move menuconfig options into separate files

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38895

1 files changed, 0 insertions, 420 deletions

diff --git a/Config-kernel.in b/Config-kernel.in
deleted file mode 100644
index 0e51bdde84..0000000000
--- a/Config-kernel.in
+++ /dev/null
@@ -1,420 +0,0 @@
-config KERNEL_DEBUG_FS
-	bool "Compile the kernel with Debug FileSystem enabled"
-	default y
-	help
-	  debugfs is a virtual file system that kernel developers use to put
-	  debugging files into. Enable this option to be able to read and
-	  write to these files.
-
-config KERNEL_PERF_EVENTS
-	bool
-	default n
-
-config KERNEL_PROFILING
-	bool "Compile the kernel with profiling enabled"
-	default n
-	select KERNEL_PERF_EVENTS
-	help
-	  Enable the extended profiling support mechanisms used by profilers such
-	  as OProfile.
-
-config KERNEL_KALLSYMS
-	bool "Compile the kernel with symbol table information"
-	default y
-	help
-	  This will give you more information in stack traces from kernel oopses
-
-config KERNEL_FTRACE
-	bool "Compile the kernel with tracing support"
-	default n
-
-config KERNEL_FTRACE_SYSCALLS
-	bool "Trace system calls"
-	depends on KERNEL_FTRACE
-	default n
-
-config KERNEL_ENABLE_DEFAULT_TRACERS
-	bool "Trace process context switches and events"
-	depends on KERNEL_FTRACE
-	default n
-
-config KERNEL_DEBUG_KERNEL
-	bool
-	default n
-
-config KERNEL_DEBUG_INFO
-	bool "Compile the kernel with debug information"
-	default y
-	select KERNEL_DEBUG_KERNEL
-	help
-	  This will compile your kernel and modules with debug information.
-
-config KERNEL_DEBUG_LL_UART_NONE
-	bool
-	default n
-	depends on arm
-
-config KERNEL_DEBUG_LL
-	bool
-	default n
-	depends on arm
-	select KERNEL_DEBUG_LL_UART_NONE
-	help
-	  ARM low level debugging
-
-config KERNEL_EARLY_PRINTK
-	bool "Compile the kernel with early printk"
-	default n
-	depends on arm
-	select KERNEL_DEBUG_KERNEL
-	select KERNEL_DEBUG_LL if arm
-	help
-	  Compile the kernel with early printk support.
-	  This is only useful for debugging purposes to send messages
-	  over the serial console in early boot.
-	  Enable this to debug early boot problems.
-
-config KERNEL_AIO
-	bool "Compile the kernel with asynchronous IO support"
-	default n
-
-config KERNEL_DIRECT_IO
-	bool "Compile the kernel with direct IO support"
-	default n
-
-config KERNEL_MAGIC_SYSRQ
-	bool "Compile the kernel with SysRq support"
-	default y
-
-config KERNEL_COREDUMP
-	bool
-
-config KERNEL_ELF_CORE
-	bool "Enable process core dump support"
-	select KERNEL_COREDUMP
-	default y
-
-config KERNEL_PROVE_LOCKING
-	bool "Enable kernel lock checking"
-	select KERNEL_DEBUG_KERNEL
-	default n
-
-config KERNEL_PRINTK_TIME
-	bool "Enable printk timestamps"
-	default y
-
-config KERNEL_RELAY
-	bool
-
-config KERNEL_KEXEC
-	bool "Enable kexec support"
-
-config USE_RFKILL
-	bool "Enable rfkill support"
-	default RFKILL_SUPPORT
-
-#
-# CGROUP support symbols
-#
-
-config KERNEL_CGROUPS
-	bool "Enable kernel cgroups"
-	default n
-
-if KERNEL_CGROUPS
-
-	config KERNEL_CGROUP_DEBUG
-		bool "Example debug cgroup subsystem"
-		default n
-		help
-		  This option enables a simple cgroup subsystem that
-		  exports useful debugging information about the cgroups
-		  framework.
-
-	config KERNEL_FREEZER
-		bool
-		default y if KERNEL_CGROUP_FREEZER
-
-	config KERNEL_CGROUP_FREEZER
-		bool "Freezer cgroup subsystem"
-		default n
-		help
-		  Provides a way to freeze and unfreeze all tasks in a
-		  cgroup.
-
-	config KERNEL_CGROUP_DEVICE
-		bool "Device controller for cgroups"
-		default y
-		help
-		  Provides a cgroup implementing whitelists for devices which
-		  a process in the cgroup can mknod or open.
