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorBirger Koblitz <git@birger-koblitz.de>2020-09-13 09:06:13 +0200
committerJohn Crispin <john@phrozen.org>2020-09-14 07:54:30 +0200
commitdf8e6be59a1fbce3f8c6878fe7440a129b1245d6 (patch)
treef7dc2da525ff9ef48b5609e96484c759a5b38e6f /include
parent7bb1bd469e98ba4bfd0cf774a82c35039c9b721a (diff)
downloadupstream-df8e6be59a1fbce3f8c6878fe7440a129b1245d6.tar.gz
upstream-df8e6be59a1fbce3f8c6878fe7440a129b1245d6.tar.bz2
upstream-df8e6be59a1fbce3f8c6878fe7440a129b1245d6.zip
rtl838x: add new architecture
This adds support for the RTL838x Architecture. SoCs of this type are used in managed and un-managed Switches and Routers with 8-28 ports. Drivers are provided for SoC initialization, GPIOs, Flash, Ethernet including a DSA switch driver and internal and external PHYs used with these switches. Supported SoCs: RTL8380M RTL8381M RTL8382M The kernel will also boot on the following RTL839x SoCs, however driver support apart from spi-nor is missing: RTL8390 RTL8391 RTL8393 The following PHYs are supported: RTL8214FC (Quad QSGMII multiplexing GMAC and SFP port) RTL8218B internal: internal PHY of the RTL838x chips RTL8318b external (QSGMII 8-port GMAC phy) RTL8382M SerDes for 2 SFP ports Initialization sequences for the PHYs are provided in the form of firmware files. Flash driver supports 3 / 4 byte access DSA switch driver supports VLANs, port isolation, STP and port mirroring. The ALLNET ALL-SG8208M is supported as Proof of Concept: RTL8382M SoC 1 MIPS 4KEc core @ 500MHz 8 Internal PHYs (RTL8218B) 128MB DRAM (Nanya NT5TU128MB) 16MB NOR Flash (MXIC 25L128) 8 GBEthernet ports with one green status LED each (SoC controlled) 1 Power LED (not configurable) 1 SYS LED (configurable) 1 On-Off switch (not configurable) 1 Reset button at the right behind right air-vent (not configurable) 1 Reset button on front panel (configurable) 12V 1A barrel connector 1 serial header with populated standard pin connector and with markings GND TX RX Vcc(3.3V), connection properties: 115200 8N1 To install, upload the sysupgrade image to the OEM webpage. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
Diffstat (limited to 'include')
0 files changed, 0 insertions, 0 deletions