aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-01-01 19:17:23 +0100
committerChristian Lamparter <chunkeey@gmail.com>2019-01-05 21:55:22 +0100
commitc8115167f946be85f812f3c94d6294b67ac8944c (patch)
tree5eecd280d999a0081af4bd015f980a933147db26
parent8d68be8057d6c689025cc236d20b96b77a6ccf30 (diff)
downloadupstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.gz
upstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.bz2
upstream-c8115167f946be85f812f3c94d6294b67ac8944c.zip
ath79: add support for devolo WiFi pro 1200i
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts51
-rw-r--r--target/linux/ath79/image/generic.mk8
4 files changed, 61 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 0b1a5f39a1..3eb0e413f3 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -10,6 +10,7 @@ ath79_setup_interfaces()
case "$board" in
avm,fritz300e|\
+ devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i|\
ocedo,koala|\
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9fc0f80569..76efa24b52 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -88,6 +88,7 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
devolo,dvl1200e|\
+ devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i)
ath10kcal_extract "art" 20480 2116
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts
new file mode 100644
index 0000000000..5900d8b487
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1200i", "qca,qca9557";
+ model = "devolo WiFi pro 1200i";
+
+ aliases {
+ led-boot = &status_blue;
+ led-failsafe = &status_red;
+ led-running = &status_blue;
+ led-upgrade = &status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_blue: status_blue {
+ label = "dvl1200i:blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ status_red: status_red {
+ label = "dvl1200i:red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&eth0 {
+ pll-data = <0xbe000000 0x80000101 0x80001313>;
+};
+
+&gmac_config {
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <3>;
+ txd-delay = <3>;
+ rgmii-enabled = <1>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 438a842182..22ba5305b1 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -170,6 +170,14 @@ define Device/devolo_dvl1200e
endef
TARGET_DEVICES += devolo_dvl1200e
+define Device/devolo_dvl1200i
+ ATH_SOC := qca9558
+ DEVICE_TITLE := devolo WiFi pro 1200i
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += devolo_dvl1200i
+
define Device/devolo_dvl1750c
ATH_SOC := qca9558
DEVICE_TITLE := devolo WiFi pro 1750c