aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Crispin <john@phrozen.org>2021-02-02 16:29:58 +0100
committerDaniel Golle <daniel@makrotopia.org>2021-02-28 01:20:53 +0000
commitaa94e34c1d7ce40684ec01b8ddc056548ecd34f0 (patch)
treea2b20a0f0efdcc891b82f51ba98db7de7ad2eec5
parent7a6d0748247e23fe976bc400e9802db903d20b47 (diff)
downloadupstream-aa94e34c1d7ce40684ec01b8ddc056548ecd34f0.tar.gz
upstream-aa94e34c1d7ce40684ec01b8ddc056548ecd34f0.tar.bz2
upstream-aa94e34c1d7ce40684ec01b8ddc056548ecd34f0.zip
mediatek: add Linksys E8450 support
The Linksys E8450, also known as Belkin RT3200, is a dual-band IEEE 802.11bgn/ac/ax router based on MediaTek MT7622BV and MediaTek MT7915AN chips. FCC: K7S-03571 and K7S-03572 Hardware highlights: - CPU: MediaTek MT7622BV (2x ARM Cortex-A53 @ 1350 MHz max.) - RAM: 512MB DDR3 - Flash: 128MB SPI-NAND (2k+64) - Ethernet: MT7531BE switch with 5 1000Base-T ports CPU port connected with 2500Base-X - WiFi 2.4 GHz: 802.11bgn 4T4R built-in antennas MT7622VB built-in - WiFi 5 GHz: 802.11ac/ax 4T4R built-in antennas MT7915AN chip on-board via PCIe MT7975AN front-end - Buttons: Reset and WPS - LEDS: 3 user controllable LEDs, 4 wired to switch - USB: USB2.0, single port - no Bluetooth (supported by SoC, not wired on board) - Serial: JST PH 2.0MM 6 Pin connector inside device ----_____________---- [ GND RX - TX - - ] --------------------- - JTAG: unpopulated ARM JTAG 20-pin connector (works) This commit adds support for the device in a way that is compatible with the vendor firmware's bootloader and dual-boot flash layout, the resulting image can directly be flashed using the vendor firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-rw-r--r--target/linux/mediatek/dts/mt7622-linksys-e8450.dts486
-rw-r--r--target/linux/mediatek/image/mt7622.mk12
-rwxr-xr-xtarget/linux/mediatek/mt7622/base-files/etc/board.d/01_leds18
-rwxr-xr-xtarget/linux/mediatek/mt7622/base-files/etc/board.d/02_network13
-rwxr-xr-xtarget/linux/mediatek/mt7622/base-files/etc/init.d/bootcount11
-rwxr-xr-xtarget/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh8
-rw-r--r--target/linux/mediatek/patches-5.10/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch122
7 files changed, 667 insertions, 3 deletions
diff --git a/target/linux/mediatek/dts/mt7622-linksys-e8450.dts b/target/linux/mediatek/dts/mt7622-linksys-e8450.dts
new file mode 100644
index 0000000000..719e1d9230
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7622-linksys-e8450.dts
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Linksys E8450";
+ compatible = "linksys,e8450", "mediatek,mt7622";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ factory {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_power: power_blue {
+ label = "power:blue";
+ gpios = <&pio 95 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_orange {
+ label = "power:orange";
+ gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ inet_blue {
+ label = "inet:blue";
+ gpios = <&pio 97 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ inet_orange {
+ label = "inet:orange";
+ gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_pins>;
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "okay";
+};
+
+&slot0 {
+ mt7915@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x05000>;
+ };
+};
+
+&pio {
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
+ */
+// asm_sel {
+// gpio-hog;
+// gpios = <90 GPIO_ACTIVE_HIGH>;
+// output-high;
+// };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
+&sata {
+ status = "disabled";
+};
+
+&sata_phy {
+ status = "disabled";
+};
+
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+
+ spi_nand@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ mediatek,bmt-v2;
+ mediatek,bmt-table-size = <0x1000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Preloader";
+ reg = <0x00000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "ATF";