-
-	config KERNEL_CPUSETS
-		bool "Cpuset support"
-		default n
-		help
-		  This option will let you create and manage CPUSETs which
-		  allow dynamically partitioning a system into sets of CPUs and
-		  Memory Nodes and assigning tasks to run only within those sets.
-		  This is primarily useful on large SMP or NUMA systems.
-
-	config KERNEL_PROC_PID_CPUSET
-		bool "Include legacy /proc/<pid>/cpuset file"
-		default n
-		depends on KERNEL_CPUSETS
-
-	config KERNEL_CGROUP_CPUACCT
-		bool "Simple CPU accounting cgroup subsystem"
-		default n
-		help
-		  Provides a simple Resource Controller for monitoring the
-		  total CPU consumed by the tasks in a cgroup.
-
-	config KERNEL_RESOURCE_COUNTERS
-		bool "Resource counters"
-		default n
-		help
-		  This option enables controller independent resource accounting
-		  infrastructure that works with cgroups.
-
-	config KERNEL_MM_OWNER
-		bool
-		default y if KERNEL_MEMCG
-
-	config KERNEL_MEMCG
-		bool "Memory Resource Controller for Control Groups"
-		default n
-		depends on KERNEL_RESOURCE_COUNTERS
-		help
-		  Provides a memory resource controller that manages both anonymous
-		  memory and page cache. (See Documentation/cgroups/memory.txt)
-
-		  Note that setting this option increases fixed memory overhead
-		  associated with each page of memory in the system. By this,
-		  20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
-		  usage tracking struct at boot. Total amount of this is printed out
-		  at boot.
-
-		  Only enable when you're ok with these trade offs and really
-		  sure you need the memory resource controller. Even when you enable
-		  this, you can set "cgroup_disable=memory" at your boot option to
-		  disable memory resource controller and you can avoid overheads.
-		  (and lose benefits of memory resource controller)
-
-		  This config option also selects MM_OWNER config option, which
-		  could in turn add some fork/exit overhead.
-
-	config KERNEL_MEMCG_SWAP
-		bool "Memory Resource Controller Swap Extension"
-		default n
-		depends on KERNEL_MEMCG
-		help
-		  Add swap management feature to memory resource controller. When you
-		  enable this, you can limit mem+swap usage per cgroup. In other words,
-		  when you disable this, memory resource controller has no cares to
-		  usage of swap...a process can exhaust all of the swap. This extension
-		  is useful when you want to avoid exhaustion swap but this itself
-		  adds more overheads and consumes memory for remembering information.
-		  Especially if you use 32bit system or small memory system, please
-		  be careful about enabling this. When memory resource controller
-		  is disabled by boot option, this will be automatically disabled and
-		  there will be no overhead from this. Even when you set this config=y,
-		  if boot option "swapaccount=0" is set, swap will not be accounted.
-		  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
-		  size is 4096bytes, 512k per 1Gbytes of swap.
-
-	config KERNEL_MEMCG_SWAP_ENABLED
-		bool "Memory Resource Controller Swap Extension enabled by default"
-		default n
-		depends on KERNEL_MEMCG_SWAP
-		help
-		  Memory Resource Controller Swap Extension comes with its price in
-		  a bigger memory consumption. General purpose distribution kernels
-		  which want to enable the feature but keep it disabled by default
-		  and let the user enable it by swapaccount boot command line
-		  parameter should have this option unselected.
-		  For those who want to have the feature enabled by default should
-		  select this option (if, for some reason, they need to disable it
-		  then swapaccount=0 does the trick).
-
-
-	config KERNEL_MEMCG_KMEM
-		bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
-		default n
-		depends on KERNEL_MEMCG
-		help
-		  The Kernel Memory extension for Memory Resource Controller can limit
-		  the amount of memory used by kernel objects in the system. Those are
-		  fundamentally different from the entities handled by the standard
-		  Memory Controller, which are page-based, and can be swapped. Users of
-		  the kmem extension can use it to guarantee that no group of processes
-		  will ever exhaust kernel resources alone.
-
-	config KERNEL_PERF_EVENTS
-		bool
-		default y if KERNEL_CGROUP_PERF
-
-	config KERNEL_CGROUP_PERF
-		bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
-		default n
-		help
-		  This option extends the per-cpu mode to restrict monitoring to
-		  threads which belong to the cgroup specified and run on the
-		  designated cpu.
-
-	menuconfig KERNEL_CGROUP_SCHED
-		bool "Group CPU scheduler"
-		default n
-		help
-		  This feature lets CPU scheduler recognize task groups and control CPU
-		  bandwidth allocation to such task groups. It uses cgroups to group
-		  tasks.