+ reg = <0x80000 0x0040000>;
+ };
+
+ partition@c0000 {
+ label = "u-boot";
+ reg = <0xc0000 0x0080000>;
+ };
+
+ partition@140000 {
+ label = "u-boot-env";
+ reg = <0x140000 0x0080000>;
+ };
+
+ factory: partition@1c0000 {
+ label = "factory";
+ reg = <0x1c0000 0x0100000>;
+ };
+
+ partition@300000 {
+ label = "devinfo";
+ reg = <0x300000 0x020000>;
+ };
+
+ partition@320000 {
+ label = "senv";
+ reg = <0x320000 0x020000>;
+ };
+
+ partition@360000 {
+ label = "bootseq";
+ reg = <0x360000 0x020000>;
+ };
+
+ partition@500000 {
+ label = "firmware1";
+ compatible = "denx,fit";
+ openwrt,cmdline-match = "mtdparts=master";
+ reg = <0x500000 0x1E00000>;
+ };
+
+ partition@2300000 {
+ label = "firmware2";
+ compatible = "denx,fit";
+ openwrt,cmdline-match = "mtdparts=slave";
+ reg = <0x2300000 0x1E00000>;
+ };
+
+ partition@4100000 {
+ label = "data";
+ reg = <0x4100000 0x1900000>;
+ };
+
+ partition@5100000 {
+ label = "mfg";
+ reg = <0x5a00000 0x1400000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <&reg_3p3v>;
+ vbus-supply = <&reg_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
+
+&wmac {
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ status = "okay";
+};
diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk
index 9bf4d6a97a..dce1fb2055 100644
--- a/target/linux/mediatek/image/mt7622.mk
+++ b/target/linux/mediatek/image/mt7622.mk
@@ -38,6 +38,18 @@ define Device/elecom_wrc-2533gent
endef
TARGET_DEVICES += elecom_wrc-2533gent
+define Device/linksys_e8450
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E8450
+ DEVICE_ALT0_VENDOR := Belkin
+ DEVICE_ALT0_MODEL := RT3200
+ DEVICE_DTS := mt7622-linksys-e8450
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk \
+ kmod-mt7615e kmod-mt7615-firmware kmod-mt7915e
+endef
+TARGET_DEVICES += linksys_e8450
+
define Device/mediatek_mt7622-rfb1
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 rfb1 AP
diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/01_leds b/target/linux/mediatek/mt7622/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..e74944a65f
--- /dev/null
+++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/01_leds
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case $board in
+linksys,e8450)
+ ucidef_set_led_netdev "wan" "WAN" "inet:blue" "wan"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
index 3a409c8ec9..3d2b9ffe49 100755
--- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network
@@ -10,9 +10,8 @@ mediatek_setup_interfaces()
case $board in
bananapi,bpi-r64-rootdisk|\
- bananapi,bpi-r64)
- ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" wan
- ;;
+ bananapi,bpi-r64|\
+ linksys,e8450|\
mediatek,mt7622-rfb1)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
;;
@@ -31,7 +30,15 @@ mediatek_setup_macs()
local board="$1"
case $board in
+ linksys,e8450)
+ wan_mac=$(mtd_get_mac_ascii devinfo wan_mac_addr)
+ lan_mac=$(mtd_get_mac_ascii devinfo lan_mac_addr)
+ label_mac=$wan_mac
+ ;;
esac
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}
board_config_update
diff --git a/target/linux/mediatek/mt7622/base-files/etc/init.d/bootcount b/target/linux/mediatek/mt7622/base-files/etc/init.d/bootcount
new file mode 100755
index 0000000000..bc4eeb6530
--- /dev/null
+++ b/target/linux/mediatek/mt7622/base-files/etc/init.d/bootcount
@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+ case $(board_name) in
+ linksys,e8450)
+ mtd erase senv || true
+ ;;
+ esac
+}
diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
index 8144476943..95ac8b5657 100755
--- a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,14 @@ platform_do_upgrade() {
mediatek,mt7622,ubi)
nand_do_upgrade "$1"
;;
+ linksys,e8450)
+ if grep -q mtdparts=slave /proc/cmdline; then
+ PART_NAME=firmware2
+ else
+ PART_NAME=firmware1
+ fi
+ default_do_upgrade "$1"
+ ;;
*)
default_do_upgrade "$1"
;;
diff --git a/target/linux/mediatek/patches-5.10/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch b/target/linux/mediatek/patches-5.10/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch
new file mode 100644
index 0000000000..69a9297e1f
--- /dev/null
+++ b/target/linux/mediatek/patches-5.10/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch
@@ -0,0 +1,122 @@
+From ea0df4552efcdcc2806fe6eba0540b5f719d80b6 Mon Sep 17 00:00:00 2001
+From: Davide Fioravanti <pantanastyle@gmail.com>
+Date: Fri, 8 Jan 2021 15:35:24 +0100
+Subject: [PATCH 1/1] mtd: spinand: Add support for the Fidelix FM35X1GA
+
+Datasheet: http://www.hobos.com.cn/upload/datasheet/DS35X1GAXXX_100_rev00.pdf
+
+Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
+---
+ drivers/mtd/nand/spi/Makefile | 2 +-
+ drivers/mtd/nand/spi/core.c | 1 +
+ drivers/mtd/nand/spi/fidelix.c | 80 ++++++++++++++++++++++++++++++++++
+ include/linux/mtd/spinand.h | 1 +
+ 4 files changed, 83 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/mtd/nand/spi/fidelix.c
+
+--- a/drivers/mtd/nand/spi/Makefile
++++ b/drivers/mtd/nand/spi/Makefile
+@@ -1,3 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
++spinand-objs := core.o fidelix.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+ obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -755,6 +755,7 @@ static const struct nand_ops spinand_ops
+ };
+
+ static const struct spinand_manufacturer *spinand_manufacturers[] = {
++ &fidelix_spinand_manufacturer,
+ &gigadevice_spinand_manufacturer,
+ &macronix_spinand_manufacturer,
+ &micron_spinand_manufacturer,
+--- /dev/null
++++ b/drivers/mtd/nand/spi/fidelix.c
+@@ -0,0 +1,76 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2020 Davide Fioravanti <pantanastyle@gmail.com>
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_FIDELIX 0xE5
++#define FIDELIX_ECCSR_MASK 0x0F
++
++static SPINAND_OP_VARIANTS(read_cache_variants,
++ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
++
++static SPINAND_OP_VARIANTS(write_cache_variants,
++ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
++ SPINAND_PROG_LOAD(true, 0, NULL, 0));
++
++static SPINAND_OP_VARIANTS(update_cache_variants,
++ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
++ SPINAND_PROG_LOAD(false, 0, NULL, 0));
++
++static int fm35x1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *region)
++{
++ if (section > 3)
++ return -ERANGE;
++
++ region->offset = (16 * section) + 8;
++ region->length = 8;
++
++ return 0;
++}
++
++static int fm35x1ga_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *region)
++{
++ if (section > 3)
++ return -ERANGE;
++
++ region->offset = (16 * section) + 2;
++ region->length = 6;
++
++ return 0;
++}
++
++static const struct mtd_ooblayout_ops fm35x1ga_ooblayout = {
++ .ecc = fm35x1ga_ooblayout_ecc,
++ .free = fm35x1ga_ooblayout_free,
++};
++
++static const struct spinand_info fidelix_spinand_table[] = {
++ SPINAND_INFO("FM35X1GA",
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x71),
++ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
++ NAND_ECCREQ(4, 512),
++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++ &write_cache_variants,
++ &update_cache_variants),
++ SPINAND_HAS_QE_BIT,
++ SPINAND_ECCINFO(&fm35x1ga_ooblayout, NULL)),
++};
++
++static const struct spinand_manufacturer_ops fidelix_spinand_manuf_ops = {
++};
++
++const struct spinand_manufacturer fidelix_spinand_manufacturer = {
++ .id = SPINAND_MFR_FIDELIX,
++ .name = "Fidelix",
++ .chips = fidelix_spinand_table,
++ .nchips = ARRAY_SIZE(fidelix_spinand_table),
++ .ops = &fidelix_spinand_manuf_ops,
++};
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -238,6 +238,7 @@ struct spinand_manufacturer {
+ };
+
+ /* SPI NAND manufacturers */
++extern const struct spinand_manufacturer fidelix_spinand_manufacturer;
+ extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
+ extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+ extern const struct spinand_manufacturer micron_spinand_manufacturer;