-
-	if KERNEL_CGROUP_SCHED
-
-		config KERNEL_FAIR_GROUP_SCHED
-			bool "Group scheduling for SCHED_OTHER"
-			default n
-
-		config KERNEL_CFS_BANDWIDTH
-			bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
-			default n
-			depends on KERNEL_FAIR_GROUP_SCHED
-			help
-			  This option allows users to define CPU bandwidth rates (limits) for
-			  tasks running within the fair group scheduler.  Groups with no limit
-			  set are considered to be unconstrained and will run with no
-			  restriction.
-			  See tip/Documentation/scheduler/sched-bwc.txt for more information.
-
-		config KERNEL_RT_GROUP_SCHED
-			bool "Group scheduling for SCHED_RR/FIFO"
-			default n
-			help
-			  This feature lets you explicitly allocate real CPU bandwidth
-			  to task groups. If enabled, it will also make it impossible to
-			  schedule realtime tasks for non-root users until you allocate
-			  realtime bandwidth for them.
-
-	endif
-
-	config KERNEL_BLK_CGROUP
-		bool "Block IO controller"
-		default y
-		help
-		  Generic block IO controller cgroup interface. This is the common
-		  cgroup interface which should be used by various IO controlling
-		  policies.
-
-		  Currently, CFQ IO scheduler uses it to recognize task groups and
-		  control disk bandwidth allocation (proportional time slice allocation)
-		  to such task groups. It is also used by bio throttling logic in
-		  block layer to implement upper limit in IO rates on a device.
-
-		  This option only enables generic Block IO controller infrastructure.
-		  One needs to also enable actual IO controlling logic/policy. For
-		  enabling proportional weight division of disk bandwidth in CFQ, set
-		  CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
-		  CONFIG_BLK_DEV_THROTTLING=y.
-
-	config KERNEL_DEBUG_BLK_CGROUP
-		bool "Enable Block IO controller debugging"
-		default n
-		depends on KERNEL_BLK_CGROUP
-		help
-		  Enable some debugging help. Currently it exports additional stat
-		  files in a cgroup which can be useful for debugging.
-
-	config KERNEL_NET_CLS_CGROUP
-		bool "Control Group Classifier"
-		default y
-
-	config KERNEL_NETPRIO_CGROUP
-		bool "Network priority cgroup"
-		default y
-
-endif
-
-#
-# Namespace support symbols
-#
-
-config KERNEL_NAMESPACES
-	bool "Enable kernel namespaces"
-	default n
-
-if KERNEL_NAMESPACES
-
-	config KERNEL_UTS_NS
-		bool "UTS namespace"
-		default y
-		help
-		  In this namespace tasks see different info provided
-		  with the uname() system call
-
-	config KERNEL_IPC_NS
-		bool "IPC namespace"
-		default y
-		help
-		  In this namespace tasks work with IPC ids which correspond to
-		  different IPC objects in different namespaces.
-
-	config KERNEL_USER_NS
-		bool "User namespace (EXPERIMENTAL)"
-		default y
-		help
-		  This allows containers, i.e. vservers, to use user namespaces
-		  to provide different user info for different servers.
-
-	config KERNEL_PID_NS
-		bool "PID Namespaces"
-		default y
-		help
-		  Support process id namespaces. This allows having multiple
-		  processes with the same pid as long as they are in different
-		  pid namespaces. This is a building block of containers.
-
-	config KERNEL_NET_NS
-		bool "Network namespace"
-		default y
-		help
-		  Allow user space to create what appear to be multiple instances
-		  of the network stack.
-
-endif
-
-#
-# LXC related symbols
-#
-
-config KERNEL_LXC_MISC
-	bool "Enable miscellaneous LXC related options"
-	default n
-
-if KERNEL_LXC_MISC
-
-	config KERNEL_DEVPTS_MULTIPLE_INSTANCES
-		bool "Support multiple instances of devpts"
-		default y
-		help
-		  Enable support for multiple instances of devpts filesystem.
-		  If you want to have isolated PTY namespaces (eg: in containers),
-		  say Y here. Otherwise, say N. If enabled, each mount of devpts
-		  filesystem with the '-o newinstance' option will create an
-		  independent PTY namespace.
-
-	config KERNEL_POSIX_MQUEUE
-		bool "POSIX Message Queues"
-		default n
-		help
-		  POSIX variant of message queues is a part of IPC. In POSIX message
-		  queues every message has a priority which decides about succession
-		  of receiving it by a process. If you want to compile and run
-		  programs written e.g. for Solaris with use of its POSIX message
-		  queues (functions mq_*) say Y here.
-
-		  POSIX message queues are visible as a filesystem called 'mqueue'
-		  and can be mounted somewhere if you want to do filesystem
-		  operations on message queues.
-
-endif